Broadcast Video Solution via Optical

I was advised of an application that is for broadcast quality video leaving the US bound for Canada.They have OC-48 hubs around the US in NYC, Seattle, LA and maybe Chicago.They need to equip the Hubs with L2 & L3 devices. What Cisco device would one recommend as switch/router to support this application?

There are a wide range of devices that you could consider. It would depend on your requirement and the cost. I would suggest that you go in for modular routers so that you can add modules based on your needs at any point of time. Some switches can also perform L3 functions and would be a good choice.You can take a look at the products and also the various solutions available by clicking the products and solutions tab on the cisco homepage.

Similar Messages

Problem with broadcasting video via Skype?

I have a new 11 inch MBA and logged into a Skype session and got audio, though it would not broadcast video of me. I logged out and logged back into a new session with the same result, I had to enter a Skype session with my Macbook Pro because it wouldn't work.
Anyone have any ideas on this?
Thanks.

Hi Rusbug,
I am having the same issue with my iPod Classic 160gb not playing video on the TV via Composite cable as you posted in march!
did you get a solution for the issue??
desperate to know what to do next.
thanks

'12 Mini to Older Receiver via Optical - Can't get 5.1 Surround

Yet another "Can't get surround sound via Toslink" question...
System:
2012 Mac Mini
Video to Sharp HDTV via HDMI
Audio to Pioneer VX-D608 Receiver via Optical
I have the cables connected properly. Video is flawless. Audio is being transmitted to the receiver, which "sees" an AC-3 or DTS signal and automatically switches into those modes according to the format encoded with the files. But for some reason, I am only getting sound out of the front speakers.
I have tested the receiver and all (5.1) speakers are functional.
It is as if I am only sending the front right and front left signals via AC-3 or DTS.
I have spent about 40 hrs playing with various audio software arrangements, including Plex, VLC, Perian (AC-3/DTS passthrough), Soundflower and Soundflowerbed routing.
Currently, in Audio MIDI Setup I am using the "Built-In Output", set to Encoded Digital Audio. The Format appears to switch depending on the file I am playing. The speakers can only be configured to Stereo, none of the surround options present themselves, which I understand is OK because the AC-3 or DTS is passed to the receiver via an encoded stereo signal.
My VLC player is playing an AC-3 or DTS track, and the output is set to the Built-In Output (Encoded).
As I mentioned, the receiver "sees" DTS or AC-3, but the sound won't come out all 5.1 speakers even though I know they are functioning.
Any help is appreciated.
Thanks!!

If the receiver is seeing an AC-3 or DTS signal, it indicates
that the software is passing through the encoded audio.
These streams cannot be altered or manipulated, especially DTS
which is a very tightly licensed codec, by the software or the Mini.
So, if the receiver is seeing the digital audio as AC-3 or DTS, the problem is
not with the Mini.

Music Import via optical connector

Hi,
I tried to get the old music stuff from my minidisc player imported via optical cable, because I wanted to keep the songs separated in multiple files. However using the optical connection the entire minidisc is imported as one single entire "song" (file). Okay with audacity I can separate the files manually but this a quite poor solution. Any ideas?
Thank you!

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
-Griff W.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver. This only occurred on the rented video and on recorded shows on my cable DVR. previews and other content on Apple TV are fine. Any ideas??

Previews and trailers do not contain 5.1 audio.
If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

Video Chat via Playbook PIN's, having problems...

