Broadcasting report views

Hi,
In BI 7.0 is it possible to run a report in web analyzer, change it around, save it as a view and then email busrt the view to users inboxes?
Also we used to be a ble to save views in analyzer 3.5 but I cant seem to find this option in 7.0, is this still possible?
Finally, I recently introduced broadcasting to my users...big mistake. Now they want every slight variation of there reports broadcast. This would of course leave us with enormous amounts of reports being broadcast which may not necessarily be value adding. Can anyone suggest a strategy / criteria to follow to avoid a maintenance nightmare and broadcast overload
Thanks,
Milind

In BI 7.0 is it possible to run a report in web analyzer, change it around, save it as a view and then email busrt the view to users inboxes?
---> You can actually bookmark it and send the user the bookmark which will hold the existing view of the report.
Also we used to be a ble to save views in analyzer 3.5 but I cant seem to find this option in 7.0, is this still possible?
---> Yes you can create and save view in the analyzer.
Finally, I recently introduced broadcasting to my users...big mistake. Now they want every slight variation of there reports broadcast. This would of course leave us with enormous amounts of reports being broadcast which may not necessarily be value adding. Can anyone suggest a strategy / criteria to follow to avoid a maintenance nightmare and broadcast overload
---> obviously, there is would be workload to the system and maintainance won't be that much. If users are connected to the system, then you should teach them how to uses web reports.
thanks.
Wond

Similar Messages

Crystal Report Viewer Session Time out error ( FWM 01002)

Hi,
We are using java 1.4 and Teradata base with BO XI 3.0
I am getting the following error when click on icons (Export, Print, Paging) within Crystal Report Viewer.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Unable to
reconnect to the CMS [servername]. The session has been logged off or has expired. (FWM 01002) [RASLIB9038]---- Error code:-2147215357
Error code name:internal at
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source) at
com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.getLastPageNumber(Unknown Source) at com.businessobjects.report.web.b.a.do(Unknown Source) at
com.businessobjects.report.web.event.q.a(Unknown Source) at com.businessobjects.report.web.event.q.a(Unknown Source) at com.businessobjects.report.web.event.k.a(Unknown Source) at com.businessobjects.report.web.event.bt.broadcast(Unknown Source) at com.businessobjects.report.web.event.ak.a(Unknown Source) at com.businessobjects.report.web.a.q.if(Unknown Source) at com.businessobjects.report.web.e.a(Unknown Source) at com.businessobjects.report.web.e.a(Unknown Source) at com.businessobjects.report.web.e.if(Unknown Source) at
com.crystaldecisions.report.web.viewer.CrystalReportViewerUpdater.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.if(Unknown Source) at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.doPost(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:709) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178) at
If I let the report sit for 30 minutes or so, the icons will work. The u201Csession
timeout error messageu201D is kind of misleading. I have updated the JDBC drivers to version 13.0 for Teradata (terajdbc4.jar and tdgssconfig.jar) and did not see improvement.
Can anyone please help?
Thanks!
Edited by: Yingchiu Ou on May 12, 2010 12:42 AM

I see the viewer, but not the attendant EnterpriseSession nor what the ReportSource is connected to.
Since the error message explicitly states issues with EnterpriseSession lifetime, it'll be good to give the above info.
Sincerely,
Ted Ueda

QSUF (Query string url filter) and SQL Server reporting services report viewer parameters

Hi,
this is my issue:
I have a SQL Server reporting services web part on a page with a report with 1 parameter, lets say it's a client list
Then i have a QSUF that will be used to filter the clients list through the URL
However, once i connect the filter and the report viewer web part, the parameter goes away and is no longer accessible
I'd like to somehow keep the parameter visible, in case there is no parameter sent through the URL, i would like the user to be able to choose a client from the parameter drop down list
I saw that there is a "send empty if no values are passed" option, but i can't seem to get this working properly and i don't know if this option will make the parameter visible again
Any help would be appreciated
Thanks.

Hi,
According to your post, my understanding is that the query string url filter web part not worked well with SQL server reproting services web part.
Did you use the Wiki page layout in your environment?
You can change the page to a web part page, then check whether it work.
There is a similar thread for your reference.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/4d7584e3-8e1a-48bf-9346-32f8cb480dd1/query-string-url-filter-web-part?forum=sharepointgeneralprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Unable to insert sql server reporting services report viewer webpart

Hello,
We are trying to add a SQL Server Reporting Services Report Viewer and when we click add we get the following error message
The file you imported is not valid. Verify that the file is a Web Part description file (*.webpart or *.dwp) and that it contains well-formed XML.
Does anyone know what the fix to this is?

