Broadband router

Hi,
I'm moving to a new property, and have ordered broadband which will be activated in 2 weeks. The router is due to arrive on the same day as the broadband will be activated.
If I'm not around on the day to sign for the router, will I be able to use my old router for a few days?
The new router I'm getting is BT HomeHub 3 and the old router I have is O2 Wireless Box 2. I think that BT said my new speed would be about 15Mb.
Thanks!
Jon

qualcuno wrote:eks. The router is due to arrive on the same day as the broadband will be activated.
If I'm not around on the day to sign for the router, will I be able to use my old router for a few days?
Thanks!
Jon
The old router may be locked to O2 only. The best thing would be to reset it to factory default, then see if you can change the broadband login details to [email protected] and a password of BT.
If it will not allow you to do this, then it will not work with BT Broadband.
If it does, you may find that it works better than the HH3.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

How to set up the airport express with a linksys wireless-g broadband router

I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

If that is all that is done, the Express would not provide more wireless coverage. Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area. As per my above comment, one Express connects via Ethernet to the Linksys. The second Express provides the extension.
You must have misunderstood what I was saying.
Linksys is providing a wireless network.
The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
The Express is located on the other side of the house, for example.
The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
The Express is configured in Bridge Mode
This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
Although this is an "extended" network, it is technically known as a "roaming" network.
This is what I was suggesting as a possible alternative without having to buy more hardware.

Wireless B Broadband Router (BEFW11S4) connects for only about 5 mins at a time

I have Wireless B Broadband Router (BEFW11S4). Worked fine for about 2 years. I've had a HP Pavilion for about a year now using the wireless and also have a desktop I use on it (wired). About a month ago the speed seemed to be lagging a little and the router was never secured with a password, so I changed that and added a password. Ever since then the laptop will not stay connected for more than about 5 mins. I have gone back and removed the password protect feature, but still have the problem. It has a problem connecting to the router. The signal bars always seem to be full, but still can't connect. I've tryed reseting the router, unpluging everything, etc and can't get it to have a steady connection like before. Sometimes I can connect to the internet even when it says "Not connected" in the wireless network connection 2 screen. I've tried to search and find a similar problem, but was surprised to not be able to find one. Any insight will help.
Thanks,
Lman

Thanks for the suggestions Wizzard. Although I did not know what all that stuff does, it didn't seem to help. I didn't not upgrade the firmware because there didn't seem to be any upgrades since 2003, before I bought it. Any other suggestions from anybody? Could anybody make an educated guess to whether it's the router or the laptop?
Thanks,
Lman

I have been using WRT54G wireless broadband router and WU...

I have been using WRT54G wireless broadband router and WUSB54G on my home PC for the last 2 years. It was working fine until recently I encountered serious connection problem.
The WUSB54G cannot connect with WRT54G.
Error message " Cannot assocaite with the access point.
I have checked the followings to try and solve the problem.
1) Refresh site survey the WUSB54G does not show my SSID, but it can show my neighbour'sSSID.
3) When I use my notebook with built-in wireless network adaptor to access wirelss broadband there is no problem at all. I can access my SSID.
4) I have try reseting the WRT54G and changing password but still can not solve the problem.
5) Uninstall and re-install
5) I have installed a new USB adapter (WUSB54GG) thinking that it could be the old WUSB54G is faulty. But still encounter same problem.
I am using Window XP Professional. What could be the problem?
Please provide your professional advice. Thank you.

Hi, Try to update firmware of router. You can get latest version from www.linksys.com/download, Hope it will help you

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

Connecting Nintendo Wii - 802.11n AEBS - Broadband Router aint worken?

Hey guys, Ive just bought a new Nintendo Wii which is working a charm, but i cant seam to be able to get it to connect to my wireless network, (my new iPod Touch is also having the same problems (works fine on all networks other than home).
Essentially I've got my broadband modem plugged into a router upstairs and my AirPort Extreme (802.11n) plugged into the aforementioned router upstairs (for some reason AirPort Extreme wouldn't recognize plugging the broadband router straight in rather than through another router) so my setup is:
Broadband Modem -> Wired Router -> AirPort Wireless -> Wii
I think the fact that i have my internet connection coming from another router (whose settings i cant change cause I've forgotten the routers password) and then plugged into my AirPort is whats causing all my troubles??? So ideally if anyones got any suggestions why my AirPort wont accept direct connection from my broadband router i think that might do the trick but making my current setup work for the Wii would be cool.
This is really causing me allot of troubles with heaps of devices so any help is welcome!
Thanks in advance!

