Broadband painfully slow - 0.15Mbps
Hi
We having been paying through the roof now for broadband which has just taken me an hour and a half to download a file of 71mb. We have had to move house which means we have been forced to move with BT and ever since May the Internet has been unbearable. At points there is just no point in using it at all and just use 3G through Vodafone. I have waved goodbye to the days of YouTube and iplayer as we receive speeds of 0.15Mbps. What's worse is I have now lost the will to bother phoning BT as you have to go through a whole ideal with the phone service then speak to numerous people who tell you the same troubleshoot steps.
Please, I AM BEGGING, for some form of help to get this truly awful service to what speeds we were informed we would have when moving house: 2Mbps.
Thanks,
Jack.
Hi Welcome to the forums
Here is a basic guide to getting help from the community members done by CL Keith http://forumhelp.dyndns.info/speed/first_steps.html
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
once you have posted the information asked for then the community members can help you more
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’
Similar Messages
-
Over the last few days my speed has dropped from almost 7mb to below 2 mb.
Today I am getting less than 1mb. Noticed my ip profile is now sitting at 2000.
Dont think I have been capped as I have had no emails to confirm this.
Tried the call centre but they were not much help other than try the usual connections etc.
Hope someone can help.
Test1 comprises of Best Effort Test: -provides background information.
Download Speed 1166 Kbps 0 Kbps 2000 Kbps Max Achievable Speed Download speedachieved during the test was - 1166 Kbps For your connection, the acceptable range of speeds is 400-2000 Kbps.
Additional Information: Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 2000 Kbps
ADSL line status Connection Information Line state Connected Connection time 0 days, 20:57:51 Downstream 8,128 Kbps Upstream 448 Kbps ADSL Settings VPI/VCI 0/38 Type PPPoA Modulation G.992.1 Annex A Latency type Fast Noise margin (Down/Up) 10.1 dB / 29.0 dB Line attenuation (Down/Up) 29.5 dB / 16.0 dB Output power (Down/Up) 12.4 dBm / 1.9 dBm Loss of Framing (Local/Remote) 0 / 0 Loss of Signal (Local/Remote) 0 / 0 Loss of Power (Local/Remote) 0 / 0 FEC Errors (Down/Up) 0 / 0 CRC Errors (Down/Up) 138 / 0 HEC Errors (Down/Up) 150 / 0 Error Seconds (Local/Remote) 138 / 0
Solved!
Go to Solution.Well it is now over the 5 day mark with no change.
Is my ip profile stuck for some reason.
Even said my fault had been fixed in 'mybt' account.
Where do I go now?
Latest tests below.
Test1 comprises of Best Effort Test: -provides background information. Download Speed 1704 Kbps 0 Kbps 2000 Kbps Max Achievable Speed Download speedachieved during the test was - 1704 Kbps For your connection, the acceptable range of speeds is 400-2000 Kbps. Additional Information: Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM) IP Profile for your line is - 2000 Kbps ADSL line status Connection Information Line state Connected
Connection time 5 days, 20:13:59 Downstream 8,128 Kbps Upstream 448 Kbps ADSL Settings VPI/VCI 0/38 Type PPPoA Modulation G.992.1 Annex A Latency type Fast Noise margin (Down/Up) 10.3 dB / 29.0 dB Line attenuation (Down/Up) 29.5 dB / 16.0 dB Output power (Down/Up) 12.4 dBm / 1.9 dBm Loss of Framing (Local/Remote) 0 / 0 Loss of Signal (Local/Remote) 0 / 0 Loss of Power (Local/Remote) 0 / 0 FEC Errors (Down/Up) 0 / 0 CRC Errors (Down/Up) 845 / 14 HEC Errors (Down/Up) 1088 / 0 Error Seconds (Local/Remote) 836 / 14 -
Painfully slow broadband connection
Hello, my boradband connection has been painfully slow these past couple days I have a download speed of 3.16 Mbps and an upload speed of 0.66 Mbps. I feel it should be higher. Sky Hub Stats Router StatisticsSystem Up Time: 20:49:27PortStatusTxPktsRxPktsCollision PktsTx b/sRx b/sUp TimeWANPPPoA55465471722700011:17:32LANUp340065845900020:49:27WLANUp2759170195605701120:49:27Broadband LinkDownstreamUpstreamConnection Speed3821 kbps799 kbpsLine Attenuation52.5 dB33.4 dBNoise Margin6.3 dB12.12 dB
Mine is exactly the same, contacted sky about it via email. The technical dept ran a line tst and was showing good speeds at off peak times. 6-7mbps 5pm to midnight typically when I want to use is is as low at 0.44mbps I cant work with that. so it's getting pulled out as sky cant rectify it
-
ITunes 9.2.1 iPad painfully slow, iPhone 4 fine
Ever since I updated to version 9.2.1 the backup time for my iPad is painfully slow.
