Broadband speed drop since line fault repair

We have recently had a phone line fault fixed but after more than 3 days  the broadband speed has been lower than it was during the fault and less than half its original speed.
Pre-line issue downstream was around the 16,500kbps with some drops down to 13,000kbps. The line developed a fault which started causing dc's and the phone line became noise with constant cracking and rustling sounds which turned out to be a damage connector causing water to corrode the cables, during that time when active broadband speeds dropped but while connected gave 9726kbps download and 888kbps upload, the phone line was fixed on friday the 15th of January and the phone line itself is very quiet, better than its been in maybe years, no noise that i can hear at all. However the connection dropped out during the night after the line was fixed and came back at 6652kbps down and 440kbps up, it remained at this speed for atleast 3 days then the router reconnected at 6652kbps down with 888kbps up were it remained until this morning, the router reconnected again at exactly the same speed.
I can understand it dropping originally due to the fault but has had over 72hrs connected but the speed has not increased, infact the speed is slower than with the fault which makes very little sense but i suspect is something to do with the noise margin, I include router and btw reports. Hopefully I can get some help with this.
Thanks
Jon
HomeHub2 Connection info
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 2:59:42
Downstream
6,652 Kbps
Upstream
888 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
11.8 dB / 12.8 dB
Line attenuation (Down/Up)
27.0 dB / 13.6 dB
Output power (Down/Up)
0.0 dBm / 12.8 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
1678 / 4294967264
CRC Errors (Down/Up)
0 / N/A
HEC Errors (Down/Up)
N/A / 0
Error Seconds (Local)
0
Results from btw preformance test
 Download speedachieved during the test was - 5.85 Mbps
 For your connection, the acceptable range of speeds is 2 Mbps-7.15 Mbps.
 IP Profile for your line is - 5.87 Mbps Upload speed achieved during the test was - 0.71Mbps
 Additional Information:
 Upstream Rate IP profile on your line is - 0.83 Mbps
Solved!
Go to Solution.

Great just shy of 3days connected I appear to have had another sync on the line, still no change to downloadspeed but yet again an upload speed increase, Obviously the exchange is trying to resync but it seems my download speed is stuck. This was the 1 and only connection change, should have posted the stats las tnight to show 2days 12+hrs before I went to bed
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 3:50:34
Downstream
6,652 Kbps
Upstream
1,132 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
11.9 dB / 5.8 dB
Line attenuation (Down/Up)
27.0 dB / 13.6 dB
Output power (Down/Up)
0.0 dBm / 12.5 dBm

Similar Messages

  • Slow broadband since line fault fixed

    Good Afternoon,
    A few weeks ago my Broadband dropped out completely which was due to a line fault which has since been repaired. Prior to the line fault I had a connection / download speed close to 1.8Mbps.
    Since the fault has been 'repaired' I have struggled to keep a stable connection, the Broadband drops out randomly and is also much slower (almost unbearably slow). I have done all the home help checks etc. and having read many posts on this forum I have concluded that part of the problem may be my Noise margins.
    I have not reset my router for several days and have had a connection for over three days now.
    Here are the stats from my router and results of the BT Speed test:
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    3 days, 03:24:38
    Downstream:
    576 Kbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    8.2 dB / 18.0 dB
    Line attenuation (Down/Up):
    61.1 dB / 31.5 dB
    Output power (Down/Up):
    16.3 dBm / 12.2 dBm
    FEC Events (Down/Up):
    420072 / 382
    CRC Events (Down/Up):
    676 / 85
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    1566 / 45
    Error Seconds (Local/Remote):
    592 / 238
    Speed test results:
    Download Speed (Mbps): 0.50
    Upload Speed (Mbps): 0.32
    Ping Latency (ms): 52.75
    To reiterate - nothing in my setup has changed and I haven't done anything that could have caused the problems. The problems have been since the line fault (which I reported as a fault and have had closed out) was repaired.
    I will contact the mods for help and see if they can do anything.
    Solved!
    Go to Solution.

    Ok, couple of things,
    Roger, did the quiet line test - no problems.
    John,
    I went to check the wiring and found (as I suspected) that both the socket where I plug the router in and the phone extension are hard wired into the faceplate front of the socket that plugs into the test socket - if that makes sense. It assume it shouldn't make any difference though. All my problems have been since the line fault that BT traced and fixed, not problems with my internal wiring. As mentioned previously, my connection and speeds have been fine until the outside fault.
    So in checking this, I disconnected my router :-(
    It has reconnected and I will post the stats and test results below. What is going on? My connection rate has leapt up to 1.18Mbps but download rate is still poor.
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 00:01:17
    Downstream:
    1.156 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    7.7 dB / 19.0 dB
    Line attenuation (Down/Up):
    61.0 dB / 31.5 dB
    Output power (Down/Up):
    17.4 dBm / 12.2 dBm
    FEC Events (Down/Up):
    28 / 0
    CRC Events (Down/Up):
    0 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    0 / 0
    Error Seconds (Local/Remote):
    600 / 239
    Speed tester results:
    Download speed achieved during the test was - 0.37
    Mbps
    For your connection, the acceptable range of speeds is 0.05 Mbps-0.5 Mbps.
    Additional
    Information:
    Your DSL Connection Rate :1.18 Mbps(DOWN-STREAM),
    0.45 Mbps(UP-STREAM)
    IP Profile for your line is - 0.5 Mbps

