Broadband configuration utility

Hello All,I recently had my modem replaced and I set my password in the broadband configuration utility as my wifi key. I have made about three attempts to login to the utility tonight and it iwll not accept my password and I keep getting locked out of the application. I have to wait 10 mins and then try again. Does anyone know how to reset your password for the configuration utility?All info much appreciated.Thanks Karen

Not sure if there is a way to do this in network utility, but I usually use this to test my speeds http://www.speakeasy.net/speedtest/
Pick a server close to you and wait for the test to complete. It seems to work pretty well.
AL PowerBook 17 Mac OS X (10.4.7)

Similar Messages

My brother used his Verizon Wireless SIM to activate my factory unlocked iphone 5s. Now, I can't access the cellular data network option to change APN settings for my new carrier. Already tried configuration utility and factory resets.

So as the title says, after I got my iPhone 5s from apple, factory unlocked, my brother used his sim card in it for a moment to allow it to be registered and usable on WIFI until I made it to Japan. Now that I have a data SIM card, I have to input specific APN settings, which are located in settings>cellular>cellular data network, however, cellular data network is not available as an option. I have reset the phone multiple times with and without backups and with and without the new sim in the phone. I have also used the configuration utility to try to put the APN settings in the phone. I contacted Apple and they didn't really have an answer as to what i should do. My brother checked his Verizon account and my phone does not show up as one of his devices, so right now I'm stuck with and incredibly expensive iPod. Does anyone have any idea what I can do to remedy this? I am unable to contact Verizon via telephone myself as I have no phone service. Any help would be greatly, greatly appreciated.

You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada

Multiple from e-mailaddresses / one account / iphone configuration utility

I trie to configure my e-mail account on my iphone. This works fine, when there is one e-mailaddress per account. But when I want to configure it to have multiple from-e-mailaddresses aka aliases I can choose to sent my mail from, there I stuck.
What I tried till now but without any success is
use the "name1 <[email protected]>, name2 <[email protected]>" syntax
leaf it blank and do it manually when the profile is installed, what works, but still just for one e-mailaddress
who could help?

thx for your answer
at the provider end every thing is configured the way it should
you know the way to configure other e-mail-addresses in iOS manually: Preferences > Mail, Contacts, Calendar > yourMailAccount > yourMailAccount > E-Mail yourEMailAddress
There you can put in your aliases, which enables you to select, from which address you send your e-mail from
the same thing you can do in Apple Mail, with the "name1 [email protected], name2 [email protected]" syntax entered in the Email Address field in Account Information in the preferences
But what to do, if you want to configure your iPhone with the iphone configuration utility?
if you leaf the from-address blank, you can enter just one address, the above mentioned syntax, that works for Apple Mail, doesn't
And the question for the super hero out there: How to do this in addition with certificates?

Purpose of Configuration utility and shared services????

What is the configuration utility ? what is the purpose of this.
what is the shared services and purpose.
Plese do not say " interview questions, please refer docs" .
Please i need a brief just for some idea.
Regards
Eshwar

Config Utility within Shared Services is to configure the Essbase Applications which are designed to work with Shared Services.
With the Configuration Utility, you can configure individual applications once they are registered with Shared Services. You can:
1) Deploy to Application Servers
2) Configure Repositories
3) Choose Application specific option
Depending upon which application you are configuring, you will see different options.
Shared services, as the name suggests, is to manage all the shared components within all the Hyperion applications which can work with Shared Services. Apart from config utility, another big use of its is to manage the users.
Hope this helps.
Nitin Malhotra

IPhone Configuration utility locked my phone now passcode doesn't work

Googled the heck out of this but haven't seen any posts even close to this problem.
I was testing the iPhone Configuration Utility, prior to deploying configurations to enterprise users. I modified the passcode settings to what i thought would be basic requirements.
I also created payloads for Restrictions, and Exchange ActiveSync, but haven't included in the post, since I am fairly certain they shouldn't have any impact to the issue.
Once I saved the profile, i deployed to my phone via email, and installed it on my device. It then locked, and will not accept the passcode that I was using before installing the "test" profile.
The only other screen that I made any change to, that refers to any sort of password/code, was in the General area:
I set a security password to control when the profile can be removed, but it is a password more than the simple four-digit that the phone appears to be looking for.
I can try 2 more times before the phone wipes, which isnt the end of the world thanks to iCloud, but I sure would like to know what happened....
Any thoughts would be greatly appreciated.
Kevin

Thanks Bonesaw, I did connect the phone to the host running ICPU, but it was still looking for some unknown passcode. I ended up putting the phone in DFU mode as suggested by Kilt, and restored the phone. This is the first I've used the iPCU, but I would have been willing to bet the authentication password for the profile wouldnt affect the device passcode. I must have done something else wrong, so I will try it again and see what happens. Thanks for responding!

How to set "Identity" of the MDM Payload from iPhone Configuration Utility?

Does anybody know how to set the "Identity" of the Mobile Device Management (MDM) payload of a Configuration Profile from iPhone Configuration Utility (iPCU)? The description says that this is the "Cryptographic credential used for authentication" and I should "Add credentials in the Credentials payload". Any help is appreciated.

The Identity field in the MDM payload section of a configuration profile can only be set AFTER you have set the correct credential in the Credentials section. If you have set the correct credential in the Credentials section, then you will (in my experience) only have one choice for Identity in the MDM payload section. It will be the correct choice fortunately.
To set the correct credential in the Credentials section of the configuration profile, you must have a valid personal certificate in the Windows certificate store. If you have a valid personal certificate in the Windows certificate store it will show up in the (very long) list of certificates you can choose from when you click on Configure in the Credentials section.
You should be prompted for the password for 'exporting your identity'. Fill in both boxes and then click on OK. The set the password again. Yes, the password must be entered three times.
At this point you can go back to the MDM payload section and everything should be OK.
Note that my comments only apply to Windows. My system is Windows 7. However, only version of Windows probably works the same.