I have two Playbooks on OS2.0 sharing the same Blackberry ID. I'm trying to use Video Chat via Playbook PIN's and I'm not having any luck. Call attempts fail with "The person you called is not currently available".
- both Playbooks have Accept Calls On
- both Playbooks are on the same home wi-fi network, i.e. same router
- the router has firewall enabled (Toggling off the firewall doesn't seem to help and I'd rather have it on. Skype works from the desktop computer with firewall on.)
- in Contacts, both Playbooks show each other with green video chat icons. Turning off Accept Calls will actually change the state of the video chat icon to gray, as expected. (The state change doesn't update immediately, but after a failed call.) This tells me that the Playbooks are talking to RIM's servers?
- I'm not getting the "A Firewall is preventing Video Chat from connecting" or "Unable to Connect to Server" error messages. http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB26845 This leads me to believe that the Playbooks are able to see RIM's servers?
- Some people have reported that putting the Playbook in the DMZ (DeMilitarized Zone) of the router works, but it's risky security-wise (The Playbook is open to the general internet.). My router only allows for one IP address in the DMZ, which isn't useful with my two Playbooks.
- The alternative to DMZ is port forwarding, which is more secure. My router only allows specific IP's to be used and since the Playbook IP's are dynamically allocated, setting this isn't helpful. http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB26816
Could someone with two Playbooks sharing the same Blackberry ID's please try to use Video Chat via Playbook PIN's and report whether it works or not? I'd like to isolate out whether it's a problem with Video Chat or my router/home wi-fi.
Thank you!

It won't work since they have the same blackberry ID.
I have tried many time and it won't work. Only the playbook that last connected to app world can use video chat.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Latancy via optical

Hi!
I have a Apple TV 2 and recently I got a D/A-converter so that I can get the ATVs sound in my stereo via the optical out.
The problem is that there is an annoying latency where the sound comes after the picture. It's possible that this is caused by the D/A, 'cause it was quite cheep, like $40 or something.
Can this be resolved in any way, or do I simply have to buy a more sofisticated D/A?

Could the sound be coming before the video?
A common AV issue is with modern TV sets that have a few 10s of msec delay before they show the video due to the time needed to perform various video processing techniques - so if you are playing audio via optical lip sync is out as the video is delayed.
Ideally when you have such a problem, you would need an amp or Dac that allowed alteration of delay.
I'd try a variety of material too in case it's the encoding in a particular video.
AC

Unable to upload video files via iframe in safari version 3.0

I m not able 2 upload video files via iframe in safari 3.0.
i m facing this issue when i try 2 upload a video file via an iframe.
file gets uploaded properly if i m not using iframe to upload the same.
this issue is seen only in safari version 3.0 and not in the newer version i.e (3.2.1)
do anyone has the asnwer for this problem.....???
would be thankful to him/her...

Are you using a BT Home Hub with the IP Phone attached. This holds onto the SIP port that iChat uses. There is no way to get the router to release this port.
I had to return it all to BT as unfit for purpose and switched to Eclipse!

My niece is getting married in England. We are in the US. Is there a way to broadcast her wedding via the iPad or chat or Skype or FaceTime so that everyone can watch on their computer?

my niece is getting married in England. We are in the US. Is there a way to broadcast her wedding via the iPad or chat or Skype or FaceTime so that everyone can watch on their computer?

Yes, if they use one program, Skype allows few sound connections simultaniously

Satellite C50-A-15L: unable to play music or video files via media player

Hi all
I am having problems with my media player and explorer functions all of a sudden - it seems to have occured after a recent 'important update' (always causes more issues than fixes).
Anyway, since this update, I have been unable to play any music or video files via the media player or cut and paste any items when sorting files out.
All fine previously, but now when I highlight and click 'cut', the timer cuts in and the window goes straight to 'not responding'. Drag and drop works OK, then going back to delete files.
As for media files, double click one and no response, right click and 'open', again, nothing...
Anyone else experienced similar problems?
Of know of a fix or patch?
Many thanks
Matt

From my point of few you have no problems with notebook but with Microsoft system.
"Hotmail" isnt Toshiba product.
If you have problems login the Hotmail account, you should contact the Microsoft support for help.
By the way: you can always set the system back to early time point before you received any updates.
Windows 8 creates a restore point for you automatically during Windows Updates and other system maintenance events.
Open charm bar (Win key + c), choose Apps and search for Restore Point. Then click on Settings. On the left hand side you will see the option called Create a restore point.
New window would open. Within the System Protection tab choose System restore.
Clicking on Next would lead to next step where you could restore the computer to the sate it was before the selected event (windows update).

