Broadband slow speed,ongoing since end of april

Hi,i have been suffering slow speeds and dropping out since end of april,i have had 9 engineers out,but still no wiser.
I use a desk top and laptop and have problems on both,running at 8 meg,cant open web pages,or do internet shopping,engineer blames the websites.
i am a 2 min walk from the exchange,
if i take my laptop to my sisters 4 miles away it works fine,and shes only on 2 meg.
I had an it consultant round who did a ping test from laptop to router,and router to exchange,laptop to router was fine,but the router to exchange keeps timing out 19 times in 5 mins,where as my sisters did it once in 40 mins.
i have opened a little square bt box from my socket box to the wiring outside,wiring looks in poor condition with wires not actually connected to anything,engineers say that wouldnt affect it,

Hi Efcpaul
I can take a look at this for you.
Send an email to [email protected] with your BT account number, telephone number and a link to this thread.
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Similar Messages

  • Upgraded to Mavericks and now computer is extremely slow especially on the internet yet internet company assures me my speed on there end is GREAT??

    I have since done a Mavericks upgrade and our computer is rediculously SLOW! i have made sure the Trash is empty...moved photos to another Library so they are not all accessed from the dock..just keep noticing that when im on the computer or on the interenet nothing but that silly BEACHBALL all the time...just keep think what is it doing?? and why is it everytime im on this thing does that ball follow me and hold every page up?? SO ANNOYING! 
    Any help or advice is much appreciated
    Smith

    Not enough free space on the startup disk can slow your Mac down.
    Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
    Make sure there's at least 15% free disk space.
    If there's enough free disk space, the startup disk may need repairing.
    Launch Disk Utility located in HD > Applications > Utillities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk  (not Verify Disk Permissions)
    If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.
    Make sure to back up all important files first before using OS X Recovery.
    OS X Recovery does require a broadband high speed internet connection.

  • Extremely slow speed for around 2 months (since up...

    Hi,
    We've been dealing with a ridiculously slow broadband speed ever since BT informed us they were doing an upgrade. It has got continually worse and drops out throughout the day. It was never the speed it should have been anyway, but it was more reliable.
    ADSL line status
    Connection information
    Line state
    Connected
    Connection time
    0 days, 8:08:39
    Downstream
    283 Kbps
    Upstream
    888 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.3
    Latency type
    Interleaved
    Noise margin (Down/Up)
    15.4 dB / 11.4 dB
    Line attenuation (Down/Up)
    36.5 dB / 20.9 dB
    Output power (Down/Up)
    0.0 dBm / 13.0 dBm
    Any help would be much appreciated, we've tried ringing but it's never been any help.

    Sorry didn't realise there were more:
    ADSL line status
    Connection information
    Line state
    Connected
    Connection time
    0 days, 8:19:00
    Downstream
    283 Kbps
    Upstream
    888 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.3
    Latency type
    Interleaved
    Noise margin (Down/Up)
    15.5 dB / 11.5 dB
    Line attenuation (Down/Up)
    36.5 dB / 20.9 dB
    Output power (Down/Up)
    0.0 dBm / 13.0 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    142905360 / 4294967264
    CRC Errors (Down/Up)
    824 / N/A
    HEC Errors (Down/Up)
    N/A / 0
    Error Seconds (Local)
    1
    We are connected to the master socket, we don't have others. I've tried the test, just sounded crackly to me!

  • Slow Broadband Connection Speed

    Hi,
    I was wondering if anyone could offer some advice please.  Thanks.
    I have a BT Home Hub 2. I have had it for about 4 years. I have generally always received a very good stable broadband with speeds that are acceptable for my use. 
    About 5 weeks I started to have problems with the broadband connection dropping out several times a day and then the wifi signal being intermittent.  I put up with it for a while but then decided to contact Customer Services.
    After several phone calls to Customer Services I had replaced all filters and wiring and plugged my router directly into the Exchange socket in the wall. None of this made the slightest bit of difference.
    Finally, about two weeks ago, I was asked to replace the router with another one which I did.  This made an immediate improvement. I was told that it would then take about 10 days for my line to stabilise but I should see a gradual improvement in the speed over that time.
    Since then the speed has actually gradually deteriorated and for the last couple of days it has been running at 0.6mbps (the slowest it’s run since the problems first started).
    I’ve spoken again to the Customer Services who say that this is part of the stabilisation process and to be patient for a few more days and it will improve.
    I’m not an expert but is the guidance I am being giving correct or am I being giving the round around? It just seems odd that the connection is getting worse not better.  Am I perhaps just being too impatient and will it start to get better?
    I’d appreciate any advice please.
    Thanks.

    Hi,
    Thanks very much for the quick reponse.  Thats much appreciated.
    I think these areb the figures that you have asked for
    ADSL line status
    Connection information
    Line state
    Connected
    Connection time
    0 days, 18:49:38
    Downstream
    572 Kbps
    Upstream
    747 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.3
    Latency type
    Interleaved
    Noise margin (Down/Up)
    7.3 dB / 5.3 dB
    Line attenuation (Down/Up)
    56.5 dB / 33.6 dB
    Output power (Down/Up)
    0.0 dBm / 13.0 dBm
    Loss of Framing (Local)
    17
    Loss of Signal (Local)
    198
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    2282309 / 4294967243
    CRC Errors (Down/Up)
    1523 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    1051
    FAQ
    <script type="text/javascript">// paintProgressAndMessageOnBar(100,"The test has successfully completed" ); // </script>
      1. Best Effort Test:      -provides   background information.
               Download Speed         
               449 Kbps      
             0 Kbps          500 Kbps
        Max Achievable Speed      
             Download speed          achieved     during the test was - 449 Kbps
        For your connection, the acceptable range of speeds              is 100 Kbps-500 Kbps.
        IP Profile for your line is - 504 Kbps      
      2. Upstream Test:      -provides   background information.
               Upload Speed         
               891 Kbps      
             0 Kbps          832 Kbps
        Max Achievable Speed      
             Upload speed              achieved during the test was - 891Kbps
        Additional Information:
        Upstream Rate IP profile on your line is - 832 Kbps      

  • Slow speeds. Apparently I don't have a bt broadban...

    After using bt's own e-form to email them about my long running loss of speed over the year from 2.6mb for the last say 10 years, to 1.6mb (1.4mb at its lowest) download / 0.36 up. ping latency around 0.38 i think, apart from today where its 42.25!! what's that?!
    All I've got back so far is:
    "Recently you requested personal assistance from our on-line support centre. Below is a summary of your request and our response.
    If this issue is not resolved to your satisfaction, you may reopen it within the next 14 days.
    Thank you for allowing us to be of service to you. " ....and....
    "This is in regards to the e-mail you have send on 20th August 2014. We are sorry to inform you that there is no sufficient information in the e-mail to pull up any active broadband account. We would request you to provide the details of your broadband account so that we can pull up the account and help you further."
    Just to be clear, their OWN e-form didn't have enough information for them to find my account??? It asks for my name, address, phone number my broadband is on, email address, my account number (assume its the BT account as that's all I have), plus the problem. What else can I type in if there's no other fields.
    So I submitted the form. A couple of days later I got an email back with the above included in it.
    1. Why automatically close the call? They hadn't resolved anything, so why close it? The only other thing they mentioned was going onto their Help pages (durr how did i manage to use their e-form in the first place?).
    2. No mention of what these missing "details" are. (On purpose?)
    So I replied and being a little annoyed at their poor response,  which just sounds like "yep dealt with that call within the response time target I got to make". 
    I've had BT broadband since its inception, even before, but they cannot find my account? Amazing they can bill me each quarter without any problems. So I sent my bt account number again even thought it was included in the e-form. Asked them clearly to tell me what "details" of my broadband account they need from me. More than happy to oblige. Oh, and no I'm not satisfied with their resolution and re-open the call!!
    So some more days have now passed and guess what. I get an email with the exact same text!!
    I replied. In CAPITAL LETTERS for the hard of hearing. What specific details do you want from me?
    I wait in baited breath.
    OMG I haven't even got onto the problem of the slow speed issue yet!
    I guess they want me to phone (premium 0800 number?), or do something myself. I don't want to phone them as I've experienced the same ol' routine before, life's too short. I've paid the top price for ever, so I would think they could do some of the leg work eh? I mean part of the cost is the support they provide, right? How do you lose a broadband account? 
    It niggles me is that I pay same price infinity customers do and I'm still stuck in the dial-up speed ages. And don't get me on about those tv ads. Like everyone can get infinity. Yeah I'm still waiting after 5 years that it was coming. Amazing the Isles of Scilly with about 10 people living on there manage to get it quicker than me living in a town in the middle of the UK. I digress...
    If I can do a speed test from both their bt.com site and btwholesale speed test and get a poor speed (approx 1.8 max) from exchange to router then I know by the time it gets to my pc its not going to be 2.6 is it.
    PS i don't have a master socket/test socket to try. its the old type. And why has the speed just dropped and kept down (like for so many others in this forum), where nothing has changed, at least at the customers end of the line.
    I don't expect someone in the forum to come up with the solution, but its more of a rant on my part at the poor response to my request, let alone some kind of investigation into the problem itself.
    I work in "IT" and part of it is dealing with calls from customers. If I had dealt with a call like BT had then I'd be getting a ear bashing from my manager.
    Solved!
    Go to Solution.