Where does iPhone configuration utility store data?

Where does iPhone configuration utility store profiles and other data on the system? I know you can export the individual profiles to back them up, but I would like to just backup the entire iPhone Configuration Utility storage location.

Thanks for the reply. It helped me get more information on where to find it on the Mac. Here's the location for the Mac if anyone else needs the information:
Your home folder > Library > MobileDevice
There are folders in the "MobileDevice" folder that contain data for iPhone Configuration Utility (configuration profiles, device information, etc.)

Issue with iPhone configuration utility

I installed the iPhone configuration utility, create a camera restriction profile and loaded to the iPhone. Later on I restored my pc. This process deleted all my program files including the utility. I reinstalled the utility but now I cannot delete the profile. I know it is my fault because I lost the profile information but what can i do now? I tried an iPhone restore using iTunes but it restored all the settings including the profile. Looks like all I have left to do is erase all data and treat it as a brand new iPhone. Is this my only option?

the configuration utility doesn't allow you to select the iPCU cert which is kind of a self signed by the software. you could only select the cert that you imported.
upgraded to ipcu ver 2.2 today and it seems to fix the problem. will monitor it for several days and report back.

Issue with iphone configuration utility: eap-tls certificate selection

hello,
I am a new Apple user so if there's anything obvious, please bear with me. I also tried to search in the forum but didn't find any solution.
here's my issue:
I use iphone configuration utility v2.1 for windows. I added 2 certificates(one user cert and one CA cert) under 'credentials'. then i configured one wifi network (eap-tls using the certificate i justed added). then i synced with my phone. everything worked fine so far. however, when I tried to connect to wifi, i got error and found out that iphone was using a certificate issued by IPCU CA instead of the certificate i uploaded.
this behavior could be corrected by manually change the certificate from wireless setting. however, this has to be done every time I try to connect to wireless network which is quite frustrated. a workaround is to email me the certificate and install it from iphone. but i can't install the CA certificate via this way.
i am wondering if anyone has similar issue and how to fix this.
thanks,
-ns

the configuration utility doesn't allow you to select the iPCU cert which is kind of a self signed by the software. you could only select the cert that you imported.
upgraded to ipcu ver 2.2 today and it seems to fix the problem. will monitor it for several days and report back.

IPhone/iPad Configuration Utility - Error exporting profile

I've created a profile using iPhone Configuration Utility. When I conect the device (iPad) aiming export the created profile, returns a message "iPhone Configuration Utility has encountered an unexpected error from your mobile device. Error 'kAMDSendMessageError'. What shoud I do?

Ok. Disregard. A simple reboot after installing the ICU fixed the error message.

Can't get past configuration utility to find MAC address

How do I locate my iPod Touch's MAC address prior to completing the configuration utility so that I can add the address to a router's MAC filtering list? It doesn't appear that I can do anything with the iPod unless I first go through the config process...but if I don't have the MAC address, I can't connect to my WiFi.
Any suggestions would be appreciated.
Thanks

lllaass wrote:
With iOS 5, you can setup the iPod via wifi without connecting the iPod to a computer. However, you have connect to wifi to do that. The poster is trying to set it via wifi but can't since he does not know the MAC address to add to his router so the iPod can connect to wifi. That is why I told him to set up via USB and iTunes.
cliftonfromrichmond wrote:
Well, you don't need to add the iPod's MAC address to the router filter table until AFTER you set up the iPod.
Think about it: To set up a new iPod you use the USB/Docking cable to connect the device to a computer that is running iTunes so you can use iTunes to set the device up. During the setup process you are using the computer's network connection to transfer data to and from Apple.
After the device is set up you can retireve the MAC address.
FYI: My home network is set up with MAC filtering....
OK, fine. And what are the chances his new iPod is not running iOS5? (HINT: He didn't add an iOS tag to his post...) And if I read his post correctly this is a NEW iPod because he has to run through the configuration utility.
I'd say that based on a recent thread about a replacement iPod not running iOS5, I'd say the odds are pretty darned good that the OP's iPod is not running iOS5. With that being said, he cannot setup his iPod over a wireless connection which negates the necessity to retrieve said MAC address. He must connect his iPod to a computer.

Hyperion System 9 Issue with Configuration Utility

HI All,
We are using Hyperion System 9.3.0 and we are stuck with a very strange issue. I wanted to reconfigure Shared Services due to few issues and resink up Essbase. But i am not able of find Shared Services in the Configuration Utility. I see BI+ and Provider Services but no Shared Services.
Has anyone encountered this error? Is there a workaround to bring in Shared Services into Config Utility?
Kindly share your thoughts.

Thanks for your reply..Additional info The operating system we use is Windows 2003.
I see the folder
common/config/product/hub/<9.3.0> --- hub.xml
But i see only one xml file..I checked with the production installation..It too has only one xml file under hub/9.3..But i am able to use configuration utility in that box...
Are we missing something..Kindly let me know your thoughts..
thanks..

