Broadcast and Cache

Hi
1. As we know using information broadcasting, we can pre calculate or pre run the reports and send the output of the reports to the users via email. My question is. Is the report send as attachment in email to the users or how? And user drill down when opens the report
2. Is there any possibility for executing the report in the background and saving the report output in the central directory? So that when users comes in the morning and directly go to the directory and see the report
3. If the report is saved in the directory and when the user opens the reports, will he be able to drill down further in the report?
4. When USER1 executes the report ABC and then logs out. Later when USER2 opens the same report ABC and run the report for the same selection parameters does the report fetch the data from the cache or from the cube? Is cache the user dependent?
Hope i am clear
Regards
Annie

1. As we know using information broadcasting, we can pre calculate or pre run the reports and send the output of the reports to the users via email. My question is. Is the report send as attachment in email to the users or how? And user drill down when opens the report
> You have both the option. You can send them as zip file of XL or you can directly send them in the mail. No drill down.
2. Is there any possibility for executing the report in the background and saving the report output in the central directory? So that when users comes in the morning and directly go to the directory and see the report
> You can save the report in the KM as an URL link and send the user the user that link. It can be also stored in the KM (Knowledge manangement) at specified filder.
3. If the report is saved in the directory and when the user opens the reports, will he be able to drill down further in the report?
> The reports are generally send as an offline attachement. No drill down.
4. When USER1 executes the report ABC and then logs out. Later when USER2 opens the same report ABC and run the report for the same selection parameters does the report fetch the data from the cache or from the cube? Is cache the user dependent?
> It will fetch the data from the cache. Cache is not user dependent.
Thanks.
Shambhu

Similar Messages

  • Lenovo U310: Clean Windows 7 Installation Guide (including Rapid Start and Caching)