    if you want help about your conenction speed from the forum members then can you post the adsl stats from your router please.  
    can you try quiet line test  dial 17070 option 2  should be quiet nohiss/crackle and best with corded phone   if cordless then dull hum normal
    can you enter your phone number and post results  remember to delete number https://www.btwholesale.com/includes/adsl/main.html
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Very slow speeds and ridiculous email and bill for...

    Hi 
    i have several issues. I have been a very satisfied customer for over 15 years until early summer of this year:
    1. My broadband speeds remain painfully slow despite 3 complaints and investigations. In fact my line is still connected to the test line as I was advised to do and I have never had a call back as promised.
    2. I have now received an email message to say I have used 90gb at a cost of £50. This is almost all uploads. i upload nothing and this figure is impossible. Until June my usage was quite small and I came nowhere near my limit on option 2. Nothing has changed with my usage since then. I do not download or stream films and do not upload large quantities. I probably would stream films, but the slow speed does not allow it.
    3. I spent over an hour on the phone trying to sort this out today, but was not helped by a succession of people who barely understood the situation and had even less understanding of customer service. I have now emailed, but have had a message saying it might be 72 hours before a reply.
    Any advice would be really helpful as I am at my wits end
    Solved!
    Go to Solution.

    Ok....since the original post the problem has continued. I have spent literally hours on the phone to people who say all the same things and never come up with a solution.
    The test results are below. I do not experience speeds as reported. And if I use another tester it correctly comes out as about 1 4 - 1.9. or even lower. The upload usage is still showing as high....but it is just not possible. I have now reset the hub wireless key, but I have not shared this with anyone in range. Apple TV is now disconnected after it was going to take 20 hours to download a film!
    I am at my wits end with this and really do not want the hassle of changing provider but even after 20 years BT broadband I am so very close to that.
    Any ideas would be appreciated.
    Thanks
    Julie
    Home Hub 3
    iMac
    Set up not changed in 5 years. other than new hub about 6 months ago.
    Wired connection to main mac, but also wireless to other devices.
    The BT tester shows 6.09 mbps
     Download speedachieved during the test was - 6.09 Mbps
     For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
     Additional Information:
     Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 7.15 Mbps
    ADSL Line Status
    Connection information
    Top of Form
    Line state:
    Connected
    Connection time:
    0 day, 17:53:05
    Downstream:
    8,128 Kbps
    Upstream:
    448 Kbps
      ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    14.4 dB / 23.0 dB
    Line attenuation (Down/Up):
    6.5 dB / 5.0 dB
    Output power (Down/Up):
    15.8 dBm / 11.9 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    1 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    0 / 0
    Error Seconds (Local/Remote):
    0 / 0

  • Slow speeds/disconnections in Coventry area (02476...

    For past 4 days I've been getting slow speeds and disconnections.
    Phoned support got through to India (waste of time), and was told to ring back tomorrow because they had so many problems.
    Anyone else in Coventry area having probs?
    Luckily I am nearing the end of my contract so I think I will be off soon.
    cheers,
    Robin

    Yes still have disconnection problems although not as bad now.
    The last time I got disconnected the hub was showing a steady orange b.
    I have had broadband since early days so I have the filtered face plate.
    An engineer has been out to rewire the main phone socket and fit a new filtered face plate.
    He tested the line and didnt find any faults with it.
    I have had two disconnections since then.
    I called India who gave me the number of the network support team and a pin number.
    I havent rung yet because the connection is working.
    My neighbour who is with a different ISP is having similar problems so I dont know if there is a problem at the exchange.
    We are both on the Binley exchange.
    Thanks for any help you can provide.

  • Very Slow Speed & BT seem unable to fix

    Hi All,
    First time post and would very much welcome anyone’s view on my problem.
    Apologies if it’s a bit long!
    The problem: Very slow download speed, going as low as 50kbs. Prior to this issue my download speed was around 4.5Mb but since this issue started it has reduced to around 1Mb first thing in the morning which decreases as the day goes on.
    The results of a previous BT speedtest were Download Speed 190Kb / DSL connection rate 6.62 Mb (Downstream) / 448Kb (Upstream) IP Profile for line 5Mb
    (All tests were carried out using a single Windows 7 desktop pc with a wired connection to a home hub 2)
    6 Feb – Contacted BT to advise of speed problem and was informed that they would need to run a test which would take 48 hours.
    8 Feb – Contacted BT to be advised it could be a problem with the home hub or network not passing signal. Further line test carried out and was told that it is not a fault within my property. They would pass problem to Network Faults Dept so they could reconfigure the line and they would call me 9 Feb.
    9 Feb – BT Called and following a search on this site I mentioned that the noise margin seemed high (13.3dB/26.0dB)  He said it should be 6dB and put in a request for it to be lowered and was told the speed should increase by 11 Feb. (Noise margin was under 6dB by the next day)
    10 Feb – BT (Level 2 Help) called to advise the broadband connection is in the stabilisation phase.
    11 Feb – Called BT to advise no change in speed. They run test and now say fault is inside the house and an engineer would be required. Oh and it would be a chargeable visit. I queried this as the advisor I spoke to 8 Feb said it was not a problem inside the house but his response was that it was originally a network fault, which was fixed, but now it is a problem inside the house. Sounds Fishy!
    Call was transferred to the department that arrange engineers and to cut a long story short it was agreed that it would not be chargeable visit.
    13 Feb – BT called to advise an engineer visit 14 Feb
    14 Feb – Openreach engineer tested wiring and all was OK. Just to be double sure he replaced the master socket to a 2 port type (hub in top port and telephone in bottom) and was told this type does not require a DSL filter. He also changed the Home Hub 2 to a Home Hub 3 and after still no improvement he concluded BT were throttling my broadband. I’m not sure if he reset my profile but said it should start to improve over the next couple of days.
    16 Feb – Still no improvement so I called BT again. They wanted to test the line again and it apparently came back with a network fault and it would take another 48 hours. I then asked to speak to a Manager who reviewed my problem history and transferred me to someone in the Network Department. She did a bit of tinkering and the speed went from 200kb to 400kb, then another bit of tinkering and it went to 550kb. At last, i thought, we were making slow progress but since this call, the speed has decreased again to 130kb. She said that I have to wait another 4 days for it to possibly improve and will call me 21 Feb. They keep telling me I have to wait 48 hours here, 3 days there but unfortunately I now have little faith that there will be any improvements in 4 days time. Is this acceptable or am I being too impatient.
    This is the latest ADSL line status:
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    2 days, 05:23:05
    Downstream:
    6.469 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    5.6 dB / 23.0 dB
    Line attenuation (Down/Up):
    40.5 dB / 23.5 dB
    Output power (Down/Up):
    20.2 dBm / 12.4 dBm
    FEC Events (Down/Up):
    0 / 2
    CRC Events (Down/Up):
    2423 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    9705 / 2
    Error Seconds (Local/Remote):
    1920 / 3

    Cable connection to Hub
    1. Best Effort Test: -provides background information.
    Download  Speed
    127 Kbps
    0 Kbps
    7.15 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 127 Kbps
     For your connection, the acceptable range of speeds is 600 Kbps-7.15 Mbps.
     Additional Information:
     Your DSL Connection Rate :6.62 Mbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 5 Mbps
    This test was not conclusive and further testing is required.This might be useful for your Broadband Service Provider to investigate the fault.
    If you wish to carry out further tests,please click on 'Continue' button.If not, please close the window using 'Exit' button and contact your ISP for further assistance with these results.