IPad2 w/iPhone Configuration Utility wont install profile

I'm trying to use the iPhone Configuration Utility 3.6.2 from a windows 7 SP1 on an iPad2 running iOS 7.0.3 (11B511) but when I try to install a profile nothing seems to respond. I don't get any feed back on the iPad or from iPhone Configuration Utility. I know the name is iPhone Configuration Utility but from what iv read it it compatible with iPads aswell. I need this or something like this to keep the iPad from auto-connecting to open Wi-Fi in a businesses environment. Its not as easy and putting a password on the open Wi-Fi signals because we do not control the other businesses around the one we support. Forgetting the connection also wont work once the iPad looses connection with the correct Wi-Fi and is looking to reconnect.
This is what's in the console after trying to install the profile.
==== Attached at 6/6/2014 1:56:47 PM ====
Jun 6 13:44:20 Preferences[111] <Warning>: -[APNetworksController isVisible]: _visible(1), _formSheetVisibile(0)
Jun 6 13:44:20 Preferences[111] <Warning>: -[APNetworksController updateCurrentNetworkUI]: currentTrackedNetworkSSID(HH), currentNetworkSSID(HH)
Jun 6 13:44:20 Preferences[111] <Warning>: -[APNetworksController updateCurrentNetworkUI]: Current == Tracked, nothing to do but reload the specifier
Jun 6 13:44:21 Preferences[111] <Warning>: void unloadAPTableCellImages(): unloading images
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:44:21 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:44:36 Preferences[111] <Warning>: Scan error: Error Domain=com.apple.softwareupdateservices.errors Code=40 "The operation couldnt be completed. (com.apple.softwareupdateservices.errors error 40.)" UserInfo=0x165cb010 {NSUnderlyingError=0x179e5000 "The operation couldnt be completed. (ASError error 22 - Unable to copy asset information)"}
Jun 6 13:44:36 kernel[0] <Debug>: 085768.801757 wlan.A[615] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 100, fAverageRSSI -67
Jun 6 13:44:40 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:44:40 itunescloudd[88] <Warning>: Updating media purchase history for periodic poll...
Jun 6 13:44:40 itunescloudd[88] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:44:40 syncdefaultsd[288] <Notice>: (Note ) SYDAccount: no account
Jun 6 13:45:10 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:45:10 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:45:10 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:45:10 timed[18] <Notice>: (Warn ) CoreTime: Unable to fetch NTP time.
Jun 6 13:45:11 syncdefaultsd[288] <Notice>: (Warn ) Initial test for reachability failed. Let's mark service as unreachable for now
Jun 6 13:45:12 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:45:17 imagent[56] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
Jun 6 13:45:17 imagent[56] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init.ess.apple.com/WebObjects/VCInit.woa/wa/getBag?ix=1
Jun 6 13:45:17 identityservicesd[54] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init.ess.apple.com/WebObjects/VCInit.woa/wa/getBag?ix=1
Jun 6 13:45:40 itunescloudd[88] <Warning>: Jalisco periodic update failed with error Error Domain=JaliscoImporterErrorDomain Code=-1 "The operation couldnt be completed. (JaliscoImporterErrorDomain error -1.)", trying again tomorrow.
Jun 6 13:45:40 itunescloudd[88] <Warning>: Jalisco periodic update failed with error Error Domain=JaliscoImporterErrorDomain Code=-1 "The operation couldnt be completed. (JaliscoImporterErrorDomain error -1.)", trying again tomorrow.
Jun 6 13:45:42 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:45:42 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:45:42 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:45:42 timed[18] <Notice>: (Warn ) CoreTime: Unable to fetch NTP time.
Jun 6 13:45:44 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:46:14 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:46:14 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:46:14 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:46:14 timed[18] <Notice>: (Warn ) CoreTime: Unable to fetch NTP time.
Jun 6 13:46:17 timed[18] <Notice>: (Note ) CoreTime: Fetching NTP time from "time.apple.com" count:3 timeout:60.00
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: NTP result unsuccessful (2)!
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: NTP got responses from 0 servers total
Jun 6 13:46:47 timed[18] <Notice>: (Warn ) CoreTime: NTP failed
Jun 6 13:46:47 timed[18] <Notice>: (Error) CoreTime: Failed to fetch NTP time.
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: Received source unavailable from "NTP"
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: Not setting system time to 06/06/2014 20:46:47 from NTP because time is unchanged
Jun 6 13:46:47 timed[18] <Notice>: (Note ) CoreTime: Want active time in -0.00hrs. Need active time in 37.77hrs.
Jun 6 13:48:19 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:48:19 kernel[0] <Debug>: 085992.575822 wlan.N[616] AppleBCMWLANNetManager::handleDeauth():    status = 0 , reason = 6, flags = 0x0, authtype = 0, addr = d8:eb:97:ab:51:48
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587416 wlan.N[617] AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587541 wlan.N[618] [tearDownLink] AppleBCMWLAN Left BSS(down):   @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=244 ssid[ 2]='HH'
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587681 wlan.A[619] Active Ports:
Jun 6 13:48:19 kernel[0] <Debug>: 085992.587797 wlan.A[620] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:48:19 kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jun 6 13:48:19 kernel[0] <Debug>: en0::stopOutputQueues
Jun 6 13:48:19 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:48:19 kernel[0] <Debug>: 085992.588593 wlan.A[621] AppleBCMWLANNetManager::resetLinkQualityMetrics(): Report LQM as -2
Jun 6 13:48:19 Preferences[111] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Jun 6 13:48:19 Preferences[111] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x166cdb10:<VPNBundleController: 0x166cdb10>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Jun 6 13:48:19 kernel[0] <Debug>: 085992.635542 wlan.A[622] AppleBCMWLANCore::setProperties(): Active during sleep supported (false)