I ran a backup on my iPhone4 and it took about 5 minutes for a full backup and sync. So I ran downstairs, grabbed an adult beverage from the fridge, started working on my mac mini. After 60 minutes I went to grab some info off the iPad and it's still backing up an hour later.
System:
iPhone & iPad sync to a Windows 7 PC.
(Trust me if i could migrate without having to wipe my phone and iPad settings they would be on the mac mini)
I've rebooted my PC and iPad several times with no luck.
This has been running perfectly fine with iTunes 9.2.Requirements to install iOS 4.2.1, this is from http://support.apple.com/kb/DL1061
System Requirements
* Mac or PC computer with USB 2.0 port
* iTunes 10.1 or later
Requirements for iTunes 10.1 on a Mac (this is from http://www.apple.com/itunes/download/ )
Macintosh Hardware
* Mac computer with an Intel, PowerPC G5 or G4 processor
* Intel, PowerPC G5 or 1.0GHz PowerPC G4 or faster processor is required to play Standard Definition video from the iTunes Store
* 2.0GHz Intel Core 2 Duo or faster processor is required to play HD video, an iTunes LP, or iTunes Extras from the iTunes Store
* 512MB of RAM; 1GB is required to play HD video, an iTunes LP, or iTunes Extras
* Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
* Playing videos also requires at least 16MB of video RAM
* Broadband Internet connection to use the iTunes Store
* Apple combo drive or SuperDrive to create audio, MP3, or back-up CDs; some non-Apple CD-RW recorders may also work.
* Apple SuperDrive to back up your library to DVDs; some non-Apple DVD-RW drives may also work.
Macintosh Software
* Mac OS X version 10.5 or later
* QuickTime 7.6 or later
* Support for HE-AAC requires QuickTime 7.6.4 or later
* Safari 4.0.3 or later
* 200MB of available disk space -
Mobileme calendar freezing and painfully slow
Both my ipad and iphone4 calendars are painfully slow and freeze up. Switching from month to month now takes about 10-15 seconds while it used to be instantaneous. Anyone know if there is a fix for this.
I have this problem too. My symptoms are that when I open the calendar, the calendar starts, but appears empty. The "network in use" spinning indicator next to the wifi on symbol in the screen header is on. It takes at least 20 seconds and as much as 45 seconds before any calendar entries are displayed. If you try to change the view (e.g., from day to week) or change the date(s) displayed, it also takes a long time to display.
If I had a slow internet connection, I guess I could understand, but I have a 15Mbps down, 5Mbps up FIOS connection which is really fast. I don't think the problem is related to wifi, but I couldn't say for sure.
I don't have this problem on my iPhone 4 (also iOS 4.2.1). It's a tad slower than it used to be, but at least it displays calendar entries within a couple seconds.
When I enter a new appointment, the same thing happens--after I hit done, the entry doesn't appear for many seconds after the appointment entry form has been closed. It's like it has to send it to MobileMe and then download it before it will display it.
On top of all that, the calendar app sometimes crashes, which it never did before.
If this keeps up, I'll have to move to Google calendar, as the very long delays makes the calendar unusable in practice. -
Wi-fi painfully slow on macbook pro in OSX 10.8.2
I have a Mac Book pro and over the last two days my internet has turned painfully slow on wifi - i havent loaded any new programmes and Speedtest shows no problems, still 37mbps on fiber broadband, my iPhone and PC are fine on the same wireless connection and Ethernet is perfect!!
I have tried resetting Safari and Firefox in preferences, clearing history and cookies, resetting DHCP, even using the setting 8.8.8.8. DNS server, and changing wireless channels, resetting the router, as well as running MacScan. I see people talking about turning off IPv6 but im on OS X 10.8.2 and off is not an option I have Automatic, manual and Link-manual only, i have tried all these to no joy still web pages just take ages to load :-( Any ideas?Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Painfully slow connection with new master socket
Hi forum
Hoping for some advice or perspective on possible issue with my broadband connection. Perhaps unrelated, but I recently had a new master socket fitted (NTE5), however the broadband speed in the house is now painfully slow.