  • Slow broadband speed after noisy line repaired

    I've recently had a noisy line which eventually got repaired (dirty connection on block at local poll). Since then Broadband has remained connected (good) but download speed has been none existant >250Kbps ASDL line details are as below:
    I'm not getting any progress on the fault I've registered with BT on Dec 12 (says more testing is required), I keep chasing with the online support chat but keep getting the same response "we need to do some checks on the line we will get back to you in a hour or so, an then nothing". Any tips on how to get resolution of the issue speeded up?
    ADSL line status
    Connection information
    Line state
    Connected
    Connection time
    0 days, 0:00:44
    Downstream
    283 Kbps
    Upstream
    1,088 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    9.2 dB / 6.3 dB
    Line attenuation (Down/Up)
    43.5 dB / 24.0 dB
    Output power (Down/Up)
    0.0 dBm / 13.0 dBm
    Solved!
    Go to Solution.

    Well the noise margin has gone up from 9.2bB to 15.4dB, which is much better, and leaves lots of room for a speed improvement.
    You must be losing a lot of signal between the master socket and wherever you plug your home hub into.
    Your estimated final speed should be about 7552Kbs, but you are stuck in a banded profile due to the line fault.
    You are not going to get the full speed with a margin of 9.2db, but if its not practical to use the master socket, it would be worth disconnecting the bellwire while you are up in the loft, as that may help reduce any problems on your extension.
    See here for instructions.
    Bellwire fix.
    This could help quite a bit.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Broadband Speed dropped and wont come back

    Hi, I need help and advice please.
    Background info first though, so please bare with me.
    During last July 2011 I was fed up of very low speeds and managed to get a BT engineer out to check the wiring etc... He did a great job by finding a badly insulated cable between myself and the Cabinet in our village. He also changed our master socket to a newer version.
    Over the next few days my broadband speed went from 0.74mb download to 1.95mb download. Fantastic!
    This speed has pretty much been a consistent rarely dropping below 1.7mb and at times has even gone up to my highest recorded of 2.46mb. I thought this was brilliant, I could watch iPlayer no problems and xbox live was even bearable (most of the time).
    The big problem where I live is sometimes we have power cuts. Sometimes lasting hours but mainly just for seconds. Even so it switches the BB router off. (I know, but not my fault)
    When we had the freak snow fall the other month problems started to raise their head. The computers in the household found issues connecting to the router and to resolve this BT BB Helpdesk kept advising me to reset router to enable connection. After connecting new ADSL filters the speed returned but connection issues continued.
    BT supplied me with a brand new home hub 3 which I connected thinking it would give me my 2.4mb speeds again. Oh No. To be fare I think I was getting 1.95mb but I wanted more, as most people would. Why cant I get 2.4mb most of the time I have had for a few months.
    Anyway I contacted BT who were kind enough to send a BT engineer out. He Said to me the Broadband speed is put out at the exchange (4.5km) at 8mb and comes into our village at between 3mb and 4mb. He detected no fault on the lines and spent the next 3 hours renewing 'D' and 'E' I think side of cabling (found this out later). He mentioned the noise was high but did something to lower it. On leaving he said I had 2.5mb and was confidant it would rise to 3mb.
    Great not drastic but should give me 250kbs to 50kbs extra.
    The day he was at my house we had 2 short power cuts followed by another couple some days later. This has not helped I'm sure.
    NOW TO THE ISSUE.
    My download speed since that day has not gone above 1.46mb download and every time I speak to the call centre they tell me my line is only capable of 2mb therefore 1.46mb is within acceptable range.
    I am so tired of explaining that I was capable of receiving 2.4mb some 2 months ago yet now since the new hub 3 and line fiddling I am only capable of a 2mb downstream - 1.46mb DLS.
    I know I have to wait 3 - 10 days but with power cuts its a nightmare, and they are so adamant about my 2mb downstream limit What the hell has happened.
    Here is a link to my recorded (Speedtest.net) data over the past 11 months showing actual proof of receiving 2.46mb:
    http://www.speedtest.net/results.php?sh=19a6b38248773feaa954bcf8e17ae768&ria=0
    And here is my BT speedtester data:
    1. Best Effort Test: -provides background information.
    Download  Speed
    1.38 Mbps
    0 Mbps
    2 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 1.38 Mbps
     For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
     Additional Information:
     Your DSL Connection Rate :2.21 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 1.5 Mbps
    My home Hub data:
    Line state:
    Connected
    Connection time:
    0 day, 17:16:04
    Downstream:
    2,208 Kbps
    Upstream:
    448 Kbps
      ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    9.3 dB / 15.0 dB
    Line attenuation (Down/Up):
    56.5 dB / 31.5 dB
    Output power (Down/Up):
    18.1 dBm / 11.9 dBm
    FEC Events (Down/Up):
    12650 / 48
    CRC Events (Down/Up):
    50 / 17
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    289 / 10
    Error Seconds (Local/Remote):
    0 / 0
    Please Help me I know I've had better than this but all the numbers point to the fact I can no longer have them. Why?
    Many thanks
    Jon
    Solved!
    Go to Solution.

