Broadband light flashing red

On my Gateway all lights are green except for Broadband 2 which is flashing red.  We have restarted the gateway multiple times and checked the wires.  Please let me know what else I can do.  Thanks!

Call 1-800-288-2020 to schedule a service call for your flashing red broadband2 light. This is a (4) hour appointment window available 7 days a week with morning 8:30-12:30, afternoons 1-4, and evenings 4-8 depending on opening slots.  Someone 18 or older needs to be at residence during this time frame, once tech arrives unknown how much time will be needed to resolve.

Similar Messages

  • T61 Battery light flashes red and green

    Hello:
    My T61(type 8891) won't start. I'm getting a series of flashes from the battery and power lights:
    A/C power connected: power light flashes green alternately and battery light flashes green then red/green.
    AC off, battery installed: power light flashes green at the same time as the battery light flashes red/green.
    This happened twice before in the past 2 weeks. After about an hour, it booted up - no problem. This time, nothing.
    Thanks in advance for any assistance.

    It started about one month ago - no known cause. The problem happened 3 times since then but each time it booted up by itself  after a half hour or so. A new motherboard is going to set me back plenty but f it's needed, I guess I must get it repaired. I'm quite handy at taking the laptop apart. I've replaced the hinge, and bezel.
    Maybe the fan is inoperable which may cause it to not boot up. Lately, I've been feeling exhaust air much warmer than before even if it's not being used. I blew the dust off it 3 weeks ago.

  • Home hub 3 broadband light flashing orange & purpl...

    Hi,
    Broadband has stopped working with a flashing orange & purple broadband light (7 days and counting)
    Have phoned bt but they failed to resolve the issue over phone - resetting, power off/on etc. Tried 4 different branded adsl filters, alternative router but still no connection. Only 1 main socket, no extensions connected, doesn't have a test facility(older style socket). Tried 17070 quiet line test - sounds clear. Phone line test reports zero faults.
    Details from home hub 3 Broadband > connection tab
    Line state: Connected
    Data Transmitted/Received (GB): 0.0 / 0.0
    Downstream: 7.938 Mbps
    Upstream: 448 Kbps
    ADSL Settings VPI/VCI: 0/38
    Type: PPPoA Modulation: G.992.1 Annex A
    Latency type: Interleaved
    Noise margin (Down/Up): 16.7 dB / 26.0 dB
    Line attenuation (Down/Up): 10.8 dB / 5.0 dB
    Output power (Down/Up): 17.9 dBm / 12.4 dBm
    FEC Events (Down/Up): 10905 / 0
    CRC Events (Down/Up): 11 / 0
    Loss of Framing (Local/Remote): 0 / 0
    Loss of Signal (Local/Remote): 0 / 0
    Loss of Power (Local/Remote): 0 / 0
    HEC Events (Down/Up): 31 / 0
    Error Seconds (Local/Remote): 121 / 3
    Broadband > Internet tab
    Connection time: Connecting  
    I suspect the issue is at the exchange, has bt disconnected me and plugged someone else in? Any thoughts welcome.

    you appear to have tried everything suggested by BT for purple/orange flashing constantly and not solved the problem.  the help pages then say if that has failed then contact technical support but I would contact the forum mods instead for help
    contact mods
    can take up to 3 working days for mods to contact you
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Why did mine stop working a few months ago? The Sys Light flashes red constantly - even after hours of being powered up.

    I bought this last year - early summer. It worked great at first.
    Sometime during the winter it stopped working with a constantly flashing red Sys light. I have tried many times to start it up, same issue even when leaving it powered up for hours. What is my next step in trouble shooting this issue?

    Call Verizon Wireless Customer Service at (800) 922-0204 and verify the device is registered and working properly from there end. Good luck!

  • Broadband light flashing orange. A "copper line fa...