Am using BT Home Hub 4, below are the rest results I'm receiving, however I'm curious as to whether 0.25Mbps really is likely to be the maximum achievable speed, as this renders several services almost unusable.
Grateful if anyone feels there is more that could be done.
Thanks,
Kevin
Results....
The only socket connected is for the router/ phone, which is now connected to the test socket (with a microfilter).
Quiet line test: normal
Speed info from the hub manager (normal socket/ test socket)
Download speed (Mbps): 0.17 / 0.24
Upload (Mbps): 0.03 / 0.02
Ping latency (ms): 326.50 / 0.00
ADSL connection (from home hub)
12:02:59, 29 Jun.
(334146.810000) DSL noise margin: 16.50 dB upstream, 10.60 dB downstream
12:02:58, 29 Jun.
(334145.900000) DSL line rate: 440 Kbps upstream, 284 Kbps downstream
Speed test (from BTW performance test)
1. Best Effort Test: -provides background information.
Download Speed
0.17 Mbps
0 Mbps
0.25 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.17 Mbps
For your connection, the acceptable range of speeds is 0.1 Mbps-0.25 Mbps.
IP Profile for your line is - 0.25 Mbps
2. Upstream Test: -provides background information.
Upload Speed
0.03 Mbps
0 Mbps
0.83 Mbps
Max Achievable Speed
Upload speed achieved during the test was - 0.03Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
Please visit the FAQ if you are unable to understand the test results.
From kitz.co.uk max speed calculator
Estimation of your maximum rate adaptive adsl speed
Downstream
Attenuation
0 dB
Approx
Line Length
0 km
From BT Diagnostics site:
Broadband Speed Test
We haven't been able to complete the speed test at this time.
This may be due to a problem with the speed tester, or your line may be running very slowly.Thanks for your quick response, much appreciated. Further results below - suggesting that faster should be possible?
The connection time from 12 was due to a manual reset, the only time it was reset (WAN logs also noted below).
ADSL Checker....
Telephone Number 01562xxxxxx on Exchange WOLVERLEY is served by Cabinet 3
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
WBC ADSL 2+
Up to 13.5
11.5 to 15
Available
WBC ADSL 2+ Annex M
Up to 13.5
Up to 1.5
11.5 to 15
Available
ADSL Max
Up to 8
7 to 8
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
Copper Multicast
Available
12:02:59, 29 Jun.
(334146.810000) DSL noise margin: 16.50 dB upstream, 10.60 dB downstream
12:02:58, 29 Jun.
(334145.900000) DSL line rate: 440 Kbps upstream, 284 Kbps downstream
12:01:36, 29 Jun.
(334063.890000) DSL is down after 2226 minutes uptime
12:01:36, 29 Jun.
(334063.890000) ETHoA is down after 2226 minutes uptime
12:01:36, 29 Jun.
(334063.550000) PPPoA is down after 2226 minutes uptime [Waiting for Underlying Connection (WAN DSL - Up)]
12:01:33, 29 Jun.
(334060.470000) PPP LCP Send Termination Request [User request] -
Mid 2011 Macbook Air Painfully slow.
Mid 2011 Macbook Air Painfully slow.
Hey everyone. I am writing about my 13 inch Mid 2011 Macbook Air.
Recently it has been extremely slow and on occasion has not started up.
I have reset the PRAM and SMC already, yet it is still very slow. I have a couple theories about what might have caused it, are they plausible?
Theory 1: It’s a software problem. I tried to upgrade to 10.8.2 but halfway through the upgrade the computer restarted and somehow I was still on 10.8.1. For fear of a big issue happening I didn’t try to upgrade again. Perhaps it is a flaw in Apple’s software update?
The important thing to note about this update is that I tried to install 10.8.2 around a month or two weeks BEFORE I started having problems. So if these issues were due to 10.8.2’s failed update then it certainly was a delayed reaction.
I would of course like to update to 10.8.2 BUT as my computer is acting EXTREMELY slow and having trouble turning on occasionally I am worried the software update will completely brick the machine. Is that possible? Should I actually finish through with the software update?
Theory 2: It was an electricity problem.
The computer died when I was sitting at a café plugged into their wall sockets. A few days later when I came back to the same spot with my old macbook which is now being used in lieu of the Air it suddenly turned black for a little while. Sensing it might be an electricity surge or something with their system I unplugged the cable. I am not sure if that was paranoia though.
Can an electricity surge or a bad outlet fry a computer? Can it fry the ram so the computer is extremely slow? Does that theory hold any water?