  • Slow speed/high SNR margin after upgrade to ADSL2+...

    I have an issue with slow speed that I am suspecting is caused by a high SNR margin (about 12dB) which has come about (I believe) due to the fact that my router was repeatedly reset during the first few days of the upgraded service. The exchange was upgraded to ADSL2+ on 3rd January.
    I have a US Robotics 9108 which has worked fine for nearly six years. I was getting around 8Mbps before the upgrade which isn't far off the theoretical maximum.
    There was a problem with my router and I only found it to be my router at fault over the last few days. Upgrading its firmware has cured the problem which was that requests weren't being fulfilled once connection had been established, (seemingly particularly when this was ADSL2+ or ADSL2 mode). Consequently, I reset my router in these instances and I believe that this will have been interpretted by the exchange as being due to line noise. In general, I disabled ADSL2 and 2+ modes on my router to force it back to G.DMT and it usually worked fine (albeit slow sync rate relative to that I had before 3rd January).
    During fault conditions, the connection synced OK. I recently borrowed a router and tried it and it immediately connected faster than mine had done previously and I could access the web without issue. This confirmed that my US Robotics was at fault, and after downloading its latest firmware, it fixed the problem.
    There is no bell wire as there are no hard wired extensions from the master socket. I use a single filter which plugs directly into the master socket (i.e. no extension lead to the filter).
    I was using a BT filter (MF50) I got in 2004 when I first got broadband. This came with a Voyager 100 modem and is a rebranded YCL one. I have since replaced this with a Z350-UK which I have borrowed. The US Robotics didn't come with any filters.
    With the BT filter, caller display does not work at all when the router is connected in ADSL2 mode. In G.DMT mode the problem with caller display was intermittent. The Z350-UK has rectified the problem with caller display not working when in ADSL2 mode. I have ordered a Pressac Interstitial VDSL Faceplate as a perminant solution.
    Do I need to contact the support helpline to get this fixed? Or will the SNR margin drop over time? As I say, I got around 8Mbps before the upgrade.
    I am presently connected in 2+ mode and stats are:
    SNR margin (dB):
    12.8 
    5.4 
    Attenuation (dB):
    34.0 
    12.0 
    Output power (dBm):
    0.0 
    12.8 
    Attainable rate (Kbps):
    8984 
    1144 
    Rate (Kbps):
    6495 
    1144 
    I have just run the BT Speed Test and the results are:
    Test1 comprises of two tests
    1. Best Effort Test: -provides background information.
    Download  Speed
    5282 Kbps
    0 Kbps
    7150 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 5282 Kbps
     For your connection, the acceptable range of speeds is 2000-7150 Kbps.
     Additional Information:
     Your DSL Connection Rate :6495 Kbps(DOWN-STREAM), 1144 Kbps(UP-STREAM)
     IP Profile for your line is - 5730 Kbps
    2. Upstream Test: -provides background information.
    Upload Speed
    938 Kbps
    0 Kbps
    1144 Kbps
    Max Achievable Speed
    >Upload speed achieved during the test was - 938 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 1144 Kbps
    We were unable to identify any performance problem with your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
    If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.

    once you have maintained 3 days + stable connection then you can contact the forum mods on this link and request a noise margin reset http://bt.custhelp.com/app/contact_email/c/4951
    they normally reply by email or phone directly to you within 72 hours
    you do not need to contact the helpline
    They are a UK based BT specialist team who have a good record at getting problems solved
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • MacBook Pro(Early 2011) extremely slow speed on Yosemite(10.10.2)

    Hi All,
    I installed and then reinstalled a fresh Yosemite But now i am experiencing issues like very slow speed of the OS & fan continuously ON. Mavericks was working fine.
    this is my ertecheck report
    EtreCheck version: 2.1.8 (121)
    Report generated 1 April 2015 12:03:11 am IST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.7 GHz Intel Core i7 CPU: 2-core
        10 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Replace Soon - Cycle count 1329
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 4:1:57
    Disk Information: ℹ️
        Hitachi HTS545050B9A302 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            MacHDD_2 (disk0s4) /Volumes/MacHDD_2 : 349.63 GB (118.65 GB free)
            MacHDD_1 (disk1) / : 149.11 GB (104.40 GB free)
                Core Storage: disk0s2 149.48 GB Online
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Daemons: ℹ️
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    3rd Party Preference Panes: ℹ️
        None
    Time Machine: ℹ️
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            MacHDD_1: Disk size: 149.11 GB Disk used: 44.71 GB
        Destinations:
            MacHDD_2 [Local]
            Total size: 349.63 GB
            Total number of backups: 0
            Oldest backup: -
            Last backup: -
            Size of backup disk: Adequate
                Backup size 349.63 GB > (Disk used 44.71 GB X 3)
    Top Processes by CPU: ℹ️
            26%    Microsoft Outlook
            12%    coreaudiod
             6%    Google Chrome
             3%    WindowServer
             1%    launchservicesd
    Top Processes by Memory: ℹ️
        215 MB    mds_stores
        193 MB    Google Chrome
        183 MB    Google Chrome Helper
        129 MB    iTunes
        107 MB    Microsoft Outlook
    Virtual Memory Information: ℹ️
        5.04 GB    Free RAM
        3.41 GB    Active RAM
        698 MB    Inactive RAM
        1.59 GB    Wired RAM
        4.71 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 31, 2015, 07:59:25 PM    Self test - passed

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Bt infinity 2 slow speeds and disconnection

    hi all hi all after having spent over two hours on the phone with BT being passed from post to post from billing to technical support back to billing people slamming phones down on me and no  help what so ever today 22/05/2014 have been with bt over 5 years phone  line the broadband and all services 
    it a joke now 
    2012 I have had fibre optic broadband service with BT and all was ok till November 2013 when start have slow speeds and in January year 2014 started having disconnections reconnection connections form 5 mins to to 60mnis or sum times 2mins  of the broadbands and the connections sometimes 3 to 4  times a day disconnections and so on .... when was supposed to be fixed the upload speed was very slow and the download speed was okay when I first started with BT with the fibre-optic broadband two years ago nearly I was averaging about 42 meg per day and average speed of upload was 6.5 Mag
    but now 32.meg dowm /up is 3.5 Rwent off in February he did a shift in lift because the broadband was 42 meg download bought lacked upload speed of less than half meg for the day of the lift it ran at 52 meg  with an average upload speed of about seven meg from around February till the end of February then stat act erratically reboot the bt hub 4 rebooting all time DSL light off on the main openreach modem in one day was off and on 36 times 
    had  engineers visit last week 14th of May to test line all was ok with line but i had now found out that bt they'll are now only selling me option one broadband fibre-optic even though I am paying for option two they now states that the speed on my line will never go above 36 meg so why am I paying for option 2 fibre-optici be through to the billing department today said yes you are an option 2 but  the technical department to say my line will only support 36 meg and I did find out from the engineer that I am on option one and only for the supply of the broadband line but have been pay for BT infinity option2
    I think this is just an easy way for BT to get out of fixing the mind correctly by downgrading the line but wanting the customer to carry on paying for option to have tried with billing to sort this problem out today they just said you need to speak to technical support technical support what support manages to say you need to speak to billing one of them even slammed the phone on me 
    No customer support spent over two hours on the phone today and got nowhere and one department saying we can downgrade you to option one broadband but it will cost you £30 to do so 
    who i speak to if billing are no help at all ??????

