Broadcasting a Message using PI

Hi everyone,
I want to configure the following scenario.
I would name the Scenario as Broadcast
The requirement is 1 Sender and Multiple Receivers (for Eg: 3 receivers) both would be file formats for example
About Broadcast
Broadcasting means publishing information to masses. The characteristic of any broadcasting scenario is that the sender cannot make any assumption who will listen to the message.
XI will supervise the broadcast and allow configuring the scenarios according specific needs.
For example a message may have a life-time, so the broadcast should be visible for a certain period and then automatically removed. Another possibility would be that we allow a pre-defined or calculated number of receivers (in our case 3 receivers) to read the message; in the simplest case it means that the sender is looking for one agent to process the message but there are several Receivers to choose from.
Any Inputs would be appreciated. Do I require BPM's for the Scenario.
Regards,
Varun

Check out the scenario "pub and sub scenario's using XI" on the Netweaver How to sessions in the Events section.
XI by default does not support publish and subscribe scenario's but with a API available for configuration for Integration directory objects, every time a subscriber list is updated, the ID objects can be programatically created in XI leading to the ability to support pub and sub scenario's.
The API's are available, but the framework and GUI screen's etc to maintain these pub sub scenarios though would need to be created by you as you would understand after you go through the above mentioned presentations.
Hopefully sometime down the line, there would be better GUI based support but for now most of it is upto the developer to do.
Regards
Bhavesh

Similar Messages

Why can I send email from my iPad, but my iMac which is connected to the same modem keeps telling me that it can't send the message using the same server?

I have an iPad 2, connecting via Wifi to an Actiontec Q1000 modem. The iMac (3.06 GHz Intel Core 2 Duo, 4 GB 1067 MHz RAM, running OS 10.8.2) is also hard wired to the same modem. Internet access is via CenturyLink. Main email is from Shaw cable in Calgary (Phoenix is a vacation property), not through CenturyLink.
Can receive email on the iMac, but every time I try to send, I get a pop up saying "Cannot send message using the server .......". Further prompts me to verify the address in the email, and SMTP settings in Mail preferences, or to select a different outgoing mail server. I've tried using a number of servers, always the same result.
Using same settings in both devices.

Mail is not my forte, but what I noticed was that you have Centurylink and presumably have your Mail set up with their settings? But then you mention Shaw/vacation property/etc - you can send out email only through the server that you have set up as an account using the ISP you are using. If you switch places, do you have separate accounts set up with both Centurylink and Shaw so you can switch and use whichever one you're at? A Phoenix ISP won't work with a Mail POP account unless you're in your home - Phoenix - area.
Do you have a data plan with your iPad? That would explain why that works - it'll function sort of like a cellphone - works anywhere where there are signals.

"cannot send email message using the server icloud" on 10.6.8

I use mail from my desktop, not from iCloud on the Internet. I have a MacBook Pro with 10.6.8 Snow Leopard. My mail was working fine until yesterday.
It says "Cannot send message using the server iCloud. connections to the server smtp.me.com on the default ports timed out. Select a different outgoing mail server from the list below.
The list has:
ICloud offline
and Icloud
Neither of them work.
What has Apple changed regarding this in September?
(I know others have posted similar message, but they were on 10.7)

Same problem here.
Recently an @icloud.com version (alias) of my existing @me.com email address appeared on my account. I can still send messages form the OSX build in Mail client as long as I am using the @me.com version of my email, but I do get this message when I try to use the new @icloud.com account.
My account with iCloud states that both @me.com and @icloud.com versions of my email are active.
Would be nice to know if this is a temporary problem of if this is a permanent one.
The settings on the outgoing mail server are default as retrieved from apple when I configured the @me.com email for the first time. I went through the troubleshooting suggestions as provided on Apple website, double checking all the settings, no joy. At the very list I can still use the old @me.com alias with no problem (for now)
MacBook Pro / Mountain Lion 10.8.2

"Cannot send message using the server....."