Can't get sound on video links via Facebook etc?

I can't get any sound when trying to watch a video link via Facebook. Can anyone advise?

Here is an article from the apple support website that might help out.
http://docs.info.apple.com/article.html?artnum=302588

Video output via FW deck

Running on MBP in the field, can I monitor Color video out via FW connected to DVCPro deck then out to NTSC monitor? FCP outputs fine. In Color the video output selection is greyed out... jPo? Shane?
Thanks

Thanks.
That's too bad, it'd be nice to show some options on set with a basic FW interface... wouldn't wanna schlep all that gear around...

Video output via cable - incompatible with video p...

I find that although video output via cable from the Nokia 6220 classic (and I presume other Nokia phones) works fine with TV sets, I haven't found a single video projector that accepts the output and is able to project it. The projectors typically search their video inputs and should recognise the composite video input, but instead they just keep searching and are never able to recognise or project the video.
Is there something unusual about the video signal output from it so as not to be accepted as composite video by video projectors?

iphone4 and composite and component cable don't support mirror so they
only display images when an supported app is being used like youtube or the video app and the likes
use both the composite and the component cable with my iphone4 on 5.1 and both works fine
so do my ipod touch with 5.1 and ipad2 with 5.1

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

Hello twrate,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iMovie '11: If iMovie doesn’t recognize your camcorder
http://support.apple.com/kb/PH2146
Best of luck,
Mario

IIS7 configuration, blocked broadcast video stream from third party host

I have a client that recently replaced a windows server 2003 with windows server 2008 R2 as their webserver. This was a big change to IIS7. An application that I developed for them has stopped working and I believe this is related to the IIS7
configuration. The application uses SilverLight technology to display a broadcast video along with some powerpoint slides.
Here is the URL going to the server from a link on an html page.
http://iiscast.wlf.org/vod/broadcast/sctr01/0/start.html?media=http://iiscast.wlf.org/vod/broadcast/unit2.asx
The iiscast.wlf.org is the public name for the IIS server. When we click on the link it does properly display the start.html content but fails to connect to the video stream. The video stream is hosted by a third party and the contents of the
unit2.asx file has the url for that video stream. When a put the
http://iiscast.wlf.org/vod/broadcast/unit2.asx portion in IE it does properly display the video stream on mediaplayer.   All this worked prior to moving to the new server. When I use F12 in IE to debug this, I see a brief message appear
in the debugger that it is opening unit2.asx. After that the debugging is very limited except I know I’m getting an exception in the silverlight and the video doesn’t display.   Other similar Silverlight apps on the same server that display
archived video are working.
Here is the content of unit2.asx
<asx version = "3.0">
<Title>Unit2 Bdct</Title>
<entry>
    <ref href = "http://easylink.playstream.com/winlive/wlforg2.wvx"/>
</entry>
</asx>
Playstream is a video stream hosting company. When someone links to them, it pulls the video stream from my clients media server broadcast point.
wlforg2.wvx contains the link back to the media server broadcast point at my client.
We have a lot of connections going on but keeping in mind that http://iiscast.wlf.org/vod/broadcast/unit2.asx will display the video and
http://iiscast.wlf.org/vod/broadcast/sctr01/0/start.html?media=http://iiscast.wlf.org/vod/broadcast/unit2.asx
Is not displaying the video although all this worked on the old server.
My guess is that something in the IIS7 is blocking this process.
FYI the old server completely died so I can’t look into its configuration which was done in 2004 by someone else.

This was entered in the iis.net forum as suggested. The problem has been resolved. The hosting service determined they had an edge server that was faulting. Their edge servers were automatically assigned by geography which meant
that depending on how/where we accessed the system for troubleshooting we used a different edge server. Hence some tests always failed and others always passed. FYI the hosting service had this problem for over a month and did not detect it
themselves. Fortunately we connected with a dedicated service technician late on a Saturday night and he figured it out.

Broadcast Video Solution via Optical

Similar Messages

Maybe you are looking for