Hi，
The Report Viewer Web Part is a custom Web Part that is installed by the Reporting Services Add-in for SharePoint Products and associated with report definition (.rdl) files that are processed by a Microsoft SQL Server Reporting Services report
server.
To install the Web Part, you must run Setup for the Reporting Services Add-in. You should not install or uninstall the Web Part independently. It is part of the add-in and can only be installed through the add-in setup package. The Report Viewer Web Part
file name is ReportViewer.dwp. It is located in the Program Files\Common Files\Microsoft Shared\web server extensions\15\template\features\reportserver folder and should not be moved to other folders.
To use the Web Part, you must have installed and configured the Reporting Services Add-in and configured the report server for SharePoint integration.
For more information,you can have a look at the blog:
http://msdn.microsoft.com/en-us/library/jj219068.aspx
http://msdn.microsoft.com/en-us/library/aa905871.aspx
http://msdn.microsoft.com/en-us/library/bb522800.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

OBIEE 10g - Unable to see data in the report view with grand total applied

Hi,
We're facing with a strange issue.
We're working on a report view.
We're able to see data when Grand total is not applied on the report. The moment Grand Total is applied, it's showing either an empty table with NULL values or "No Results" page.
Please help.
Thanks in advance.
-Rama

Hi Dpk,
Thanks for your reply.
I included it in the instanceconfig.xml, but the issue still exists.
Couple of Observations
#1 - We noticed this issue when we drill down to the level which has really sparse data.
It works fine when we look at the enterprise wide report.
#2 - Works fine with few dimensional attributes and facts on the report
When we add a fact that doesn't have any value at that level, the issue starts to appear.
Thanks in advance.
-Rama

Cannot Send Email from Crystal Reports Viewer; MAPI:Overflow

I am trying to send a report via email with crystal reports, but i get the following error message:
"The following unexpected error occured while trying to send the report to MAPI: Overflow."
I am using Outlook 2010, Win 7 x64 bit.
Does anyone have any ideas or thoughts?

Yes, it is a 3rd party app that opens Crystal Reports Viewer. Attached are the screen shots I get when try to send the report as an email.
-Dan

Export to text procuding different results between SDK and Report Viewer.

We have a 3rd party app that uses Report Viewer v2.5.991 to generate reports. We use the export to text feature and specify 60 lines per page. This produces a report with 60 detail lines and a footer that comes after the sixty for a total of 64 lines per page.
I am a .NET developer and am using the CrystalDecisions SDK version 13.0.2000.0. I am using the same rpt file and automatically generating the text export using C# .NET. I am specifying TextFormatOptions LinesPerPage of 60. This is producing 60 lines total including the footer.
Is there an option I am missing in my code to produce the desired results?

No such thing as Report Viewer v2.5.991. Not as far as I know anyhow...
Looking at the description of the TextFormatOptions property in the SAP Crystal Reports .NET API Guide:
Gets or Sets the number of lines per page to use when you export to text.
So, it looks to me like the property is behaving as expected. E.g.; it is the 3rd party that does something to get 64 lines per page. Perhaps setting the property to 64 will do the trick?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Closing the Report Viewer causes the application to hang