    Hi there,
    this is the first time that I am writing such a guide/tutorial/whatever you may call it – there are probably better ones, but though not being a total computer noob, it took me almost one week to get this pretty (now again) little beast running again. So hopefully this helps some others to avoid such stupid downtimes.
    A brief overview on what has happened to my original win 7 Home Premium:
    As some may know, this laptop is very well usable as a “Hackintosh” called Macbook clone. So that’s what I did. It turned out to be nice, but I wanted to go back to Windows after a while, using a clean W7 Pro installation to start over. Actually an easy task, format all drives, install Windows, be happy. Just as I had been doing this for years. Unfortunately, it turned out to be a real challenge. First, I couldn’t “see” my drives during installation (and thus not install), then I got random errors during installation aborting it at different points and finally rapid start and caching didn’t work. Every time I tried to activate them (after Win installation), it crashed my PC. I even found an (official Lenovo!) guide stating to install W7 on the SSD, which worked, but sucks due to space limitations. Oh and another very nice thing: The SSD showed up during WIN installation (but not the classical hard drive) stating it was about 60 GB. So as you can see, I have had a lot of different tries and errors. Why I didn’t use Lenovo Easy Recover? As said before, I erased all partitions…
    Before we start: If you have a good Windows running on the Laptop, do yourself a favor and disconnect the RAID 0 disks using the Intel Rapid Storage Application before(!!!) proceeding. It will make things much easier. And don’t forget to get all you data on an external drive or something.
    Ok, now let’s start.
    1.)    Prepare a USB Stick with the following driver
             http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21730 (choose f6flpy-x64.zip If you’re running a   
             64-bit system (standard nowadays), take f6flpy-x86.zip if it is a 32-bit Windows, just download and copy them
             into the stick’s root directory) and plug this stick in one of the left side USB ports.
    2.)    You’ll need Win 7 on either a DVD (plus external drive, for sure) or (bootable) USB stick
    3.)    Connect your drive/stick (with W7) to the right side USB port.
    4.)    Switch the computer on, immediately hit FN and F2. That will open the BIOS.
    5.)    In the BIOS, navigate to the very right section (“save and exit”) and navigate the cursor to “load setup defaults”.
             Hit enter to approve.
    6.)    After that, go to the “boot” tab and disable UEFI-boot.
    7.)    Next, go one more tab to the left and set the controller setting to RAID (NOT AHCI or Compatible!!!).
    8.)    Navigate the cursor down to “Intel Rapid Start” and hit enter. A submenu will pop up-
    9.)    Disable the first entry in that window, that will make the rest be disabled as well.
    10.) Navigate to the very right tab, this time hit save and exit.
    11.) The PC restarts.
    12.) Immediately hit FN and F12 to open the boot selection menu. Select to boot from your W7 DVD drive or USB
            stick.
    13.) Click yourself through the whole process of installing Windows 7 until the page comes up where you will have
            to select where to install it.
    14.) Click on “load drivers” and after a few seconds your downloaded driver should be there. Click ok to use them.
            Please do this step even if you can see your drives (SSD Disk 0, 32 GB and HDD Disk 1, 465(<-?) GB) as you
            would expect them – otherwise you’re very likely to get an error during the install process.
    15.) Now erase all partitions on both drives and select the HDD as the drive to install W7 to – NOT THE SSD!!!!!
            Seriously, don’t choose the SSD.
    16.) Windows will probably say that some extra partitions are necessary and so on, click ok and install Windows.
    17.) After the installation has finished and you see your Desktop, I suggest you to proceed with the next steps in the
            following order to see as early as possible if you are on the right way.
    18.) Install the Chipset driver, restart.
    19.) Install the Intel Rapid Storage “driver” and check the box where it asks to additionally install the control center.
            Reboot.
    20.) Go into BIOS (FN and F2) and enable Intel Rapid Start (the one you disabled in Step 8 and 9)
    21.) Boot into Windows.
    22.) Click on the Windows button, type cmd and right klick on the cmd.exe, select to run it as Admin.
    23.) Now you’ll create a hibernation partition on the SSD. (which by now should be completely empty as we’ve
            deleted all partitions in step 15)
    24.) In the command prompt that we have just opened, type: (without quotas, for sure)
    “diskpart” and hit the enter button
    “list disk” and hit the enter button
    Now you should see your ssd as disk 0 and your hdd as disk 1
    If your ssd is disk 0 (that would be standard), write “select disk 0”, otherwise write: “select disk 1”, and hit the enter button.
    Now write “create partition primary size=4096” and hit enter again. [if you have 4GB of ram, type 4096, if you have 8 GB of ram, use 8192]
    Now write “detail disk” and hit enter to see the volume number behind the volume that we have just created (it is 4 GB or 8 respectively, should be easy to find), in my case that was “2”
    Now type “select volume 2” if your 4 or 8 GB volume has number 2 as well, otherwise use the number you found out in step f. Hit enter.
    Finally, type: “set id=84 override” and hit enter for one last time.
    It should now say back that the id has been set successfully.
    Exit the command prompt. (close)
    25.) Reboot
    26.) Install the Rapid Start driver. Reboot.
    27.) Open the Intel Rapid Storage Application.
    28.) Click on accelerate and approve the settings. Two RAID’s will be created. Reboot.
    29.) Install the remaining drivers, have fun with Windows Update and that’s it!
    Good luck to all of you… And hey Lenovo - wouldn't that have been your job after all these posts showing your costumers in trouble? Just my two cents...
    If you want, you can now turn on UEFI-boot in BIOS.
    PS: If, after installing all drivers, you happen to see one unknown device in your device manager – this one belongs to Lenovo Connect Software that came with your Laptop. (Updates FB, Email etc when PC is in sleep mode) If you install Lenovo Connect it’s going to be fine, however, I would not recommend it as it is said to use a lot of energy and cause some other problems. So just live with it, your PC is totally fine without it.
    Kind regards from Shanghai

    Seriously guys, I can't use my 3 days old laptop. Some help would be mostly appreciated. At this point, the network connection issue doesn't show up anymore, it's just a blank screen after reboot. I reinstall windows and do it all over again just to achieve the same result.
    Now couple of things caught my attention: as I load the "6flpy-x64.zip" driver from step 14, I get a message saying I need to install signed drivers, because unsigned ones are likely to mess up the system.
    Secondly, I could not find any Rapid Storage Technology drivers for Windows 7 (particularly for U310 model), so I use the Windows 8 ones (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS031455), which seems a silly thing, yet I know of no alternatives.
    Could it be any of these issues to cause my problem? Or smth else? Please help!