Jun 6 13:48:19 kernel[0] <Debug>: 085992.819125 wlan.N[623] AppleBCMWLANCore::setASSOCIATE(): [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_PSK, key = CIPHER_PMK , don't disassociate    .
Jun 6 13:48:19 kernel[0] <Debug>: 085992.861776 wlan.N[624] AppleBCMWLANCore::resetAutoCountry(): EnhancedLocaleEnabled: 0, HostCountry:0, fDefaultCountryCode:XZ, fCurrentCountryCode:XZ
Jun 6 13:48:19 kernel[0] <Debug>: 085992.990914 wlan.N[625] AppleBCMWLANJoinManager::join Beacon Info: @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-49 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:48:19 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224374 wlan.A[626] Active Ports:
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224496 wlan.A[627] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224603 wlan.A[628] AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224716 wlan.N[629] [bringUpLink] AppleBCMWLAN Joined BSS:     @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-49 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:48:20 kernel[0] <Debug>: 085993.224833 wlan.A[630] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 50, fAverageRSSI -85
Jun 6 13:48:20 kernel[0] <Debug>: AirPort: Link Up on en0
Jun 6 13:48:20 kernel[0] <Debug>: en0::startOutputQueues (0)
Jun 6 13:48:20 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:48:20 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:48:20 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:48:20 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:48:20 kernel[0] <Debug>: 085993.277251 wlan.A[631] AppleBCMWLANCore::setProperties(): Active during sleep supported (true)
Jun 6 13:48:20 kernel[0] <Debug>: 085993.288500 wlan.N[632] AppleBCMWLANCore::startRoamScan(): 3596 Delaying RoamScan; because Join Mgr Busy 1 isWaitingforIP 1
Jun 6 13:48:20 kernel[0] <Debug>: 085993.540234 wlan.N[633] AppleBCMWLANJoinManager::handleSupplicantEvent(): status = 6 WLC_SUP_KEYED, reason = 0 Other reason, flags = 0x0, authtype = 0, addr = 00:00:00:00:00:27
Jun 6 13:49:44 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:49:44 kernel[0] <Debug>: 086003.225683 wlan.N[634] AppleBCMWLANCore::checkIPv4AddressValidity(): Local IPv4 address 192.168.30.201
Jun 6 13:49:44 kernel[0] <Debug>: 086003.234526 wlan.A[635] AppleBCMWLANNetManager::receivedIPv4Address(): Received address 192.168.30.201, entering powersave mode 2
Jun 6 13:49:44 kernel[0] <Debug>: 086003.256205 wlan.N[636] AppleBCMWLANCore::startRoamScan(): 3610 starting RoamScan; MultiAPEnv:0 isdualBand:1 isOn5G:0
Jun 6 13:49:44 kernel[0] <Debug>: 086008.291336 wlan.A[637] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 100, fAverageRSSI -70
Jun 6 13:49:44 kernel[0] <Debug>: 086077.572850 wlan.N[638] AppleBCMWLANNetManager::handleDeauth():    status = 0 , reason = 6, flags = 0x0, authtype = 0, addr = d8:eb:97:ab:51:48
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584361 wlan.N[639] AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584486 wlan.N[640] [tearDownLink] AppleBCMWLAN Left BSS(down):   @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-49 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584625 wlan.A[641] Active Ports:
Jun 6 13:49:44 kernel[0] <Debug>: 086077.584739 wlan.A[642] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:49:44 kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jun 6 13:49:44 kernel[0] <Debug>: en0::stopOutputQueues
Jun 6 13:49:44 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:49:44 kernel[0] <Debug>: 086077.585529 wlan.A[643] AppleBCMWLANNetManager::resetLinkQualityMetrics(): Report LQM as -2
Jun 6 13:49:44 Preferences[111] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Jun 6 13:49:44 Preferences[111] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x166cdb10:<VPNBundleController: 0x166cdb10>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Jun 6 13:49:44 kernel[0] <Debug>: 086077.631113 wlan.A[644] AppleBCMWLANCore::setProperties(): Active during sleep supported (false)
Jun 6 13:49:44 kernel[0] <Debug>: 086077.822276 wlan.N[645] AppleBCMWLANCore::setASSOCIATE(): [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_PSK, key = CIPHER_PMK , don't disassociate    .
Jun 6 13:49:44 kernel[0] <Debug>: 086077.879917 wlan.N[646] AppleBCMWLANCore::resetAutoCountry(): EnhancedLocaleEnabled: 0, HostCountry:0, fDefaultCountryCode:XZ, fCurrentCountryCode:XZ
Jun 6 13:49:44 kernel[0] <Debug>: 086078.014398 wlan.N[647] AppleBCMWLANJoinManager::join Beacon Info: @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:49:44 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(0), associating(0)
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249466 wlan.A[648] Active Ports:
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249590 wlan.A[649] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249673 wlan.A[650] AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249784 wlan.N[651] [bringUpLink] AppleBCMWLAN Joined BSS:     @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=0 ssid[ 2]='HH'
Jun 6 13:49:45 kernel[0] <Debug>: 086078.249902 wlan.A[652] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 50, fAverageRSSI -85
Jun 6 13:49:45 kernel[0] <Debug>: AirPort: Link Up on en0
Jun 6 13:49:45 kernel[0] <Debug>: en0::startOutputQueues (0)
Jun 6 13:49:45 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:49:45 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:49:45 kernel[0] <Debug>: en0: BSSID changed to d8:eb:97:ab:51:48
Jun 6 13:49:45 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:49:45 kernel[0] <Debug>: 086078.283974 wlan.N[653] AppleBCMWLANCore::startRoamScan(): 3596 Delaying RoamScan; because Join Mgr Busy 1 isWaitingforIP 1
Jun 6 13:49:45 kernel[0] <Debug>: 086078.304788 wlan.A[654] AppleBCMWLANCore::setProperties(): Active during sleep supported (true)
Jun 6 13:49:45 kernel[0] <Debug>: 086078.559194 wlan.N[655] AppleBCMWLANJoinManager::handleSupplicantEvent(): status = 6 WLC_SUP_KEYED, reason = 0 Other reason, flags = 0x0, authtype = 0, addr = 00:00:00:00:00:49
