Broadcasting workbooks to a printer or PDF format files

Hello,
I know these are two features not available in the system, but, Does anybody create such a functionality as a "customer enhancement"? May i have some guideline how to develop them?
Thanks in advance,
Gabriel.

thanks a lot.
I had already considered that but unfotunately it seems that it is not possible with KM.
Any other idea?
Thanks in advance,
Gabriel.

Similar Messages

  • Not Able to Print in PDF Format Apex

    we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,
    Can any one please help me on this issue....
    Thanks
    Malleswar

    Hello Malleswar,
    we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,If your scenario with APEX Listener is generally capable of producing a PDF when using a working template, than the error is very likely to be in your template, not in APEX Listener.
    If that's the case, you'll probably find more people with experiences on how to build custom xsl-templates into your APEX application in the APEX forum: {forum:id=137}.
    If you decide to post there (or even if you think it's better to continue here), please provide information on your APEX and APEX Listener version and whether you see some error information in APEX Listeners log when trying your own template or not. If you don't see anything there right now, enabling debug mode will make the log more verbose and probably provide a hint on which part of your template can't be processed properly by the FOP built into APEX Listener.
    -Udo

  • We use a doc template to create a purchased part spec document and then save them as pdf formatted files.  These part spec documents are also appended with the datasheets for these purchased parts.  When we want to update/revise the document, is there a m

    We use a doc template to create a purchased part spec document and then save them as pdf formatted files.  These part spec documents are also appended with the datasheets for these purchased parts.  When we want to update/revise the document, is there a method, using Acrobat, to make those updates to the pdf, or must we go back to the doc template and basically generate a new document?
    Also, our resulting pdf documents aren't searchable.  How can we generate pdf documents that are searchable?  I may want to search for a part value or name within the body of these pdf documents, but currently can't do that...very inconvenient.
    Can you assist?

    Not totally sure about the search issue. A lot depends on how you created the PDF and what is in the datasheets you attached (like are they graphics?). The doc portion should be searchable as long as you used print to the Adobe PDF printer or PDF Maker. For your use, it may be that the print is adequate. However, the result should be searchable (unless maybe you had a form with filled in fields and created the PDF with PDF Maker. I think the form data may be retained in form fields and the fields are not searchable. In that case, a print might be a better procedure. (it would help to know the versions of WORD and Acrobat as well as the exact process you used to create the PDF.)
    If the appended data sheets do not change, then you might try opening the original PDF and then using Replace Pages to replace the file created from the DOC file.

  • AI 3D extrusions - lines / streaks / striations in PDF format file

    OS: Win 7 / 64
    AI:  CS5  15.0.2
    Acrobat: 9.4.6
    I am attempting to create a shaded vertical cylinder using AI's 3D extrusion function.
    When shading is applied to the object, I am getting lines / streaks / striations in the PDF format file when viewed in Acrobat.
    JPG and PNG exports do not exhibit the lines / streaks / striations.
    The error is appearing in cylinders oriented vetically. It is not appearing in cylinders rotated to a non-vertical angle.
    Sample files:
    http://www.ideatoexit.com/images/adobe/cylwork-08-diffuse.pdf
    http://www.ideatoexit.com/images/adobe/cylwork-08-plastic.pdf
    http://www.ideatoexit.com/images/adobe/cylwork-08-none.pdf
    http://www.ideatoexit.com/images/adobe/cylwork-08-diffuse-rotated.pdf
    http://www.ideatoexit.com/images/adobe/cylwork-08-diffuse-rotated.jpg
    http://www.ideatoexit.com/images/adobe/cylwork-08-diffuse.jpg
    http://www.ideatoexit.com/images/adobe/cylwork-08-plastic.jpg
    http://www.ideatoexit.com/images/adobe/cylwork-08-diffuse.png
    Screen shot of Acrobat showing error:
    JPG file:
    Acrobat screen shot of rotated cylinder:

    Monika,
    Monika Gause wrote:
    In print this shouldn't be a problem. On screen it is because of screen-anti-aliasing.
    Unfortunately, this is not the case.
    I received the test prints back and they exhibit exactly the same errors as the PDF file viewed on screen.
    scan files of sample prints from PDF file (sorry for the multiple pages, the test print is too big to fit on my scanner):
    http://www.ideatoexit.com/images/adobe/cylwork-12-testprint-scan.pdf
    http://www.ideatoexit.com/images/adobe/cylwork-13-testprint-scan.pdf
    The effect is reduced by selecting "draw hidden faces," but not eliminated. The number of blend steps also affects the amount of the error that is manifested, but again, does not eliminate the error.
    The only way to eliminate the error is to use the exact same color for both stroke and fill.
    Depending on the shape, that may or may not be an issue.
    The Illustrator and Acrobat product teams will need to fight it out as to which is responsible for the error but from the customer perspective, the error has only one logo: Adobe.