  • What is the diffrence between cookies and cache, is it safe to remove cache?

    what is the difference between cookies and cache , is it safe to remove cache ? . I had cleaned cookies many times but I have not removed cache , does it goes on increasing day by day ? please let me know

    Cookies are small files that contain information useful to a web site -- such as password, preferences, last date visited, etc. You may remove the cookies that you don't want adn since some of them are a privacy issue, many people remove them all.
    Cache is just a collection of data downloaded to help display a web page. After you leave a site, much of the cache is left on your computer and is no longer needed. You can always remove the cache because it will be replaced as needed.

  • I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work.  When I go to internet the screen is grey??? please help I am a new user!!

    I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad.  When I did that twice, it did not work.  How long does it take for the clear history to work?  I am a brand new
    user of the ipad2 and I am disappointed that this is happening already.

    Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad?  Are you at home trying to connect through your home router?  If you are at home, did you put your home routers encryption code as your password?  The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers.  Let us know......

  • How to restrict 'Broadcast and Export' option of BW report through web.

    Helllo,
    Please anyone let me know, how NOT to give/allow "Broadcast and Export' option in BW report, when accessed through Web.
    Is there is any Auhtorization object which restrictes this option.

    Hi,
    Please check this, it may help you.
    http://help.sap.com/saphelp_nw70/helpdata/en/80/1a68b4e07211d2acb80000e829fbfe/frameset.htm
    Regards,
    Madhu

  • My first generation iPad suddenly stopped opening Safari.  I cleared history, cookies, and cache, and Safari still won't open.  Any suggestions?

    When I attempt to open a Safari window on my first-generation iPad, it opens to a blank screen.  I can see the web address bar and the search box, but the rest of the page is white.  I cleared cookies, history, and cache, but still nothing happens.  The iPad is 3G, and I have tried to open Safari using both 3G and my home WiFi.  My wife has an iPad 3 WiFi, and hers opens without issue.  Any suggestions on what I might do?  Thanks!

    1. Double-click the Home button to close all Inactive Apps in Task Bar
    2. Hold the Apps in Task Bar down for a second or two until you see the minus sign
    3. Tap the minus sign to close Apps
    4. Tap center of screen to return to Home Screen
    5. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo. Ignore the red slider

  • Error in INTEGRATION_DIRECTORY_HMI and CACHE REFRESH

    Hi guys, well after checking the forum and several blogs i can't get rid of my problem!
    I have a problem concerning INTEGRATION_DIRECTORY_HMI and CACHE REFRESH.
    i wanted to get a file from a FTP-Server via CC and i got error:
      <SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
    Because of this i tried to update my cache (SXI_CACHE). When i do a Delta Cache Refresh i get:
    Prefix Number: entry missing for system SSID client 100.
    When i do a complete Cache Refresh nothing happens at all. I also checked the cache notification in IB - Integration Directory where i fin dout that only the Integration Server (ABAP Cache) won't refresh. Well status is started but nothing else is happening.
    Then i checked the RFC INTEGRATION_DIRECTORY_HMI, did a connection test where i get an Internal Server error.
    Let me tell u that the systems runs very well in the last days but now i have no clue what might be wrong.
    Can somebody please advice me? I already read all blogs concerning this and also did a complete system-restart....
    br Jens

    when you check INTEGRATION_DIRECTORY_HMI with SM59 it is normal to get
    HTTP Response 500 - Internal Server Error. In this case it meens everything OK
    see the rediness check, that is attached to SAP note 817920
    when you start the complete cache refresh, you can see
    the function module SAI_CACHE3_REFRESH_BACKGROUND in SM58. As long as you can see this entry, the cache
    refresh is ongoing. If the refresh takes too long and runs on an error, try to specify another timeout in INTEGRATION_DIRECTORY_HMI or in the ICM
    Best Regards
    Alexander
    Message was edited by:
            Alexander Wrobel
    Message was edited by:
            Alexander Wrobel
    Message was edited by:
            Alexander Wrobel