    Hi JONNYYOUNG,
    I'm not educated enough to help but it mat reassure you, as it did me, to know your circumstances are not unique.
    Your story sounds very simialr to my experiende last November, speeds and line length being very similar.  An engineer said there was noise on my line so he switched me to another pair.  Did the engineer do that for you too ? Net result my speed dropped from ~2.3 to ~1.4Mbps. 
    Fortunately a 21CN upgrade at my excahnge has brought my speed back up to ~2.4Mbps.
    I'm sure imjolly, john46 and maybe a mod if you need it will sort you out as well as they did me.
    Good luck,
    dfenceman 
    Best regards,
    dfenceman

  • Strange broadband speed drop

    Hello
    Since Monday I've noticed sudden drop in my broadband speed. Usually I've been receiving 80-120kbps but since Monday it is only 15-21kbs. I did everything they saying about improving broadband speed and it is not working. Strange thing  for me is that Hub stat showing good downstream:
    ADSL line status
    Line state
    Connected
    Connection time
    0 days, 0:45:30
    Downstream
    1,792 Kbps
    Upstream
    448 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.1
    Latency type
    Interleaved
    Noise margin (Down/Up)
    9.8 dB / 17.0 dB
    Line attenuation (Down/Up)
    59.0 dB / 31.5 dB
    Output power (Down/Up)
    16.9 dBm / 12.4 dBm
    Loss of Framing (Local)
    15
    Loss of Signal (Local)
    2
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    67106 / 0
    CRC Errors (Down/Up)
    4583 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    7
    But I still can download with max 21 kb/s.
    What's more I did speed check via BT web site and did WCC test (whatever it means) and I received following info:
    FAQ
     WCC Assured test InConclusive.
    Your WCC service was found to be performing poorly. Please raise a fault with your service provider, stating that the BT Performance Tester tool indicates
    poor service throughput performance.

    Hi Dragdy
    Did you notice what your present IP profile is set to?....
    I'm betting it's come down, because you have loss of signal after only a 45 minute connection time.
    A BT speedtest ..  will tell you :  http://www.speedtester.bt.com/

  • Banded connection after line fault repaired - how ...

    Hi there,
    I hope someone can help. After a recent line fault where we lost the phone line and broadband connection and the subsequent repair of the line fault, our broadband connection has been banded at .25mb
    I've read all the other posts concerning this and how leaving everything along for 5 or so days should see an automatic correction of this but after doing exactly that for 5 days, I've done a diagnostic and something appears to have happened 9 hours ago, I think resulting in a reset.
    So, am I back to square one? do I have to wait another 5 days an hope the connection remains intact. Will have had this problem for a month by then whereby I'll have been paying for broadband speed with a dial up connection.
    Can anyone recommend anything please?
    Here are the stats...

    Keith_Beddoe wrote:
    This will explain how it works.
    Why has my speed dropped
    Keith is absolutely correct and his links give good advice ....
    However if you get caught in the loop whereby the DLM cannot promote the line profile because your router or hub is still dropping the connection, you have to find out why it is happening.
    Even though you had a line fault fixed (supposedly) often the repairs are not 100% reliable, especially if the line has suffered a HR fault, or is subject to spurious burst noise which was not apparent when the BTo engineer left your premises, and he isn't a clairvoyant .... so if it continues to drop the connection, you need to report it back to BT support, and maybe go through the simple diagnostic tests again ... as outlined in Keith's help files.
    Sometimes a fix is not forthcoming first time round, and ADSL can be troublesome with intermittent problems.

  • Broadband Speed dropped suddenly

    Hi There,
    Since the New Year our broadband speed has dropped from 1mbps to 0.1mbps. At that point our land line also stopped working totally however we have had an engineer around to repair the landline. He came to the conclusion that there was internal wiring in the master socket causing it to short circuit.  He literally ripped the wires out of the master socket. This made the landline work again. The broadband speed is still running very slowly causing great frustration. 
    It's a home hub 3
    Here are the results of the speed test I just carried out
    Test1 comprises of Best Effort Test:  -provides background information.
    Download  Speed
    101 Kbps
    0 Kbps
    250 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 101 Kbps
     For your connection, the acceptable range of speeds is 50-250 Kbps.
     Additional Information:
     Your DSL Connection Rate :1568 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 135 Kbps
    I am expecting to get at least 1mbps. Any ideas what the problem could be? I don't think it is any equipment. I Have tried the test socket and i recieve the same results
    Solved!
    Go to Solution.

