Broadband Speed dropped and wont come back

Hi, I need help and advice please.
Background info first though, so please bare with me.
During last July 2011 I was fed up of very low speeds and managed to get a BT engineer out to check the wiring etc... He did a great job by finding a badly insulated cable between myself and the Cabinet in our village. He also changed our master socket to a newer version.
Over the next few days my broadband speed went from 0.74mb download to 1.95mb download. Fantastic!
This speed has pretty much been a consistent rarely dropping below 1.7mb and at times has even gone up to my highest recorded of 2.46mb. I thought this was brilliant, I could watch iPlayer no problems and xbox live was even bearable (most of the time).
The big problem where I live is sometimes we have power cuts. Sometimes lasting hours but mainly just for seconds. Even so it switches the BB router off. (I know, but not my fault)
When we had the freak snow fall the other month problems started to raise their head. The computers in the household found issues connecting to the router and to resolve this BT BB Helpdesk kept advising me to reset router to enable connection. After connecting new ADSL filters the speed returned but connection issues continued.
BT supplied me with a brand new home hub 3 which I connected thinking it would give me my 2.4mb speeds again. Oh No. To be fare I think I was getting 1.95mb but I wanted more, as most people would. Why cant I get 2.4mb most of the time I have had for a few months.
Anyway I contacted BT who were kind enough to send a BT engineer out. He Said to me the Broadband speed is put out at the exchange (4.5km) at 8mb and comes into our village at between 3mb and 4mb. He detected no fault on the lines and spent the next 3 hours renewing 'D' and 'E' I think side of cabling (found this out later). He mentioned the noise was high but did something to lower it. On leaving he said I had 2.5mb and was confidant it would rise to 3mb.
Great not drastic but should give me 250kbs to 50kbs extra.
The day he was at my house we had 2 short power cuts followed by another couple some days later. This has not helped I'm sure.
NOW TO THE ISSUE.
My download speed since that day has not gone above 1.46mb download and every time I speak to the call centre they tell me my line is only capable of 2mb therefore 1.46mb is within acceptable range.
I am so tired of explaining that I was capable of receiving 2.4mb some 2 months ago yet now since the new hub 3 and line fiddling I am only capable of a 2mb downstream - 1.46mb DLS.
I know I have to wait 3 - 10 days but with power cuts its a nightmare, and they are so adamant about my 2mb downstream limit What the hell has happened.
Here is a link to my recorded (Speedtest.net) data over the past 11 months showing actual proof of receiving 2.46mb:
http://www.speedtest.net/results.php?sh=19a6b38248773feaa954bcf8e17ae768&ria=0
And here is my BT speedtester data:
1. Best Effort Test: -provides background information.
Download  Speed
1.38 Mbps
0 Mbps
2 Mbps
Max Achievable Speed
 Download speedachieved during the test was - 1.38 Mbps
 For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
 Additional Information:
 Your DSL Connection Rate :2.21 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
 IP Profile for your line is - 1.5 Mbps
My home Hub data:
Line state:
Connected
Connection time:
0 day, 17:16:04
Downstream:
2,208 Kbps
Upstream:
448 Kbps
  ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.3 dB / 15.0 dB
Line attenuation (Down/Up):
56.5 dB / 31.5 dB
Output power (Down/Up):
18.1 dBm / 11.9 dBm
FEC Events (Down/Up):
12650 / 48
CRC Events (Down/Up):
50 / 17
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
289 / 10
Error Seconds (Local/Remote):
0 / 0
Please Help me I know I've had better than this but all the numbers point to the fact I can no longer have them. Why?
Many thanks
Jon
Solved!
Go to Solution.

