Broadcasting query-Broadcast type "Broadcast E-Mail (Bursting)" not found.

Dear All,
I had been going through a number of posts in SDN all of which speak about the setting which gives the options of sending query output via email to selected users based upon say a cost centre one is associated with.
But I cannot see this option  "Broadcast E-Mail (Bursting)" in the distribution type.
I reached the broadcasting screen by Query Designer-> Publish-> BEx Broadcasting.
Is it that a precalculated server setup is required to get this distribution type ?
From what I know, a precalculated server is required only for broadcasting Workbooks and not required for query.
Or am I missing something in getting to this Broadcasting type.
Thanks
Shalabh

Hi all,
I finally found the reason for non dispaly of that distribution type.
"Make sure that you have administrator authorization for broadcasting. You need authorization object S_RS_ADMWB with field RSADMWBOBJ = BR_SETTING.
The Broadcast E-Mail, Broadcast to Portal, and Broadcast to Printer distribution types are intended for all users.
All other distribution types listed below allow users to perform administrative tasks and are, therefore, only available to users with the appropriate authorization"
I have SAP ALL in my sandbox and all the distribution types are available
Regards
Shalabh

Similar Messages

  • Broadcast E-Mail Bursting 'Attribute Value Is' User Name function

    Hello Experts,
    When creating a Broadcast E-Mail (Bursting) setting, our Recipient Determination tab's "Characteristic for Recipient Determination" is set to 'Generate Document with Variable Value'.  Beneath this is the "Attribute for Recipient Determination" field and the "Attribute Value Is" field.  I understand that the "Attribute for Recipient Determination" field comes from, or depends on, what is chosen above in the Variable field.  All of our broadcast settings to date have set "Attribute Value Is" to 'E-Mail Address'.  If "Attribute Value Is" is set to 'User Name', how does that work technically?  What is a sample scenario which would make use of such a setting?  Thank you very much.
    Terri Clarahan

    Hello Experts,
    When creating a Broadcast E-Mail (Bursting) setting, our Recipient Determination tab's "Characteristic for Recipient Determination" is set to 'Generate Document with Variable Value'.  Beneath this is the "Attribute for Recipient Determination" field and the "Attribute Value Is" field.  I understand that the "Attribute for Recipient Determination" field comes from, or depends on, what is chosen above in the Variable field.  All of our broadcast settings to date have set "Attribute Value Is" to 'E-Mail Address'.  If "Attribute Value Is" is set to 'User Name', how does that work technically?  What is a sample scenario which would make use of such a setting?  Thank you very much.
    Terri Clarahan

  • Push Mail item-not-found

    As of today I managed to work out a totally new error with push notifications. In my mail-log the following appears:
    Jan 19 15:01:57 mymachine push_notify[83]: error:
    +<iq id='10009' to='[email protected]/push_notify' type='error' from='pubsub.osxserver.example.com' xmlns='jabber:client'>+
    +<error type='cancel' code='404'>+
    +<item-not-found xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/>+
    </error>
    +<pubsub xmlns='http://jabber.org/protocol/pubsub'>+
    +<publish node='/Public/IMAP/osxserver.example.com/portnum/Mailbox/F73DE618-64BA-4967-B51 C-7A989E672914'>+
    <item>
    +<plistfrag xmlns='plist-apple'/>+
    </item>
    </publish>
    </pubsub>
    </iq>
    So my machine tells me that an item was not found, but which one? It looks like I'm just a tiny step behind push....
    BTW I read a lot about DNS. Do I really need to enter pubsub.osxserver.example.com into my DNS? Right now only osxserver.example.com is entered. DNS is completely managed by the same machine.
    Regards,
    Thomas

    That should work okay, I would suggest you enable tracing and post a Trace of one of your requests and responses. That should better tell what's happening
    Cheers
    Glen