Jun 6 13:50:19 SCHelper[289] <Notice>: active (but IDLE) sessions
Jun 6 13:50:19 kernel[0] <Debug>: 086088.250755 wlan.N[656] AppleBCMWLANCore::checkIPv4AddressValidity(): Local IPv4 address 192.168.30.201
Jun 6 13:50:19 kernel[0] <Debug>: 086088.259534 wlan.A[657] AppleBCMWLANNetManager::receivedIPv4Address(): Received address 192.168.30.201, entering powersave mode 2
Jun 6 13:50:19 kernel[0] <Debug>: 086088.268403 wlan.N[658] AppleBCMWLANCore::startRoamScan(): 3610 starting RoamScan; MultiAPEnv:0 isdualBand:1 isOn5G:0
Jun 6 13:50:19 kernel[0] <Debug>: 086098.326623 wlan.A[659] AppleBCMWLANNetManager::updateLinkQualityMetrics(): Report LQM to User Land 100, fAverageRSSI -66
Jun 6 13:50:19 SCHelper[289] <Notice>:   0x16e4c220 {port = 0x1803, caller = Preferences(111):MobileVPN, path = /Library/Preferences/SystemConfiguration/preferences.plist}
Jun 6 13:51:09 Preferences[111] <Warning>: -[WiFiManager(Private) _linkChangedWithDict:]: linkdown(1), associating(0)
Jun 6 13:51:09 kernel[0] <Debug>: 086162.568087 wlan.N[660] AppleBCMWLANNetManager::handleDeauth():    status = 0 , reason = 3, flags = 0x0, authtype = 0, addr = d8:eb:97:ab:51:48
Jun 6 13:51:09 kernel[0] <Debug>: 086162.571402 wlan.N[661] Removing any beacons matching:    @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:51:09 kernel[0] <Debug>: 086162.571530 wlan.N[662] Also removing matching beacon:    @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580290 wlan.N[663] AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580409 wlan.N[664] [tearDownLink] AppleBCMWLAN Left BSS(down):   @0x8060d200 BSSID=d8:eb:97:ab:51:48 rssi=-48 snr= 0 rate=54 (100%) channel= 7 encryption=0x8 ap=1 failures= 0 age=84 ssid[ 2]='HH'
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580547 wlan.A[665] Active Ports:
Jun 6 13:51:09 kernel[0] <Debug>: 086162.580662 wlan.A[666] AppleBCMWLANCore::deleteAllPktFilters(): Deleted IPv4/IPv6 and Magic packet filters
Jun 6 13:51:09 kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jun 6 13:51:09 kernel[0] <Debug>: en0::stopOutputQueues
Jun 6 13:51:09 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Jun 6 13:51:09 kernel[0] <Debug>: 086162.581438 wlan.A[667] AppleBCMWLANNetManager::resetLinkQualityMetrics(): Report LQM as -2
Jun 6 13:51:09 kernel[0] <Debug>: 086162.646751 wlan.A[668] AppleBCMWLANCore::setProperties(): Active during sleep supported (false)
Jun 6 13:51:10 kernel[0] <Debug>: 086163.643552 wlan.N[669] AppleBCMWLANCore::handleIPv4AddressNotificationGated(): Local IPv4 address 0.0.0.0
Jun 6 13:51:10 configd[55] <Notice>: Captive: CNPluginHandler en0: Inactive
Jun 6 13:51:10 configd[55] <Notice>: network changed: v4(en0-:192.168.30.201) DNS- Proxy-
Jun 6 13:52:50 Preferences[111] <Warning>: void loadAPTableCellImages(): loading images
Jun 6 13:52:50 Preferences[111] <Warning>: -[APNetworksController updateCurrentNetworkUI]: currentTrackedNetworkSSID((null)), currentNetworkSSID((null))
Jun 6 13:52:51 profiled[290] <Notice>: (Note ) profiled: Service starting...
Jun 6 13:53:02 profiled[290] <Notice>: (Note ) profiled: Service stopping.
Jun 6 13:53:28 Preferences[111] <Warning>: void unloadAPTableCellImages(): unloading images
Jun 6 13:53:29 Preferences[111] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:53:29 Preferences[111] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:53:29 Preferences[111] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:54:49 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 15 usbHostConnected true pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:54:49 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 16 usbHostConnected true pairableHostConnected true unpairedPtpAllowed false
Jun 6 13:54:49 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableDetect 1
Jun 6 13:54:49 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableType USBHost
Jun 6 13:54:49 ptpd[291] <Error>: ptpd: startResponder
Jun 6 13:54:49 ptpd[291] <Notice>: Photo library available
Jun 6 13:54:49 ptpd[291] <Notice>: PTP interface has been activated at high speed.
Jun 6 13:54:50 lockdownd[51] <Notice>: 00201000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:54:50 lockdownd[51] <Notice>: 00201000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:54:50 lockdownd[51] <Notice>: 00201000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:54:50 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:54:50 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:54:50 mc_mobile_tunnel[293] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:54:50 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:54:50 mc_mobile_tunnel[294] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:54:54 lockdownd[51] <Notice>: 019c5000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:54:54 lockdownd[51] <Notice>: 019c5000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:54:54 lockdownd[51] <Notice>: 019c5000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Received time 06/06/2014 20:55:2160.00 from "MobileLockdown"
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Not setting system time to 06/06/2014 20:54:55 from NTP because time is unchanged
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Want active time in -0.00hrs. Need active time in 37.64hrs.
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Received timezone "America/Los_Angeles" from "MobileLockdown"
Jun 6 13:54:55 timed[18] <Notice>: (Note ) CoreTime: Current mcc: '0' simulated:'0'.
Jun 6 13:54:55 SpringBoard[33] <Notice>: 2014-06-06 13:54:55.113|33|0x17d09ca0: Region monitoring not available or enabled. Trigger ignored!
Jun 6 13:54:55 lockdownd[51] <Notice>: 01ac9000 __copy_itunes_value_block_invoke: com.apple.mobile.iTunes.store/downloaded-apps -> (null)
Jun 6 13:54:56 accountsd[79] <Notice>: 2014-06-06 13:54:56.199 accountsd[79:3947]: Cannot check access to a private account type: (null)
Jun 6 13:54:56 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:54:56 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:54:56 atc[296] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:54:56 atc[296] <Notice>: PLMigrationLog <t:0x1659bbc0> loadFileSystemDataIntoDatabase called from +[PLPhotoLibrary _doFilesystemImportIfNeeded]