  • How to send a mail in pdf format file in sbwp??

    how to send a mail in pdf format file in sbwp?? and how to read the content of the mail?

    Refer the following link for Sample Program:
    http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm

  • Can' t print a pdf/a file in adobe reader for mac

    Can' t print a pdf/a file in adobe reader for mac

    You should try looking at this document: http://helpx.adobe.com/acrobat/kb/printing-tips-acrobat-reader.html

  • Apps report print on PDF format

    Hi all,
    I want to print my report from apps in PDF format, so can anyone tell me how to print report from apps in PDF format.
    Is there any document ID in metalink or can anyone tell me the complete steps for taking report in PDF format.
    Thanks & Regards

    In the earlier version of apps (before 11.5.10), we used to do it using bitmap reports. Now we can use XML Publisher, it is easier to design the layout in rtf rather than bitmap report (rdf).
    Check Metalink Note: 278727.1 for more information.
    HTH

  • Need help to print in PDF format using Adobe Reader with FireFox and a FileOpen plug-in. Can't get anything to work.

    I am trying to print clothing patterns on my printer and they must be in PDF format. I was told I needed Adobe Reader, a FileOpen plug-in, and finally Firefox Plug-in. I downloaded all of this and I still cannot open anything in PDF format. Thank you Bonita Rainey

    call the same smartform(Function generated from smartform) in your bsp application, get the otf outof it, convert that to pdf and show it. follow your previous thread and check the blog mentioned there.

  • Purchase Order print in PDF format directly to vendor

    Hi Experts,
    I have two requirements regarding PO print out to vendor. I am using release strategy for Purchase Order.
    1. When the Purchase Order is fully approved, a mail should go to corrosponding vendor with PO print out in PDF format as an attachment.
    2. When PO is cancelled (all PO lines are deleted) then mail should go to vendor that PO has been cancelled.
    Please let me know the steps / procedure for these requirements.
    regards,
    Anand.

    Anand,
    Hi again!!
    Are you planning to send an email to the vendor?
    This is possible in many ways..
    1. you could send a normal out put via EDI and the vendor can convert the xml file to PDF at his end
    2. You could send it as a FAx and the vendor can still receive it as a PDF
    3. You can email the vendor in a PDF format
    I am sure you understand how an email is sent to the vendor.. You'd have to work with samrtforms to convert the O/p to PDF or convert the spool to PDF.

  • Smartform Printing in PDF format

    Hi all,
    I am looking to print standard SmartForms in PDF output.
    I have printed a standard SmartForm to the spool.  I convert the spool job to PDF using function module CONVERT_OTFSPOOLJOB_2_PDF.   From this I get a new spool request titled "#####(original spool no) converted to PDF format".
    My Basis team has create a new printer with device type PDF1 which I have used during this function module.
    However this PDF spool shows up as odd characters.  It also does not print as expected, again it prints the odd characters.
    Obviously I'm missing something - does anyone have any suggestions?
    Thanks-

    Within SP01, viewing the spool request, I see the following characters:
    ═䑆ⴱ⸳ഊ◢팍ਲ‰扪
    祰攠⽔祰攱ഊ>
    〰‱〰〠㄰〰‵>
    ‱〰〠〠〠〠>
    ㈰‷㈰‷㘰‷㘰>
    ⽁獣敮琠㜲>
    ਯ䱡獴䍨慲′>
    㔳㠠㔳㠠㠵>    Etc.... 
    EDIT: I note that when I submit this post, the characters change.  I'm seeing 'symbols' mainly, some Asian characters (the form should be in English).
    When printing, it comes out with something like:
    %PDF-1.3
    %aDuE
    2 0 objtype /Type1
    /BaseFont /H00 1000 1000 520 1000 74 1000 0 0 0 0
    /CapHeight
         /LastChar 255
    %Charwid8 592 779 650 650.   etc
    /F002 6 0 R
    Date=(0000000)
    @SAP_OB    End TOA_DARA
    >>
    endob00327 00000 n
    and so on...
    For now we would like to validate the PDF printing before modifying any new print programs to automate the process.
    Thanks-
    Message was edited by: Chad Carter
    Message was edited by: Chad Carter

  • I can not print in pdf format.

