Broadcast report for publishing to a file server

Hello,
I have a report that shows information per employee. This report has to be automatically refreshed on a monthly basis and must generate one pdf file per employee number.
I've developped the report on Report Designer and now I would like to publish it to the broadcaster.
I have then 2 issues:
- Why don't I see an option in the broadcaster to save my report into a file server ? Which option shall I activate to see that ?
- Is the pdf file name customizable ? How can I do to specify that the file name must be the employee number ? (the number I mean is the employee unique ID).
Thanks a lot for your help,
Benoit

Hi,
Broadcasting the report to the Portal is like saving the report in the server.SO you can use "Broadcast to the Portal" as Distribution Type and broadcast it.
The name of the PDF is customizable with only the predefined set of entries,which you can able to see,when you click the Value Help of it.
Rgds,
Murali

Similar Messages

  • The report I published on the SQL server report server is not showing in the application we use to retrieve reports.

    The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
    Thanks.

    Hello Roger Tenn,
    Thank you for posting in the TechNet Forum.
    As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
    https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
    The professionals here will be glad to help you.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission"  it even does it when I am just trying to export to my external hard drive to save the file

    I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission"  it even does it when I am just trying to export to my external hard drive to save the file

    Thanks!!! I had same error (with -49) and the mac had an external hard drive attached.. and it was doing a backup.  Stopped, disconnected and the project exported!

  • Best setup for a non-Mac file server?

    I have a dual xeon server, with a SATA RAID5 I want to use as a file server in a cross-platform environment.
    *What I've tried and the issues...*
    At first I considered using Windows 2003 (Win2k3) but Services for Macintosh (SFM) is an older version of AFP and thus only supports 31 character filenames. With all our Macs supporting SMB/Samba/CIFS and Apple touting that "Macs and PCs can co-exist harmoniously on the same network" I figured I would give that a try.
    SMB doesn't work.
    Sure I can create a connection, but transferring files is a completely different story. I'm trying to backup application and system data, but companies such as Adobe and Apple have named some of their files with special characters that can't be transferred over SMB. I know NTFS doesn't support these characters, but I though a Linux box using SMB would work fine. It doesn't. It's the protocol which keeps me from transferring the data. I end up with the lovely error message of "You cannot copy some of these items to the destination because their names are too long or contain invalid characters for the destination..." (what's sad is, if you google for " because their names are too long or contain invalid characters for the destination" you only get 6 results.)
    So I thought I would give NFS a try. Apple says "Viewed from Mac OS X, [connecting via NFS] is just like connecting to an Apple or Windows server." No. It's not. NFS shares don't even show up in the Finder's Network listing. There are also a pile of other hurdles which are only tackled by savvy, command-line using users.
    So that leaves me with AFP. Win2k3 doesn't support filenames longer than 31 characters, and Win2k8 is dropping SFM altogether. Off to choose a *nix flavor, but that requires Netatalk. It hasn't been updated in years, it has many bad performance reviews... and most distros have removed it. I can download and install it. Oh, but that requires I get the kernel source files. Then I have to create an RPM an that's not working... now I'm several levels deep in trying to figure out how to get Netatalk working and I'm not even sure it will work.
    *What's the best setup for a non-Mac file server?*
    FreeNAS seems promising, but it's in alpha/beta and they have all sorts of warnings regarding potential data loss. Sure there's ExtremeZ-IP, but I really don't want to spend $675 do something Apple claims OS X can already do. I can put just about any non-Mac OS on this thing... what's the best way to set it up so it works?
    Thanks much.

    Rick may be right because although i didnt think of it before i tend to have notoriuosly long classnames for my php classes and i have used samba on occasion (when rsync is out of the question for one reason or another) and never had a problem. I use kubuntu (feisty at the moment )with an ext3 filesystem. if i have a chance this evening ill give it a try and see what happens.
    You could also possibly use FUSE to use an ssh filesystem for the shares... i don tknow how that would figure in your back up though.
    Also if worse comes to worse you could tar or dmg the the necessary files... just some thoughts.
    Ill be interested to know what you end up implementing....
    OH one last thought... Compile Darwin from source and use that as your server

  • Crystal Reports for Eclipse - Using .csv files?

    I recently installed crystal reports for Eclipse and much of the basic CR functionality seems to be there, but then I added a .csv file as an ODA flat file data source and I can see it in my "Data Source Explorer", but can not seem to drag it into my report to actually use the data.  Am I missing some basic step?
    Thanks,
    Chris

    Hello Chris,
    I recommend to post this query to the [Crystal Reports Design|SAP Crystal Reports; forum.
    This forum is dedicated to topics related to the creation and design of Crystal Report documents. This includes topics such as database connectivity, parameters and parameter prompting, report formulas, record selection formulas, charting, sorting, grouping, totaling, printing, and exporting but also installation and registering.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all Crystal Reports Design queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • SQL query/report for "count of specific file type"?