Hi,
Since a few days we are experiencing some problems with the Crystal Reports viewer. When closing a report viewer in our application, the application hangs for a few minutes. The strange thing is, that it only seems to happen on Windows 7 and Windows 2008 R2 Server.
Our application with the integrated Crystal Report Viewer is running on 2 application servers :
- Windows 2008 Server, versie 6.0 Build 6002, Service Pack 2
- Windows 2008 R2 Server versie 6.1, Build 7600
Crystal Reports version installed on both servers : 12.01.0007.1144
On the 2008 Server, the application works correctly.
On the 2008 R2 server, the application hangs for about 5 minutes while closing the report preview window.
Both server have exactly the same version of Crystal Reports and the same application version.
I'm having the same issue on a Windows 7 x64 (6.1 Build 7600).
I've installed all updates and hotfixes up to SP3 Fix Pack (12.3.3.812 / 12.3.2003.812) but I'm still having the same problem.
We didn't have this problem until a few days ago, so I assume it has something to do with a windows update which only affects Windows 7 and Windows 2008 R2.
Please advice us with a possible workaround, because our application is distributed to a few thousand users ...
Some more debug info :
This is the call of from the main thread when the application hangs :
     [Managed to Native Transition]
>     mscorlib.dll!System.__ComObject.ReleaseSelf() + 0x5 bytes
     mscorlib.dll!System.Runtime.InteropServices.Marshal.ReleaseComObject(object o) + 0x8b bytes
     CrystalDecisions.Shared.dll!CrystalDecisions.Shared.SharedUtils.ReleaseComObject(object obj = {CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass}) + 0x75 bytes
     CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ISCDClientDocumentEvents_EventProvider.Dispose(bool bDisposeManaged = true) + 0x1a2 bytes
     CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ISCDClientDocumentEvents_EventProvider.Dispose() + 0x32 bytes
     CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.DisconnectEventRelay() + 0xfc bytes
     CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.InternalClose(bool bSetupForNextReport = false, bool bAutoClose = true) + 0x10e bytes
     CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Dispose(bool bDisposeManaged = true) + 0xad bytes
     System.dll!System.ComponentModel.Component.Dispose() + 0x12 bytes
     CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.CrystalReports.Engine.ReportDocument.ClearCache(bool clearDocument = true) + 0x9d bytes
     CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.CrystalReports.Engine.ReportDocument.InternalClose(bool bSetupForNextReport = true) + 0x81 bytes
     CrystalDecisions.CrystalReports.Engine.dll!CrystalDecisions.CrystalReports.Engine.ReportDocument.Close() + 0x3f bytes
     SyDelSoftControlLibCrystalReports.dll!SyDelSoft.ControlLib.CrystalReports.cReportForm.Dispose(bool disposing = true) + 0x55 bytes
     SDProjects.exe!SDProjects.GUI.ReportForm.Dispose(bool disposing) + 0x38 bytes
SharedUtils.ReleaseComObject
Kind regards,
Frederic Hoornaert