Hi all,
Considering the nature of the problem I am about to relate I would have to say at the outset that I would be very very surprised if other people have not come across this problem, so here goes...
We have around 60 users of Apple Mail from both 10.4 and 10.5, so varying degrees of versions of Apple Mail however most if not all are updated to 10.4.11 and 10.5.2.
We have been plagued with people being frustrated about emails bouncing back with an immediate error which is basically the following...
"Cannot send message using the server smtp.xxx.com:user
Sending the message content to the server failed.
Select a different outgoing mail server from the list below etc etc"
I am sure a lot of you have seen this error.
However, it is totally random but I am at the end of my tether with it. It generally revolves around emails with attachments and can be totally random. I was trying to send a screenshot today, very small screenshot, using the Apple-Shift-4 technique, sent the .png file, then saved it out as a .jpg, nothing. Tiny file, around 5k. Got the error above, took it out, sent no problem. Other similar files on the desktop refused to send but a .pdf did. I then thought it might be our server, so sent teh same attachments using my .mac account. Same result and failed to send. Reports from other users in our group show that they too get random results, maybe moving the attachment in the email makes it go, sometimes putting it before your signature, sometimes putting your signature copied and pasted in so many times makes it work, all sorts of methods but all resulting in the same conclusion, Apple Mail can be very unreliable.
We have even migrated some users to Entourage and the problem disappears. Even to Thunderbird, but those users miss the search capability as it is quicker and more reliable. So they want to go back.
Considering I have been struggling with this issue back in the day when we were on the Apple Mail related version in 10.4 I was hoping that the version released in 10.5 would remedy the problems. Sometimes I feel it has just got worse.
Is anyone else experiencing this sort of difficulty in Apple Mail, I really feel isolated and at a loss with how to remedy this for so many users.
If anyone can share their experiences and how they have got around similar issues in Mail I am all ears and open to any suggestions.
Thanks everyone for taking the time to read through this. There is more but the experiences are so random it is not worth trying to put it all down.
Thanks again.
Gerry McCoy

I went in to Connection Doctor and. oddly enough, for this Mac account it said I was on Port 25. Si I changed it to Port 587 and saved the changes.
Still, I have the same problem with the same error messages.
I go back to the mail preferences > Accounts > Advanced and it shows Port 143 still there grayed out.
What about SSL - it's not checked.
Odd that this problem only seems to be from one .mac account emailing to another .mac account. Could the server be down?

Cannot send message using the server (null)

i use mail 2.1.
i have a .mac account and have three other email accounts attached to my mail account.
lately, i cannot send any email.
the switchiing ports fix hasn't helped either.
this is the error message:
CANNOT SEND MESSAGE USING THE SERVER (null)
The server response was: 5.1.0 <email [email protected]>...
From address does not match authentication.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
Message from: email <[email protected]>
Send message using: [there is a combo box here with all the four accounts servers listed]
no matter which one i pick it doesn't work and no email is sent.
anyone have this error before? or now how to fix it?
i'd be appreciative.
thanks
1.67 GHz Power PC PowerBook G4 Mac OS X (10.4.6) Sony HDR HC3 HD HandyCam MiniDV

I was having a similar problem (don't feel like typing all the details)
I was about to to delete my com.apple.mail.plist, when finally it hit me.
I ran ethereal (again, I'm sorry, but learning how to use ethereal is a topic unto itself). Following the TCP stream (ie. looking at the smtp messages being sent back and forth) I came across two problems. For some reason my port number was set to 567 or something like that, when it's supposed to be 25, as I had originally set it to.
Once I corrected the port number I started receiving an error message from the smtp server. It said the return email address could not be authenticated. (using xyz.com as an example) The correct return email address was supposed to be [email protected], but for some reason it was changed to john@xyz in the account settings.
Anyway, to get to the point, another thing to check is that your return address has been set correctly, and if all else fails, make sure you have X11 installed and use fink to install and run ethereal. This will let you know if you are actually connecting to the server, and will show you any error messages.
PS. I think this problem started occurring with the last update made to mail. I believe it somehow corrupted my settings. This would explain how my port number could have been changed to the default port number of .mac mail.

OSX Mail - Cannot send message using the server ....