Hello kungfuelmosan. Welcome to the Apple Discussions!
I suggest that you try connecting the 802.11n AirPort Extreme Base Station (AEBSn) directly to the broadband modem again, but this time make sure to allow enough time for a complete power recycle of the network components when doing so as follows ...
Try the following, in order, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, AEBSn, & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AEBSn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

BEFW11S4 - Wireless-B Broadband Router questions

I have the BEFW11S4 - Wireless-B Broadband Router. Did it come with mac software originally? If so, is it possible to get the mac software from your company? Secondly, is there a way to disable the wireless signal on it and use it as a wired router? How would I do this? Would I do it in the network system preferences on my mac or would I need the software that came with the router originally?

Hi…
Linksys software CD does not operate on MAC OS. But you can still use the router with MAC. To configure the router with MAC OS connect the MAC to any of the Ethernet port of the linksys router. Login into the router by typing http://192.168.1.1 ( Default IP ) in the address bar of the IE. Leave the Username field blank and type admin as password (If you have not changed the router password.) Using the user interface you can also disable the wireless function of the router.

BEFW11S4 Wireless-B Broadband Router Issues

I have been having issues with my router lately. It is a Linksys BEFW11S4 - Wireless-B Broadband Router. It has the latest firmware and everything which was from like, April of 2005 since this is an older router model. I've had it for about 3 years now and have had no problems until this past week. I have Verizon DSL. Anyway, my network connection seems to fail every so often at least 6 times a day at random times. I use WEP security encryption and everything. Every time it fails, I have to reset the router and go into administrator configurations and retype the password then it starts working again. But it is annoying since I just lose connection for no reason when I'm in the middle of something. Even when it fails, it does not indicate that I lost connection or that my connection is weak. It says that the signal is still excellent all the time even when it stopped working and the Internet light is still on. Odd. Does anyone have any idea what is wrong or is it time for me to buy a Wireless-G router instead and hope that fixes the problem? Again, I have had no issues with the router and it has been working great for nearly 3 years until this past week and I did nothing to mess with it. Maybe is it just that the hardware is worn-out? I dunno, I just want this problem solved.

YouCanfindUs wrote:
Bad DMZ + Portscan = Reboot. I’ve noticed that a portscan will cause the router to reboot if you have a bad DMZ host specified in the DMZ settings. The “Dummy DMZ” is a known method for stealthing Linksys routers, but apparently doesn’t work due to this problem. This problem has been confirmed on the DSLReports discussion board as a problem thats been around for a while, not just in 1.39.2. I’ve found that even with a valid DMZ host, a portscan will sill hose the router. If you turn on the “daignostic logging” (see hidden features section), you can see log entries that say [HH:MMS] Free=xxx, where xxx is getting smaller and smaller until it resets. (Note: this happened with default filtering settings, no spi, block wan, etc)
UDP Traffic Can Cause Reboot. In much the same way as the DMZ problem, sending large amounts of UDP traffic can hose the wireless interface. I used QCheck to send 1mBit of information in 10 seconds from a desktop (wired) to a laptop (wireless). You can see the [HH:MMS] Free=xxx decline. When it gets to 0, the wireless interface activity light goes solid and the router locks. This bug hasn’t been confirmed yet on any message board or newsgroup. (Note: this happened with default filtering settings, no spi, block wan, etc)
hmmm..just curious what model number are you referring to? Is it BEFW11S4 ver 1 or 2???
Yesterday is history. Tomorrow is mystery. Today is a gift.

Extend range of BEFW11S4 Wireless-B broadband router

Hello,
I curently have a linksys wireless-B broadband router (BEFW11S4) and would like to extend it's range, which device should I buy to accomplish this? I guess I could buy a linksys wireless-G access point (WAP54G), but I'm not sure it will work with an wireless-B router (BEFW11S4). Anyone, any ideas?
thanks in advance,
Joeri Kumbruck

yes.... wap54g doesn't work with a wireless - b router.. it will work wirelessly only with another wap54g or wrt54g....even wap11 might not help you..
if you have befw11s4 v 4...then you can try setting up a range expander with it...however , make sure that both the devices have the latest firmware.....

How to run Wired WRTG54G2 V1 in same subnet as my broadband router?

