Broadband signal keeps dropping after upgrade

Ok, I recently upgraded my broadband from BT Total Broadband to Unlimited Broadband extra, where I also upgrade from HH3 to HH4. Since the upgrade I have noticed that my signal bars have been dropping on my PC, iPad & PS3 every couple of minute from full 5 bars to 4. This was never a problem before. It just fluctuates all the time.
I have tried changing channels using the smart wireless function, but this hasnt solved it.
The HH4 is in the exact location where my HH3 was, so shouldnt be the place of the hub causing the drops.
My knowledge is very limited on this subject, but I have never had this problem before.

a fluctuation of 5 to 4 bars should not cause a problem to your wireless devices. if you change channel then you woul change to manual and select your preferred wifi channel. if that is what you want then I would use inssider from metageek and that will show wifi ssids round about you and the free channels.. you can then select a free channel and change the channel in the hub and see if that helps
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

BT Broadband signal keeps dropping

Hello BT community,
I have BT Broadband and the signal keeps dropping. For your information:
I am using a Draytek 2850N with firmware version: 3.6.2_2471201
I am not sure whether the line is ADSL or ADSL2+
The exchange is Chobham and has exchange code: THCH
I am 1.2 miles from the exchange
The symptoms of the problem are simply that we loose the signal and cannot browse the web.  I have bought a brand new ADSL Filter and the router itself is brand new (replacing the BT Home Hub 1.x).
The strangest thing is that when the connection drops I can get it back by dialing out on our telephone which used the same line as the broadband and after a few seconds of listening to the time (I dialled 123) the router re-synch's if you leave the router to do this on it's own the connection does not reform; which I think is quite weird.
If you telnet onto the router and run log -wt I can see the following:
5:56:13.150 ISDN1<<<<PPPoE (WAN-1) Len = 45
    Protocol:CHAP(c223)
        Success Identifier:0x01CHAP authentication success, unit 29568 ##
5:56:13.200 ISDN1<<<<PPPoE (WAN-1) Len = 24
    Protocol:IPCP(8021)
        ConfNak Identifier:0x01
            IP Address: 86 143 121 235
            Primary Domain Name Server: 194 74 65 68
            Secondary Domain Name Server: 213 120 234 62 ##
5:57:02.690 ISDN1>>>>PPPoE (WAN-1) Len = 10     Protocol:LCP(c021)         EchoRep Identifier:0x04Magic Number: 0x0 00 00 ##
5:57:09.580 DSL: LineFailure Update: DSL_G997_LINEFAILURE_LOSIPLM 5:57:09.620 DSL: NE Loss of Signal, rebooting DSL state machine 5:57:09.630 DSL: LineFailure Update: DSL_G997_LINEFAILURE_LOSIPLM 5:57:09.650 ISDN1>>>>PPPoE (WAN-1) Len = 6     Protocol:LCP(c021)         TermReq Identifier:0x02 ##
5:57:09.740 DSL: DSL Rebooting...IPLM 5:57:10.080 DSL: Modem Shut Down from ADSL Phy Layer (0) 5:57:27.830 ==>PPPoE (WAN-1) Len = 6 V:1 T:1 PADT ID:6
Can anyone tell me if this is BT's problem as I have replaced all of my kit. Coult it be BT's NTE or even their network?
Solved!
Go to Solution.

Hi Welcome to the forums
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
once you have posted the information asked for then the community members can help you more
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

My iPhone 4s keeps restrating after upgrading to iOS 7.1.2 and comes up with recovery mode.

My iPhone 4s keeps restrating after upgrading to iOS 7.1.2. I tried to restore for few times using iTunes and installed only 8 apps freshly from iTunes apps store. After restating the phone goes to recover mode every time. Last time it came up with a diagnostic massage with a big apple logo saying..'we are hanging there'. I am really frustrated with Apple coz my last mobile 3GS's network circuit was so poor that I could not use that to make call. However can any one help me with my iPhone 4s problem? I've no warranty left that's why I think apple will not help me any ways.

Try changing the channel on your router to manually select & use,the highest number channel available. After I did that I no longer had the problem.

My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2

My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2, someone with the same problem? Just think when I enable the 3G, soon followed falls again.
I have already put another chip carrier and the same problem happens, my phone is factory unlocked.

Had same problem with iphone5 6.1.2 update. First tried reset network settings and didn work... Support recommend me a restore and ended up in recovery loop with iTunes error (-1)
Been at my carrier store (Optimus Portugal)... and iPhone sent to warranty. After 2 macbooks, 1 imac, 2 appletvs, 2 iphones, 1 ipod... I find disappointment with apple reliability....
At least the support guys at Optimus Portugal were very helpful and friendly, but I'll be 15 days without iPhone...
Regards
Joao

Broadband adsl keeps dropping (Hub3)

ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:46:34
Downstream:
13.74 Mbps
Upstream:
1.101 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
6.4 dB / 6.2 dB
Line attenuation (Down/Up):
27.8 dB / 14.8 dB
Output power (Down/Up):
20.5 dBm / 12.6 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
121 / 32
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
319 / 7
Error Seconds (Local/Remote):
103 / 0
Above are the stats. I have a BT Home Hub 3, the connection keeps dropping. I have just done a silence sound test but could not hear any noise (i did not get disconnected then though). I have had BT doing line tests (home visits too) and the broad band people tell me there is a problem with the line. The line people say its all good.
Any help or advise would be appreciated. Also who do I call to change latency and/or noise parameters? the usual call centre or is there another phone?
Many thanks
Filip
Solved!
Go to Solution.