    I figured this would be a good first post, as I have found every question I have had to date by browsing the forums, but I am stumped with this one. I recently expressed some concern to HR regarding the use of...lets call it "unauthorized content"
    on our network. Getting little to no response, I would like to produce a report containing a total count based on specific file type. For example, how many .mp3 files are stored on company equipment, how many torrent files (sadly, this is true), etc.
    Having very basic knowledge of SQL, I am puzzled where to start. I am currently using SCCM SP3 and SQL 2008 R2 with both basic reporting and SSRS enabled on the site.

    You'll first need to inventory those file types then here's some reports for you.
    Get the pstreports from my skydrive, import them and you can cange the file type to mp3 or whatever you need. I monitor mp3 files too.
    http://cid-6a8d30f2bc0666d0.office.live.com/browse.aspx/SCCM%20Custom%20Reports
    John Marcum | http://myitforum.com/cs2/blogs/jmarcum/|

  • Screen Needed for mac mini as file server?

    I have two pb I want to network together through a mac mini. Do I need a display for the mac mini to run as a "file server"? I'm new at networking, and I want a place where I can share files with other co-workers w/out using more space on either of our computers. Any help is welcome. Thank you.

    The first response you received in this thread was spot on...I just want to add another option to consider.
    You can find very inexpensive, network-capable external enclosures on the web (check out dealnews.com). Just toss in a good-sized hard drive (the last 320GB I bought from newegg.com was $115)...hook up one of those enclosures...and boom, you have NAS (Network Attached Storage). No computer to update or support...just simple, effective, and fast network file storage.

  • How to use quota on a desktop folder for all users with File Server Resource Manager.

    Hi there,
    I'd like to know if there is a posibility to use variables in the path with File Server Resource Manager if you want to set the quota.
    The path I'd like to use is d:\home\%username%\desktop.
    Like to hear from you all if there is a solution or workaround for this one :)
    Thanks for your time.
    Ben.
    Ben van der Meer

    That's a question about Automator, so I'd pop that one here
    http://discussions.apple.com/forum.jspa?forumID=1339
    Regards
    TD

  • Recovery points and consistency checks are failing for one disk on file server. Access is denied (0x80070005)

     Good day! I've built a new DPM 2012 R2 server and migrated or re-created jobs from my older 2012 SP1 DPM servers as trying to upgrade them was not working out. The DPM R2 server is running great besides this one issue. The problem is with a file
    and print server at a remote office. Since it has around 750 GB of user data on it I chose to do manual replica creation on the data disk, (E:) but created the C:\ drive replica normally, over the WAN. The manual replica creation was successful, and the initial
    consistency check and recovery point creation worked as expected, however, since then it will not create another RP or run a CC on the E:\ drive. Recovery points on the C:\ drive are being created properly. When I try to run a CC I get this error: "An
    unexpected error occurred while the job was running. (ID 104 Details: Access is denied (0x80070005))" I've tried to drop protection on the two directories of the E:\ drive (retaining data) and re-create, but that didn't help. I've even done a recovery
    from the initial RP to verify that it was created properly, and that worked as well.

    Hi,
    Access Denied error is usually caused by Antivirus software.  Please disable real time scanning on the DPM Server for DPMRA process. 
    928840 You receive job status failure messages in Data Protection Manager
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;928840
    For DPM 2012 the path has changed.
    To resolve this problem, configure the antivirus program to exclude real-time monitoring of the Dpmra.exe program on the Data Protection Manager server. By default, the Dpmra.exe file is located in the following folder:
    %ProgramFiles%\Microsoft System Center 2012\DPM\DPM\Bin
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Report for all checked out files

    is there a way to get a report of all files in Version Cue that are checked out?

    You should ask in the Version cue forum.

  • 2012 R2 - Clustering High Availability File Server

    Hi All
    What's the difference between creating a High Availability Virtual Machine to use as a File Server and creating a 'File Server for general use' in the High Availability Wizard?
    Thanks in advance.

    Hi All
    What's the difference between creating a High Availability Virtual Machine to use as a File Server and creating a 'File Server for general use' in the High Availability Wizard?
    Thanks in advance.
    What's your goal? If you want to have file server with no service interruption then you need generic SMB file server built on top of a guest VM cluster. HA VM is not going to work for you (service interruption) and SoFS is not going to work for you (workload
    different from SQL Server and / or Hyper-V is not supported). So... Tell what do you want to do and not what you're doing now :)
    For a fault-tolerant file server scenarios see following links (make sure you replace StarWind with your shared storage specific, I'd suggest to use shared VHDX). See:
    http://technet.microsoft.com/en-us/library/cc731844(v=ws.10).aspx
    http://technet.microsoft.com/en-us/library/cc753969.aspx
    http://social.technet.microsoft.com/Forums/en-US/bc4a1d88-116c-4f2b-9fda-9470abe873fa/fail-over-clustering-file-servers
    http://www.starwindsoftware.com/configuring-ha-file-server-on-windows-server-2012-for-smb-nas
    http://www.starwindsoftware.com/configuring-ha-file-server-for-smb-nas
    Hope this helped :)
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.
    The goal is a file server that's as resilient as possible. I need to still use DFS namespace though. Its on a Dell VRTX server with built-in shared storage.
    I'm having issues getting the High Availability wizard for General Purpose File Server to see local drives :(
    So I'm just trying to understand the key differences between creating one of these and  a hyper-v server with file services installed.