    32.9db gives me IP profile of 6500kbps but im getting an IP profile of only 1250 kbps. Is this because of high noise margins?
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    16.3 dB / 28.0 dB
    Line attenuation (Down/Up):
    32.9 dB / 17.0 dB
    Output power (Down/Up):
    17.8 dBm / 12.2 dBm
    FEC Events (Down/Up):
    44142631 / 18
    CRC Events (Down/Up):
    1833 / 13
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    3411 / 19
    Error Seconds (Local/Remote):
    2043 / 35

  • Broadband Speed Drop to 0.1MB

    Hello everybody,
    I'm having problems with my broadband, and would appreciate if anybody has had similar issues and can offer advice.
    I usually receive speeds of 2.5MB.  For nine days I have had a constant speed of 0.1MB.  I contacted BT on July 22nd in India and was told it was a line fault.  The line engineer arrived yesterday and tested the line at my home and the local exchange and said there was no problem at all; it must be a broadband issue and you have to call BT again.
    This I did and have had immense problems with the service there.  It's like talking to robots and they say it is a line/broadband issue and I now have to wait up to 48hrs for a call from a BT Openreach engineer.  I'm also having a daily call from the Complaints Manager in India.
    My problem is this:  despite six calls now to BT there has been no progress at all and it is incredibly draining to talk to the staff in India.  They are very polite and patient, but they don't really understand what they're doing, and I have little faith that progress will be made with the Complaints Manager (who yesterday told me that he was a 'manager', not just a 'technician' and that I should forget what the engineer told me and listen to him.)
    What options are there for me to have BT fix this problem other than what I have already done since this clearly has had no effect?

    Yes, please see the details below:
    I can't use the BT speed test but another one gives me Download 128kbps, Upload 355
    ADSL line status Connection Information
    Line state Connected
    Connection time 0 days, 22:38:25
    Downstream 160 Kbps
    Upstream 448 Kbps
    ADSL Settings
    VPI/VCI 0/38
    Type PPPoA
    Modulation G.992.1 Annex A
    Latency type Interleaved Noise margin (Down/Up) 10.6 dB / 16.0 dB
    Line attenuation(Down/Up) 49.5 dB / 29.0 dB
    Output power (Down/Up) 0.3 dBm / 1.3 dBm
    Loss of Framing (Local/Remote)
    0 / 0
    Loss of Signal (Local/Remote)
    0 / 0
    Loss of Power (Local/Remote)
    0 / 0
    FEC Errors (Down/Up)
    21295 / 487
    CRC Errors (Down/Up)
    28891 / 263
    HEC Errors (Down/Up)
    7884 / 216
    Error Seconds (Local/Remote)
    21877 / 440

  • Broadband Constantly dropping since Broadband Talk...

    Firstly - if anyone from BT reads this and cares about customer service and support, get a grip it is the worst support I have ever had the need to contact!
    Two weeks ago I finally swap my fully working and stable Netgear router over to a Home Hub, with the intention of getting rid of my Vonage VOIP service (which works a treat, but costs!) and use the Broadband talk service. The hub and phone arrived on the 10th (I think) and plugg in and all worked well ... however it would seem that I did not have the required broadband talk number and password. It took nearly two weeks of long phone calls to various people getting no where, when finally last night they activated it and sent out the relevant information via email!
    However now my broadband connection is constantly dropping, and broadband talk light sometimes goes back to blue, but often just stays at orange ... and as the broadband is dropping (as I type, but hopefully I'll get a window to post it in) my internet connection is now useless.
    Performing the line check on the BT website said there was a fault and gave me a reference number and a number to call. That's when two and half hours of passing around started. They tell me I don't have a line fault, that it is a fault at my end.... they seem **bleep** bent on finding something they can blame it on. Are you connected via wireless or ethernet, well I have both. Which operating system, well I have Seven, Vista, XP Pro, 98, Me, an PS3 and an Iphone. Then we move down the it must be the cables to the socket in the house (well not changed since last night when BBT was activated!), and then I have to move the cupboard in the hall to get access to the master socket to tell them what it looks like! What is the point of that one!!
    I am told that it is purely a coincidence that it dropped when the BBT was activated (one **bleep** of a coincidence!) and after much more discussion finally I was told that he was 'honestly sorry' that I had a problem, and would book an engineer to look at it tomorrow between 8am and 1pm, but they need 48 hours to resolve it! Basic maths that one!
    Has anyone else experienced these problems? Why is BT customer support so scripted and if your problems don't follow the tick boxes they are lost, and just start again? If I pay my phone bill late, I get charged a fee for doing so ... what compensation do I get for loss of service?
    The broadband lights finally came back on so I'll try the post option.