Jun 6 13:54:56 assetsd[103] <Notice>: PLMigrationLog <t:0x145a6670> loadFileSystemDataIntoDatabase called from -[PersistentURLTranslatorGatekeeper importFileSytemAssetsNoWaitHandler:connection:]
Jun 6 13:54:56 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:54:56 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:54:56 geod[262] <Warning>: Can't get bundle identifier for process 261
Jun 6 13:54:56 medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] ending transaction <__NSConcreteUUID 0x16d52500> 7FC7AC47-B9A4-4F1D-A704-2014CC662B4A. shouldCommit=0.
Jun 6 13:54:56 medialibraryd[89] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:54:56 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:54:56 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:54:56 deleted[261] <Error>: 0x387000 __DeleteLibrarian_block_invoke: unable to determine evictable space: The operation couldnt be completed. (LibrarianErrorDomain error 10 - Unable to configure the collection.)
Jun 6 13:55:00 mc_mobile_tunnel[293] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:00 mc_mobile_tunnel[294] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:12 lockdownd[51] <Notice>: 00201000 _select_socket: receive secure message timeout!
Jun 6 13:55:16 com.apple.launchd[1] <Notice>: (com.apple.iCloudKeychainStats) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
Jun 6 13:55:16 com.apple.launchd[1] <Notice>: (com.apple.iCloudKeychainStats) Job failed to exec(3) for weird reason: 2
Jun 6 13:55:16 geocorrectiond[300] <Warning>: /SourceCache/Maps/Maps-1398.27.4/iOS/geocorrectiond/MCAddressCorrector.m:119 0x17555570 startProcessing - failed. Not authorized (0)
Jun 6 13:55:16 syncdefaultsd[301] <Notice>: (Note ) SYDAccount: no account
Jun 6 13:55:21 daily[302] <Notice>: (0x3d6e318c) carrousel: Could not rmdir /private/var/tmp/MediaCache: Directory not empty
Jun 6 13:55:21 daily[302] <Notice>: (0x3d6e318c) carrousel: Could not rmdir /private/var/tmp/launchd: Directory not empty
Jun 6 13:55:22 mobile_assertion_agent[257] <Notice>: service_one_connection: Connection closed for client (null).
Jun 6 13:55:32 lockdownd[51] <Notice>: 019c5000 _select_socket: receive secure message timeout!
Jun 6 13:55:32 lockdownd[51] <Notice>: 019c5000 _receive_message: walk away - non-SSL 1
Jun 6 13:55:37 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:55:37 mc_mobile_tunnel[303] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:55:42 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:55:42 mc_mobile_tunnel[304] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:55:42 profiled[305] <Notice>: (Note ) profiled: Service starting...
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: Profile MCConfigurationProfile 0x16d6f8b0 has no friendly name.
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: 0x16d6f8b0 Can't parse profile: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: Failed to parse profile data. Error: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:55:42 profiled[305] <Notice>: (Error) MC: Profile cannot be queued for installation. Error: NSError:
Desc   : Invalid Profile
Sugg   : The profile Profile is invalid.
US Desc: Invalid Profile
US Sugg: The profile Profile is invalid.
Domain : MCInstallationErrorDomain
Code   : 4000
Type   : MCFatalError
...Underlying error:
NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:55:47 mc_mobile_tunnel[303] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:52 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:55:52 mc_mobile_tunnel[306] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:55:52 mc_mobile_tunnel[304] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:55:53 profiled[305] <Notice>: (Note ) profiled: Service stopping.
Jun 6 13:55:59 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 17 usbHostConnected false pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:55:59 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 18 usbHostConnected false pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:55:59 ptpd[291] <Notice>: PTP interface has been deactivated.
Jun 6 13:55:59 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableDetect 0
Jun 6 13:55:59 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableType Detached
Jun 6 13:55:59 kernel[0] <Debug>: virtual IOReturn AppleUSBDeviceMux::message(UInt32, IOService *, void *) - kMessageInterfaceWasDeActivated
Jun 6 13:55:59 kernel[0] <Debug>: AppleUSBDeviceMux::reportStats: USB mux statistics:
Jun 6 13:55:59 kernel[0] <Debug>: USB mux: 446 reads / 0 errors, 931 writes / 0 errors
Jun 6 13:55:59 kernel[0] <Debug>: USB mux: 0 short packets, 0 dups
Jun 6 13:55:59 iapd[105] <Warning>: ERROR - /SourceCache/iapd/iapd-1385.3.1/iapd/IAPPortManager.mm:-[IAPPortManager availableCurrentFromAccInMa] - 228 IOAccessoryManagerGetUSBCurrentLimitBase failed 0xe00002d9
Jun 6 13:55:59 medialibraryd[89] <Warning>: {MediaLibrary} [MediaLibraryService] Cancelling any active or suspended import operations in progress for process <unknown process> (process ID = 296)
Jun 6 13:55:59 medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] Cleaning up any remaining transactions for ended process <unknown process> (process ID = 296)
Jun 6 13:56:02 mc_mobile_tunnel[306] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:18 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 19 usbHostConnected true pairableHostConnected false unpairedPtpAllowed false
Jun 6 13:56:18 lockdownd[51] <Notice>: 3d6e318c _bump_connection_count: connectionCount now 20 usbHostConnected true pairableHostConnected true unpairedPtpAllowed false
Jun 6 13:56:18 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableDetect 1
Jun 6 13:56:18 kernel[0] <Debug>: AppleD1946PMUPowerSource: AppleUSBCableType USBHost
Jun 6 13:56:18 ptpd[307] <Error>: ptpd: startResponder
Jun 6 13:56:18 ptpd[307] <Notice>: Photo library available
Jun 6 13:56:18 ptpd[307] <Notice>: PTP interface has been activated at high speed.
