Broadband phone no longer working after Infinity i...

I use my broadband phone supplied with the hub as an extra phone, mainly to recieve calls downstairs as the main phone is upstairs, but it is no longer working after BT Infinity was installed, upgrading from BT broadband.
Any solutions?
Thanks

If its the phone you used with the old none infinity hub this may be of interest
http://community.bt.com/t5/BB-in-Home/BT-Infinity-and-No-Hub-Phone/m-p/39358
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

Similar Messages

  • Phone no longer working after upgrade - i5 - any help?

    i'm stuck in loop - logging in just takes me back to log in page.......

    Go to settings if you can and reset after reset you will have to enter your Router wireless key Then wait for set up. If you cannot do this you need to connect to iTunes on your PC Bsydd uk

  • Headphones no longer work after ios8 update to Iphone 5

    My plug in head phones no longer work after updating to IOS8.  I thought it was the head phones and bought new ones - they don't work either.  I updated my iPad and both head phones work.  Phone is IPhone 5 - not due for an upgrade until December.  Any suggestions?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

  • I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate.  Now I have no phone and I am becoming frustrating.

    I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate.  Now I have no phone and I am becoming frustrating.
    It downloaded all my contacts, photo's with no problem.  I called the number they gave me from my old phone and then turned it off.  I then put the sim card in and charged the phone.  I followed all the setup steps and no I cannot send any text or make any phone calls.  I get a message that they cannot authenticate my phone to dial #8899 but get the same message.

        Hello Notahappycamper1962
    Let's get that S5 up and running! I want you to love the S5! Is the old device powered off? What zip code are you in?
    I look forward to hearing from you and getting this addressed.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

    home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device.  phone no good without a home button

    The button's broken.  S**t happens.  Apple will replace your phone.  If in waranty it will be free of charge.  If not, you will pay $149. 
    You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

  • Camera no longer works after 6.0.1

    My camera no longer works after an update to 6.0.1 on iPhone 5. It now will make the noise and animation, but the camera app freezes and won't take the picture. Any luck for anyone else?
    EDIT: Scratch that, turning my phone off and then back on seems to have fixed the issue.
    Message was edited by: Pichu0102DM

    The same powers-that-be fixed the problem for me. It's even more mysterious, since I know I did not restart the computer. I was just surfing along, laboriously using the browser's navigation buttons, when out of habit I pressed the button on the mouse and it worked. It's been working ever since.
    Since I notice that 23 other people have this problem (so far), there's clearly something that needs looking at even if the problem somehow corrects itself.

  • My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade

    My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade. But phone call is still working. Tried resetting phone and repairing device. Still not working. Any suggestion?

    You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

  • Changed phone number, phone no longer working.

    I have an LG Lucid 4G phone that is no longer working after changing the phone number.  The area code for the new number is the same as the old.  This was done online and the instructions stated that all I needed to do was a power cycle and the phone would update automatically.   I did this but the phone did not update.  The number shown online for the phone is the new number so it looks like the change has taken place just not on the phone.  I also tried a reset and then pulling the battery and sim card but the phone still will not update.  Going to "about phone"  and viewing the phone number the old number is still there.
    Is it possible I need a new sim card or is there something else that could be the problem?

    After changing the number online (from my home PC).  I did a power cycle on the phone but it did not update.  I then logged off of myverizon then back on and the new number was reflected on my account.  This was done from my home PC.  I tried another power cycel on the phone but would not  update.  At this point I tried a reset with no luck.  Finally, I tried pulling the battery and sim card, powering on and still would not update.

  • IPad app no long works after upgrading to iOS 7.1.1

    iPad app no long works after upgrading to iOS 7.1.1

    Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

  • IPhoto no longer work after upgrading to Mavericks.

    My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?

    kmg55 wrote:
    Just upgraded and Iphoto will not work,
    Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
    If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps.

  • Many Apps are no longer working after webOS 1.4 update! - please help!

    Hi,
    Many of my previously working Palm Pre Apps are no longer working after the webOS 1.4 update.
    Here are the ones that just return a blank/white screen after launching so far:
    SplashID
    Daily Devo
    Daily Light (Love)
    Absolute Fitness (some options no longer work correctly & are returning a white screen and some options are working)
    These are just a few of the Apps that I am having problems with and there are probably many others.  I have also sent emails/posted to forums on the developer sites to advise. Hopefully I will hear something back soon.
    Anyone else experiencing this issue as well with any Apps?
    Thanks in advance for any help that you can provide.

    SplashID on my Sprint Pre is showing just a blank screen after starting it and entering my password.  I see no update for it in the App Catalog.
    EDIT: Never mind.  It appears that it only did that on the first launch.  I closed it and restarted it, and now the screen in SplashID is correct.

  • Canon iP2700 is no longer working after update

    My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2  from  https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
    tail -n 100 -f /var/log/cups/error_log
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
    I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
    D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
    D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
    D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
    D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
    D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
    The CUPS ownership of the USB device file seems OK:
    ls -l /dev/bus/usb/001/006
    crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
    I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
    EDIT
    I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
    Last edited by otx (2012-03-09 14:21:27)

    See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

  • My Android Galaxy S5 has locked up and gone into endless loading while trying to update to the Kitkat update. I have set it back to factory settings and tried again and it has locked up again. My phone no longer works. What else can I do?

    My Android Galaxy S5 has locked up and gone into endless loading while trying to update to the Kitkat update. I have set it back to factory settings and tried again and it has locked up again. My phone no longer works. What else can I do?

        Oh goodness,SLEEPER888. We wish you didn't have this problem while trying to complete this update.You have done quite a bit of troubleshooting on your own. If the phone update does not take, we would need to replace it with the warranty. Is it still locked up?
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • Internet Explorer 9 no longer works after an uninstall of HP Support Centre

    Internet Explorer 9 no longer works after an uninstall of HP Support Centre and drivers for 3 HP All-in-One printers (psc1310, C4180, F4200).  Intend to re-install for just C4180.  I selected option to remove for all related software, though the HP Update and Photosmart Essentials have been left.  IE9 stops working when launched (even when launched with no add-ons and with Protected Mode disabled and Advanced Settings restored) and regardless of initial URL.  If I remove the IE9 update then IE8 works fine.   I tried re-installing IE9 update, twice, and it continues to fail.
    I’m running Vista 32 Home Premium SP2 on Samsung Q210 with Norton 360 v5, SpywareBlaster and Spybot - Search & Destroy.
    This question was solved.
    View Solution.

    I now believe the problem with IE9 was not related to HP, but to a Windows Update replacement to the “Intel Corporation - Display - Mobile Intel(R) 4 Series Express Chipset Family” drivers:  Intel Corporation Display software update released in February, 2011 (useless link  http://winqual.microsoft.com/support/?driverid=20411791).   IE9 started working OK when I set “Use software rendering instead of GPU rendering*” (see http://forums.whirlpool.net.au/archive/1678709 with reference to “faulting module igdumdx32.dll”), so will now investigate removing that update.
    Sorry to have cast aspersions on HP.  MS did this to themselves, as usual.

  • Mac Yosemite 10.10.2 -- System Pref. Java pane/ctrl-panel, Update-tab-function no-longer works, after updting to Java 8v40

    Under the Mac Yosemite 10.10.2 O.S. -- the System Preferences: Java pane/ctrl-panel: Update-tab-function no-longer works, after updting to Java 8v40 JRE & SDK -- says that the internet connection is not valid !

    A few questions....I assume your network is connected to the Internet? Do you use a proxy? If so, is it set in the browser or in the Java Control Panel?
    -Roger

Maybe you are looking for