that is the test socket and is your direct connection to the exchnage and eliminates any internal wiring problems
check this post and see if anything applies
http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Apps keep crashing after upgrade to ios 7 ipad2

After upgrading to ios 7 most of my apps keep crashing on ipad2 why? Do i need to re-install them? Please help

i am having the same experience (as well as several other problems) since installing iOS7 on my iPad2. The apps briefly appear to open when I tap their icons, but then disappear. double tapping the Home key to bring up the multi-tasking view idicates that the apps are running in the background but, I cannot access them.
This fiasco began because I was unable to login to my One-to-One account after the iOS7 update. I spent 4 hrs on the phone last night, with 4 different people from Apple support, restoring the iPad to factory settings & then restoring the image from my iCloud backup, only to end up with the situation described above. And I still can't login to my One-to-One account, plus I amnow also unable to access the iTunes store. I am sure there are other problems that I have yet to discover.
This has been such a "Windows" experience that I find myself wondering if Apple truly has lost its mojo & mystique. Are their pretty products worth their premium prices? More importantly, are they worth the frustration I experience, & the time that lost from my life, in trying to resolve problems with their"improvements". If asked today, my answer would be a very loud & resounding "NO"!!!!!

Broadband connection keeps dropping, often without...

Equipment: I have an ancient hub (curious- do we get updates to these or do we just have to make do for years on end?), the first black one which is curved and it has been fine since I got it from a friend some years ago to replace the dinosaur white one BT supplied me with the day I got Broadband.
It is plugged directly into the master socket via a filter which has the only other other piece of equipment on it- a phone.
The Problem: Since about the time I had the BT Talk function turned off (December 2013) the Broadband connection (not the Wifi) has been dropping daily. After that date I noticed that it would drop just whenever I got a call on the landline phone. I didn't address it then because I get perhaps five or six calls a week on my landline and so it was not noticable or an issue.
But tonight it even dropped after just a few seconds in a Google Hangout; something I was able to do last week without problem. I am assuming it is because of the talking, as it must be similar to Skype etc? In total it has dropped randomly about 7 times and 6 or so times during the Google Hangout which I had to abort.
Summary of problem: Basically it is as though the removal of the BT Talk triggered the Broadband connection problem which is increasing in frequency and severity.
Actions taken: I have power-cycled, checked that I don't have a buzz on the phone-line, unplugged, checked and replugged the two cables (power and phone cable to hub). They are not damaged/loose/wet/different from normal. I have also used the trouble-shooter online at BT.
Aside: What I can say is that over the years I have had horrendous problems with total loss of Broadband/telephone and even worse service with BT constantly blaming my "equipment" for the problems and every single time it turned out to be their equipment or even their engineers at fault (one simply unplugged us at the junction and gave our line to someone else and, though, I reported it within minutes of it happening and why, it took days for them to undo) so that I am not entirely surprised that something is amiss.
Question: I am hoping someone here has an answer so that I don't HAVE to phone yet again (I have spent in excess of 60 hours on the phone with BT over the lifetime of this service with 37.5 spent to resolve one incident) or, worse, get billed £480 for nothing. DOES anyone know what I can do to sort this? Does anyone know what is wrong?
Please and thank you.
may you always do for others and let others do for you ~Bob Dylan

Thank you for your reply john46.
It sounds like a possible high resistance joint have you tried connecting to the test socket and see if that resolves the problem it will also remove the risk of any charges when an engineer attends as they will have to to resolve the problem
Yes.
The only thing I haven't done is tried another filter. Will try that tomorrow. However- it does seem awfully coincidental and nothing has changed here with the hub sitting less than four inches from the master socket as it has always done.
Then again it could just be that the hub is not up to par and the removal of BT Talk might just have been its death knell (mind you- I didn't even have a BT Talk phone any longer- that would have been with the first hub at the princely sum of £70 which never worked due to our line just being too "poor" or something very technical like that).
I am not sure where you have got the figure of £480 from as you will only be charged it the fault is found on your internal wiring or equipment
I didn't "get" the figure of £480 from anywhere. BT did. They charged me £240 for something which was their fault because the lass, allegedly in Bangalore (I grew up on Pondicherry, not too many miles away), misunderstood syntax and presumed to bill me for something the engineer already determined was not my responsibility. And when I telephoned to tell BT that I had been billed in error her colleague billed me again instead of refunding me: £240 + £240 = £480
It took an inordinate amount of patience on my part to explain this to a third BT customer service person as they (naturally) refused to believe me when I reported their colleagues' errors.
Had it not been for the 36.5 hours previously spent troubleshooting another problem for BT staff (38 of them- I have all their names and various flights of fancy written down somewhere) I'd have thought I was imagining things.
And so, when the engineer unplugged my line and blithely connected it to a new house in a junction box three miles down the road (as the better half was driving by no less) and we were able to give BT the time and location of where the "problem" authored from, which still only led to an engineer having to be sent to "investigate" the fault at our end some three days late- I was no longer capable of surprise.
It is why I thought to ask if anyone had any experience with connections dropping out here first. Might save me my last marble.
Well- it was worth a try.
may you always do for others and let others do for you ~Bob Dylan

Broadband Connection keeps dropping out.

can some one ring me from sky broadband department plz as my internet keeps dropping out all the time i do not have a home phone only a mobile phone

Try the Sky service app .................... http://help.sky.com/articles/sky-service-app

New tab keeping freezing after upgrade to v35 on Ubuntu 14.10

After upgrading to Firefox 35 on Ubuntu 14.10, I keep experiencing browser freeze every time when I open a new tab. The browser freezes about 30 seconds when a new tab is launched.
Is there anyone encountering the same problem? and How can this problem be fixed?