CrystalReportsDisposeIssue.crpe.Diagnostics.0.log
--> Form3 closed
..\..\src\print\datasource\datasrc2.cpp:535,Releasing subreport data sources,Start Time,"17:39:17"
N/A:-1,Releasing subreport data sources,Elapsed Time,"1"
..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:39:17"
..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"7"
..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"6"
N/A:-1,Closing engine,Elapsed Time,"2"
..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:39:17"
..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"6"
..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"5"
N/A:-1,Closing engine,Elapsed Time,"2"
--> Form2 closed
..\..\src\print\datasource\datasrc2.cpp:535,Releasing subreport data sources,Start Time,"17:39:52"
N/A:-1,Releasing subreport data sources,Elapsed Time,"1"
..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:39:52"
..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"4"
..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"3"
N/A:-1,Closing engine,Elapsed Time,"2"
--> Form1 closed..\..\src\print\datasource\datasrc2.cpp:535,Releasing subreport data sources,Start Time,"17:40:29"
N/A:-1,Releasing subreport data sources,Elapsed Time,"1"
..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:40:29"
..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"2"
..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"1"
N/A:-1,Closing engine,Elapsed Time,"2"
..\..\src\crpe\crpe.cpp:791,Closing engine,Start Time,"17:40:29"
..\..\src\crpe\crpe.cpp:833,Closing engine,Before close engine use count,"1"
..\..\src\crpe\crpe.cpp:858,Closing engine,After close engine use count,"0"
N/A:-1,Closing engine,Elapsed Time,"100017"
CrystalReportsDisposeIssue.crpe.functions.0.log
0xfb8     17:39:17.871          0     PESetUserSessionInfo               0     PEUserSessionInfoW:<StructSize:262><userName:><requestID:22>     IN          21     <==
0xfb8     17:39:17.871     0     0     PESetUserSessionInfo               0     OUT     PEUserSessionInfoW:<StructSize:262><userName:><requestID:22>          21     <==
0xfb8     17:39:17.874          3     PEClosePrintJob     report {657D0ECA-BC6A-4EC6-9476-02B77376E07C}.rpt          0     jobN:3     IN          22     <==
0xfb8     17:39:17.874     36     3     PEClosePrintJob     report {657D0ECA-BC6A-4EC6-9476-02B77376E07C}.rpt          0     OUT     jobN:3          22     <==
0xfb8     17:39:17.913          0     PECloseEngine               0     void     IN          22     <==
0xfb8     17:39:17.913     3     0     PECloseEngine               0     OUT     void          22     <==
0xfb8     17:39:17.923          0     PECloseEngine               0     void     IN          0     <==
0xfb8     17:39:17.923     3     0     PECloseEngine               0     OUT     void          0     <==
0xfb8     17:39:52.421          0     PESetUserSessionInfo               0     PEUserSessionInfoW:<StructSize:262><userName:><requestID:23>     IN          0     <==
0xfb8     17:39:52.421     0     0     PESetUserSessionInfo               1032     OUT     PEUserSessionInfoW:<StructSize:262><userName:><requestID:23>          0     <==
0xfb8     17:39:52.423          1     PEClosePrintJob     report {F2574C5C-00BC-4627-9A05-B8133D6E6F7D}.rpt          0     jobN:1     IN          0     <==
0xfb8     17:39:52.423     15     1     PEClosePrintJob     report {F2574C5C-00BC-4627-9A05-B8133D6E6F7D}.rpt          0     OUT     jobN:1          0     <==
0xfb8     17:39:52.441          0     PECloseEngine               0     void     IN          0     <==
0xfb8     17:39:52.441     3     0     PECloseEngine               1032     OUT     void          0     <==
0xfb8     17:40:29.281          0     PESetUserSessionInfo               0     PEUserSessionInfoW:<StructSize:262><userName:><requestID:24>     IN          0     <==
0xfb8     17:40:29.281     0     0     PESetUserSessionInfo               1032     OUT     PEUserSessionInfoW:<StructSize:262><userName:><requestID:24>          0     <==
0xfb8     17:40:29.283          2     PEClosePrintJob     report {C78FE11F-6465-478F-83AB-49D8F0C6D64A}.rpt          0     jobN:2     IN          0     <==
0xfb8     17:40:29.283     24     2     PEClosePrintJob     report {C78FE11F-6465-478F-83AB-49D8F0C6D64A}.rpt          0     OUT     jobN:2          0     <==
0xfb8     17:40:29.310          0     PECloseEngine               0     void     IN          0     <==
0xfb8     17:40:29.310     2     0     PECloseEngine               1032     OUT     void          0     <==
0x1568     17:40:29.315          0     PECloseEngine               0     void     IN          0     <==
0x1568     17:40:29.315     100018     0     PECloseEngine               0     OUT     void          0     <==

Need to print an SSRS report in a web application to a designated printer without displaying in report viewer

In an asp.net webforms app, I need to be able to print SSRS reports directly to designated printers without displaying them in the report viewer. This needs to occur when I click on a button on the page, and I can use either local or server
side reports. There are 4 different reports, and one needs to be directed to a different printer from the other 3. One of them also has very rigid formatting requirements, so the formatting cannot be altered by the print method. I have
researched this for hours, but all the solutions I have found for doing this are for windows apps, not web apps. Can anybody help?

Hello,
You can try to use the Report Service web service to render the report and send to a printer to print the report programming.
http://printssrsreport.blogspot.com/2011/09/print-ssrs-report-using.html
Summer

Report Viewer Configuration Error

Hi,
I manage a TFS 2010 Server that makes heavy use of Reporting Services, and I have a user that reported the following error
when attempting to open a report in the Microsoft Visual Studio Report Viewer:
Report Viewer Configuration Error
The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Resevred.ReportViewerWebControl.xsd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer,
Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*"
path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer, Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.webServer/handlers section for
Internet Information Services 7 or later.
Has anyone seen this error before, or have any advice on finding a solution?
Thank you.