    Hi all
    on Friday 20/01/12 i was using the internet as normal, no weather problems or anything abnormal happening and then as i woke on Saturday 21/01/12 i noticed my broadband (hub 3) had a blue power light, a blue wireless light but a flashing orange light, i followed the steps on the website and restarted my homehub but the still had the same problem. i then changed the adsl filters still had the same problem even tried changing the adsl lead from the socket to the hub but still had the same problem i tried in 3 extension sockets and then also the main bt openzone socket but the problem was still the same.
    i then called the bt help line where they made me re iterate the same proccesses twice of what i had already done to then finally test my line and tell me there was a "copper line fault" and the problem would be reapired by 26/01/12. i recieved the email letting me know i would be able to track the fault however when i tried the "track a fault" link it gave me the error message of that the "Sorry we cant complete your request at the moment due to technical error. Please try again" and since the 21/01/12 i have still not recieved a fault update and after many attempts at "trying again" still unable to track the progress.
    The internet is crucial to my work and i need it to be running as soon as possible. i live in an apartment and have asked my neighbours if their phone line isnt working but theirs is still working and mine is the only one that isnt, i can't seem to understand how this has happened and why mine is the only one not working, and now with the phone line and broadband not working, my work will be suffering and the implications of not having the internet will be a big impact. 
    Is anyone else having a problem with tracking their fault or had this fault before and could offer some guidance?
    really need this fault to raised as urgent and not being repaired until 26/01/12 could cripple my work.
    Also for the days you are without bt vision, broadband and calls is there a way to gain compensation?
    Any help or advice would be brilliant.
    Thanks Bradley Kent

    Keith_Beddoe wrote:
    If you live in an area with good 3G mobile coverage, you could buy a pay as you go broadband dongle.
    If the Internet is vital to your work, you should have a backup plan, as some major faults can take weeks to fix.
    Good advice for a lot of people.
    For me the Internet/email is a hobby/pastime. If it went down for  a few days it would be an annoyance/inconvenience to me but thats all, but even i have a Three 3G MiFi wireless modem standing by. Just connect up, top up and go.
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

  • My iPod Shuffle (4th Generation) flashes red when I put it in the USB drive. What is wrong and how do I fix it?

    Earlier today, I tried to use my shuffle, but for some reason, not only did it not play music, it gave a tri-tone. When I put it into the USB of my computer, the light flashed red for a moment then stopped. My iPod does not show up on iTunes nor My Computer. Can someone tell me what is wrong and how to fix this?

    Kathleen,
    Start with this Apple support document.
    http://support.apple.com/kb/TS1410
    B-rock

  • BT Homehub 3 light flashing pink/amber - BT engine...

    I wonder if anyone can help.  About a week ago we suddenly started experiencing broadband (ADSL) connection problems with the blue broadband light switching from blue to either amber or amber/pink flashing.  Various fixes were attempted; re-booting, resetting (inserting pen into little reset hole), changing ADSL filter, opening phone socket and plugging cable into internal socket etc.
    To put it into context, in a 10 minute period you get 1-2 minutes of successful connection before the hub broadband light reverts to amber/pink or just amber.  In short it is virtually unusable and completely frustrating.
    Next step was to send me a new Homehub 3 which the BT overseas helpline were convinced would fix the problem.  Guess what?  It didn’t and the problem remained.
    A a BT engineer was dispatched and visited two days ago. He checked all the wiring and in fact changed the box on the wall to one that has two outlets – one for the phone and the other for the ADSL cable i.e. so that no ADSL filter is needed.
    He measured the broadband signal coming in and it’s strong and consistent.  He genuinely couldn’t work out why the hub is therefore not allowing the broadband signal through to the PC 80%+ of the time.  Again he tried resetting and unfortunately it seemed to be working for longer than usual at which point, thinking the issue had resolved itself, he left.
    Of course, soon after he left we were back to the broadband light flashing amber/pink and just amber only for the majority of the time!
    I will of course call the helpline again to arrange another engineer visit but wonder if anyone here can shed any light on the likely problem (as the previous engineer seemed to be struggling).  Is it likely that two Homehub 3’s would have a fault or is it something in the settings at the BT end?  Is it worth asking the engineer to bring a Homehub 4 to see if that fairs any better?
    Thanks in anticipation – as you can imagine this is incredibly frustrating.