Thanks for the reply. Tried, but didn't work. The freezing is actually trigged when I type in the address bar. I have tried different trouble shooting methods, but none of them works. The browser keeps freezing. There was no problem before upgrading to version 35. Maybe there is a bug. How can I submit a bug report?

RE: WiFi signal keeps dropping

Since the start of this week the wireless signal from my HH3 keeps dropping and coming back. At first I thought it would have to do with the wireless channels but it wasn't that. I restarted my hub numerous times as well but this hasn’t resolved anything. I’m now thinking that the problem may be with the hub itself. Can anyone tell me what the problem may be?
Thank You

When you say you reset it was that a facory reset using the recessed button on back and jolding until lights flash?
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Battery life dropped after upgrading to Mountain Lion

I have a Macbook Pro 2010. After upgrading to OS X Mountain Lion the battery life get dropped dramatically. Before it was ~4 hours and now has lowered to ~2.5 hours.
I saw a lot of complains but no official reaction from Apple.

Use this > http://www.apple.com/batteries/notebooks.html Wait an update

Radiusd keeps crashing after upgrading to Mountain Lion

After upgrading a Mac mini with Lion server to Mountain Lion 10.8.2, Radius functions no more. The log shows a repeating crash of radiusd. How can I solve this problem? On Lion the Radius service functioned without problems giving access to our users via two Airport Base stations.
Thanks for any hints!
Peter
Process:         radiusd [64965]
Path:            /usr/sbin/radiusd
Identifier:      radiusd
Version:         36
Code Type:       X86-64 (Native)
Parent Process: launchd [1]
User ID:         0
Date/Time:       2012-11-13 09:08:32.626 +0100
OS Version:      Mac OS X 10.8.2 (12C60)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008
VM Regions Near 0x8:
-->
    __TEXT                 000000010f84f000-000000010f883000 [ 208K] r-x/rwx SM=COW /usr/sbin/radiusd
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_c.dylib                       0x00007fff868b03d0 strcpy + 80
1   libfreeradius-eap-2.1.12.dylib          0x000000010fa80e4d cbtls_password + 17
2   libcrypto.0.9.8.dylib                   0x00007fff910649af PEM_do_header + 111
3   libcrypto.0.9.8.dylib                   0x00007fff91063eba PEM_bytes_read_bio + 698
4   libcrypto.0.9.8.dylib                   0x00007fff910488d8 PEM_read_bio_PrivateKey + 120
5   libssl.0.9.8.dylib                      0x00007fff8f26db7d SSL_CTX_use_PrivateKey_file + 173
6   rlm_eap_tls-2.1.12.so                   0x000000010fa9a7b6 0x10fa99000 + 6070
7   rlm_eap-2.1.12.so                       0x000000010fa7689f eaptype_load + 383
8   rlm_eap-2.1.12.so                       0x000000010fa75c54 0x10fa75000 + 3156
9   radiusd                                 0x000000010f85d826 0x10f84f000 + 59430
10 radiusd                                 0x000000010f8605fe 0x10f84f000 + 71166
11 radiusd                                 0x000000010f85eb42 0x10f84f000 + 64322
12 radiusd                                 0x000000010f85df09 0x10f84f000 + 61193
13 radiusd                                 0x000000010f85db9f 0x10f84f000 + 60319
14 radiusd                                 0x000000010f85e6e8 0x10f84f000 + 63208
15 radiusd                                 0x000000010f85ce52 0x10f84f000 + 56914
16 radiusd                                 0x000000010f8616d2 0x10f84f000 + 75474
17 libdyld.dylib                           0x00007fff8f1997e1 start + 1
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x0000000000000000 rcx: 0x00007fff503aea90 rdx: 0x0000000000000100
rdi: 0x00007fff503aea90 rsi: 0x0000000000000000 rbp: 0x00007fff503ae9a0 rsp: 0x00007fff503ae988
   r8: 0x0000000000000000   r9: 0x0000000088dab500 r10: 0x00007fff935370e0 r11: 0x00007fff868b0380
r12: 0x00007f9f52e0e110 r13: 0x00007fff503aef30 r14: 0x00007f9f52e17f20 r15: 0x0000000000000000