  • Problems with TCL and a IRC File Server

    I am trying to get this File Server running: http://freshmeat.net/projects/tclfserv/
    It requires both tcl and tclx (which I installed from the aur).
    When I attempt to run the fserve, It gives me the following error:
    justin @ rain > ./fserve.tcl phillies.conf
    invalid command name "signal"
    while executing
    "signal trap int "NiceExit {owner said so}""
    invoked from within
    "if {$connected == -1} {
    set argv [join $argv]
    if {($argv == "") || (![file exists $argv])} {error "Bad config file specified! ($argv)\nUsage: ./fse..."
    (file "./fserve.tcl" line 233)
    In the fserve.tcl file, I have the path to tcl listed as /usr/bin/tclsh. The docs for the fileserver say if you get a "signal" error, you should make sure you have tclx installed. Any suggestions on getting this to work, or, any suggestions for a solid IRC File Server?

    Hello Matthias,
    I think, the answer is the note 1025707, which you have already mentioned. The gateway should run under cenadm user, and according to this note cenadm user is:
    "(In the explanations, "CEN" is used as the system ID of the system on which the
    DBA Cockpit runs, and "EX1", "EX2", and so on are used for the external
    systems."
    So if you need to configure DB13 in P01 System, then the standalone gateway on the database server should be installed also under p01adm user.
    This section from the note 1025707:
    "3. Connection through SAP Gateway
    Install and configure a standalone SAP gateway on the host of
    the external database (see Notes 657999 and 927508 for further information). Run
    the gateway under the OS user cenadm (Unix) or SAPServiceCEN (Windows).
    Regards,
    Alwina

  • Migrating from SAP DMS to File Server

    Hi,
    Our client is currently using the SAP DMS to store documents for the EHS module. This has brought with it lot of handicaps.. primarily the huge size of the database. There is an initiative now to move from SAP DMS to a file server where the files would be physically stored whereas the linking would be made via SAP EHS module.
    This effectively means that the things would remain as they were.. only that the specifications in EHS would now be pointing to a new location for its documents.
    My question is whether this is a techinallly feasible solution and second how should the migration be done. keeping in  mind that the linkages should be kept intact.
    Suggestions are solicited... points are guaranteed.
    Thanks!
    Aviroop

    Hi Aviroop,
    Got any idea about how File server works with DMS ?
    I am in urgent need for details about the file server functionality and configuration.
    Can I use a sharepoint site (internet site0 as a file server?
    Pls send me some documents regarding this to my mail id [email protected]
    Thanks in advance and warm regards
    Purnendu

  • Simple file server

    Greeting to all
    A friend of mine has just switched his office from PCs to Macs (3-4 computers). He is looking for a simple Mac file server. All the servers that I see are pretty pricey for his needs. He would like to have something that he could mirror drives for redundancy. Looking at the power mac, the cheapest that I could configure was around 2700. Does any one have any ideas of configuring a relatively inexpensive file server? I am assuming it doesn't have to run the server software, just OS X would do.
    Thanks.

    Although I have never used one myself, the NetGear ReadyNAS series seems to be a popular product.
    http://www.netgear.com/Products/Storage/ReadyNASNVPlus.aspx

  • App File Server connection error when trying to run a BI Publisher report..

    hello Gurus...
    As above - App File Server connection error when trying to run a BI Publisher report.. FOR THE FIRST TIME.
    What does our DBA need to do..?
    error message reads..
    Template code: SUARXASR
    Template app:  AR
    Language:      en
    Territory:     GB
    Output type:   EXCEL
    [5/10/10 10:59:27 AM] [UNEXPECTED] [46321:RT1487572]
    oracle.apps.fnd.cp.util.RemoteFileException: An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_*****.ac.uk. There may be a network configuration problem, or the TNS listener on node FNDFS_*****.ac.uk may not be running. Please contact your system administrator.
    at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:241)
    at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:194)
    at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:130)
    at  oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:264)at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [5/10/10 10:59:27 AM] [46321:RT1487572] Completed post-processing actions for request 1487572.I'm sure we never had to set anything up in our Test instance!??!!??
    many thanks for looking..
    Steven

    nobody experienced this before..?

Maybe you are looking for