    BT BROADBAND AVAILABILITY CHECKER
    Telephone Number 01704 on Exchange CHURCHTOWN is served by Cabinet 6 
    Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date  High Low High Low    
    FTTC Range A (Clean)
    41
    32.3
    8.3
    6.3
    Available
    FTTC Range B (Impacted)
    35.2
    19.3
    8.3
    5
    Available
    WBC ADSL 2+
    Up to 15
    8.5 to 19
    Available
    WBC ADSL 2+ Annex M
    Up to 15
    Up to 1.5
    8.5 to 19
    Available
    ADSL Max
    Up to 7
    6 to 8
    Available
    WBC Fixed Rate
    2
    Available
    Fixed Rate
    2
    Available
    Other Offerings
    Fibre Multicast
    Available
    Copper Multicast
    Available
    For all ADSL and WBC Fibre to the Cabinet (FTTC) services, the stable line rate will be determined during the first 10 days of service usage.
    For FTTC Ranges A and B, the term "Clean" relates to a line which is free from any wiring issues (e.g. Bridge Taps) and/or Copper line conditions, and the term "Impacted" relates to a line which may have wiring issues (e.g. Bridge Taps) and/or Copper line conditions.
    Throughput/download speeds will be less than line rates and can be affected by a number of factors within and external to BT's network, Communication Providers' networks and within customer premises.
    The Stop Sale date for Datastream is from 30-Jun-2012; the Formal Retirement date for Datastream is from 30-Jun-2014. The Stop Sale date for IPstream is from 31-Dec-2012; the Formal Retirement date for IPstream is from 30-Jun-2014.
    If the End User wishes to migrate from their current Broad

  • Slow Speed Also

    Hi,
    Please help slow speeds since Monday, evening posting here I keep getting timeout message.
    Anyway the helping are looking into it, they were meant to call back between 12 noon and PM today and it's now 1.40pm, so wait and see.
    My line is plugged into the test line, having trouble getting a speed test done, but managed to get this info to.
    Download speed
    1.16 MB/s
    Upload Speed
    0.538 MB/s
    Please help.

    Hello,
    Here are the results I got before it timed out
    FAQ
    1. Best Effort Test: -provides background information.
    Download  Speed
    0.05 Mbps
    0 Mbps
    7.15 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 0.05 Mbps
     For your connection, the acceptable range of speeds is 2 Mbps-7.15 Mbps.
     IP Profile for your line is - 5.87 Mbps
    2. Upstream Test: -provides background information.
    Upload Speed
    0.94 Mbps
    0 Mbps
    0.83 Mbps
    Max Achievable Speed
    Upload speed achieved during the test was - 0.94Mbps
     Additional Information:
     Upstream Rate IP profile on your line is - 0.83 Mbps
    This test was not conclusive and further testing is required.This might be useful for your Broadband Service Provider to investigate the fault.If you wish to carry out further tests,please click on 'Continue' button.If not, please close the window using 'Exit' button and contact your ISP for further assistance with these results.
    Please visit FAQ section if you are unable To understand the test results.

  • Reset hub and now getting extremely slow speeds...

    Hi there,
    So I have had bt broadband for 3 months and had nothing but problems. The speed is very slow, though I do live in a rural area so somewhat to be expected. However in the evenings I have noticed I can get extremely high pings (1000+) and slow speeds (below 0.5 mbps).
    Recently however my usual daytime speeds of around 1.2 mbps shot up to around 3 mbps, which to me is quite high! (compared to what I have been getting).
    Though it dropped off a bit over the past few days (to around 2.2 mbps) it was still working ok, until last night when I reset my homehub as my sister was unable to connect to it at all.
    Since then I have had nearly none existant speeds. Even getting on here was a mission. I am getting speeds of around 0.10 mbps, though my ping seems to vary wildly from around 50 all the way back up to silly numbers.
    I attempted to use the bt speed test, but it told me it couldn't get a reading cos my line was too slow!
    I did however get one eventually from BT wholesale as below. (it won't let me copy it in?...)
    Download speed (mbps): 0.14
    Upload speed (mbps): 0.35
    Ping Latency (ms): 69.63
    Speedtest.net give the following
    Really getting fed up with the unreliable and slow connection. When added to the problems getting a line installed in the first place (it took 3 months!) and problems I have had in the past, I am seriously looking to see what other options I have, but there aren't many good providers that will set us up out here
    Can anyone help me get a stable, reasonably fast connection?
    Thanks,
    Richard

    Hi,
    Here are the adsl stats
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 01:19:52
    Downstream:
    512 Kbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    38.7 dB / 17.0 dB
    Line attenuation (Down/Up):
    14.4 dB / 8.0 dB
    Output power (Down/Up):
    17.6 dBm / 12.3 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    1 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    0 / 0
    Error Seconds (Local/Remote):
    1 / 0
    I currently have the hub connected to the master socket via a filter. I have tried on the main socket and master socket with two different filters and nothing changed...
    As for the btspeedtester, I was unable to successfully run that...It just says my connection may be too slow (no kidding!)
    Finally, regarding the quiet line test...I don't actually have a phone at the moment. I only wanted broadband as I rarely make phone calls from the house and use my mobile. I am looking to get one for the sole purpose of fixing this issue (and ringing bt to have a whinge at them)
    Thanks,
    Richard

  • Very slow network throughput since 2-3 days ago

    I've been having very slow network throughput since 2-3 days ago, with no apparent reason.
    I see (from what I can tell) no relevant package updates during that period.
    Connections are nfs v3 shares, over UTP cat5e gigabit ethernet.
    I've been running this setup for many years now, without such issues.
    But now, it's as if throughput is capped around 100Mbps.
    Is there a way to see - if for some reason - a network adapter has locked to 100Mbps, instead of 1Gbps?
    ifconfig does not say anything.
    PS: netstat -i does not report any errors over the connection.
    Last edited by wantilles (2011-04-12 15:25:52)