    Further to my last, this is a section of the event log from the router, the VOIP certainly appears to be having a problem.....  (I've removed my phone number so the ***'s are normally a number.
    12:50:11  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:50:11  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:50:10  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:50:10  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.6 dB)
    12:49:58  24 Sep
    FIREWALL event (1 of 1): created rules
    12:49:58  24 Sep
    xDSL linestate down
    12:49:58  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:49:43  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 200 OK - SIP message received
    12:49:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:49:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 401 Unauthorized - SIP message received
    12:49:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:47:07  24 Sep
    VOIP: [2.0A] [100] [] 404 Not Found - SIP message sent
    12:47:07  24 Sep
    VOIP: [2.0A] [100] [-] OPTIONS - SIP message received
    12:44:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:44:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:44:41  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:44:41  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.3 dB)
    12:44:28  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:44:24  24 Sep
    FIREWALL event (1 of 2): created rules
    12:44:24  24 Sep
    xDSL linestate down
    12:43:10  24 Sep
    CONFIGURATION saved by TR69
    12:43:02  24 Sep
    SNTP Synchronised to server: 213.123.20.170
    12:42:42  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:42:42  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:42:41  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:42:40  24 Sep
    PPP link up (Internet) [86.129.29.132]
    12:42:40  24 Sep
    PPP CHAP Chap receive success : authentication ok
    12:42:40  24 Sep
    PPP CHAP Receive challenge (rhost = ESR5.Sheffield3)
    12:42:36  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.5 dB)
    12:42:35  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:42:27  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:42:23  24 Sep
    xDSL linestate down
    12:42:17  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:42:04  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.0 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.4 dB)
    12:41:58  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:41:51  24 Sep
    xDSL linestate down
    12:41:49  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:41:29  24 Sep
    PPP link down (Internet) [86.129.24.10]
    12:41:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:41:05  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:41:05  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:41:04  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.5 dB)
    12:40:48  24 Sep
    FIREWALL event (1 of 1): created rules
    12:40:48  24 Sep
    xDSL linestate down
    12:38:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:38:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:38:05  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:38:05  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.2 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 23.0 dB, Up: 7.5 dB)
    12:37:50  24 Sep
    FIREWALL event (1 of 1): created rules
    12:37:50  24 Sep
    xDSL linestate down
    12:35:20  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:35:20  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:31:56  24 Sep
    LOGIN User admin logged in on [HTTP] (from 192.168.1.66)
    12:30:20  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:30:20  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:30:19  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:30:19  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.4 dB)
    12:30:02  24 Sep
    FIREWALL event (1 of 1): created rules
    12:30:02  24 Sep
    xDSL linestate down
    12:29:05  24 Sep
    CONFIGURATION saved by TR69
    12:28:33  24 Sep
    [CWMP] Too many AUTHENTICATION FAILURES CPE -> ACS.
    12:28:30  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:28:30  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:28:29  24 Sep
    FIREWALL event (1 of 2): deleted rules
    12:28:29  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.5 dB)
    12:28:15  24 Sep
    FIREWALL event (1 of 2): created rules
    12:28:15  24 Sep
    xDSL linestate down
    12:27:53  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 400 Too many contacts - SIP message received
    12:27:53  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:27:52  24 Sep
    PPP link up (Internet) [86.129.24.10]
    12:27:52  24 Sep
    PPP CHAP Chap receive success : authentication ok
    12:27:51  24 Sep
    PPP CHAP Receive challenge (rhost = ESR5.Sheffield3)
    12:27:47  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:27:41  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:27:40  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 23.0 dB, Up: 7.3 dB)
    12:27:35  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:27:32  24 Sep
    PPP link down (Internet) [86.137.179.222]
    12:27:29  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:27:27  24 Sep
    xDSL linestate down
    12:27:08  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:27:08  24 Sep
    FIREWALL event (1 of 2): deleted rules
    12:27:08  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 11.9 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.5 dB)
    12:26:55  24 Sep
    FIREWALL event (1 of 2): created rules
    12:26:54  24 Sep
    xDSL linestate down
    12:26:54  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:26:07  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 200 OK - SIP message received
    12:26:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:26:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 401 Unauthorized - SIP message received
    12:26:06  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:26:05  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.0 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 7.2 dB)
    12:25:53  24 Sep
    xDSL linestate down
    12:25:53  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:25:24  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 200 OK - SIP message received
    12:25:24  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:25:24  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] 401 Unauthorized - SIP message received
    12:25:24  24 Sep
    VOIP: [2.0A] [************] [FXS DECT1 DECT2 DECT3 DECT4 DECT5] REGISTER - SIP message sent
    12:25:23  24 Sep
    FIREWALL event (1 of 1): deleted rules
    12:25:23  24 Sep
    xDSL linestate up (ITU-T G.992.1; downstream: 8128 kbit/s, upstream: 448 kbit/s; output Power Down: 13.8 dBm, Up: 12.1 dBm; line Attenuation Down: 13.0 dB, Up: 6.0 dB; snr Margin Down: 22.0 dB, Up: 6.9 dB)
    12:25:17  24 Sep
    LOGIN User Basic logged in on [HTTP] (from 192.168.1.66)
    12:25:10  24 Sep
    FIREWALL event (1 of 1): created rules