Thanks for your help diagnosing this problem.
All the best.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
Open and Save dialogs are painfully slow. Is there a solution?
Open and Save dialogs are painfully slow. Is there a solution?
I pulled this part out of one of the topics Barney-15E linked to. It absolutely works! The glacially slow Finder response has been driving me batty in Mavericks. Each time I restarted, it would take forever to list the startup drive when I opened it. Open and Save dialogues were also painfully slow to respond. Now they all snap open and list instantly. I used TextWrangler to comment out the line in the file auto_master, then ran the automount command in Terminal.
Working workaround:
Use the following statements in Terminal.
sudo vi /etc/auto_master
In this file comment out /net with # (#/net .....)
sudo automount -vc
Fixed.
Confirmed here too both for Preview.app Open file sluggishness and Finder window population. Thanks Snaggletooh_DE!
Couple of notes:
(1) Some folks may be more comfortable using a GUI editor like TextWrangler instead of vi
a) in the Finder use the GO menu and select Go to Folder
b) type '/etc' ( without single quotes ) in the Go to folder dialog box and press the Go button
c) Right ( Control ) click the auto_master file in the resulting Finder window. Select "Open with...." and use TextWrangler ( your choice )
d) Comment out the line by inserting a '#' ( pound sign ) as noted in Snaggletooth_DE's instructions
e) Save the file ( probably need to authenticate with your admin password )
f) Do the 'sudo automount -vc' per Snaggletooth_DE's instructions. Will need to authenticate again.
(2) Notice Snaggletooth_DE described this as a "workaround" because it bypasses an Apple bug. Presumably most people have not changed their auto_master file and it worked fine in Mountain Lion and prior. In other words: If you haven't done so already, please continue to submit feedback and bug reports to Apple for this issue.
Kudos to Snaggletooth_DE for figuring out code is trying to look at network ( NFS ) volumes that maybe don't exist. -
Here is the etrecheck info. Please advise... thank you!
Problem description:
iPhoto is running painfully slow. My library is on an external hard drive. It was runing just fine yesterday. i disabled Dropbox and a few other applications, to no avail.
EtreCheck version: 2.1.5 (108)
Report generated January 7, 2015 at 12:40:17 PM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:55:4
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (54.79 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Seagate Backup+ Desk 4 TB
disk2s1 (disk2s1) <not mounted> : 262 KB
Seagate Backup Plus Drive (disk2s3) /Volumes/Seagate Backup Plus Drive : 4.00 TB (2.73 TB free)
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.logmein.driver.LogMeInSoundDriver (4.1.46f67) [Support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) [Support]
Startup Items: ℹ️
ProTec6b: Path: /Library/StartupItems/ProTec6b
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[loaded] com.citrix.AuthManager_Mac.plist [Support]
[running] com.citrix.ReceiverHelper.plist [Support]
[running] com.citrix.ServiceRecords.plist [Support]
[invalid?] com.logmein.LMILaunchAgentFixer.plist [Support]
[not loaded] com.logmein.logmeingui.plist [Support]
[not loaded] com.logmein.logmeinguiagent.plist [Support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[not loaded] com.gopro.stereomodestatus.plist [Support]
[not loaded] com.logmein.logmeinserver.plist [Support]
[invalid?] com.logmein.raupdate.plist [Support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.sharpcast.xfsmond.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Dropbox Application (/Applications/Dropbox.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
ThisLife Uploader ApplicationHidden (/Applications/ThisLife Uploader.app)
WDQuickView Application (/Library/Application Support/WDSmartWare/WDQuickView.app)
Internet Plug-ins: ℹ️
LogMeInSafari64: Version: 1.0.586 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