Hi JONNYYOUNG,
I'm not educated enough to help but it mat reassure you, as it did me, to know your circumstances are not unique.
Your story sounds very simialr to my experiende last November, speeds and line length being very similar.  An engineer said there was noise on my line so he switched me to another pair.  Did the engineer do that for you too ? Net result my speed dropped from ~2.3 to ~1.4Mbps. 
Fortunately a 21CN upgrade at my excahnge has brought my speed back up to ~2.4Mbps.
I'm sure imjolly, john46 and maybe a mod if you need it will sort you out as well as they did me.
Good luck,
dfenceman 
Best regards,
dfenceman

Similar Messages

  • TS3694 my iphone keeps turning its self of and wont come back on

    my iphone keeps turning its self of and wont come back on

    Plug it into a wall outlet, let it charge for half an hour and then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.

  • HT4623 my iphone just shut down and wont come back on

    my iphone just shut down and wont come back on what could be the problem

    Connect iPhone to Wall Charger for 10 minutes, it my turn ON itself. If still OFF, then keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds time holding both buttons while on charger.

  • My ipod has just turned off and wont come back on

    my ipod has just turned off and wont come back on but i know it had a good amount of battery left and if i plug it into my computer or docking station nothing happens please help...

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • IPhone 4S switched itself off and wont come back on. Please help?

    Hi,
    My iPhone 4S has started switching itself off randomly over the last week but would then switch itself back on several minutes later by itself. However, last night it switched itself off and no matter what ive tried it wont come back on. Ive tried the home+power button, connected to itunes and not, connected to itunes with the home button pressed. I rang the Geek Squad as I have insurance and they could suggest anything more. Im loathed to take it back to the shop as all the sales assistant will do is send it off, give me a rubbish temporary phone/brick and it will take ages to come back. I would be grateful if anyone can help please?

    Hi, my phone eventually came back to life of its own accord the next day but with virtually no battery life even though I'd given it a full charge. After it came back on I plugged it in to be recharged but the back became very warm whilst the power drained quicker than usual after I unplugged it.
    I took it to the Apple store later that day and thankfully the phone switched itself off again right in front of one of the Genius assistants. He couldn't diagnose the problem and so gave me a brand new handset straight away. Credit to Apple there and I'm so glad I didn't take it back to the car phone warehouse where I bought it from. They would have sent it away for tests for weeks.
    I've had no problems with my new handset to date.

  • My iphone 4s has just gone off and wont come back on can it be reset ?

    my iphone 4s is 1 day old i was playing draw something on it, it had 96% battery on it but it just went off now it wont come back on. even my computer is not detecting it when i plug it in to that. any ideas why and can it be reset like my ipod can?

    Thank you i did do this but didn't hold it long enough, then i just paniced and thought it was broken. thank you very much.

  • My phone went to a black screen and wont come back on, how do i fix it?

    At first, out of know where, it went to a white screen with a blach apple. Then Iplugged my phone into my computer and reset my phone and my home button or lock button wont work. Now its just on a black screen and wont turn back on. How do i fix this probkem with my phone?

    mckenzie8 wrote:
    my home button or lock button wont work.
    Won't work or are Broken ?

  • Trunks between 2950s stop working and wont come back

    I've seen this happen on 2 different 'pairs' of 2950s, so it's time to investigate. The scenareo:
    simple trunk (no vlan definitions) between 2 2950s. 1 switch looses power, when power is restored, the switch that didn't lose power doesn't pass any traffic. The interface is up (link and administrativly up) the logs don't show anything other than the interface went down and came back up. here's a sample port:
    interface FastEthernet0/23
    description new Feed from phone room switch
    switchport mode trunk
    no ip address
    I'm not using spanning-tree, there aren't any redunant paths. Its worked fine for months (until a ups failure), I set up a new port on the switch and swing the cable and it comes up. Any ideas?
    thanks!