  • Broadband speed drop

    HI All
    My broadband speed has dropped since 1st December, i am on a 10mb line but since then the connection has drop to 1.4mb-1.8mb. I have done regular speed checks in the morning, afternoon (6pm) and around 9.30pm, but the speed has stayed constant since then and i gather 5 days is enough to find help. I have asked my neighbour and their internet speed is ok, I have checked my router and i think it's working properly. Is there a website to find out work beening done in my exchange? It's starting to get annoying watching HD youtube videos on my Ipad as it loads extremely slow.
    Many thanks in advance
    Dave

    I totaly forgot my router password so i had to reset it. The settings should be the default like my orignal settings. I did another speed test and it the same as the last 5-6 days/
    The BT Speed Test cames back as 1.75 MBPS
    My router settings are:
    Multiplexing Method                               VC BASED
    VPI
    VCI
    Port
    Status
    TxPkts
    RxPkts
    Collisions
    Tx B/s
    Rx B/s
    Up Time
    WAN
    PPPoA
    4777
    5765
    0
    997
    4117
    00:22:25
    LAN
    10M/100M
    7370
    6213
    0
    4155
    1073
    00:25:10
    WLAN
    11M/54M
    414
    386
    0
    263
    34
    00:17:36
    ADSL Link
    Downstream
    Upstream
    Connection Speed
    2271 kbps
    880 kbps
    Line Attenuation
    34.0 db
    18.3 db
    Noise Margin
    27.9 db
    5.3 db

  • Broadband speed dropped from 10Mb to 250K overnigh...

    My broadband speeds have dropped massively overnight and I was wondering if any of the experts on here can give me some guidance on what to try or to do next?
    I've been on BT Total Broadband for ages and it was running typically at about 10Mbps according to occasional checks on Speedtest.net since early May when my line was upgraded - previous had been at about 6Mb. However, today I noticed my internet access was sluggish, I tried Speedtest.net again and was shocked to find I was being quoted a download speed of 0.24Mb (upload strangely was higher at 0.38). I then tried Speedtester.bt.com and it says my IP profile is 250Kbps with an actual speed of 159Kbps, so this makes it sound like I'm being throttled down, yet I haven't even come close to any limits. Also it's a bit strange to have it happen so suddenly - everything was working fine last night and the router has been on 24/7 (although I did reset it this morning thinking that maybe this would solve the speed issue - no such luck!)
    I'll post the stats from the Speedtest and from my router below (I use a Belkin, not the Homehub in case that makes a difference), but would appreciate some ideas about what might have happened and anything I can do.
    ---------- Speedtester.bt.com -----------
    Download speed achieved during the test was - 159 Kbps
     For your connection, the acceptable range of speeds is 50-250 Kbps.
     Additional Information:
     Your DSL Connection Rate :1496 Kbps(DOWN-STREAM), 536 Kbps(UP-STREAM)
     IP Profile for your line is - 250 Kbps
    The throughput of Best Efforts (BE) classes achieved during the test is - 19.52:25.06:55.42 (SBE:NBEBE)
    These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
    ----------- Router Stats ------------
    ADSL   
    Type          Fast Path    
    Status        SHOWTIME    
                                  Downstream   Upstream
    Data rate(Kbps)        1496Kb          536Kb
    Noise Margin             26                 25
    Output power(dBm)  99                 196
    Attenuation(dB)        38                 16

    Hi there I'm also having the same problem unfortunately.  A coupe of days ago I was transferring a file from my laptop to my desktop via wireless and it caused my home hub 2 to hang.  I had to reboot it a couple of times to get it working again but once it was back up again I found browsing to be really slow.  I went on speedtest.net and discovered that I was getting 250k down and about 300k up.  I power cycled the home hub a few times and checked all of my microfilters and connections (just to be on the safe side) but it was still slow.  I went on the btspeedtest site and it is showing that my ip profile is 250k even though I am connected at 4,500k.  I called the bt helpdesk this evening and was told that there looks like there was a problem but that they are showing my ip profile as being 3000k now and that I should check in a few hours on the bt speedtest site again.  Well I did and it's still showing as 250k.  The details from my hub and the speedtest site are below.  Any thoughts and help would be very greatly appreciated. 
    Best effort test download speed = 219 kbps
    Your DSL connection rate is 4576 kbps (down stream), 448 kbps (up stream)
    IP Profile for your line is 250 kbps
    ADSL Settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.1
    Latency type
    Interleaved
    Noise margin (Down/Up)
    6.3 dB / 21.0 dB
    Line attenuation (Down/Up)
    49.0 dB / 31.0 dB
    Output power (Down/Up)
    18.9 dBm / 11.9 dBm
    Connection Information
    Line state
    Connected
    Connection time
    0 days, 1:51:21
    Downstream
    4,576 Kbps
    Upstream
    448 Kbps