LogMeIn: Version: 1.0.586 [Support]
Silverlight: Version: 4.0.60831.0 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
LogMeInSafari32: Version: 1.0.586 [Support]
CitrixICAClientPlugIn: Version: 11.8.0 - SDK 10.7 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 [Support]
Safari Extensions: ℹ️
Evernote Web Clipper [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
GoPro [Support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 264.06 GB
Destinations:
Seagate Backup Plus Drive [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 264.06 GB X 3)
Top Processes by CPU: ℹ️
8% WindowServer
2% Safari
1% mds
1% loginwindow
0% AppleSpell
Top Processes by Memory: ℹ️
2.13 GB iPhoto
610 MB Image Capture Extension
155 MB mds_stores
129 MB Safari
129 MB Finder
Virtual Memory Information: ℹ️
48 MB Free RAM
3.71 GB Active RAM
3.68 GB Inactive RAM
1.04 GB Wired RAM
6.89 GB Page-ins
293 MB Page-outs
Diagnostics Information: ℹ️
Jan 7, 2015, 12:28:48 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-122848_[redacted].cpu_resourc e.diag [Details]
Jan 7, 2015, 12:13:08 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-121308_[redacted].hang
Jan 7, 2015, 12:07:39 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-120739_[redacted].cpu_resourc e.diag [Details]
Jan 7, 2015, 12:02:48 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-120248_[redacted].hang
Jan 7, 2015, 11:51:45 AM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-115145_[redacted].cpu_resourc e.diag [Details]
Jan 7, 2015, 11:45:54 AM Self test - passed
Jan 6, 2015, 05:01:58 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-06-170158_[reda cted].crash
Jan 5, 2015, 02:12:40 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-05-141240_[redacted].cpu_resourc e.diag [Details]
Jan 5, 2015, 10:04:15 AM /Library/Logs/DiagnosticReports/com.apple.MediaLibraryService_2015-01-05-100415 _[redacted].cpu_resource.diag [Details]
Jan 4, 2015, 05:28:20 PM /Users/[redacted]/Library/Logs/DiagnosticReports/HandBrake_2015-01-04-172820_[r edacted].crash
Jan 4, 2015, 05:28:04 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-04-172804_[reda cted].crash
Jan 4, 2015, 03:09:50 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-01-04-150950_[reda cted].crash
Jan 4, 2015, 03:09:15 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-04-150915_[reda cted].crashStart time: 15:08:00 01/08/15
Model Identifier: MacBookPro6,2
System Version: OS X 10.10 (14A389)
Kernel Version: Darwin 14.0.0
Time since boot: 1 day3:22
Memory
BANK 0/DIMM0:
Size: 4 GB
Speed: 1067 MHz
Status: OK
Manufacturer: 0x859B
BANK 1/DIMM0:
Size: 4 GB
Speed: 1067 MHz
Status: OK
Manufacturer: 0x859B
SerialATA
Hitachi HTS545032B9SA02
USB
Backup+ Desk (Seagate LLC)
USB Receiver (Logitech Inc.)
FileVault: On
Diagnostic reports
2014-12-17 Safari crash
2014-12-17 com.apple.appkit.xpc.openAndSavePanelService crash
2014-12-17 garcon crash x4
2014-12-27 Finder crash
2014-12-27 ThisLife Uploader crash
2014-12-27 garcon crash x2
2014-12-28 Finder crash
2014-12-28 garcon crash x3
2014-12-31 com.apple.appkit.xpc.openAndSavePanelService crash
2014-12-31 garcon crash
2015-01-02 Finder crash
2015-01-02 garcon crash
2015-01-05 Finder crash
2015-01-05 HandBrake crash
2015-01-05 garcon crash x2
2015-01-07 garcon crash
2015-01-08 iPhoto hang x2
Log
Jan 7 11:47:39 com.apple.xpc.launchd.domain.user.55: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
Jan 7 11:47:43 com.apple.xpc.launchd.domain.user.202: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
Jan 7 11:47:43 com.apple.xpc.launchd.domain.user.202: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
Jan 7 11:47:58 com.apple.xpc.launchd.domain.user.89: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
Jan 7 11:47:58 com.apple.xpc.launchd.domain.user.89: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
Jan 7 11:48:38 jnl: disk2s3: replay_journal: from: 50180096 to: 50778112 (joffset 0x3a3c000)
Jan 7 11:48:39 jnl: disk2s3: journal replay done.
Jan 7 11:49:37 com.logmein.LMILaunchAgentFixer: Service setup event to handle failure and will not launch until it fires.