    experiencing the same issue with my wlan0 since update to kernel2.6.38 yesterday night.
    Speed tests grant me a download speed of around 50kbps. Should be around some mbit though! How do I find out, why it's acting so slow?
    edit: switched to win7 for the moment. Everything is speedy and normal around here. Something is seriously broken in my arch box!
    Can this be related to xorg-server1.10.902 or kernel2.6.38? It would also explain the strange issues with pacman lately (like this https://bbs.archlinux.org/viewtopic.php?id=116429 or this https://bbs.archlinux.org/viewtopic.php?id=116696).
    More people seem to experience the network issue: https://bbs.archlinux.org/viewtopic.php?id=116738
    Any insights?
    edit#2: Just got back from win7. Upload speed in Arch is quite okay. Download speed is extremely fucked though. I wonder why? At least now I know why pacman has problems getting package upgrades, etc.
    How do I fix a problem with the wlan0 connection? Haven't had any of those before with gnome and Networkmanager. I'm using the ath9k module.
    My rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    HARDWARECLOCK="localtime"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Berlin"
    KEYMAP="de"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    MODULES=(ath9k snd_hda_intel snd_hda_codec snd_hda_codec_idt snd_hwdep snd_pcm snd_seq snd_seq_device snd_timer fuse nvidia loop vboxdrv !vboxnetflt !vboxnetadp !vboxguest !vboxsf vboxvideo acpi_cpufreq cpufreq_powersave cpufreq_ondemand !snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp wacom)
    #MODULES=(!snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp !vboxnetflt !vboxnetadp !vboxguest !vboxsf)
    #MODULES=()
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="davelab"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    # vboxnetflt
    eth0="eth0 192.168.0.6 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(!eth0 !wlan0 !lo)
    #WIRELESS_INTERFACE="wlan0"
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng laptop-mode cpufreq dbus !hal networkmanager !fam !avahi-daemon samba !smbnetfs cups !webmin alsa !mpd crond bluetooth xinetd sensors clamav ntpd !privoxy !tor httpd !tomcat7 mysqld !iptables)
    dmesg output:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 (GCC) ) #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011
    Command line: root=/dev/sda3 ro resume=/dev/sda3 5
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000008fec0000 (usable)
    BIOS-e820: 000000008fec0000 - 000000008fecf000 (ACPI data)
    BIOS-e820: 000000008fecf000 - 000000008fee5000 (ACPI NVS)
    BIOS-e820: 000000008fee5000 - 00000000a0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000160000000 (usable)
    NX (Execute Disable) protection: active
    DMI present.
    DMI: Dell Inc. Studio XPS 1340/ , BIOS A14 03/25/2010
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x160000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-C7FFF write-protect
    C8000-DBFFF uncachable
    DC000-EFFFF write-through
    F0000-FFFFF write-back
    MTRR variable ranges enabled:
    0 base 0A0000000 mask FE0000000 uncachable
    1 base 0C0000000 mask FC0000000 uncachable
    2 base 000000000 mask F00000000 write-back
    3 base 100000000 mask FC0000000 write-back
    4 base 140000000 mask FE0000000 write-back
    5 base 09FF00000 mask FFFF00000 uncachable
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0x8fec0 max_arch_pfn = 0x400000000
    found SMP MP-table at [ffff8800000f7b50] f7b50
    initial memory mapped : 0 - 20000000
    init_memory_mapping: 0000000000000000-000000008fec0000
    0000000000 - 008fe00000 page 2M
    008fe00000 - 008fec0000 page 4k
    kernel direct mapping tables up to 8fec0000 @ 8febb000-8fec0000
    init_memory_mapping: 0000000100000000-0000000160000000
    0100000000 - 0160000000 page 2M
    kernel direct mapping tables up to 160000000 @ 15fff9000-160000000
    RAMDISK: 37e56000 - 37ff0000
    ACPI: RSDP 00000000000f7b20 00024 (v02 PTLTD )
    ACPI: XSDT 000000008fec37f6 000A4 (v01 DELL QA09 06040000 LTP 00000000)
    ACPI: FACP 000000008fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
    ACPI: DSDT 000000008fec5388 09808 (v01 NVIDIA MCP79 06040000 MSFT 03000001)
    ACPI: FACS 000000008fee4fc0 00040
    ACPI: MCFG 000000008fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    ACPI: HPET 000000008feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
    ACPI: APIC 000000008feced6c 00072 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    ACPI: BOOT 000000008fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: SLIC 000000008fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000)
    ACPI: OSFR 000000008fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061)
    ACPI: SSDT 000000008fec5129 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec5083 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4fdd 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4f37 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4e91 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4deb 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4d45 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4c9f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec389a 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
    ACPI: Local APIC address 0xfee00000
    No NUMA configuration found
    Faking a node at 0000000000000000-0000000160000000
    Initmem setup node 0 0000000000000000-0000000160000000
    NODE_DATA [000000015fffb000 - 000000015fffffff]
    [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015c200000-ffff88015f7fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00160000
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0008fec0
    0: 0x00100000 -> 0x00160000
    On node 0 totalpages: 982605
    DMA zone: 56 pages used for memmap
    DMA zone: 6 pages reserved
    DMA zone: 3919 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 571128 pages, LIFO batch:31
    Normal zone: 5376 pages used for memmap
    Normal zone: 387840 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x10dea301 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 40
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    PM: Registered nosave memory: 000000008fec0000 - 000000008fecf000
    PM: Registered nosave memory: 000000008fecf000 - 000000008fee5000
    PM: Registered nosave memory: 000000008fee5000 - 00000000a0000000
    PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
    PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
    Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff88008fc00000 s82176 r8192 d24320 u1048576
    pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 962887
    Policy zone: Normal
    Kernel command line: root=/dev/sda3 ro resume=/dev/sda3 5
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 3798920k/5767168k available (3795k kernel code, 1836748k absent, 131500k reserved, 2307k data, 556k init)
    SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Preemptable hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:2304
    Extended CMOS year: 2000
    spurious 8259A interrupt: IRQ7.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 39321600 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 2400.376 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4802.78 BogoMIPS (lpj=8001253)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    AppArmor: AppArmor disabled by boot time parameter
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring handled by SMI
    using mwait in idle threads.
    ACPI: Core revision 20110112
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1 Ok.
    CPU1: Thermal monitoring handled by SMI
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (9604.67 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: SSDT 000000008fee1086 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
    ACPI: SSDT 000000008fee1648 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
    ACPI: SSDT 000000008fee0ed6 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
    ACPI: SSDT 000000008fee15c3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    HEST: Table not found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
    pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
    pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff]
    pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
    pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
    pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
    pci 0000:00:03.0: reg 10: [io 0x1c00-0x1cff]
    pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
    pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
    pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf]
    pci 0000:00:03.2: reg 20: [io 0x3040-0x307f]
    pci 0000:00:03.2: reg 24: [io 0x2000-0x203f]
    pci 0000:00:03.2: PME# supported from D3hot D3cold
    pci 0000:00:03.2: PME# disabled
    pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
    pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
    pci 0000:00:03.5: reg 10: [mem 0xf0600000-0xf067ffff]
    pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
    pci 0000:00:04.0: reg 10: [mem 0xf0886000-0xf0886fff]
    pci 0000:00:04.0: supports D1 D2
    pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
    pci 0000:00:04.1: reg 10: [mem 0xf0889000-0xf08890ff]
    pci 0000:00:04.1: supports D1 D2
    pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.1: PME# disabled
    pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
    pci 0000:00:06.0: reg 10: [mem 0xf0887000-0xf0887fff]
    pci 0000:00:06.0: supports D1 D2
    pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.0: PME# disabled
    pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
    pci 0000:00:06.1: reg 10: [mem 0xf0889400-0xf08894ff]
    pci 0000:00:06.1: supports D1 D2
    pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.1: PME# disabled
    pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
    pci 0000:00:08.0: reg 10: [mem 0xf0880000-0xf0883fff]
    pci 0000:00:08.0: PME# supported from D3hot D3cold
    pci 0000:00:08.0: PME# disabled
    pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
    pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
    pci 0000:00:0a.0: reg 10: [mem 0xf0888000-0xf0888fff]
    pci 0000:00:0a.0: reg 14: [io 0x30d0-0x30d7]
    pci 0000:00:0a.0: reg 18: [mem 0xf0889c00-0xf0889cff]
    pci 0000:00:0a.0: reg 1c: [mem 0xf0889800-0xf088980f]
    pci 0000:00:0a.0: supports D1 D2
    pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0a.0: PME# disabled
    pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106
    pci 0000:00:0b.0: reg 10: [io 0x30e8-0x30ef]
    pci 0000:00:0b.0: reg 14: [io 0x30dc-0x30df]
    pci 0000:00:0b.0: reg 18: [io 0x30e0-0x30e7]
    pci 0000:00:0b.0: reg 1c: [io 0x30d8-0x30db]
    pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf]
    pci 0000:00:0b.0: reg 24: [mem 0xf0884000-0xf0885fff]
    pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
    pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0c.0: PME# disabled
    pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
    pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.0: PME# disabled
    pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
    pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:15.0: PME# disabled
    pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:16.0: PME# disabled
    pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:17.0: PME# disabled
    pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:18.0: PME# disabled
    pci 0000:01:07.0: [1180:0832] type 0 class 0x000c00
    pci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function)
    pci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller
    pci 0000:01:07.0: reg 10: [mem 0xf0500000-0xf05007ff]
    pci 0000:01:07.0: supports D1 D2
    pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.0: PME# disabled
    pci 0000:01:07.1: [1180:0822] type 0 class 0x000805
    pci 0000:01:07.1: reg 10: [mem 0xf0500800-0xf05008ff]
    pci 0000:01:07.1: supports D1 D2
    pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.1: PME# disabled
    pci 0000:01:07.2: [1180:0592] type 0 class 0x000880
    pci 0000:01:07.2: reg 10: [mem 0xf0501000-0xf05010ff]
    pci 0000:01:07.2: supports D1 D2
    pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.2: PME# disabled
    pci 0000:01:07.3: [1180:0852] type 0 class 0x000880
    pci 0000:01:07.3: reg 10: [mem 0xf0501400-0xf05014ff]