Jun 6 13:56:18 lockdownd[51] <Notice>: 01943000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:56:18 lockdownd[51] <Notice>: 01943000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:56:18 lockdownd[51] <Notice>: 01943000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Received time 06/06/2014 20:56:4560.00 from "MobileLockdown"
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Not setting system time to 06/06/2014 20:56:18 from NTP because time is unchanged
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Want active time in -0.00hrs. Need active time in 37.61hrs.
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Received timezone "America/Los_Angeles" from "MobileLockdown"
Jun 6 13:56:18 timed[18] <Notice>: (Note ) CoreTime: Current mcc: '0' simulated:'0'.
Jun 6 13:56:19 SpringBoard[33] <Notice>: 2014-06-06 13:56:19.016|33|0x199335a0: Region monitoring not available or enabled. Trigger ignored!
Jun 6 13:56:19 lockdownd[51] <Notice>: 01a47000 __copy_itunes_value_block_invoke: com.apple.mobile.iTunes.store/downloaded-apps -> (null)
Jun 6 13:56:20 accountsd[79] <Notice>: 2014-06-06 13:56:20.203 accountsd[79:10843]: Cannot check access to a private account type: (null)
Jun 6 13:56:20 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:56:20 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:56:20 atc[309] <Warning>: {MediaLibrary} Database validation succeeded
Jun 6 13:56:20 atc[309] <Notice>: PLMigrationLog <t:0x16e3fdf0> loadFileSystemDataIntoDatabase called from +[PLPhotoLibrary _doFilesystemImportIfNeeded]
Jun 6 13:56:20 assetsd[103] <Notice>: PLMigrationLog <t:0x145a6ad0> loadFileSystemDataIntoDatabase called from -[PersistentURLTranslatorGatekeeper importFileSytemAssetsNoWaitHandler:connection:]
Jun 6 13:56:20 lockdownd[51] <Notice>: 01ac9000 special_case_get: MGCopyAnswer(kMGQInternationalMobileEquipmentIdentity) returned NULL
Jun 6 13:56:20 lockdownd[51] <Notice>: 01ac9000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jun 6 13:56:20 lockdownd[51] <Notice>: 01ac9000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jun 6 13:56:20 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:56:20 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:56:20 geod[262] <Warning>: Can't get bundle identifier for process 261
Jun 6 13:56:20 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:20 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:20 medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] ending transaction <__NSConcreteUUID 0x16d552c0> 0BA65AAC-C5E8-4460-B229-CD5531260D09. shouldCommit=0.
Jun 6 13:56:20 medialibraryd[89] <Warning>: {MediaLibrary} Rolling back transaction.
Jun 6 13:56:20 librariand[115] <Error>: ubiquity account is not configured (or is disabled for this client), not creating collection
Jun 6 13:56:20 librariand[115] <Error>: error in _handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
Jun 6 13:56:20 deleted[261] <Error>: 0x283000 __DeleteLibrarian_block_invoke: unable to determine evictable space: The operation couldnt be completed. (LibrarianErrorDomain error 10 - Unable to configure the collection.)
Jun 6 13:56:20 mc_mobile_tunnel[312] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:56:20 lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:20 mc_mobile_tunnel[313] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:56:26 Chas-iPad lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:56:26 Chas-iPad mc_mobile_tunnel[314] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:56:30 Chas-iPad mc_mobile_tunnel[312] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:30 Chas-iPad mc_mobile_tunnel[313] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:36 Chas-iPad mc_mobile_tunnel[314] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:56:40 Chas-iPad lockdownd[51] <Notice>: 01943000 _select_socket: receive secure message timeout!
Jun 6 13:56:40 Chas-iPad lockdownd[51] <Notice>: 01943000 _receive_message: walk away - non-SSL 1
Jun 6 13:56:59 Chas-iPad awdd[318] <Error>: CoreLocation: CLClient is deprecated. Will be obsolete soon.
Jun 6 13:58:21 Chas-iPad medialibraryd[89] <Warning>: {MediaLibrary} [MediaLibraryService] Cancelling any active or suspended import operations in progress for process <unknown process> (process ID = 309)
Jun 6 13:58:21 Chas-iPad medialibraryd[89] <Warning>: {MediaLibrary} [MLWriter] Cleaning up any remaining transactions for ended process <unknown process> (process ID = 309)
Jun 6 13:59:09 Chas-iPad lockdownd[51] <Error>: FAILURE: Failed to open property list at file:///private/var/db/launchd.db/com.apple.launchd/overrides.plist for reading. (The operation couldnt be completed. No such file or directory)
Jun 6 13:59:09 Chas-iPad mc_mobile_tunnel[319] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Note ) profiled: Service starting...
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: Profile MCConfigurationProfile 0x1453bd60 has no friendly name.
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: 0x1453bd60 Can't parse profile: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: Failed to parse profile data. Error: NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:59:09 Chas-iPad profiled[320] <Notice>: (Error) MC: Profile cannot be queued for installation. Error: NSError:
Desc   : Invalid Profile
Sugg   : The profile Profile is invalid.
US Desc: Invalid Profile
US Sugg: The profile Profile is invalid.
Domain : MCInstallationErrorDomain
Code   : 4000
Type   : MCFatalError
...Underlying error:
NSError:
Desc   : The profile Profile is invalid.
Sugg   : The required field PayloadIdentifier is missing.
US Desc: The profile Profile is invalid.
US Sugg: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1000
Type   : MCFatalError
Params : (
Profile
...Underlying error:
NSError:
Desc   : The required field PayloadIdentifier is missing.
US Desc: The required field PayloadIdentifier is missing.
Domain : MCProfileErrorDomain
Code   : 1002
Type   : MCFatalError
Params : (
PayloadIdentifier
Jun 6 13:59:19 Chas-iPad mc_mobile_tunnel[319] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jun 6 13:59:20 Chas-iPad profiled[320] <Notice>: (Note ) profiled: Service stopping.
Jun 6 14:06:17 Chas-iPad mobile_assertion_agent[257] <Notice>: service_one_connection: Connection closed for client (null).