  • Location 3110 (type code 1003, system TM8500) not found

    Hi ,
    i am sending some data for TransportationOrderSCMRequest interface via XI to TM system
    XML input data having value of  LoadingLoction - Internal ID 3110 and type code 1003,
    Unloading location Internal ID US-CUST-07 type code 1010
    Message status is XI is sucessful but in TM system (SXMB_MONI)  XML message status is transfer to external system  with follwoing error
    <?xml version="1.0" encoding="utf-8" ?>
    - <n0:StandardMessageFault xmlns:n0="http://sap.com/xi/SAPGlobal20/Global">
    - <standard>
      <faultText>Standard Message Fault</faultText>
    - <faultDetail>
      <severity>error</severity>
      <text>Location 3110 (type code 1003, system TM8500) not found</text>
      <id>477(/SCMTMS/TOR)</id>
      </faultDetail>
      </standard>
      </n0:StandardMessageFault>

    Hi Amit,
    To check whether the location is present in TM (And I am referring to TM 8.0), open NWBC (either using t-code NWBC or launching your locally installed version).  Select Master Data - Transportation Network - Define Location.  Enter the values from the error message into the Location and Location Type fields and hit display.  If it is not there, you will need to CIF it over from your ECC system (or you could create it in TM, but recommend CIF).  The t-codes to CIF it over are CFM1 and CFM2. 
    Regards,
    Mike

  • Cannot log into yahoo e mail, 404 not found comes up

    cannot log into yahoo e mail 404 not found comes up. I deleted the version of firefox I had and downloaded a new version. Same, unable to log into yahoo e-mail, 404 not found. I deleted recent history, same

    '''@cheruvim''' - Are you able to laod yahoo! mail on other Web Browsers ??
    Firefox cannot load websites but other programs can
    * https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can
    No programs can load websites
    * https://support.mozilla.com/en-US/kb/No%20programs%20can%20load%20websites
    Check and tell if its working.

  • [SOLVED]mail command not found

    What package should I install to get the mail command working?
    I used it to check my cron mails but doesn't work anymore.
    keerthi ~ $ mail
    bash: mail: command not found
    Last edited by keerthi (2008-02-04 17:57:07)

    You want mailx or the alternative heirloom implementation (in community, I believe)

  • Broadcast by Mail - Bursting

    Hi,
    For a characteristic, Example, customer, E-mail ID is an attribute.
    In this case, the user selects the customer in the input variable screen of a report and executes the report, now, he wants to send the report to that customer selected.
    Instead of the user to follow the entire process of E-mail bursting, he wants the Dealer id to prompt in the Receipient field. Is there any provision for this in SAP BI Broadcasting?
    Thanks in advance.

    Any ideas on this please. Or is it possible to create Email group and send the report out to the group as in Outlook?
    Regards
    Kumar

  • Broadcast E-Mail (Bursting)

    Hi,
      Can someone please provide me with a "how to" guide to sending a Broadcast E-Mail using authorizations so that each user can only see the information that they are authorized to see.  We are currently using version 3.5 of the BW.
    Any help would be greatly appreciate.
    Thank You!!

    Hi Tina,
    Email Bursting option is not available in the BW 3.5. It is available with the BI 7.
    Email Bursting is drafting a mail for n users at a shot based on their authorizations.
    For this to happen in BW 3.5. We have to load the master data of the endusers email ID's. and their names. Also there should be authorizations to be built on the users in the master data. Only then this can be achieved.
    Hope this help u with an answer.
    Regards,
    Kishore.P

  • Package javax.mail.* not found

    Hello.
    I've got a problem with a program in which I wanted to use the JavaMail-API. I've added the path of the needed jar-files into the CLASSPATH. But when I compile my application I get the error that the package java.mail.* was not found.
    I've also tried it with the JBuilder5 and then I got the followed error message:
    Error #: 302 : No access on the class javax.mail.Session; class javax.mail.Session was not found in a stable package
    What did I do wrong? Please help me.