  • Issue with Information broadcasting and pre-cal server in SAP BI

    Hi Experts,
    I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
    I have 20 employees every month I need to send workbook via e-mail from information broadcasting.  The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
    because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
    I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
    like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
    Below log In pulled from pre-cal server
    Can you please tell what could be the problem.
    Successful job
    3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
    2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
    3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
    3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
    xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
    3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
    3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
    3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
    3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
    3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in  thread 3
    3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
    3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
    IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
    3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
    3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
    3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
    DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
    3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
    3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    3/11/2011 9:31:44 AM (0) -> Excel based operations  finished.
    Failure job
    3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
    TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
    3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
    3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
    .xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
    3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
    3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
    3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
    3/10/2011 10:23:44 AM (1) -> PID of Excel process:  "2544"
    3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
    3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
    3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
    BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
    3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
    3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
    3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
    A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
    3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
    3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECQB
    2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECQB
    Thanks in advance
    Narendra

    Hi Ravikanth,
    Thank you very much for the reply
    I went into RSPRECADMIN and clicked on 'Display Current Queue'.  There we have 3 sections
    1) Queue Overview of Open Precalculations
    I can see this section is always blank after running IB also
    2) Queue Overview of Current Precalculations
    In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
    If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
    Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
    3) Queue Overview of Proccessed Error-Free Precalculations
    All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
    I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
    Can you please help me further to trace the error.
    Thank you
    Narendra

  • Problems in SLD and Cache refresh (SXI_CACHE).

    Dear Experts,
    I am facing SLD and Cache refresh problems in PI 7.0 on HP-UX.
    1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
    2) SLDCHECK : Log says No Business System for ABC Client 100 ".
    where ABC=SID. Business System INTEGRATION_SERVER_ABC is declared in SLD and client 100 is assigned.
    My question is : Is this a BASIS or DEVELOPER issue? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
    SLDCHECK Log Snippet:
    SLD server access settings:
    host name: ABCXIDEV
    port number: 50000
    user : PIAPPLUSER
    Use transaction SLDAPICUST if you wish to maintain the SLD server access data
    Launching the SLD GUI in a separate browser window...
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call terminated sucessfully
    List of business systems maintained in the SLD:
    INTEGRATION_SERVER_ABC
    ERP_DEV_100
    Calling function LCR_GET_OWN_BUSINESS_SYSTEM
    Retrieving data from the SLD server...
    No corresponding business system found for system ABC client 100
    => Check and maintain the SLD content for the current client

    Hello,
    Since this is an PI system, your XI consultant must have created/will need to create business systems in SLD for the scenario to work properly. This error is because it cannot find the business system.
    You cannot point out the fingers on Basis or XI and say that it is THEIR issue. Please consult with the consultant who is doing the XI interface and check if the business systems he require are properly created in SLD. If not, create them or ask them to create it (if they are allowed to..).
    From the error, what i can see is that you have defined an integration server INTEGRATION_SERVER_ABC in SLD . the XI interface is checking the required business system in the integration server INTEGRATION_SERVER_ABC in SLD but cannot find it over there. Please check the integration server INTEGRATION_SERVER_ABC in SLD and talk to the XI consultant and you will be able to fix this with their help.
    Hope this helps you..
    Regards,
    Jazz

  • Broadcast and point to point server in the same port

    I'm trying to set up a system where I can send point to point messages via sockets to certain ips, send broadcast messages to every pc in the network, and also be able to listen for point to point messages and broadcast messages, all in the same port. I've been able to establish a point to point connection using the Socket class to send the message, and using the ServerSocket class to listen for messages, but I can't seem to get broadcasting to work.
    I read somewhere that for broadcasting one should use the DatagramSocket class. The problem is i'm not sure which ip i'm supposed to specify when I send the message. Also, do I need a special listener to listen for broadcast messages, or will the ServerSocket listener work for that?
    This is what I have for the broadcasting part:
    String msg = myId;
    DatagramSocket sendSocket;
    sendSocket = new DatagramSocket(Constants.COM_PORT); // 4567
    InetAddress group = InetAddress.getByName(Constants.BROADCAST_ADDR); // "192.168.1.1"
    DatagramPacket dp = new DatagramPacket(msg.getBytes(), msg.getBytes().length, group, Constants.COM_PORT);
    sendSocket.send(dp);
    sendSocket.close();
    Thanks in advance
    Diego