Bump.
So i read that Apple hasnt updated the iPhone config utility for iOS7 (or at all for a while). Does anyone know of any other config utilities that would allow me to control wheather a Wi-Fi is auto connected to or not? We use iPads in a buinessness envornment and need to be able to connect to one Wi-Fi with other open Wi-Fi connections avalable (but not connected). forgetting an open network doesnt work because it will auto-connect if the iPad looses connection with the main Wi-Fi. Auto-connect should be an option on apple devices but isnt. we cannont be asked if we want to connect to an open Wi-Fi all the time.

802.1x WEP & iPhone Configuration Utility

Hi All!!
I have just arrived back from our Easter vacation to find the school I work for has changed wireless from WPA-PSK to 802.1x WEP. It didn't take long for me to change my MacBook Pro over to the new settings, but we (our IT Guys and myself) are having great difficulties with the iPhone Configuration Utility and the resulting Profile file. A continuous error message of "Unable to join the network "School_Name"".
We have been using the same configurations for the iPhone in the Configuration Utility as we did for the MacBook Pro, but I keep having the feeling that we are missing something. I am a complete novice when it comes to this side of computing, but any help would be greatly appreciated.
Here are the preferences we have been using:
*_Network Prefs_* (Taken from MacBook Pro)
Network Name: School's SSID
Security: 802.1x WEP
User Name: Domain Login Name
Password: Domain Password
*_802.1x Prefs_* (Taken from MacBook Pro)
User Name: Domain Login Name
Password: Domain Password
Wireless Network: School's SSID
Authentication: TLS
TLS Certificate: VALID
*_iPhone Configuration Utility_*
We are little stuck as what to use for the Identifier under the General Tab in the iPhone Configuration Utility.
We have set the Security Type to WEP Enterprise with the EAP Type as TLS.
Under the Credentials Tab, we have generated a "School" certificate and a "User" certificate to be uploaded. These are the same type of certificates I have installed in my KeyChain on the MAcBook Pro.
The subsequent Profile which is generated is uploaded to the iPhone via email and is installed successfully. The profile shows that it is verified. But, no connection is made. The iPhone is not even showing up on the AIS Server log.
I hope that I have supplied enough information. If not, please ask for more.
Thanks in advance.
Rodger

Update your iPhone Configuration Utility.
There is a new option under "Security Type" Called "WEP Enterprise" This is 802.1X WEP.
Have Fun

Planning Option Not Visible in Configuration Utility

Hi Everyone,
I have created a Planning Application long back (Classic Application) [9.3.1]. Now we are about to create a new application. The stramge thing is that I am not able to see the Planning option in Configuration Utility. Previously I have installed EPMA and also cofigured the same, But never used EPMA. Now I have created a user in Rdbms and tried to create a Datasource for my new application. Unable to see the option where I can create datasource. Please guide what should be done. (able to see EPMA options like deploy server, configure databse, etc)
I am able to access planning web and access my old Planning application. In fact also able to open Planning application wizard.(Here it asks for datasource).

Hi John,
I am also facing the same problem --- "planning option not shown at all in config utility". Scenario is also the same, some days ago BPMA has been installed though not in use. Planning is working properly, but now, when I want to create another datasource for another application creation, no planning option is showing.
In C:\Hyperion\common\config\product there is no planning folder exists. Could you please suggest how to resolve this issue?
Thanks & Regards.

Broadband configuration utility

Similar Messages

Maybe you are looking for