rip: 0x00007fff868b03d0 rfl: 0x0000000000010206 cr2: 0x0000000000000008
Logical CPU: 1
Binary Images:
       0x10f84f000 -        0x10f882ff7 radiusd (36) <86313FE2-7427-3985-A971-D35CFDB7F37B> /usr/sbin/radiusd
       0x10f894000 -        0x10f8aefff com.apple.nt (1.1 - 1) <735FA431-4191-3720-843D-332638632FC4> /System/Library/PrivateFrameworks/nt.framework/Versions/A/nt
       0x10f8cc000 -        0x10f8e3ff7 libfreeradius-radius-2.1.12.dylib (36) <68C50C03-FE72-397B-85F7-4FA1CBA68FDE> /usr/lib/freeradius/libfreeradius-radius-2.1.12.dylib
       0x10f8ec000 -        0x10f8edfff rlm_exec-2.1.12.so (36) <C54589A1-B17B-34B1-8028-4D88CA1C2ADC> /usr/lib/freeradius/rlm_exec-2.1.12.so
       0x10f8f3000 -        0x10f8f8fff libltdl.3.dylib (36) <F8B0DCC5-B71A-34E2-8957-2A58AC11CFFA> /usr/lib/freeradius/libltdl.3.dylib
       0x10f8fe000 -        0x10f976fff com.apple.DCERPC (1.5 - 53.1.1) <25F4A15A-5252-3C70-A1D0-8145357F78B8> /System/Library/PrivateFrameworks/DCERPC.framework/Versions/A/DCERPC
       0x10f99b000 -        0x10f99cff7 rlm_expr-2.1.12.so (36) <BE9B81D5-BD2F-387C-A61F-197C486C530B> /usr/lib/freeradius/rlm_expr-2.1.12.so
       0x10f9a0000 -        0x10f9b9ff7 com.apple.SMBClient (1.8 - 1.8) <B30889AB-8E45-3E57-9DC8-1212E2B87A95> /System/Library/PrivateFrameworks/SMBClient.framework/Versions/A/SMBClient
       0x10fa20000 -        0x10fa20fff rlm_expiration-2.1.12.so (36) <B6CA8319-4B5D-3283-B41C-38694AC9F667> /usr/lib/freeradius/rlm_expiration-2.1.12.so
       0x10fa24000 -        0x10fa25fff rlm_logintime-2.1.12.so (36) <17D9E2DD-ECF5-38BB-8B36-0D133B85C679> /usr/lib/freeradius/rlm_logintime-2.1.12.so
       0x10fa29000 -        0x10fa2efff rlm_sql-2.1.12.so (36) <454D52CC-5B43-375C-A5CA-8C687EFFE72B> /usr/lib/freeradius/rlm_sql-2.1.12.so
       0x10fa33000 -        0x10fa34fff rlm_sql_sqlite-2.1.12.so (36) <981C7A7B-F0DA-3C56-9B8B-0BA65A001EF4> /usr/lib/freeradius/rlm_sql_sqlite-2.1.12.so
       0x10fa50000 -        0x10fa52fff rlm_pap-2.1.12.so (36) <E1325621-4F8E-3387-9752-F16525F38A40> /usr/lib/freeradius/rlm_pap-2.1.12.so
       0x10fa56000 -        0x10fa56fff rlm_chap-2.1.12.so (36) <428AF58C-A299-392B-B125-AC2CB3EBA97A> /usr/lib/freeradius/rlm_chap-2.1.12.so
       0x10fa5a000 -        0x10fa5fff7 rlm_mschap-2.1.12.so (36) <CC6F0B14-8E1B-39AA-95F5-494EE7F4CBCD> /usr/lib/freeradius/rlm_mschap-2.1.12.so
       0x10fa64000 -        0x10fa66fff rlm_digest-2.1.12.so (36) <83A72E86-A6FE-3951-80F8-04F37ABDEFAE> /usr/lib/freeradius/rlm_digest-2.1.12.so
       0x10fa6a000 -        0x10fa6bfff rlm_opendirectory-2.1.12.so (36) <AA6FFD60-E037-34B3-822D-9DBC29EE3F54> /usr/lib/freeradius/rlm_opendirectory-2.1.12.so
       0x10fa70000 -        0x10fa71ff7 rlm_unix-2.1.12.so (36) <B1E70FFD-DC4D-3EC8-9505-78D3DFB79209> /usr/lib/freeradius/rlm_unix-2.1.12.so
       0x10fa75000 -        0x10fa79fff rlm_eap-2.1.12.so (36) <0060D283-E674-355D-9693-F5A85F2B332F> /usr/lib/freeradius/rlm_eap-2.1.12.so
       0x10fa7e000 -        0x10fa84fff libfreeradius-eap-2.1.12.dylib (36) <B06BCAB1-DD3E-35B7-9256-5830A5796225> /usr/lib/freeradius/libfreeradius-eap-2.1.12.dylib
       0x10fa8a000 -        0x10fa8bfff rlm_eap_md5-2.1.12.so (36) <9A5061FE-6099-38D0-B5B0-B339F3A477FA> /usr/lib/freeradius/rlm_eap_md5-2.1.12.so
       0x10fa8f000 -        0x10fa91ff7 rlm_eap_leap-2.1.12.so (36) <98F0FD68-FA2C-39F5-BFA8-1E5F0678BA13> /usr/lib/freeradius/rlm_eap_leap-2.1.12.so
       0x10fa95000 -        0x10fa95fff rlm_eap_gtc-2.1.12.so (36) <0EBD1E12-2F58-3AC1-B1FF-FE1F8389ABFD> /usr/lib/freeradius/rlm_eap_gtc-2.1.12.so
       0x10fa99000 -        0x10fa9dfff rlm_eap_tls-2.1.12.so (36) <1C080A2B-5587-369F-A432-27DA64306B07> /usr/lib/freeradius/rlm_eap_tls-2.1.12.so
    0x7fff6f44f000 -     0x7fff6f48393f dyld (210.2.3) <36CAA36E-72BC-3E48-96D9-B96A2DF77730> /usr/lib/dyld
    0x7fff868ae000 -     0x7fff8697afe7 libsystem_c.dylib (825.25) <8CBCF9B9-EBB7-365E-A3FF-2F3850763C6B> /usr/lib/system/libsystem_c.dylib