    Hello,
    I know this is an old post... but I am posting here in case this is viewed by anyone with a possible solution.
    Our organization has multiple locations configured the same way:
    (x2) cross connected 2950 switches in trunk mode, configured the follwing way per each interface (fa0/19):
    interface FastEthernet0/19
    no ip address
    duplex full
    speed 100
    no cdp enable
    spanning-tree portfast
    Our problem is similar to the one explained in this initial post. The switches are auto-trunked via port #19.
    Let's call one switch "A" and one switch "B"
    Whenever power is removed from one of the switches (Switch A), and it has completed a restart, the opposite switch (Switch B ..the one which was not powered off) will not return to a "Trunked" state. When you run the "show int status" command, it shows that the port is "connected". Even though the switch which was initially restarted returns to "Trunked" mode.
    We have seen this with a few of our 2950's across the infrastructure.
    The bottom line is that restarting one of the switches causes the other to lose the trunked state. The only was to correct the issue is to restart the opposite switch as well.
    The IOS version is 12.1 (9) EA1d .. I know it's old, however we cannot upgrade it at this time due to policies within the organization.
    Could anybody shed some light on this?
    Thanks in advance..

  • My ipad just went blank and wont come back on, any help??

    My IPad went blank and will not come back on.  Is there a reset button or procedure??

    Try resetting your iPad by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • HT1688 my iphone just completey shut off, and wont come back on, even when connected to the charger

    my iphone completely turned off and will not come back on, even when connected to the charger. how can i turn it back on?

    Hello ozzy9294,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Best of luck,
    Mario

  • My ipod touch 5 turn its self off and wont come back on please can someone help

    my ipod touch turned its self off Last night had half of battery left and I cant turn it back on please can someone help cant live with out it

    Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds. If you see the silver apple, let go and let it reboot and see if it comes back

  • IPOD TURNED BLACK AND WONT COME BACK

    I clicked an app and then my screened turned black but it wont turn on and i have tried holding the buttons and nothing worked. I plugged it inot my computer and it doesnt appear in itunes. Please someone help me !!!

    Take it to an Apple Store and have it checked out.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • My i phones screen went black and wont come back

    i was walking in my hallway playing with my new i phone i got for christmas and dropped it picked it up and the screen went blank i tryed every thing nothing is working i need help!!!

    What to do if your iPhone will not turn on

  • My nano just quit and wont come back on. No evidence of it charging. Nothing. ????

    My ipod nano just stopped working. No evidence of it charging and computer is not recognizing it at all.

    Please press on the sleep/wake button while simultaenously holding down on the home button. (sleep wake button is the little rectangler button on the top of the device.
    If this does not resolve the issue read this article:
    http://support.apple.com/kb/HT1766
    good luck!

  • My iphone turned off last night and wont come back on, is this a normal problem

    My iphone4 shut down on me last night and it will not turn back on. It was in my coat pocket and was working fine then all of a sudden nothing. Any ideas what the problem could be and how to fix it

    did you end up getting a fix for this

Maybe you are looking for

  • Playlists and the previous/next buttons

    Once again, Encore proves to be difficult to work with. I have a bunch of m4v and matching ac3 files that I want to put into Encore to create a Blu-ray. However, I cannot place them all in a timeline and be done with it. Because of the null space at

  • Events in table maintenance generator 01

    Hi all,        I have an urgent requirement regarding the events in table maintenance generator.The requirement is i have a qty field in table i want to change the existing value it should allow only a lesser value.How to use TOTAL and EXTRACT struct

  • Process Chain/OS Command cp problem

    Hello, I am trying to execute a command similar to the following in an OS command in a process chain: cp /path/filename*.txt /path/filenamexxx.txt I know it's not a permissions problem. This is the error message from the Process Chain Maintenance Log

  • Made my first PKGBUILD... :)

    Hi Forum, I have made my first PKGBUILD, it is a hack of the PKGBUILD of BRLCAD, which I have used to pack Ofeli, http://www.ofeli.net/, to /usr{bin lib share doc} as required by Archer Philosophy. Here it is : # Maintainer: Loui Chang <louipc dot is

  • Fixing iTunes Error -34

    I've been trying to download a movie now for two days. At first I thought my computer just couldn't handle it, but then I read the message that popped up every time I clicked "download" more carefully. After I followed the "instructions" and emptied