    Hi Welcome to the community forums
    Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
    once you have posted the information asked for then the community members can help you more
    Pease make sure you use the test socket when doing these tests 
    Thank You
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • HH5 Flashing Red light issues

    hello,
    experiencing strange issues with a BT Infinity 2 circuit at my property. 
    Symptoms:
    * 3 days ago the original HH5 dropped the broadband connection - it changed to an orange light with flashing red broadband symbol. No dial tone when the RJ11 is plugged into the SSFP Infinity socket but dial tone returns as soon as RJ11 unplugged. 
    * reported to BT and after typical troubleshooting they decided to send a replacement HH5 out
    * whilst waiting for this I borrowed a Draytek 2850 from work and decided to test on the circuit - bizarrely this was able to connect to BT Infinity (albeit at around 45581 Kbps instead of 75000 Kbps i was getting last week) and dial tone present on phone
    * replacement HH5 arrived today, plugged in and exactly the same symptoms as original HH5
    any ideas what could be going on?
    thanks
    Michael

    Does your phone work if just conencted to test socket with filter?  Try quiet line test. Dial 17070 option 2 should be quiet and best with corded phone
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • My NVG589 router is flashing red on the Broadband 2 line. How do I fix this?

    Hi, There were some storms that came throught my area yesterday/last night and my router now has the Broadband2 line flashing red.  I've reset my router twice now and it still keeps doing it.  It appears that this is related to my email since I haven't been able to receive email since that happened.  I can surf the web, but cannot receive email.  Help!! John

    Hi 
    You require a technician to come out. Call AT&T by dialing 800.288.2020 or live chatting with them by clicking the link below and clicking "Chat Now":
    http://www.att.com/contactus/index/internet.html
    The email issue is likely separate from this issue. When it comes to your Broadband 2 light, it's indicating a problem with one of the cable pairs within your line that needs to be checked.
    For the email part, see the link below -
    https://forums.att.com/t5/Email-Internet-Security/not-receiving-some-emails/m-p/4281027#M24758
     

  • My Curve won't turn on and no sign of flashing red light

    Hi!
    I m all new to this blackberry forum thing....anyway i have a blackberry curve and all of a sudden yesterday it just stopped working. when i looked at the phone the screen was all white so i took out the battery and put it back on thinking that it will come back up but it didnt. Then i took the battery out again and plugged it to the USB(without the battery) because ususally it comes back up, but it still didnt. i put the battery again and plugged it to the USB thinking that it needs to charge but still no since of that flashing red light. I took the battery out and put my friends battery (cos he has a curve too) but still it didnt work. I did try holding down the power (red)button still not back on. 
    I just dont understand whats wrong with it, its not like i dropped it in the water or dropped it on the floor. I didnt do anything to it. It just stopped working. 
    Im really frustrated right now...I just dont know what to do..i hope someone can help me
    THanks!

    I finally got my curve to work.  I just left it on the charger for a while and then it powered up. It seems if its a little low on power and I don't charge it relatively soon it shuts down and won't power up for awhile. I've also updated the software and cleaned out the junk files. It seems to be working fine now, go figure.
    tm

  • Flashing red Light on Photosmart D5160

    I have a 3-4 year old Photosmart which know suddenly comes with flashing red light when i try to print.
    In the display it says ERR and there are two commas or something on the bottom right. It does not match any of the problems which i can find on hp's pages.
    I received an error message on my computer when trying to print - saying something like : do not recognize usb (code 043) Port_#003 Hub_#0003.
    Can anyone help me out?
    espen

    Hi,
    Flashing amber LED does not always point to fault. Please see this bug related to system
    LED flashing amber.
    CSCsh44884 Bug Details : Appliance: No Troubleshooting for System health LED
    Status: NEW
    Symptom: The appliance hardware has a "System health LED" that may go into amber status,
    to indicate a hardware warning, and red to indicate a hardware failure.
    Conditions:
    In most situation the ACS appliance is still operative, when the light is in amber status.
    The appliance should offer better information on what condition caused this alarm, and include this either by new CLI command, or included as additional information in pakage.cab file.
    .Workaround:
    -Reload appliance
    -Verify enviromental conditions (temperature, power)
    Alternate Details:
    Symptom:
    The appliance hardware has a "System health LED" that may go into amber status, to
    indicate a hardware warning, and red to indicate a hardware failure
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&b
    ugId=CSCsh44884
    Let me know if you have any question.
    Regards,
    ~JG
    Do rate helpful posts

  • Torch 9860 wont start, no flashing red light as well

    the loading screen comes and hangs on about 80%, no red light flashing, it just sits on 80%, Please Help!!! I tried to update the device software with desktop loader, when the device is rebooted after installing it again sits on 80%
    the destop loader come with a error message " unable to connect to the device"
    Please Help!!!