Hi,
I have a linksys broadband router E2000 and a cable running from it to another location where I have a linksys WRTG2 V1.
I would like the WRTG2 to be running in the same subnet as the E2000, but I seem not be able to get this done.
Appreciate any assitance. Is what I'm trying to do (briding I guess?) supported?
regards
Osama Salah

So what you want to do is have these two routers in the same network, right? The WRT54G2 does not have a bridge mode option but this type of setup can easily be done. You simply have to cascade the routers LAN to LAN. For more details, check out this article: Cascading (Connecting) a Linksys router to another router.

Wireless-B Broadband Router(BEFW11S4) Problem

I bought a Wireless-B Broadband Router(BEFW11S4) from someone but it didn't came with the CD is there another way to install it like a driver or something like that

There is no "driver" for your router. Your router has firmware that resides on a flash memory chip in the router. Check your router to see which version of the router you have. This should be listed on the bottom of the router, near the serial number.
To setup your router:
First, download the User Guide from the Linksys web site:
http://www.linksys.com/servlet/Satellite?c=L_Content_C1&childpagename=US%2FLayout&cid=1115416835852&...
Next, reset the router to factory defaults (see the User Guide for directions).
Then go to Linksys.com > Support > Technical Support > EasyLink Home Networking Tools > then use EasyLink Connect to configure your router.
Message Edited by toomanydonuts on 10-07-2007 05:36 AM

How to disable wireless for Version 4 G LTE Broadband Router with Voice?

How can I disable wireless on the Version 4 G LTE Broadband Router with Voice?

Gothcha! Thanks so much for following up and providing this information, James2014. I've provided a link with the instructions to turn off the wireless radio on the device. Check it out here, http://vz.to/VEHZt0
YosefT_VZW
Follow us on Twitter @VZWSupport

I have a new wireless G broadband router. I am attemptin...

I have a new wireless G broadband router.
I am attempting to set up another computer.
I am using EasyLink Advisor.
It is askig for a router password.
Where do I find the Router's Password?

While installing the router if you used any password it is asking you that password .... if you forgot that you need to reset the router by holding the reset button ... If you had not used any password.... use admin as password withoput any username ... See if it works ...

TS3274 Not for sure if wireless broadband router is working I have downloaded Itunes on computer I don't think I can coonect to Wi-Fi; any suggestions

How would I know if my Wireless Broadband router is working? I get a list oif Network to choose but then I am asked to put in IP address when not connected to the computer. If I am connected to the computer the computer I am assuming IP address shows but even though I have downloaded Ituned to the computer; I cannot retrieve Itunes or App Storeon the IPAD.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Wirelss G Broadband Router - Moved and got a new computer. Need to set it up but..

I have a Wireless G Broadband Router. I have moved, I also have a new laptop and don't have access to the old one any longer. To make it even more challenging I have packed away the old password and login information in a storage unit I can not access. Trying to get the router set up again so I can work and my husband can work. HELP!. I run the steps and it goes fine until the Step 4/4 which says plug the wirless router cord into the electrical outlet on the wall..then it says waiting for router. During this time my computer bounces from internet access to no internet access to internet access and back again. then says it failed. Says the it appears that the ethernet is not connected properly.
Solved!
Go to Solution.

This is how to access what I like to call the GUI: Access GUI
This is how you'll change the name and password of the wireless network: Wireless Setup
And this is how you change the default password used to access the router's GUI: Change GUI Password
I highly recommend WPA2 personal security for the wireless network, NOT the insecure WEP.
If you need more help just ask, but here's a knowledge Base that you can use too.
I don't work for Cisco. I'm just here to help.

MI424WR (Rev. F) - Wireless Broadband Router - Need Rev G for NAS

I want to put a Buffalo NAS storage device on the USB port on the MI424WR (Rev. F) - Wireless Broadband Router, but Actiontec says a firmware upgrade to Rev G is needed to do this. If I do the upgrade (will it even allow it?) will I trash my router such that it won't work (and I may not be able to restore it to Rev F)? Anyone have any experience attempting this?

davef wrote:
Not sure what you mean by "not enabled". I use this USB port on the router to charge my EVO smartphone.
There is indeed power on the USB port, so charging USB devices does work.
What I meant by "not enabled", is that there is no firmware support of any kind.
No mass storage driver, etc.

Broadband router

Similar Messages

Maybe you are looking for