  • Broadband speeds dropped

    I'm sorry if this has been posted before but it could of taken a while to find a thread on exactly the same subject as mine
    I got BT Broadband, Option 3 last month. When I signed up I was told I could get upto 7.5MB download speeds and for the last month I have been getting speeds of around 5 - 6.9MB which I was very happy about but over the last few days I have seen my speed drop to around 1.7 - 1.9MB and in 1 case as low as 0.7MB.
    My phone still works so I don't think there is a problem with my phone line, I don't believe there is a problem with my router but just so you know I have the HomeHub 2.0
    . I recently did a speed test on the BT website and it claims I can get upto 8MB which is 0.5 more than a month ago so is it possible that the exchange has had some work done on it and it will just take a few days for things to get back to normal? I would appreciate any help that you could give me

    Download speedachieved during the test was - 1313 Kbps
     For your connection, the acceptable range of speeds is 400-2000 Kbps.
     Additional Information:
     Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 2000 Kbps
    ADSL line status
    Connection Information
    Line state
    Connected
    Connection time
    0 days, 14:08:16
    Downstream
    8,128 Kbps
    Upstream
    448 Kbps
    ADSL Settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    G.992.1 Annex A
    Latency type
    Interleaved
    Noise margin (Down/Up)
    12.6 dB / 25.0 dB
    Line attenuation (Down/Up)
    14.6 dB / 6.0 dB
    Output power (Down/Up)
    15.3 dBm / 1.8 dBm
    Loss of Framing (Local/Remote)
    0 / 0
    Loss of Signal (Local/Remote)
    0 / 0
    Loss of Power (Local/Remote)
    0 / 0
    FEC Errors (Down/Up)
    2126 / 0
    CRC Errors (Down/Up)
    2 / 0
    HEC Errors (Down/Up)
    59 / 0
    Error Seconds (Local/Remote)
    2 / 0

  • Broadband speed dropped 3 Months ago and wont go b...

    Hi All,  hoping someone can help.  3 Months ago I was getting 1.7-1.8mb BT Vision worked, I could stream movies and watch iplayer.  My exchange (but not my cabinet) was upgraded so although half the village have infinity I don't and what's more is  my speed which dropped to 700kbps although having increased is now only back to 1.2mb.
    I have had numerous calls with advisors who say they have re-set profiles, sent a HH3, suggested new filters etc etc but still nothing has improved and I am still not back at previous speeds. The hub is plugged directly into the test socket section of the master.
    HH Manager currently shows
    Line state:
    Connected
    Connection time:
    1 days, 00:36:57
    Downstream:
    1.406 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    8.0 dB / 17.0 dB
    Line attenuation (Down/Up):
    61.9 dB / 30.0 dB
    Output power (Down/Up):
    17.2 dBm / 12.4 dBm
    FEC Events (Down/Up):
    13212 / 724
    CRC Events (Down/Up):
    12 / 327
    BTW speed test results show
     Download speedachieved during the test was - 1.23 Mbps
     For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
     Additional Information:
     Your DSL Connection Rate :1.44 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 1.25 Mbps
    The IP profile dropped since put in a new filter in yesterday
    Below is a graph from the SamKnows dashboard
    Can anyone interpret this dats and make any suggestions on my next steps with this problem

    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 01:00:16
    Downstream:
    1.438 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    8.2 dB / 17.0 dB
    Line attenuation (Down/Up):
    61.9 dB / 30.0 dB
    Output power (Down/Up):
    17.3 dBm / 12.3 dBm
    FEC Events (Down/Up):
    1273 / 1
    CRC Events (Down/Up):
    0 / 0
    No noise on quiet line test and still in test socket

  • Broadband speed drops from 4mb to less than 0.5mb ...