    It worth mentioning that UDP/broadcast and robust do go together easily.
    - UDP does not guarantee delivery. i.e. messages can be dropped and you won't be told. Lost packets are not retransmitted either.
    - UDP can fragment packets if larger than 532 bytes long.
    - UDP packets can arrive out of order (though I have never seen this myself)
    If your receiver is under load/busy it can miss many packets if its buffers overflow.

  • Google calendar is getting the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." I have tried disabling cookies, clearing cookies and cache but that didn't work.

    Google calendar is getting the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." I have tried disabling cookies, clearing cookies and cache but that didn't work.

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    * http://kb.mozillazine.org/The_page_is_not_redirecting_properly

  • Tables in which Read mode and Cache settings are stored for Bex

    Hi BI Experts,
    We have a requirement for which we need to know the tables in which the read and cache modes are stored(locally and globally) when we change them in the query properties(In T code RSRT) of a query
    Thanks in advance
    Regards,
    M
    Edited by: madhu marupudi on Feb 5, 2009 5:30 PM

    Hi,
    Check in the following tables, these are related to Reports tables.
    RSZELTDIR Directory of the reporting component elements
    RSZELTTXT Texts of reporting component elements
    RSZELTXREF Directory of query element references
    RSRREPDIR Directory of all reports (Query GENUNIID)
    RSZCOMPDIR Directory of reporting components
    RSZRANGE Selection specification for an element
    RSZSELECT Selection properties of an element
    RSZELTDIR Directory of the reporting component elements
    RSZCOMPIC Assignment reuseable component <-> InfoCube
    RSZELTPRIO Priorities with element collisions
    RSZELTPROP Element properties (settings)
    RSZELTATTR Attribute selection per dimension element
    RSZCALC Definition of a formula element
    RSZCEL Query Designer: Directory of Cells
    RSZGLOBV Global Variables in Reporting
    Thanks
    Reddy

  • Submitting to broadcast and iTunes

    This isn't so much a FCP question as it is a video production question, but with specific needs for iTunes.
    I'm just finishing my first music video for a record label and they will most likely be submitting it for broadcast and also to iTunes. I overheard another editor discussing the proper way to format a video for iTunes and I was wondering what that was. I think he was talking about the info that runs off the top of the video. Run time, artist, record label and the like.
    Can someone give me a quick rundown of what info I need to include, and the timing? Do I need a 2 pop if it's just a Quicktime? Color bars, tone, countdown?

    What format is the exHD, HFS+?
    Vista prefers NTFS or FAT. So you'd probably need some software that lets Vista read HFS+. Or consolidate it onto a different exHD that is FAT-formatted.

  • Bbc homepage not loading, even though I cleared cookis and cache. Any advice on how to sort this problem?

    I have FF version 4. The BBC home page will no longer load, though I can load other BBC pages such as BBC news. I don't know why it won't load and I just get a blank white page - t loads in safari fine. I have cleared cookies and cache but it makes no difference. Please advise on next steps for trying to sort.
    thanks

    Are of your purchases done under a single Apple ID/iTunes Account?  Perhaps this article can provide a resolution.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    B-rock

  • Are the fonts installed with the Mac OS OK to use for commercail use? ie, a logo which willbe used for packaging, TV broadcast and internet.

    Are the fonts installed with the Mac OS 10.6 OK to use for commercial use? ie, a logo which willbe used for packaging, TV broadcast and internet.

    srjeffgr wrote:
    Some font foundries require extended licesnes for different uses.
    You're welcome. Again, as mentioned in that discussion, you can use Font Book to check if the foundry has entered any license limitation notices in the font info (Preview > Show Font Info).
    Basically, fonts are code. The copyright applies to the code. If the product you distribute doesn't include the code, then the copyright does not apply to it. That's why embedding has to be dealt with specifically, because embedding fonts in a document means including the code or parts of it in the document.

Maybe you are looking for