Hi there,
Mac Pro with OSX 10.6.
*Can receive mail, but can no longer send email* using the program Mail.
Been getting the popup "Cannot send message using the server [shawmail.vc.shawcable.net] for the past 3 days. I hadn't changed anything about my computer, and have had the Mac for 2+ years. So this just started doing it on it's own.
I had a technical support guy from my service provider even interface with my computer, where he could see my desktop right over the internet, and he couldn't get it fixed either.
I googled this problem, and found solutions like:
1. Uncheck "Use SSL" (Done that, and it was never checked "on" to begin with)
2. Make sure Authentication is set to none, with no password (done that, and it wasn't set with a password to begin with)
3. Delete [user]/Library/Preferences/com.apple.mail.plist (done that, didn't do anything)
4. We even totally deleted my account, and started a new fresh one. Didn't work
The tech support guy did show me a way to email online, using the same email account. That worked, but it's a hassle to go onto a web-based email program -- it's not my preference. So, with great certainty, it's not my service provider, because I was able to send emails on this web-based email program using my email account.
So there, I'm stumped.
Hopefully someone can help. What's bizarre is that googling this problem, I have found many other people that say it happens arbitrarily, out of nowhere.

I can't believe how ridiculous this issue is. i have been searching for days for a solution to this. i have tried EVERY recommendation on these forums and nothing works. It appears that this issue dates back to TIGER. I had this problem back in January and just bagged figuring it had something to do with iweb. I bought a new html program and was able to send out my newsletter last month no problem. Suddenly, one month later- here i am again, unable to send out my newsletter with no help from Apple or verizon, or these forims, or anyone else. To think that a company that I have stood behind and loved so much can't be be bothered fixing such a simple issue that has been going on now through 5 OS's (I am using Lion but I had the issue using leopard as well) is a disgrace.

Message uses a character set that is not supported by the internet service

Does any one have any advice on how to fix this problem?
E-mails sent from my iphone 3G periodically arrive in an unreadable form at the recipient. The body of the e-mail has been replaced with the message "This message uses a character set that is not supported by the internet service...." The problem e-mails also include an attachment that contains an unformatted text file containing the original message surrounded by what appears to be lots of formatting data that is displayed as gibberish.
This occurs sometimes, but not always, even with the same recipients. I am sending e-mail through a G-mail account that is configured on the iphone using IMAP. I have tried the gmail account to use the two available formatting options for mail, but neither fixes the problem.
I have also upgraded to 2.01 and restored a few times without impact.

Hi,
I got somewhat similar problem with special charecters(German umlaud �,�,�..).
I create a file with java having special charecters in it. Now if I open this file I am able to view the special charecters in it.But If I attach this file send it using following code then receiver can not see the umlaud charecters in it.They get replaced by _ or ?
MimeBodyPart mbp2 = new MimeBodyPart();
FileDataSource fds = new FileDataSource(fileName);
mbp2.setDataHandler(new DataHandler(fds));
mbp2.setFileName(output.getName());
Multipart mp = new MimeMultipart();
mp.addBodyPart(mbp2);
msg.setContent(mp);
Transport.send(msg);
From you message it looks like you are able to send the mail attachment correctly(by preserving special charecters).
Can you tell me what might be wrong in my code.
I appriciate your efforts in advance.
Prasad

HT1296 When I send a message on MESSAGES using my iPad2, they do not show up on my iPhone or my MacBook Mountain Lion messages. Did I miss a setting on any of the devices as I thought iCloud took care of syncing all of my devices

When I send a message on MESSAGES using my iPad2, they do not show up on my iPhone or my MacBook Mountain Lion messages. Did I miss a setting on any of the devices as I thought iCloud took care of syncing all of my devices

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
http://www.macobserver.com/tmo/article/messages_why_your_chats_dont_show_across_ cross-device/

E63 - how to reply to a message using 1 click inst...

Dear all,
I would be interested to know how one replies to a text message using 1 click instead of 3, via Nokia E63. The reply sequence that I currently have to follow is
1) click Options
2) select Reply
3) then select Via text message
Is there a direct means to get to the reply window with one click instead of three clicks?
I hope there is one because it takes time and becomes inconvenient to wait.
Thank you for assistance in this regard.
Regards,
S Ahmad
Solved!
Go to Solution.