    0x7fff87ef9000 -     0x7fff87f0eff7 libdispatch.dylib (228.23) <D26996BF-FC57-39EB-8829-F63585561E09> /usr/lib/system/libdispatch.dylib
    0x7fff88085000 -     0x7fff88085fff libOpenScriptingUtil.dylib (148.2) <B8061D13-C1B2-38D5-A723-9A98D64E67AC> /usr/lib/libOpenScriptingUtil.dylib
    0x7fff880e4000 -     0x7fff880e5fff libDiagnosticMessagesClient.dylib (8) <8548E0DC-0D2F-30B6-B045-FE8A038E76D8> /usr/lib/libDiagnosticMessagesClient.dylib
    0x7fff880e6000 -     0x7fff880ebfff libcompiler_rt.dylib (30) <08F8731D-5961-39F1-AD00-4590321D24A9> /usr/lib/system/libcompiler_rt.dylib
    0x7fff881a9000 -     0x7fff881b0fff com.apple.NetFS (5.0 - 4.0) <82E24B9A-7742-3DA3-9E99-ED267D98C05E> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
    0x7fff88321000 -     0x7fff8836dff7 libauto.dylib (185.1) <73CDC482-16E3-3FC7-9BB4-FBA2DA44DBC2> /usr/lib/libauto.dylib
    0x7fff8837c000 -     0x7fff883b6fff com.apple.GSS (3.0 - 2.0) <0BDF8090-5EF4-3759-94DE-8521D74188AA> /System/Library/Frameworks/GSS.framework/Versions/A/GSS
    0x7fff88724000 -     0x7fff88781ff7 com.apple.AE (645.3 - 645.3) <FF867ACA-8628-3E5A-8FA0-AF429B42C5D7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
    0x7fff8878d000 -     0x7fff8878dfff libkeymgr.dylib (25) <CC9E3394-BE16-397F-926B-E579B60EE429> /usr/lib/system/libkeymgr.dylib
    0x7fff88793000 -     0x7fff88820ff7 com.apple.SearchKit (1.4.0 - 1.4.0) <C7F43889-F8BF-3CB9-AD66-11AEFCBCEDE7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    0x7fff8888b000 -     0x7fff8888dff7 libunc.dylib (25) <92805328-CD36-34FF-9436-571AB0485072> /usr/lib/system/libunc.dylib
    0x7fff88d1b000 -     0x7fff88d20fff libcache.dylib (57) <65187C6E-3FBF-3EB8-A1AA-389445E2984D> /usr/lib/system/libcache.dylib
    0x7fff8918b000 -     0x7fff89196fff com.apple.CommonAuth (3.0 - 2.0) <74A86DDD-57D0-3178-AB74-E1F31DBFFC39> /System/Library/PrivateFrameworks/CommonAuth.framework/Versions/A/CommonAuth
    0x7fff89197000 -     0x7fff891a5fff libcommonCrypto.dylib (60026) <2D6537F5-1B5E-305C-A1CF-D1FA80CA3939> /usr/lib/system/libcommonCrypto.dylib
    0x7fff89298000 -     0x7fff892a6ff7 libkxld.dylib (2050.18.24) <7027CE49-007D-3553-8FFA-3E3B428B2316> /usr/lib/system/libkxld.dylib
    0x7fff892e8000 -     0x7fff892f5ff7 com.apple.NetAuth (4.0 - 4.0) <F5BC7D7D-AF28-3C83-A674-DADA48FF7810> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
    0x7fff8a084000 -     0x7fff8a39bff7 com.apple.CoreServices.CarbonCore (1037.3 - 1037.3) <DF7CABCA-F2CB-345B-8EFF-F0F4E937B7FF> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
    0x7fff8a5e0000 -     0x7fff8a93cfff com.apple.Foundation (6.8 - 945.11) <A5D41956-A354-3ACC-9355-BE200072223B> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x7fff8aa77000 -     0x7fff8aac6ff7 libcorecrypto.dylib (106.2) <CE0C29A3-C420-339B-ADAA-52F4683233CC> /usr/lib/system/libcorecrypto.dylib
    0x7fff8aac8000 -     0x7fff8ab30ff7 libc++.1.dylib (65.1) <20E31B90-19B9-3C2A-A9EB-474E08F9FE05> /usr/lib/libc++.1.dylib
    0x7fff8ab6b000 -     0x7fff8acdffff com.apple.CFNetwork (596.2.3 - 596.2.3) <6A16C2BD-1035-30F9-AE96-D9E3BB54A976> /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
    0x7fff8b787000 -     0x7fff8b7b2fff libxslt.1.dylib (11.3) <441776B8-9130-3893-956F-39C85FFA644F> /usr/lib/libxslt.1.dylib
    0x7fff8b7b8000 -     0x7fff8b7b9ff7 libremovefile.dylib (23.1) <DBBFAF35-AC78-3856-92F6-6E4FD9DF14A2> /usr/lib/system/libremovefile.dylib
    0x7fff8b7ba000 -     0x7fff8b7f0fff libsystem_info.dylib (406.17) <4FFCA242-7F04-365F-87A6-D4EFB89503C1> /usr/lib/system/libsystem_info.dylib
    0x7fff8b899000 -     0x7fff8b89aff7 libsystem_sandbox.dylib (220) <3C3B03CF-C525-3CB3-8557-62E91B93AC95> /usr/lib/system/libsystem_sandbox.dylib
    0x7fff8baf7000 -     0x7fff8bb64fff com.apple.datadetectorscore (4.0 - 269.1) <B69645EB-C4BF-3D52-A49B-CB1A1A88512F> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
    0x7fff8bd02000 -     0x7fff8beebfff com.apple.CoreFoundation (6.8 - 744.12) <EF002794-DAEF-31C6-866C-E3E3AC387A9F> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x7fff8bf46000 -     0x7fff8c05e92f libobjc.A.dylib (532.2) <90D31928-F48D-3E37-874F-220A51FD9E37> /usr/lib/libobjc.A.dylib