    pci 0000:01:07.3: supports D1 D2
    pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.3: PME# disabled
    pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
    pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
    pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode)
    pci 0000:02:00.0: [10de:06e8] type 0 class 0x000300
    pci 0000:02:00.0: reg 10: [mem 0xae000000-0xaeffffff]
    pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:02:00.0: reg 1c: [mem 0xac000000-0xadffffff 64bit]
    pci 0000:02:00.0: reg 24: [io 0x4000-0x407f]
    pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:00:0c.0: PCI bridge to [bus 02-02]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
    pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:03:00.0: [10de:0866] type 0 class 0x000300
    pci 0000:03:00.0: reg 10: [mem 0xaa000000-0xaaffffff]
    pci 0000:03:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
    pci 0000:03:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit pref]
    pci 0000:03:00.0: reg 24: [io 0x5000-0x507f]
    pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:00:10.0: PCI bridge to [bus 03-03]
    pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
    pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
    pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
    pci 0000:00:15.0: PCI bridge to [bus 04-05]
    pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
    pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
    pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    pci 0000:06:00.0: [168c:002a] type 0 class 0x000280
    pci 0000:06:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
    pci 0000:06:00.0: supports D1
    pci 0000:06:00.0: PME# supported from D0 D1 D3hot
    pci 0000:06:00.0: PME# disabled
    pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    pci 0000:00:16.0: PCI bridge to [bus 06-06]
    pci 0000:00:16.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
    pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:17.0: PCI bridge to [bus 07-07]
    pci 0000:00:17.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:18.0: PCI bridge to [bus 08-08]
    pci 0000:00:18.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
    pci0000:00: Requesting ACPI _OSC control (0x1d)
    ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7
    ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11
    ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10
    vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
    vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009dc00 - 000000000009ffff
    reserve RAM buffer: 000000008fec0000 - 000000008fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
    hpet0: 4 comparators, 64-bit 25.000000 MHz counter
    Switching to clocksource hpet
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: [mem 0xffc00000-0xffffffff]
    pnp 00:00: [mem 0xfec00000-0xfec00fff]
    pnp 00:00: [mem 0xfee00000-0xfeefffff]
    pnp 00:00: [mem 0xfed00000-0xfed00fff]
    system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
    system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
    system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
    system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    pnp 00:01: [bus 00-ff]
    pnp 00:01: [io 0x0cf8-0x0cff]
    pnp 00:01: [io 0x0000-0x0cf7 window]
    pnp 00:01: [io 0x0d00-0xffff window]
    pnp 00:01: [mem 0x000a0000-0x000bffff window]
    pnp 00:01: [mem 0x000c0000-0x000c3fff window]
    pnp 00:01: [mem 0x000c4000-0x000c7fff window]
    pnp 00:01: [mem 0x000c8000-0x000cbfff window]
    pnp 00:01: [mem 0x000cc000-0x000cffff window]
    pnp 00:01: [mem 0x000d0000-0x000d3fff window]
    pnp 00:01: [mem 0x000d4000-0x000d7fff window]
    pnp 00:01: [mem 0x000d8000-0x000dbfff window]
    pnp 00:01: [mem 0x000dc000-0x000dffff window]
    pnp 00:01: [mem 0x000e0000-0x000e3fff window]
    pnp 00:01: [mem 0x000e4000-0x000e7fff window]
    pnp 00:01: [mem 0x000e8000-0x000ebfff window]
    pnp 00:01: [mem 0x000ec000-0x000effff window]
    pnp 00:01: [mem 0x000f0000-0x000fffff window]
    pnp 00:01: [mem 0xa0000000-0xfebfffff window]
    pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    pnp 00:02: [irq 0 disabled]
    pnp 00:02: [irq 8]
    pnp 00:02: [mem 0xfed00000-0xfed003ff]
    pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    pnp 00:03: [mem 0xf0600000-0xf0607fff]
    pnp 00:03: disabling [mem 0xf0600000-0xf0607fff] because it overlaps 0000:00:03.5 BAR 0 [mem 0xf0600000-0xf067ffff]
    system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:04: [io 0x1000-0x107f]
    pnp 00:04: [io 0x1080-0x10ff]
    pnp 00:04: [io 0x1400-0x147f]
    pnp 00:04: [io 0x1480-0x14ff]
    pnp 00:04: [io 0x1800-0x187f]
    pnp 00:04: [io 0x1880-0x18ff]
    system 00:04: [io 0x1000-0x107f] has been reserved
    system 00:04: [io 0x1080-0x10ff] has been reserved
    system 00:04: [io 0x1400-0x147f] has been reserved
    system 00:04: [io 0x1480-0x14ff] has been reserved
    system 00:04: [io 0x1800-0x187f] has been reserved
    system 00:04: [io 0x1880-0x18ff] has been reserved
    system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:05: [io 0x0060]
    pnp 00:05: [io 0x0064]
    pnp 00:05: [irq 1]
    pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
    pnp 00:06: [irq 12]
    pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
    Switched to NOHz mode on CPU #0
    Switched to NOHz mode on CPU #1
    pnp 00:07: [io 0x0010-0x001f]
    pnp 00:07: [io 0x0022-0x003f]
    pnp 00:07: [io 0x0044-0x005f]
    pnp 00:07: [io 0x0072-0x0073]
    pnp 00:07: [io 0x0074-0x007f]
    pnp 00:07: [io 0x0091-0x0093]
    pnp 00:07: [io 0x0097-0x009f]
    pnp 00:07: [io 0x00a2-0x00bf]
    pnp 00:07: [io 0x00e0-0x00ef]
    pnp 00:07: [io 0x04d0-0x04d1]
    pnp 00:07: [io 0x0080]
    pnp 00:07: [io 0x0910-0x0911]
    pnp 00:07: [io 0x0295-0x0296]
    system 00:07: [io 0x04d0-0x04d1] has been reserved
    system 00:07: [io 0x0910-0x0911] has been reserved
    system 00:07: [io 0x0295-0x0296] has been reserved
    system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:08: [io 0x0000-0x0008]
    pnp 00:08: [io 0x000a-0x000f]
    pnp 00:08: [io 0x0081-0x0083]
    pnp 00:08: [io 0x0087]
    pnp 00:08: [io 0x0089-0x008b]
    pnp 00:08: [io 0x008f]
    pnp 00:08: [io 0x00c0-0x00d1]
    pnp 00:08: [io 0x00d4-0x00df]
    pnp 00:08: [dma 4]
    pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
    pnp 00:09: [io 0x0061]
    pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
    pnp 00:0a: [io 0x0070-0x0071]
    pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
    pnp 00:0b: [io 0x00f0-0x00f1]
    pnp 00:0b: [irq 13]
    pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
    pnp 00:0c: [io 0x0300-0x0307]
    pnp 00:0c: [irq 10]
    pnp 00:0c: Plug and Play ACPI device, IDs ITE8708 (active)
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    pci 0000:00:09.0: PCI bridge to [bus 01-01]
    pci 0000:00:09.0: bridge window [io disabled]
    pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
    pci 0000:00:09.0: bridge window [mem pref disabled]
    pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
    pci 0000:00:0c.0: PCI bridge to [bus 02-02]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
    pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:03:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
    pci 0000:00:10.0: PCI bridge to [bus 03-03]
    pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
    pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
    pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
    pci 0000:00:15.0: PCI bridge to [bus 04-05]
    pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
    pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
    pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    pci 0000:00:16.0: PCI bridge to [bus 06-06]
    pci 0000:00:16.0: bridge window [io disabled]
    pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
    pci 0000:00:16.0: bridge window [mem pref disabled]
    pci 0000:00:17.0: PCI bridge to [bus 07-07]
    pci 0000:00:17.0: bridge window [io disabled]
    pci 0000:00:17.0: bridge window [mem disabled]
    pci 0000:00:17.0: bridge window [mem pref disabled]
    pci 0000:00:18.0: PCI bridge to [bus 08-08]
    pci 0000:00:18.0: bridge window [io disabled]
    pci 0000:00:18.0: bridge window [mem disabled]
    pci 0000:00:18.0: bridge window [mem pref disabled]
    pci 0000:00:09.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23
    pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:0c.0: setting latency timer to 64
    pci 0000:00:10.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22
    pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22
    pci 0000:00:15.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21
    pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
    pci 0000:00:16.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20
    pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:17.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19
    pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:18.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
    pci_bus 0000:00: resource 20 [mem 0xa0000000-0xfebfffff]
    pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
    pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
    pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
    pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
    pci_bus 0000:01: resource 10 [mem 0x000cc000-0x000cffff]
    pci_bus 0000:01: resource 11 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:01: resource 12 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:01: resource 13 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:01: resource 14 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:01: resource 15 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:01: resource 16 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:01: resource 17 [mem 0x000e8000-0x000ebfff]
    pci_bus 0000:01: resource 18 [mem 0x000ec000-0x000effff]
    pci_bus 0000:01: resource 19 [mem 0x000f0000-0x000fffff]
    pci_bus 0000:01: resource 20 [mem 0xa0000000-0xfebfffff]
    pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    pci_bus 0000:02: resource 1 [mem 0xac000000-0xaeffffff]
    pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    pci_bus 0000:03: resource 1 [mem 0xaa000000-0xaaffffff]
    pci_bus 0000:03: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref]
    pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
    pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff]
    pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    TCP reno registered
    UDP hash table entries: 2048 (order: 4, 65536 bytes)
    UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    NET: Registered protocol family 1
    pci 0000:03:00.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1640k freed
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff88008bc00000 - ffff88008fc00000
    software IO TLB at phys 0x8bc00000 - 0x8fc00000
    Simple Boot Flag at 0x36 set to 0x1
    audit: initializing netlink socket (disabled)
    type=2000 audit(1302716230.603:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 7422
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    intel_idle: MWAIT substates: 0x3122220
    intel_idle: does not run on family 6 model 23
    ERST: Table is not found!
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Linux agpgart interface v0.103
    i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mousedev: PS/2 mouse device common for all mice
    rtc_cmos 00:0a: RTC can wake from S4
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    PM: Checking hibernation image partition /dev/sda3
    PM: Hibernation image not present or could not be loaded.
    registered taskstats version 1
    rtc_cmos 00:0a: setting system clock to 2011-04-13 17:37:11 UTC (1302716231)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 556k freed
    udev[38]: starting version 166
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:0b.0: version 3.0
    ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
    ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
    ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
    ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
    ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
    ahci 0000:00:0b.0: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 40
    ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 40
    ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 40
    ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 40
    ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 40
    ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 40
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata5: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A106, max UDMA/133
    ata2.00: configured for UDMA/133
    ata1.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133
    ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A106 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    Refined TSC clocksource calibration: 2399.988 MHz.
    Switching to clocksource tsc
    EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    udev[632]: starting version 166
    cfg80211: Calling CRDA to update world regulatory domain
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
    forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
    forcedeth 0000:00:0a.0: setting latency timer to 64
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    ath9k 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
    ath9k 0000:06:00.0: setting latency timer to 64
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:22:19:f7:35:cf
    forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
    i2c i2c-0: nForce2 SMBus adapter at 0x3040
    i2c i2c-1: nForce2 SMBus adapter at 0x2000
    ath: EEPROM regdomain: 0x60
    ath: EEPROM indicates we should expect a direct regpair map
    ath: Country alpha2 being used: 00
    ath: Regpair used: 0x60
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    Registered led device: ath9k-phy0::radio
    Registered led device: ath9k-phy0::assoc
    Registered led device: ath9k-phy0::tx
    Registered led device: ath9k-phy0::rx
    ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900018c0000, irq=21
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    ACPI: Power Button [PWRB]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input3
    ACPI: Sleep Button [SLPB]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    ehci_hcd 0000:00:04.1: debug port 1
    ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:04.1: irq 22, io mem 0xf0889000
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 21
    ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21
    ehci_hcd 0000:00:06.1: setting latency timer to 64
    ehci_hcd 0000:00:06.1: EHCI Host Controller
    ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:06.1: debug port 1
    ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:06.1: irq 21, io mem 0xf0889400
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    ACPI: Power Button [PWRF]
    ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
    HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
    hda_intel: Disable MSI for Nvidia chipset
    HDA Intel 0000:00:08.0: setting latency timer to 64
    [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
    wmi: Mapper loaded
    ACPI: acpi_idle registered with cpuidle
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: EC: GPE storm detected, transactions will use polling mode
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    ACPI: Battery Slot [BAT0] (battery present)
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22)
    ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
    sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
    sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA
    ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
    firewire_ohci 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
    thermal LNXTHERM:00: registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (60 C)
    ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    ACPI: AC Adapter [ADP0] (on-line)
    usb 1-2: new high speed USB device using ehci_hcd and address 3
    input: Dell WMI hotkeys as /devices/virtual/input/input7
    acpi device:0c: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:00/input/input8
    ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
    [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS
    acpi device:14: registered as cooling_device3
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input9
    ACPI: Video Device [Z01I] (multi-head: yes rom: yes post: no)
    usb 2-1: new high speed USB device using ehci_hcd and address 2
    firewire_core: created device fw0: GUID 424fc00010f09890, S400
    firewire_core: phy config: card 0, new root=ffc1, gap_count=5
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    cfg80211: World regulatory domain updated:
    cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    usb 2-3: new high speed USB device using ehci_hcd and address 3
    usb 1-1.1: new low speed USB device using ehci_hcd and address 5
    usb 1-1.2: new full speed USB device using ehci_hcd and address 6
    usb 1-1.4: new high speed USB device using ehci_hcd and address 7
    cdc_wdm 2-1:1.5: cdc-wdm-176: USB WDM device
    cdc_wdm 2-1:1.6: cdc-wdm-175: USB WDM device
    usbcore: registered new interface driver cdc_wdm
    Initializing USB Mass Storage driver...
    cdc_acm 2-1:1.1: ttyACM0: USB ACM device
    cdc_acm 2-1:1.3: ttyACM1: USB ACM device
    scsi6 : usb-storage 1-2:1.0
    cdc_acm 2-1:1.9: ttyACM2: USB ACM device
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usbcore: registered new interface driver cdc_acm
    cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
    scsi7 : usb-storage 1-1.4:1.0
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a3)
    cdc_ether 2-1:1.7: wwan0: register 'cdc_ether' at usb-0000:00:06.1-1, Mobile Broadband Network Device, 02:80:37:ec:02:00
    usbcore: registered new interface driver cdc_ether
    input: Integrated Webcam as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input10
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v1.0.0)
    usbcore: registered new interface driver uas
    usbcore: registered new interface driver zaurus
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
    generic-usb 0003:046D:C52B.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input0
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input12
    generic-usb 0003:046D:C52B.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input1
    generic-usb 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input2
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
    logitech 0003:046D:C517.0001: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input0
    logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.1/input/input14
    logitech 0003:046D:C517.0002: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input1
    scsi 6:0:0:0: Direct-Access Seagate FreeAgent Go 102F PQ: 0 ANSI: 4
    sd 6:0:0:0: Attached scsi generic sg2 type 0
    sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 6:0:0:0: [sdb] Write Protect is off
    sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
    sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    scsi 7:0:0:0: Direct-Access Seagate FreeAgent Go 0142 PQ: 0 ANSI: 4
    sd 7:0:0:0: Attached scsi generic sg3 type 0
    sd 7:0:0:0: [sdc] 976773166 512-byte logical blocks: (500 GB/465 GiB)
    sd 7:0:0:0: [sdc] Write Protect is off
    sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00
    sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdc: unknown partition table
    sd 7:0:0:0: [sdc] Attached SCSI disk
    sdb: unknown partition table
    sd 6:0:0:0: [sdb] Attached SCSI disk
    hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
    hda-intel: Codec #1 probe error; disabling it...
    firewire_core: created device fw1: GUID 0001f2000001eda4, S400, 1 config ROM retries
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input15
    input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
    input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
    input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:04.0: irq 20, io mem 0xf0886000
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 19
    ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:06.0: setting latency timer to 64
    ohci_hcd 0000:00:06.0: OHCI Host Controller
    ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:06.0: irq 19, io mem 0xf0887000
    fuse init (API version 7.16)
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 3 ports detected
    ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 18
    nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 18 (level, low) -> IRQ 18
    nvidia 0000:02:00.0: enabling device (0004 -> 0007)
    nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
    nvidia 0000:02:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
    ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23
    nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 23 (level, low) -> IRQ 23
    nvidia 0000:03:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011
    loop: module loaded
    vboxdrv: Found 2 processor cores.
    VBoxDrv: dbg - g_abExecMemory=ffffffffa0f04d20
    vboxdrv: fAsync=0 offMin=0x1b9 offMax=0x1368
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
    [drm] Initialized drm 1.1.0 20060810
    usbcore: registered new interface driver wacom
    wacom: v1.52:USB Wacom tablet driver
    usb 3-4: new full speed USB device using ohci_hcd and address 2
    hub 3-4:1.0: USB hub found
    hub 3-4:1.0: 3 ports detected
    EXT4-fs (sda3): re-mounted. Opts: (null)
    EXT4-fs (sda3): re-mounted. Opts: (null)
    usb 3-4.1: new full speed USB device using ohci_hcd and address 3
    input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input19
    generic-usb 0003:413C:8157.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0
    usb 3-4.2: new full speed USB device using ohci_hcd and address 4
    input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input20
    generic-usb 0003:413C:8158.0007: input,hidraw6: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0
    Adding 6243324k swap on /dev/sda4. Priority:-1 extents:1 across:6243324k
    usb 3-4.3: new full speed USB device using ohci_hcd and address 5
    Bluetooth: Core ver 2.15
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: Generic Bluetooth USB driver ver 0.6
    usbcore: registered new interface driver btusb
    CE: hpet increased min_delta_ns to 11520 nsec
    CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
    EXT4-fs (sda3): re-mounted. Opts: barrier=1,data=ordered,commit=360
    forcedeth 0000:00:0a.0: eth0: no link during initialization
    ohci_hcd 0000:00:06.0: PCI INT A disabled
    ohci_hcd 0000:00:06.0: PME# enabled
    ohci_hcd 0000:00:06.0: BAR 0: set to [mem 0xf0887000-0xf0887fff] (PCI address [0xf0887000-0xf0887fff])
    ohci_hcd 0000:00:06.0: restoring config space at offset 0xf (was 0x1030100, writing 0x1030105)
    ohci_hcd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00003)
    ohci_hcd 0000:00:06.0: PME# disabled
    ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:06.0: setting latency timer to 64
    NET: Registered protocol family 10
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Bluetooth: L2CAP ver 2.15
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    Bluetooth: SCO (Voice Link) ver 0.6
    Bluetooth: SCO socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM ver 1.11
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    i2c /dev entries driver
    wlan0: authenticate with 1c:af:f7:89:a6:76 (try 1)
    wlan0: authenticated
    wlan0: associate with 1c:af:f7:89:a6:76 (try 1)
    wlan0: RX AssocResp from 1c:af:f7:89:a6:76 (capab=0xc31 status=0 aid=1)
    wlan0: associated
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    cfg80211: Calling CRDA for country: GB
    cfg80211: Regulatory domain changed to country: GB
    cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    Intel AES-NI instructions are not detected.
    padlock_aes: VIA PadLock not detected.
    wlan0: no IPv6 routers present
    EXT4-fs (sda3): re-mounted. Opts: commit=0
    warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
    ifconfig wlan0:
    wlan0 Link encap:Ethernet HWaddr 00:22:5F:62:3D:05
    inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fe80::222:5fff:fe62:3d05/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:87499 errors:0 dropped:0 overruns:0 frame:0
    TX packets:137443 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:23679050 (22.5 Mb) TX bytes:160748042 (153.3 Mb)
    I wonder why this is happening
    Last edited by king.flasher.dave (2011-04-13 16:15:59)