Jan 7 11:49:39 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.319: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Jan 7 11:49:39 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.319: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Jan 7 11:49:39 com.citrix.ServiceRecords: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.citrix.Beacons
Jan 7 11:51:29 process iPhoto[248] thread 2450 caught burning CPU! It used more than 50% CPU (Actual recent usage: 52%) over 180 seconds. thread lifetime cpu usage 90.109268 seconds, (87.476202 user, 2.633066 system) ledger info: balance: 90008641218 credit: 90014455352 debit: 5814134 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 172082865204
Jan 7 11:52:49 com.apple.xpc.launchd.domain.user.99: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
Jan 7 11:52:49 com.apple.xpc.launchd.domain.user.99: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
Jan 7 12:07:36 process iPhoto[490] thread 12067 caught burning CPU! It used more than 50% CPU (Actual recent usage: 93%) over 180 seconds. thread lifetime cpu usage 90.200179 seconds, (88.682346 user, 1.517833 system) ledger info: balance: 90012025000 credit: 90016246356 debit: 4221356 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 96436947650
Jan 7 12:19:32 com.apple.xpc.launchd.domain.pid.quicklookd.536: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. app
Jan 7 12:21:38 process WindowServer[134] caught causing excessive wakeups. Observed wakeups rate (per sec): 174; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 130324
Jan 7 12:24:23 process Image Capture Ex[494] caught causing excessive wakeups. Observed wakeups rate (per sec): 1570; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45166
Jan 7 12:28:45 process iPhoto[643] thread 21591 caught burning CPU! It used more than 50% CPU (Actual recent usage: 90%) over 180 seconds. thread lifetime cpu usage 90.114637 seconds, (88.373536 user, 1.741101 system) ledger info: balance: 90002127665 credit: 90005648813 debit: 3521148 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 99086317519
Jan 7 12:30:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.655: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Jan 7 12:30:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.655: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Jan 7 13:13:15 process com.apple.WebKit[827] caught causing excessive wakeups. Observed wakeups rate (per sec): 560; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 55866
Jan 7 20:09:33 process iPhoto[643] caught causing excessive wakeups. Observed wakeups rate (per sec): 198; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 269536
Jan 8 01:12:04 AppleUSBMultitouchDriver::validateChecksum - 512-byte packet checksum is incorrect (expected 0xf60c, checksum bytes were 0xdead)
Jan 8 15:06:18 com.apple.xpc.launchd.domain.pid.quicklookd.1302: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. app
Memory: iPhoto (UID 501) is using 2093 MB
kexts
com.logmein.driver.LogMeInSoundDriver (4.1.46f67)
Daemons
com.adobe.fpsaud
com.apple.installer.osmessagetracing
com.logmein.raupdate
com.macpaw.CleanMyMac2.Agent
com.sharpcast.xfsmond
Agents
com.adobe.ARM.UUID
com.apple.AirPortBaseStationAgent
com.apple.photostream-agent
com.citrix.AuthManager_Mac
com.citrix.ReceiverHelper
com.citrix.ServiceRecords
com.google.keystone.user.agent
com.logmein.LMILaunchAgentFixer
Startup items
/Library/StartupItems/ProTec6b/DemoOver
/Library/StartupItems/ProTec6b/Nalpeirond6b
/Library/StartupItems/ProTec6b/ProTec6b
/Library/StartupItems/ProTec6b/StartupParameters.plist
dylibs
/Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/WebKit.dylib
/Users/USER/Library/Application Support/Google/Chrome/WidevineCDM/1.4.6.703/_platform_specific/mac_x64/libwidev inecdm.dylib
/usr/lib/HDREfexProFC.dylib
App extensions
com.getdropbox.dropbox.garcon
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist
- mod date: Jun 7 11:58:25 2013
- checksum: 1591517921
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.AuthManager_Mac</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.AuthManager_Mac</string>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist
- mod date: Jun 7 11:58:25 2013
- checksum: 676087606
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.citrix.ReceiverHelper</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist
- mod date: Jun 7 11:58:25 2013
- checksum: 1445213025
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.Beacons</key>
<true/>
<key>com.citrix.ServiceRecords</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.ServiceRecords</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
</array>
...and 8 more line(s)
Contents of /Library/LaunchAgents/com.logmein.LMILaunchAgentFixer.plist
- mod date: Nov 10 20:47:41 2014
- checksum: 94065829
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Label</key>
<string>com.logmein.LMILaunchAgentFixer</string>
<key>OnDemand</key>
<true/>
<key>ThrottleInterval</key>
<integer>1</integer>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LMILaunchAgentFixer.app/Contents/MacOS/LMILaunchAgentFixer< /string>
<string>fromlaunchagent</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.logmein.logmeingui.plist
- mod date: Jan 7 12:05:30 2015
- checksum: 849719711