    0x7fff8c05f000 -     0x7fff8c084ff7 libc++abi.dylib (24.4) <E7BD9363-1D25-3551-A68A-2E2FF6ABECD7> /usr/lib/libc++abi.dylib
    0x7fff8c11a000 -     0x7fff8c125fff libsystem_notify.dylib (98.5) <C49275CC-835A-3207-AFBA-8C01374927B6> /usr/lib/system/libsystem_notify.dylib
    0x7fff8c132000 -     0x7fff8c19fff7 com.apple.framework.IOKit (2.0 - 755.18.10) <142E19DD-1C8D-3D61-ABC8-83994A73279F> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x7fff8c430000 -     0x7fff8c44bff7 libsystem_kernel.dylib (2050.18.24) <C0535565-35D1-31A7-A744-63D9F10F12A4> /usr/lib/system/libsystem_kernel.dylib
    0x7fff8c456000 -     0x7fff8c457fff liblangid.dylib (116) <864C409D-D56B-383E-9B44-A435A47F2346> /usr/lib/liblangid.dylib
    0x7fff8c45d000 -     0x7fff8c55afff libsqlite3.dylib (138.1) <ADE9CB98-D77D-300C-A32A-556B7440769F> /usr/lib/libsqlite3.dylib
    0x7fff8c5b0000 -     0x7fff8c661fff com.apple.LaunchServices (539.7 - 539.7) <DA7C602E-5E01-31B8-925D-B45360CA089F> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
    0x7fff8c702000 -     0x7fff8c76bfff libstdc++.6.dylib (56) <EAA2B53E-EADE-39CF-A0EF-FB9D4940672A> /usr/lib/libstdc++.6.dylib
    0x7fff8c76c000 -     0x7fff8c76cfff com.apple.CoreServices (57 - 57) <9DD44CB0-C644-35C3-8F57-0B41B3EC147D> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x7fff8c76d000 -     0x7fff8c76ffff libquarantine.dylib (52) <4BE2E642-A14F-340A-B482-5BD2AEFD9C24> /usr/lib/system/libquarantine.dylib
    0x7fff8c8b8000 -     0x7fff8c8bdfff com.apple.OpenDirectory (10.8 - 151.10) <CF44120B-9B01-32DD-852E-C9C0E1243FC0> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
    0x7fff8c8c0000 -     0x7fff8c9bdff7 libxml2.2.dylib (22.3) <47B09CB2-C636-3024-8B55-6040F7829B4C> /usr/lib/libxml2.2.dylib
    0x7fff8cf11000 -     0x7fff8cf28fff com.apple.GenerationalStorage (1.1 - 132.2) <3F5C87BD-D866-3732-8CB9-D23ED9784D6E> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
    0x7fff8d1c2000 -     0x7fff8d1cffff com.apple.KerberosHelper (4.0 - 1.0) <6815439D-1A03-3251-99FE-CC24CF4C93C5> /System/Library/PrivateFrameworks/KerberosHelper.framework/Versions/A/KerberosH elper
    0x7fff8d1d2000 -     0x7fff8d1e5ff7 libbsm.0.dylib (32) <F497D3CE-40D9-3551-84B4-3D5E39600737> /usr/lib/libbsm.0.dylib
    0x7fff8d2c1000 -     0x7fff8d2c5ff7 com.apple.TCC (1.0 - 1) <F2F3B753-FC73-3543-8BBE-859FDBB4D6A6> /System/Library/PrivateFrameworks/TCC.framework/Versions/A/TCC
    0x7fff8d3ac000 -     0x7fff8d5acfff libicucore.A.dylib (491.11.1) <CC318A27-878A-38CE-9292-1B98353FA9C7> /usr/lib/libicucore.A.dylib
    0x7fff8d5b1000 -     0x7fff8d5c8fff com.apple.CFOpenDirectory (10.8 - 151.10) <10F41DA4-AD54-3F52-B898-588D9A117171> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
    0x7fff8d5c9000 -     0x7fff8d5d0fff libcopyfile.dylib (89) <876573D0-E907-3566-A108-577EAD1B6182> /usr/lib/system/libcopyfile.dylib
    0x7fff8d9d0000 -     0x7fff8da76ff7 com.apple.CoreServices.OSServices (557.4 - 557.4) <841878A8-6F3E-300D-8F01-444B3CC1F41D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
    0x7fff8db67000 -     0x7fff8db86ff7 libresolv.9.dylib (51) <0882DC2D-A892-31FF-AD8C-0BB518C48B23> /usr/lib/libresolv.9.dylib
    0x7fff8dbe2000 -     0x7fff8dc64fff com.apple.Heimdal (3.0 - 2.0) <660A6C64-4912-32C8-A332-B64164032A2D> /System/Library/PrivateFrameworks/Heimdal.framework/Versions/A/Heimdal
    0x7fff8e1f6000 -     0x7fff8e203fff libbz2.1.0.dylib (29) <CE9785E8-B535-3504-B392-82F0064D9AF2> /usr/lib/libbz2.1.0.dylib
    0x7fff8e210000 -     0x7fff8e216fff com.apple.DiskArbitration (2.5.1 - 2.5.1) <F7DAF7CC-5893-3F06-9168-3B0192B66D15> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
    0x7fff8ee3c000 -     0x7fff8ee5dff7 libCRFSuite.dylib (33) <736ABE58-8DED-3289-A042-C25AF7AE5B23> /usr/lib/libCRFSuite.dylib
    0x7fff8f197000 -     0x7fff8f19aff7 libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