Hi HealthServices3300,
You can try to install "Microsoft Report Viewer 2010 Redistributable Package" on your server to check if it works for you.
For the web.config info, it's for web application. And I'd like to know how did you create the report, and whether the report is for a web app or reporting service. From the error message and report, seems it's not a TFS issue. If it's SSRS project
issue, please post this issue to
this forum. If it's a report viewer control issue, you can post this issue in
this forum for a professional response. After that, please update this thread with the new thread link. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Slow report viewer/rdlc performance in local mode with Single Sign On

Hi Team,
We have recently enabled Single Sign On to our application and after that our rdlc reports loading got extremely slow.
Please find the below configuration that we are using.
1. Report Viewer 11.0.0.0
2. running rdlc file in local mode (not using Report Server)
3. System.IdentityModel.Services 4.0.0.0
The query behind the reports is returning result in 5-10 sec but report is taking 1-4 min to load (sometimes getting timeout) (as per the complexity of the report).
We have tried a lot of workaound but nothing worked.
i saw performance improvement in reports by addding <trust legacyCasModel = "True" level="Full" /> in config file, But using this we are getting "Dynamic operations can only be performed in homogenous AppDomain" error
in many pages of our application.
Without SSO reports are running completely fine.
We are stucked here and not able to proceed. Is there any issue with the SSO and rdlc in local mode ? Is there any hot fix available for the same ?
Please help !!!
Regards,
Pranav Sharma

This problem is probably related to :
[http://blogs.oracle.com/stevenChan/2010/03/ebs_jre_issues_16018.html]
Oracle problem ID : 1054293.1
Loginpage / Error in Browser for Export and Attachments after upgrading to Sun JRE 1.6.0_18 [ID 1054293.1]
Sun bug : 6927268
ShowDocument calls results in new iexplorer process

Report Viewer and Multiple Data Sources

I know that it is possible to create a report in Crystal Reports using multiple data sources. But is it possible to use just the Free Report Viewer to view a report with Multiple Data Sources?
Our company uses Crystal Reports XI. I do not use the program myself, I am in the IT Department. I have limited knowledge of Crystal and do not do any of the report writing.
If this is possible, and if someone could help me out with what would need to be done, or point me in the right direction of a Knowledge Base or Help Topic that explains this, that would be great.
Thanks.

I believe it can but both data sources need to be set up. Ask a report designer to help you use the Designer to test this and see what is required.

Report Viewer is very slow at first time

Hi,
We are facing very slow when loading the reports.For any search it is taking more time to load the reports.We are thinking issue is due to report viewer control and we are using report viewer control version 10.0.0.0.Could you please let us know how to resolve
this issue.
Thanks,
Vijay

How big id the query? How much memory does the server have? It is possible that an execution plan/data pages of the query was thrown from the cache and SQL Server needs to compile/read the data from disk again.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to set printersettings for the crystal report viewer in SAP BI dynamically

Hello
I have set the URL method for my crystal report and with parameter passing as shown below, it was displaying the crystal report viewer by connecting to the SAP BI 4.0 server with this method.
http://cr:port/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?sDocName=CRLabelParam&sType=rpt&lsSnPrinted=0&lsSsTestProjectNr=1
This URL will be called from Web application by different users, i would like to set the printer settings differently for different users for this crystal report viewer how shall i need to set the printer options?
shall i need to set the printer settings programatically for each user. Please advise me how do i need to proceed.
Thanks & Regards,
Rajeswari.

There are no BI / CR APIs that would do this for you. The way I see it, you'll have to have your own print button and populate it with the correct printer information for each user as they request the report. Of course, alternatively, use the viewer printer button and get the users to choose the correct printer.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How to broadcast reports in pdf format

Hello Experts,
I am running reports on the web and I need to broadcast report via email in the pdf format. I do not see the option of pdf at all in the braodcasting tabl. Here's what I am doing. I right click on the report and click Broadcast -and Export > Broadcast E-mail -> Information Broadcasting tab -> Settings query -> choose the query i want to broadcast -> select the option broadcast e-mail and when I select the output format , it only shows me MHTML, HTML and Online Link to Current Data. But it does not show me the pdf option. We do have the free pdf connected to the sap server. Please let me know what I should do to get it in the pdf format.
Thanks
Sruthi

Hello,
There are two possible reasons for this issue:
1st:
You are using the old BExBroadcaster.
ONLY BExBroadcaster 7.0 is able to broadcast on PDF format.
2nd:
If you are already using BExBroadcaster 7.0, the PDF output format is suppressed.
You can manage this on the following table:
> RSRD_OUTFORM
Check this table and remove the FLAG 'x' on SUPRESS column of PDF OUTFORM.
Best Regards,
Edward John

Broadcasting report views

Similar Messages

Maybe you are looking for