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeingui</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeInGUI.app/Contents/MacOS/LogMeInGUI</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.logmein.logmeinguiagent.plist
- mod date: Jan 7 12:05:30 2015
- checksum: 1227007658
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeinguiagent</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Helpers/LMIGUIAgent.app/Contents/MacOS /LMIGUIAgent</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>Sockets</key>
<dict>
<key>Listeners</key>
...and 19 more line(s)
Contents of /Library/LaunchAgents/com.logmein.logmeinguiagentatlogin.plist
- mod date: Jan 7 12:05:30 2015
- checksum: 3390435066
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeinguiagentatlogin</string>
<key>LimitLoadToSessionType</key>
<array>
<string>LoginWindow</string>
</array>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Helpers/LMIGUIAgent.app/Contents/MacOS /LMIGUIAgent</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>Sockets</key>
<dict>
<key>Listeners</key>
...and 19 more line(s)
Contents of /Library/LaunchDaemons/com.gopro.stereomodestatus.plist
- mod date: Jan 29 17:22:17 2014
- checksum: 2319101607
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.gopro.stereomodestatus</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>RunAtLoad</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Applications/GoPro/Tools/StereoModeStatus.app/Contents/MacOS/StereoMod eStatus</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.logmein.logmeinserver.plist
- mod date: Jan 7 12:05:30 2015
- checksum: 1427099528
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.logmein.logmeinserver</string>
<key>LegacyTimers</key>
<true/>
<key>OnDemand</key>
<false/>
<key>ProcessType</key>
<string>Interactive</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/MacOS/LogMeIn</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/Library/Logs/LogMeIn/stderr.log</string>
<key>StandardOutPath</key>
...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.logmein.raupdate.plist
- mod date: Nov 10 20:46:56 2014
- checksum: 3493110929
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.logmein.raupdate</string>
<key>OnDemand</key>
<true/>
<key>RunAtLoad</key>
<false/>
<key>KeepAlive</key>
<false/>
<key>LaunchOnlyOnce</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/LogMeIn/update/raupdate</string>
<string>/s</string>
</array>
<key>StandardErrorPath</key>
<string>/Library/Logs/LogMeIn/stderr.log</string>
<key>StandardOutPath</key>
<string>/Library/Logs/LogMeIn/stdout.log</string>
<key>WorkingDirectory</key>
<string>/Library/Application Support/LogMeIn/bin/</string>
...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist
- mod date: Sep 1 15:15:35 2014
- checksum: 2214847194
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.macpaw.CleanMyMac2.Agent</string>
<key>MachServices</key>
<dict>
<key>com.macpaw.CleanMyMac2.Agent</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
...and 8 more line(s)
Contents of /Library/LaunchDaemons/com.sharpcast.xfsmond.plist
- mod date: May 4 20:28:27 2013
- checksum: 3377386094
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//ENhttp://www.apple.com/DTDs/PropertyList-1.0.dtd">
<!-- SugarSync version 1.9.96.111090.20130403 -->
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.sharpcast.xfsmond</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/SugarSync/scxfsmond</string>
<string>-log</string>
<string>error</string>
<string>-launchd</string>
</array>
<key>Sockets</key>
<dict>
<key>Listeners</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
...and 14 more line(s)
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Jul 24 11:11:09 2013
- checksum: 394026997
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
<string>semi-auto</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.google.keystone.agent.plist
- mod date: Nov 30 14:26:35 2014
- checksum: 4084537214
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Listeners
cupsd: ipp
User login items
Garmin Express Service
- /Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app
Dropbox
- /Applications/Dropbox.app
Google Chrome
- /Applications/Google Chrome.app
ThisLife Uploader
- /Applications/ThisLife Uploader.app
WDQuickView
- /Library/Application Support/WDSmartWare/WDQuickView.app
Safari extensions
Evernote Web Clipper
- com.evernote.safari.clipper
Widgets
iCal
Earth
Restricted files: 339
Lockfiles: 101
Elapsed time (s): 844
Wow, that's a lot of data for you to sift through, but I suppose you know what you are looking to find. I bet you earned every one of those points. Thanks, Linc. All the folks in the world waiting for me to share their photos with them thank you as well : ) Cathleen -
Painfully slow wireless connection with Time Capsule
I have recently bought and changed over my home wireless to a Time Capsule 2TB, which I wanted for both the backup and the ease in home networking. I have set up the wireless network and since day one it has been painfully slow! I have created two wireless networks, one for 2.4GHz and the other for 5GHz. I have been reading all over the web and boards but to no avail. Any suggestions? I am about to give up on the time capsule completely! I couldn't even download my podcast tonight.
Help!Firstly plug in directly by ethernet to be sure there isn't a network issue on wan side.
Are you testing on multiple computers .. Mac and/or PC?? Which ones. and what network cards are being used?