    0x7fff8f1c4000 -     0x7fff8f1c5fff libsystem_blocks.dylib (59) <D92DCBC3-541C-37BD-AADE-ACC75A0C59C8> /usr/lib/system/libsystem_blocks.dylib
    0x7fff8f1c6000 -     0x7fff8f247fff com.apple.Metadata (10.7.0 - 707.3) <A45D75C1-B311-39F0-AF4A-63FCCC098C1D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
    0x7fff8f248000 -     0x7fff8f27fff7 libssl.0.9.8.dylib (47) <923945E6-C489-3406-903B-A362410753F8> /usr/lib/libssl.0.9.8.dylib
    0x7fff8f2be000 -     0x7fff8f2c6fff liblaunch.dylib (442.26.2) <2F71CAF8-6524-329E-AC56-C506658B4C0C> /usr/lib/system/liblaunch.dylib
    0x7fff8f4ac000 -     0x7fff8f4aefff com.apple.TrustEvaluationAgent (2.0 - 23) <A97D348B-32BF-3E52-8DF2-59BFAD21E1A3> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
    0x7fff8f4b3000 -     0x7fff8f4b4ff7 libSystem.B.dylib (169.3) <9089D72D-E714-31E1-80C8-698A8E8B05AD> /usr/lib/libSystem.B.dylib
    0x7fff8f4b5000 -     0x7fff8f4bdff7 libsystem_dnssd.dylib (379.32.1) <62AA0B84-188A-348B-8F9E-3E2DB08DB93C> /usr/lib/system/libsystem_dnssd.dylib
    0x7fff8f572000 -     0x7fff8f573ff7 libdnsinfo.dylib (453.18) <E7595861-ECF9-336E-9901-BED2620FAA80> /usr/lib/system/libdnsinfo.dylib
    0x7fff8f96b000 -     0x7fff8f979ff7 libsystem_network.dylib (77.10) <0D99F24E-56FE-380F-B81B-4A4C630EE587> /usr/lib/system/libsystem_network.dylib
    0x7fff8f97a000 -     0x7fff8f989ff7 libxar.1.dylib (105) <370ED355-E516-311E-BAFD-D80633A84BE1> /usr/lib/libxar.1.dylib
    0x7fff90476000 -     0x7fff9047cff7 libunwind.dylib (35.1) <21703D36-2DAB-3D8B-8442-EAAB23C060D3> /usr/lib/system/libunwind.dylib
    0x7fff90fcd000 -     0x7fff910cffff libcrypto.0.9.8.dylib (47) <74F165AD-4572-3B26-B0E2-A97477FE59D0> /usr/lib/libcrypto.0.9.8.dylib
    0x7fff910d0000 -     0x7fff913a0fff com.apple.security (7.0 - 55179.1) <639641EF-8156-3190-890C-1053658E044A> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x7fff91e54000 -     0x7fff91e5afff libmacho.dylib (829) <BF332AD9-E89F-387E-92A4-6E1AB74BD4D9> /usr/lib/system/libmacho.dylib
    0x7fff91f2e000 -     0x7fff91f32fff libpam.2.dylib (20) <C8F45864-5B58-3237-87E1-2C258A1D73B8> /usr/lib/libpam.2.dylib
    0x7fff922ea000 -     0x7fff922fcff7 libz.1.dylib (43) <2A1551E8-A272-3DE5-B692-955974FE1416> /usr/lib/libz.1.dylib
    0x7fff9248f000 -     0x7fff924e0ff7 com.apple.SystemConfiguration (1.12.2 - 1.12.2) <E095637C-457F-3D8F-AE32-A032F9D5A46C> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x7fff9308c000 -     0x7fff930baff7 libsystem_m.dylib (3022.6) <B434BE5C-25AB-3EBD-BAA7-5304B34E3441> /usr/lib/system/libsystem_m.dylib
    0x7fff930c8000 -     0x7fff930f9ff7 com.apple.DictionaryServices (1.2 - 184.4) <054F2D6F-9CFF-3EF1-9778-25C551B616C1> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
    0x7fff93184000 -     0x7fff931a6ff7 libxpc.dylib (140.41) <FAC04D8B-680E-325F-8F0C-DD69859D0E01> /usr/lib/system/libxpc.dylib
External Modification Summary:
Calls made by other processes targeting this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
Calls made by this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
Calls made by all processes on this machine:
    task_for_pid: 1235
    thread_create: 0
    thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=83.6M resident=62.7M(75%) swapped_out_or_unallocated=20.9M(25%)
Writable regions: Total=19.8M written=1332K(7%) resident=2504K(12%) swapped_out=0K(0%) unallocated=17.4M(88%)
REGION TYPE                      VIRTUAL
===========                      =======
MALLOC                             11.3M
MALLOC guard page                    32K
SQLite page cache                    96K
STACK GUARD                        56.0M
Stack                              8192K
VM_ALLOCATE                           8K
__DATA                             3680K
__LINKEDIT                         53.5M
__TEXT                             30.1M
__UNICODE                           544K
mapped file                          52K
shared memory                        12K
===========                      =======
TOTAL                             163.3M