    The problem is evident, the class you want to use is not in class path. There is no dilemma over that.
    How can you check that the class is in classpath.
    you can use javap command
    If you are using WIN NT /200o you can use the command
    javap with fully qualified name of the class e.g.
    to find if the class String is in classpath
    ==> javap java.lang.String
    This will print all the methods of the class on the DOSpromt. Similarly you can check
    javap javax.mail.Session
    if it doesnot find the class, the class is definitely not in classpath. You can set the class path as: -
    set classpath = %classpath%;"path of mail.jar"
    if mail.jar is located in say c:\jdk1.3\lib\mail.jar
    set the classpath as :-
    set classpath = %classpath%;C:\jdk1.3\lib\mail.jar;C:\jdk1.3\lib\activation.jar
    Now check with javap it is working now and now you can compile you code.
    Hope this helps

  • Navinokr: Mail configuration not found

    navinokr: Mail configuration not found

    Check with your e-mail provider about the settings you need to setup e-mail on iPhone.
    Set up an account. Go to Settings > Mail, Contacts, Calendars > Add Account. If you’re setting up an iCloud account, you can also do that in Settings > iCloud.

  • I need a permanent fix for the 'mail server not found' bug (iPad 2 3G)

    This problem started happening on my iPad 2 (3G AT&amp;T) about 2 months ago. I found the fix posted numerous times on this forum> delete your mail applications &amp; reinstall them which I did (deleted &amp; reinstalled both my gmail &amp; yahoo accts). Same problem reappeared about 2 wks later so I repeated the fix. It happened a 3rd time this wk so I repeated this fix a THIRD time before I left town a few days ago. Here I am 3 days later &amp; it's back AGAIN.  FYI...ALL the apps are up to date on my iMac &amp; iPad 2.  Can anyone tell me when the fix for this bug is going to be released &amp; what the work-around is?

    You have to purchase a data plan to use 3G data but you don't have to purchase a data plan for the iPad to work.  You will have full function of the device without a data plan, as long as you have wifi available.
    I also have an iPad2 3G.  I only sign up for 3G service when I need it, i.e. travelling for an extended period.  The rest of the time, I just use wifi at home or whereever I can. 

  • Mail draft not found

    Sorry if this is old stuff but could not find solution - if I "save as draft", number beside box says I "2" but nothing appears in list - like they vanished. I've trashed "com.apple.mail.plist" and set up accounts again, as one suggested, to no avail - save as draft simply causes msg to be gone!
    And, for the life of me, cannot find any preference or mail setting that is used to tell Mail where to save drafts. Also, checked mail servers (2 of them) and no sign of them there. Some guidance appreciated.

    Re-loaded applications from iMac Applications Install DVD and seems to work now but saved 'drafts' still in cyberspace..

  • APPLECARE expired.....how can i troubleshoot yahoo mail server not found

    on Friday, my iPnone 4S will no longer allow me to access my yahoo account.  I reset the password. and reset it in the settings and srill can not access.  My AppleCare has expired.  The phone itself was replaced just a few months ago due to battery life failure.  now, i hace a new device and no way to troubleshoo and rcorrect issue>  I am looking for:    A)  How tp get help from Apple without paying, since the devise itself is new;    B)  Find out what to do from this communities experience without causing further damage to the account or the phone itself.  I should note that yaboo mail CAN still be accessed through the PC, so i assume it is an issue with the settings for the yahoo account or the actual;server access through this partucular iPhone.  PLEASE HELP!  PC is getting ready to crash!!

    You could also delete the Yahoo email account from your phone then add the account back in. That will redo all the settings for the account. Sometimes that is easier than going through all the settings.

  • Mail server not found

    I have set up a enterpirse email account but I get the server is not found.

    Are you using your cellular data network or a business or home wi-fi network?  Do you have internet connectivity?

  • Out put type for simple mail

    Hi Sd Gurus
                 i change the output type  medium from printout to simple-mail. i got a error( Mail partner not found or empty! Obj
    created without partner!). please give the solution.
       Thanks

    Hi Hari,
    Please Check that you assigned any  partner function to the output type.
    and  that e-mail address is maintained for your required  partner.
    Thanks
    Dasaradha

Maybe you are looking for