Hi sahmad7
I tried replying a message in one step but didn't succeed.
The least steps number I was able to do is 2
Before entering the message press Options then reply, and the phone will open SMS writing screen directly.
Other than that, try to get a program that is able to do that.
I hope that helps you, and please let me know
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo

I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

How to Broadcast the message in WebClient

Hi All SAP Gurus,
Can anybody help me on this situation that I want to broadcast the message in CRM Web Client screen/ Status Bar SAP Easy Screen, any how i need to broadcast the message continuously any where in SAP Screen, is it possible to do this or not ? if yes, can u please guide me how to do this. The custom (we can edit the msg) message should continuously display.
If u have any DOCs or PDFs that can be acceptable. I am assure to u I will award the point.
Regd,
Govinda

Probably this should help:
http://help.sap.com/saphelp_crm50/helpdata/en/fb/150deca0c211d6870c000086568e5f/frameset.htm

How do I get my iPad to receive messages using my iPhone number? I could do it before the update.

I have recently updated my iPad mini and iPhone 4S to 7.0.4. Since then I have not been receiving or seeing messages I have received or sent. If I was to dend a message using my phone then I could see it on my iPad as an example. But I cannot now. Any ways to rectify this?

You are probably going to have to sign out of/turn off Messages on the phone and the iPad and then start all over again and enable messages on the phone first so that the number is accessible again to use on the iPad in Settings>Messages>Send and Receive at>You can be reached by iMessages at. You need to be able to select your phone number in there.
This kb article explains it in detail.
http://support.apple.com/kb/HT5538

INVALID_QUEUE_NAME : Error while scheduling message using qRFC

Hello SDNers
We are currently performing our PI 7.1 upgrade and one of our scenario uses a Sender SOAP of the type EOIO. We tried executing this scenario in PI 7.1 XID environment and in it worked fine without any errors but in our PI 7.1 QA environment it is giving the following errors
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SCHEDULE_ERROR</SAP:Code>
<SAP:P1>XBQOC___*</SAP:P1>
<SAP:P2>INVALID_QUEUE_NAME</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while scheduling message using qRFC (queue name = XBQOC___*, exception = INVALID_QUEUE_NAME)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can you please exaplian what could be the issue we are facing.
Thanks.
Kiran
Edited by: Kiran Sakhardande on Oct 22, 2008 4:08 PM

HI Kiran,
Have gone throgh the following link?
INVALID_QUEUE_NAME
Regards
Sridhar Goli

Issue while processing large message using schema exposed as WCFservice

I am using biztalk 2010 and am facing one issue.
I have a schema exposed as WCF service. Used the ecf pubulishing wizard for the same.
When we post a large message using this WCF service it throws http 400 error.
We have isolated the problem to webserver.
Is there a way to update the MEXbindings to set the request message size.
If anyone has faced similar problem before request your help

Hi,
Following settings in the web.config file of the WCF service may help.
<bindings>
    <basicHttpBinding>
        <binding
name="basicHttp" allowCookies="true"
maxReceivedMessageSize="10000000"
maxBufferSize="10000000"
maxBufferPoolSize="10000000">
            <readerQuotas
maxDepth="32"
maxArrayLength="100000000"
maxStringContentLength="100000000"/>
        </binding>
    </basicHttpBinding>
</bindings>
HTH
Sumit
Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question

When I send a message using iMessage to a contact's email, the message (whether independent or to a group) is being delivered in their email inbox instead of their iMessage application.

When I send a message using iMessage to a contact's email, the message (whether independent or to a group) is being delivered in their email inbox instead of their iMessage application.
Is there any resolution to this issue?

Yes, they are registered for iMessage and IOS 5.0.1 update. A few days ago (10-12 days) the group messaging was working fine, but now the messages are being delivered to the email inox instead of iMessage app.

Broadcasting a Message using PI

Similar Messages

Maybe you are looking for