  • Incredibly slow speeds

    Hello
     For the second day running I'm experiencing incredibly slow speeds on my option 3 broadband package.
    My Homehub says my downstream is connected at 283kbps, and my upstream at 440kbps. Normally my downstream is 8000kpbs or so
    I spent a very very long time on the phone to BT yesterday, who told me a variety of different things, but nothing that resolved it. 
    Can one of the mods have a look for me please?? I don't know how it'll ever get fixed otherwise!!
    Best,
    D

    Thanks for your reply,
    Here's the stats from the router:
    Connection information
    Line state
    Connected
    Connection time
    0 days, 3:54:17
    Downstream
    283 Kbps
    Upstream
    440 Kbps
    ADSL Settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    35.4 dB / 30.2 dB
    Line attenuation (Down/Up)
    16.0 dB / 8.3 dB
    Output power (Down/Up)
    0.0 dBm / 11.8 dBm
    It's been crawling along since yesterday morning... 
    I'm running off the North Paddington exchange 
    BT Speedtester says: Your configured download throughput speed for this service is 250 k
     Download speedachieved during the test was - 117 Kbps
     For your connection, the acceptable range of speedsis 50-250 Kbps.
     Additional Information:
     Your DSL Connection Rate :282 Kbps(DOWN-STREAM), 440 Kbps(UP-STREAM)
     IP Profile for your line is - 250 Kbps
    The throughput of Best Efforts (BE) classes achieved during the test is - 7.69:24.79:67.52 (SBE:NBEBE)
    These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
    There's something massively wrong here...
    I'm pretty good with figuring out computer things. Of course, I've done all the usual, restarting the hub, swapping the microfilter etc.
    Initially I thought I may have been capped, but the helpdesk told me this wasn't the case. My download rate is exactly 28kb/s, not a kilobyte over or under which would indicate some form of limiter applied...
    I really need the net functioning correctly today and tomorrow, as I'm working from home... obviously BT's timing is perfect
    Hopefully someone from BT will see this and take a look for me?
    Best,
    D

Maybe you are looking for

  • I have download pro cc 2014 , i want to open my resent itmes , how can i do now ??

    I updated the programme to PRO CC 2014 , and i wanna open my resent items, but i press my work , they said "This project was saved in a newer version of Adobe Premiere Pro and cannot be opened in this version " What can i do right now ? thanks so muc

  • On button click to fill out form on same page as report

    Hi, I have a report that contains a name that I want to pass in to a field in a form on a different region on the same page. My button located on the report is has its own column called ADD_LINK. Here is the button. <button id="apexir_btn_ADD" class=

  • Preventing java.util.logging.Logger from writing to STD ERR.

    Hi! I'm currently writing a program which uses the java.util.logging package for logging. For some reason it writes ALL logging to std err (as well as to the designated (file) handlers). From what I gather, this is probably done via a ConsoleHandler,

  • OIM Design Console in UAT pointing to test database

    Hello, I am running on OIM 11gr2ps2.  The configuration admin turned the uat environment to us.  When we started the OIM design console for uat, we noticed that it's pointing to the test database. We checked config/xlconfig.xml for uat and it's point

  • Vendor Master BADI

    First time working on Badi ...I need to enhance the vendor master screen ( xk01 ) with some fields . I m following this link to implement the badi vendor_add_data_bcs... http://help.sap.com/saphelp_nw04/helpdata/en/9d/12233a0edd7978e10000000a11402f/f