Peguist,
While I cannot be sure what is happening to your system, I can point to the following :
See Strontium90's post about modes required on the Airport here : https://discussions.apple.com/thread/4172384?start=0&tstart=0
I was only able to get RADIUS to work with my Cisco ASAs by manually editing the /etc/raddb/clients.conf file and adding each ASA as indicated in the comments. Details here : https://discussions.apple.com/message/19245469#19245469
Hope this helps.
-Erich

Bluetooth Mighty Mouse keeps freezing after upgrading to Leopard

My bluetooth mighty mouse has frequent, intermittent freezes (which appear to be a loss of sync to the iMac) after upgrading to Leopard (now 10.5.1) from 10.4.11 on my iMac 24" alum body. This mouse was rock solid on my iMac running Tiger. Luckily I do have a corded mouse which I've been forced to use the past week or so.
Can anyone suggest anything?
Thanks.

I was just trying to help my Dad with the same exact issue (Mighty Mouse stops working on waking from sleep & trying to open bluetooth prefs at that point causes the system to lock up. Have to hold down power button to reboot)
Oddly I have Leopard on my iMac 2.16 Core 2 Duo and have no issues with my Mighty Mouse.
Hopefully someone comes up with an answer .... My Dad is 80 and just bought a new Powerbook and Mighty Mouse. It's hard to explain why the mouse doesn't work.

BROADBAND CONNECTION KEEPS DROPPING WHEN UPLOADING PHOTOS TO MS SKYDRIVE

when i attempt to upload photos to MS skydrive in Firefox, my broadband connection keeps disconnecting and reconnecting all the time. However if I try and upload photos via IE8, i have no such issues.
Any explanations for this bizarre behaviour?
Thanks

Morning
Thanks all so much for the replies :
If you are streaming content then I would recommend using an ethernet connection between your hub and PC as wireless is subject to to many forms of external interference"
Ethernet cable? I am not sure what one is, I think this is how I was connecting when I was with Talk Talk. Is it where you connect to the BT phone socket with a little white box thingy? Please let me know. To be honest, I thought the whole point of the setup I have now was the newest technology which did away with that sort of connection. Can you please let me know how I can try this. With thanks again for YOUR reply.
I think I have latest version of Adobe Flash Player I removed my existing version last week and uploaded newest version. Please tell me which one I should be using. Please also let me know if I need anything other programme that would help.
Keith - I haven't tried an ethernet cable as I've said above.
Please please more help. Would it be possible to speak to one of you guys on the phone OR a TECH person in the UK - I'm sure they could help me with the problem because they could guide me through what I have to do. It must be a UK call centre (please) - I almost go into a nervous breakdown when I have to speak to your help centres in Asia. With very many thanks.

Temporary segment can't be dropped after upgrading from 9.2.0.1 to 9.2.0.8

After upgrading oracle from 9.2.0.1 to 9.2.0.8 ,alert.log show some corrupted block ,dbv also confirm the errors.
alert log:
SMON: enabling tx recovery
Wed Aug 12 21:47:23 2009
Database Characterset is ZHS16GBK
Wed Aug 12 21:47:23 2009
Hex dump of Absolute File 6, Block 11 in trace file d:\oracle\admin\oracle9i\bdump\oracle9i_smon_1100.trc
Corrupt block relative dba: 0x0180000b (file 6, block 11)
Bad header found during buffer read
Data in bad block -
type: 35 format: 2 rdba: 0x0040000b
last change scn: 0x0000.00000000 seq: 0xff flg: 0x04
consistency value in tail: 0x000023ff
check value in block header: 0x551d, computed block checksum: 0x0
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of rdba: 0x0180000b (file 6, block 11) found same corrupted data
Hex dump of Absolute File 6, Block 19 in trace file d:\oracle\admin\oracle9i\bdump\oracle9i_smon_1100.trc
Corrupt block relative dba: 0x01800013 (file 6, block 19)
Bad header found during buffer read
Data in bad block -
type: 35 format: 2 rdba: 0x00400013
last change scn: 0x0000.00000000 seq: 0xff flg: 0x04
consistency value in tail: 0x000023ff
check value in block header: 0x21f2, computed block checksum: 0x0
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of rdba: 0x01800013 (file 6, block 19) found same corrupted data
Hex dump of Absolute File 6, Block 195 in trace file d:\oracle\admin\oracle9i\bdump\oracle9i_smon_1100.trc
Corrupt block relative dba: 0x018000c3 (file 6, block 195)
Bad header found during buffer read
Data in bad block -
type: 0 format: 2 rdba: 0x004000c3
last change scn: 0x0000.00000000 seq: 0xff flg: 0x04
consistency value in tail: 0x000000ff
check value in block header: 0x683, computed block checksum: 0x0
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of rdba: 0x018000c3 (file 6, block 195) found same corrupted data
Wed Aug 12 21:47:24 2009
replication_dependency_tracking turned off (no async multimaster replication found)
Completed: ALTER DATABASE OPEN
SYS@oracle9i>col segment_name for a20
SYS@oracle9i>col segment_type for a20
SYS@oracle9i>select segment_name,segment_type from dba_segments where header_file=6 and header_block
=11;
SEGMENT_NAME         SEGMENT_TYPE
6.11                 TEMPORARY
SYS@oracle9i>select segment_name,segment_type from dba_segments where header_file=6 and header_block
=19;
SEGMENT_NAME         SEGMENT_TYPE
6.19                 TEMPORARY
SYS@oracle9i>select segment_name,segment_type from dba_segments where header_file=6 and header_block
=195;
SEGMENT_NAME         SEGMENT_TYPE
6.195                TEMPORARY
smon can't clean the temporary segment,so I set event drop_segments ,but it also don't take effect

You could run dbms_repair to mark those blocks as corrupted.
You should
a. take the tablespace offline
b. run dbv a few times to confirm that it is always the same blocks and only these blocks in temporary segments that appear to be corrupted
c. use dbms_repair to mark the corrupted blocks
However, if it is always a segment header block that appears to be corrupted, it is suspicous behavioiur.
Also, SMON is failing on the corrupted blocks which are segment headers -- had the corrupted blocks not been segment headers then SMON would not have even been reading all the blocks. It only reads the header blocks (segment/extent) to free the extents.
But you should first go through your alert.log to find out when and, possiby why, those blocks are corrupt.

Broadband signal keeps dropping after upgrade

Similar Messages

Maybe you are looking for