    Hello,
    I have Ideapad Y530.And I can not print any doc. in pdf format .I installed Acrobat Proffessional 8 version.
    I used this version in my other all Laptop very well..but I can't do with Y 530.
    Anybudy have Idea? Thanks in advance.
    Solved!
    Go to Solution.

    naresh,
    Try using primo pdf. dowload it from here its free.If you can take pdf's from this program then acrobat must be broken.Try repairing the installation.Go to help and choose the option "repair"
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Printing to PDF - Format A1 with ArchiCAD

    I cannot seem to print to PDF larger than A3. I have added a custom paper size (A1) and also tried installing the drivers for an HP Plotter.
    But regardless each time I try to save my layout from ArchiCAD 10 I can only save as A3 pdf.
    Any help would be great...
    MdW

    Ok, I think I found what needs to be changed, but I cannot set it "permanently" - that's what I need to figure out now.
    When it comes up with the print dialog, I choose Adobe Acrobat as my printer, and then in the print dialog, there is a properties button.  That opens a window and one of the options is labeled "Adobe PDF Page Size" - this seems to default to be blank.   If I set that to "Letter" everything works as I want. 
    So the question is, how do I make "Adobe PDF Page Size" default to "Letter" under the Adobe Acrobat properties?

  • Automaticly print to pdf without file name prompt

    Hi,
    I am building an aplication that uses "Report Generation Toolkit". I am creating a "word" report with a template. After I am done with word creation I want to convert this "word" report to "PDF" format. I need that this process will be an automatic one. I understand that I can use print to PDF software, but the problem with it is that every such software prompts me to choose file name and destination.I need to avoid this.
    Please help me.
    Regards,
    Jenia.

    Jenia wrote:
    ... I understand that I can use print to PDF software, but the problem with it is that every such software prompts me to choose file name and destination.I need to avoid this.
    Jenia,
    There is a lot of PDF software available and some do provide the means to avoid prompts when saving the PDF.   PDFCreator has the advantage of being open source and free, has its Autosave option and had a COM interface added to recent versions. Alternatively you could look at pdf995 which has similar capabilities.  I'm sure there are others.
    =====================================================
    Fading out. " ... J. Arthur Rank on gong."
    Attachments:
    PDFCreator_Autosave.jpg ‏44 KB

  • Problem in Using scanned .pdf format files

    I have an old (5-6 years old) Canon N670U flat bed scanner.  I use it for scanning books of my interest.  It can give each page/document  scan in pdf format directly.  However each scan becomes a separate file lthough serially numbered while scanning.  When I want to read the pages, Next/Previous page or pages Up/Down etc. - reader tools available in Acrobat Reader are not operative.
        I need to go back to each scan file separately.  Also, most of the time, image needs to be rotated.  Though I do it in view mode, it does not get saved in corrected mode-even if I go to "file" and click on "save as".  At each fresh visit, this has to be repeated.
        Present driver of the scanner is version 4. I did get your version 7 downloaded.  But could not install & use it.  Is it necessary that old version first must be uninstalled and only then I can install the new version?  Is it not automatic?  It might have to copy new and remove old software files.
        What should be done that all these individual files (of a single bok) can be combined into a single meaningful folder, with availability/access to all Adobe Reader Tools.  Will be grateful for advice..

    Sharadshankar wrote:
    I need to go back to each scan file separately.  Also, most of the time, image needs to be rotated.
    This needs to be done during the scanning process, using your CanoScan software.  Once the file is saved unrotated, you will need some additional software to do that (Acrobat), so better do it during the scanning process.
    Use the Rotate clockwise / counterclockwise buttons on your scanning software.

  • TIFFs into pdf - Print to pdf - huge file size

    I have 16 pages scanned 11x17 tiff (b&w) images.
    I combine them in acrobat and save the file.
    Comes out ~2.6MB.
    I crop these images to remove black borders, white areas, whatever.
    Then I print to pdf (b&w), Fit to printable area at 11x17.
    With Acrobat 7, the file comes out to ~3.5MB.
    With Acrobat 9 Pro, they come out ~10.5MB.
    Doing the same options with 7 & 9.
    Any ideas?
    Thanks!
    Chris

    Hi Michael,
    I did the settings you just mentioned in the link.
    I got through the First step where the file got processed and 50000 record data got divided into on 50000 idocs.
    But when its is posting this in BW system, then the outbound  status of the message is " Message has error status on outbound side"
    And when i see BW there are no idocs in that system. Is it that the RFC connection between XI and BW had timed out and so it did not got processed at outbound side. Or there is some other setting required ?
    Also, when we tried it with 20 K file then the outbound status is also successful.
    Please let me know how to  resolve this issue .
    Regards,
    Ravi

Maybe you are looking for