Try and remove anything that uses G wireless and throw away any B wireless. It will not work together with N even if it is an option.
Turn off the guest network if you have it on.
Have you used a wireless analyser like kismac or inssider for pc? Find the free channels and set the wireless to that. Use no security at first to test.. briefly.. and then select wpa2 personal. Is there any difference?
Do you have another wireless router running?? Were you using a different wireless router for comparison? -
Time capsule painfully slow under windows 7
I'm using a time capsule (latest gen, 3TB) with both a Mac and a PC. The Mac uses Time Machine to backup and things work great.
However, on my PC (Windows 7), the TC is mounted as a network mounted (drive Z), and if I simply try to drag and drop files from my PC to the TC, it's painfully slow. At least 10x slower than on the Mac.
As an example, copying 500MB takes about 10 hours...
Any suggestions on improving performance using TC on a Windows 7 machine?
Thanks.Download the free iStumbler app to examine the strength of your connection.
If it's not good, look for interference with another wireless device, cordless phone, microwave oven, etc. Turn them off temporarily; if you find an offender, move it farther away. See AirPort and Bluetooth: Potential sources of wireless interference for more.
Try different WIFI channels. -
Time capsule painfully slow wifi
New time capsule , painfully slow wifi , cisco works lightning fast so the issue is with the TC. Looked at forums and I see it's a common isssue. Any ideas that actually work?
Download the free iStumbler app to examine the strength of your connection.
If it's not good, look for interference with another wireless device, cordless phone, microwave oven, etc. Turn them off temporarily; if you find an offender, move it farther away. See AirPort and Bluetooth: Potential sources of wireless interference for more.
Try different WIFI channels. -
Time Machine backup painfully slow all of a sudden
For some reason my time machine backups have become painfully slow for some reason. They were fine earlier today, then IIRC I booted windows, then booted back into OSX to run a backup. Despite there being only 1 or two changes (files added to the system) time machine began "preparing backup" by going through all the files on my HDD! Now, it is backing up, but at the rate of about 5 Kb/s!
Something is wrong. I've tried deleting the progress file in the backup folder and "resetting" TM by deselecting the backup drive and selecting it again. Nothing worked. Why would TM be so slow all of a sudden?
Has anyone any ideas?iBookguy wrote:
No pre-backup thinning needed: 18.98 GB requested (including padding), 205.25 GB available
Copied 105384 files (7.2 MB) from volume Mac OSX.
That is a bit suspicious, but not necessarily wrong. Something caused it to think about 16 GB had been changed (it adds 20% for the "padding" in the message).
How are you running Windoze? Is it on a separate partition? If you're running it via virtualization software, with the vm file on an OSX disk but excluded from TM, that's a possible explanation.
105384 files in only 7.2mb? I doubt it...something seems fishy
Those counts are nearly always very high, and sometimes crazy high. There's some indication it's counting all the metadata, extended attributes, etc., as separate files.
If in doubt, boot up from your Install disc and do a +*Repair Disk+* on your boot volume. Then reboot normally and run another backup. That should trigger a "deep traversal," where TM will compare everything on your system with it's backups, to be sure it's got everything it should. -
Upgraded from 10.6.8 to Mavericks last week on my MacBook Pro running the 2.4 GHz i5 and it's painfully slow on start-up- I mean, 5 minutes or more, to be fully functional... Is this normal?
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
Maybe you are looking for
-
How to change my email address registered to my toshiba laptop administrator account
I bought the satelite laptop with windows 8 around christmas of 2013. I registeresd it with an email that has since become flooded with junk mail. I would like to change my email. I have a new email. I know I can add another administrator account but
-
Error in New Features Guide 12c Release 1 (12.1)
Page 1-6 in the section: 1.1.2.2 Replacement of CSSCAN and CSALTER with DMU At the bottom of the section is a URL purportedly to the OTM DMU page... except that it isn't. The first link is what's in the book.. and doesn't work. The second link is wh
-
ill connect my itouch to my computer via usb port and it will begin to charge but it will not show up in "my computer" please help
-
Combine 2 different list columns and showning in 1 column
Hi, Is it possible to combine columns of 2 different lists and show in one column? I have a custom list called "Levels" which contain data like "Developer", "Tester". The levels have some training associated. Training is another column. I have anothe
-
Dear Experts I need a report for Materials for Finished & Semi Finished where price indicator is V. Please note I do not have the authorization for SE16. Kindly advise . Many thanks in advance. Regards Ayaz