    Hello jvzaveri,
    Welcome to the Blackberry Community,
    As you said you tried to update the device software with desktop loader and The Desktop unable to Connect the device . I think you you have to use force detection of your device using application loader. Here is the Article of KB 
    which might be usefull to you How to Force the detection of Blackberry Smartphone using Application Loader .
               There may be some software issue, try not to install too many apps ,install only that you really needs. Try it and let us Know.
    Good Luck
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Bold 9930 - dead and flashing red light

    Bold - Verizon 9930, died with flashing red light, non-responsive. Can connect wtih loader, re-loading latest OS for Verizon (7.1.0_rel1737_PL5.1.0.429_A7.1.0.580_Verizon_Wireless) Load fails with "application loader was unable to connect with your device" when it tries to connect with the JVM. I have tried:- fully charged known good battery (tested in another 9930)- wiping device- start without battery, insert battery when JVM message comes up- both BB desktop and Loader directly- two different PCs (no change)- different USB ports- older version of BB OS for device- many, many iterations... All end with "application loader was unable to connect with your device" Is the device scrap?  If so why?  It's not even 2 years old, out of warranty, and apparently now totally worthless.  This one is the CEO's Blackberry, and he's not happy...  If I can't resolve this, it will be the very last BB to ever see the inside of our company.  This is the second 9930 to die this way in the last 4 weeks.    

    Hello,
    Firstly...
    truckin-on wrote:
    Does RIM care about these failure issues at all I wonder?
    If you were hoping for a response from RIM, you have misunderstood the purpose of these forums. These are not a channel for any communications with, support from, nor escalation to RIM for anything. Rather, these are a user-to-user community of volunteers trying to help each other out amidst their own busy lives. So patience perhaps would be a good thing to have...
    Nevertheless, please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    While you've already validated that your battery is good, I don't think you've tried the first part of this test:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    While perhaps redundant to what you've already attempted, here are a few more things to try:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    Since you are out of warranty, your next step I suppose would be to seek in-hand support from a qualified technician to give you a proper diagnosis. Doing such at this internet distance is quite a challenge and therefore cannot replace in-hand evaluation and diagnosis.
    Good luck and let us know!

  • Red Light flashing help

    Hi, I have recently got a curve and after loading the pc software & connected my blackberry to it, it updated etc then my phone went blank and has 2 blinking red lights flashing...anyone know how I can reset phone thanks

    Hi..
    Try the below link for the OS downloads..
    https://developer.blackberry.com/blackberry10devalpha/devalpha_update.html
    thanks..
    Please update the result after applied..
    Thanks

  • Flashing red light on my ACS 4.1

    Hello, I have a flashing red light on my ACS. I have searched on Cisco.com to see what this meant and how I can fix it. I am aware that it is a critical error on the system health for my ACS. But what exactly does that mean? How can I figure out what is the problem before it becomes a big issue. Any help is well appreciated! Thanks!!

    Hi,
    Flashing amber LED does not always point to fault. Please see this bug related to system
    LED flashing amber.
    CSCsh44884 Bug Details : Appliance: No Troubleshooting for System health LED
    Status: NEW
    Symptom: The appliance hardware has a "System health LED" that may go into amber status,
    to indicate a hardware warning, and red to indicate a hardware failure.
    Conditions:
    In most situation the ACS appliance is still operative, when the light is in amber status.
    The appliance should offer better information on what condition caused this alarm, and include this either by new CLI command, or included as additional information in pakage.cab file.
    .Workaround:
    -Reload appliance
    -Verify enviromental conditions (temperature, power)
    Alternate Details:
    Symptom:
    The appliance hardware has a "System health LED" that may go into amber status, to
    indicate a hardware warning, and red to indicate a hardware failure
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&b
    ugId=CSCsh44884
    Let me know if you have any question.
    Regards,
    ~JG
    Do rate helpful posts

Maybe you are looking for