    Hello forum readers,
    I am having speed problems since early December where during the day time my download speed is 4mb.  However, after 7:30pm the speed then drops very quickly to below 0.5mb.  I did a speed test just now and it is:
     Download speedachieved during the test was - 268 Kbps
     For your connection, the acceptable range of speeds is 600-7150 Kbps.
     Additional Information:
     Your DSL Connection Rate :5344 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 4500 Kbps
    I have tried calling India technical support, all I got was "we are looking into the problem" over the weeks.  Very frustrating as it is so difficult to understand them.  They keep giving me excuses as to the causes.  Today I am told there is a problem with the exchange. I asked when can this be fixed by, the response was they are not going to fix it as the equipment is very expensive to replace.
    I am so frustrate by all their so uncaring attitude that I have obtained a MAC code tonight.  Will a different provider be any different if the problem is with the exchange?
    Has any forum readers experience this speed dropping problem?  I can understand if the speed drops due to higher demands in the evening, but with this slow speed it is impossible to use the internet for anything meaningful as a web page took over 40 seconds to load. 
    I am on the unlimited Option 3, and my exchange is Poplar, London.
    Is there a BT moderator on this forum who can help me resolve this speed problem please?
    Thanks.

    Hello peeps,
    An update on my slow down boardband connection...
    I have reported the problem to "No Help Indian Technical Support" since 11 December, still no resolution! 
    I was told to wait until the end of February as work on the exchange may take place to increase capacity.  Nobody called to update me on what is happening since my last post.  Called Indian support for an update (17 March) only to be told my case was closed and problem resolved on the 28 February!  
    Then I asked to speak to a supervisor and the guy literally cut me off.  All I wanted to ask was why they think the problem was resolved when I am still getting the same slow down every evening.  I tried calling them again, but useless idiots who would make you answer their scripts again, but still they can't give me an update or what are they going to do about the problem.
    I am at a loss in how to obtain an update from them.  I am sure many of you who have the experience of calling Indian will end up with frustrations.  They will try their best to ignore you especially with questions they have not a clue in answering.  Every time they say they will call back, but no they don't. 
    Why is BT technical support be handled by such non-technical idiots?  The minute they have ran of scripts to follow then you are speaking to a blank wall.
    Anyone here know of a complaint number I can call or email?
    Thanks.

  • Quite a large speed drop since bad weather!

    Hello Forum peeps!
    Since installing infinity in April weve een pretty much constatly getting 38bg speeds, 1.5mb upload, were on the 40mb/2mb (although been emailed several times to be told we should now be able to get 9mb up), hadthe early issue of hub not waking up after a long period asleep, but otherwise rock solid.
    That is, up until the recent bad weather (not the snow as we got an inch tops for 6 hours!!!!) our speeds dropped right down to 1mg! i'm unable to run the full dianostic test on bt wholesale as it Wont display the results page! Keep getting Unable to display webpage message and on refresh it resorts to the start, and then after a 3 locks you out for an hour,  ive done the basic BT test which have links to sreengrab results below, and also frequent speedtet.net checks which vary from 1mg-12mg and wireless around 6mg (wreless usd to give 12-13mg on the netbook - no other way of testin as main pc died many moons ago! )
    have reset both the router and hub several times alowing the router tocyce before turning the hub back on, but makes very little difference,
    i havent rung india Yet, but am gettng to the stage where i ma have too!! thought i'd check with thos in the now first,
    just got to the stage of fed up and annoyed now at being hardly able to watch youtube videos without buffering all the time!!!!
    Screen grab first test
     http://img.photobucket.com/albums/v668/pastycat/in​finity_zps531b1159.jpg
    Screen rab second test
    http://img.photobucket.com/albums/v668/pastycat/in​finity2_zps23ed8bc0.jpg
    speedtest.net
    http://www.speedtest.net/result/2478136671.png

    I would advise contacting the moderators, they will take personal ownership over your case until it's resolved.
    They normally take 3 working days to reply, you can contact them here.
    You may wish to try and get some help on there twitter and will get a faster response! You can view their twitter page here!
    If this helped you please click the Star beside my name.
    If this answered your question please click "Mark as Accepted Solution" below.

Maybe you are looking for

  • Communication between two Macs Server

    Communication between two Macs Server: Can they work together and communicate and interact normally in a PowerMac network, OS X 10.5.8 Server installed, and a MacPro computer that is running Server 4.0.3 on Yosemite? Had to do some additional impleme

  • Upgrade from 10.1.3 to 10.1.3.1

    J dev install depens on copying files. We made many configurtion change to JDEv 10.1.3 Also We have installed a lot of extention to 10.1.3.1. We want to protect our own configuration. How can we do it when upgrading. In my opinion Upgrade process nee

  • How to call PL/SQL code from ODI

    Hello friends, Can you please let me the steps for calling a pl/sql code in ODI? Regards Ulhas

  • VPN/RDC HP OfficeJet 4632 printing

    I am trying to print from my Office workstation to my Laptop with USB connection to the HP OfficeJet 4632 printer. I have installed the print drivers for the OJ 4632 on the Office workstation that is running Win 7 Pro x64. The workstation showes the

  • Insert data from oracle  to sql server

    we have running R12.1.1 . our company wants to deploy some CRM Application with sql server database. Continuously we have to insert data ( some fields from some tables of Order Management module ) from ORACLE -----------> SQL Server My Questions are