Broadcom bluetooth drives installation failed, no bluetooth device was detected.

hello, i have HP Pavilion dm4-3013cl Entertainment Notebook PC laptop.and i am trying to install BROADCOM BLUETOOTH DRIVERS in my laptop and i am getting this error that no bluetooth device was detected. please make sure that your bluetooth device is plugged in properly in order to countinue installation. now i want to say that i lost my recovery disc and after while for heating issue my main hard disk break or not working condition so i just replace hard disk and ofcourse i dont have os so i install fress windows 7 ultimate 64bit in my laptop. and install each drivers provide by HP website i downloaded all drives and installed and my windows 7 is also up to date. i search for this issue allmost one week for solution but cabt fix and i come to know that before insalltion of BROADCOM BLUETOOTH DRIVERS i have to enable bluetooth in HP WIRELESS ASSISTANCE but in my case i think i cant find due to new disk and new os. i can send file or recieve with bluetooth can paired with my all smartphones too but cant listen music in head phones. cant access LISTEN TO MUSIC, i know the reason is only this drivers is not installing properlly and i want to fix it. now i a tired and i dont have time to search and fix it so please help me out from this issue please and sorry for my poor grammer.

fixed !!! now i come to know, the problem is drives which i update it from intel websites, paul you suggest me correct driver for my bluetooth but it is allready in my laptop which i updated before but again i download and install and nothing happen then i reformate laptop and again install all drivers which i downloaded from hp website for my laptop and again update all drivers manually and automaticallu both from intel website and intel utility drivers software and update windows too and i got same problem. cant hear music from bluettoth head phone, so again i reformate laptop but this time i just installed drivers which listed from hp website, i didnt update anything and as you said i didnt install broadcom bluetooth drivers because it is not for my laptop so then i connect my blutooth and try to access listen to music and o m g. it works now i can hear nusic form bluetooth, i dont believe this. but yes it works this forum help other also so thanks paul and have a nice day now i newer going to update my drivers... in pic you can understand that i am not using latest version of bluetooth drivers.

Similar Messages

Bluetooth Driver Installation T440s

I notice also in the documentation that Bluetooth doesnt support the inf installation in the T440 driver pack and needs to be done sepearetly.
The downloadable standalone package suggest silent installation to be run with "autorun /qn"
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS037200
This causes issues because SCCM just happily launches off the autorun and moves on in the task sequence without waiting for a result like a setup.exe or msi would. This means the next installation fails because bluetooth is still running. Or the bluetooth gets interrupted by a reboot if that is next in the sequence
Ive tried running the msi within the package but it doesnt install the Intel Bluetooth driver, in fact device manager shows no bluetooth, eventhough programs/features shows the application install. The setup.exe included in the WIN\IntelBT\Win7\vs32 folder, doesnt work with a silent switch (-s /quiet etc)
can anyone offer advice on the approved way to deploy this ??
win7 32bit
thanks
Solved!
Go to Solution.

Download the package you referenced and you can extract it with this command:
(replace %PACKAGEPATH% with the directory path you want to extract to that already exists)
giww10ww.exe /VERYSILENT /DIR=%PACKAGEPATH% /EXTRACT="YES"
Use the files and folders you get in that path as the source for your SCCM package. Use the following command to perform a silent install:
%PACKAGEPATH%\Win7\vs32\Setup.exe /qn

Dv4-3106tx: Bluetooth driver installation problem

Hi and good day,
Im having a problem with my integrated bluetooth. Before this everything works well until recently I cannot discover bluetooth device, send/receive file. And I confidently, uninstall the bluetooth driver from device manager with intention to reinstall it back using the driver included in C: drive.
However, the problem is when Windows keep install the driver with built in driver that comes with windows. I thought, ooh ok nevermind, I'll just run the setup and it will overwrite and use the Ralink/Motorola bluetooth driver instead.
But that's not the end. When I run the setup, I got this dialog
and I select "Yes, restart the computer now" and click on finish. Then the computer restart and relaunch the setup and again I got this same message again..again and again and again.
So I'm pretty much stuck now. Right now the bluetooth is installed with built in windows driver being used. But I cannot discover, send/receive file whatsoever.
Any help is much appreciated.
Thanks in advance.
This question was solved.
View Solution.

Oh my gosh. I'm completely forgot this thread.
Actually I managed to solve the bluetooth problem by:
1. Getting the driver backup files from my friend. He's using same lappy with me. I asked him to backup the driver using Driver Magician software.
2. I run the driver magician software and do the restoration. Then it requires a restart. Restart the computer
3. Upon restart, I launched the bluetooth driver installation software and it manages to complete the installation without any problem.

Multiple USB Device Driver Installations Failing

Windows 7 64 Bit / MSI P965 Platinum Mother Board
I have three USB driver installations failing. I believe this is related to ' USB', because installations of other software unrelated to USB devices install just fine. Might it be a Windows Installer Service, appears to be running fine?
Failing Device Driver Installations;
1) IOGEAR USB 3 PCIe card
Problem: The installer runs part way through the "Preparing to install' process and goes into limbo. I have tried three USB cards by different manufacturers and get the same problem. Tried several Renesas installers, all failed.
Microsoft Windows Installer says: 'Stopped working. Files that help describe the problem: AppCompat.txt, WERInternalMetadata.xml, WERDataCollection failure'.
2) APC Battery Backup 'PowerChute' Software
Problem: : The installer runs part way through the "Preparing to install' process and goes into limbo -or- I get an error message telling me to check the USB connection. APC cable is pulgged into a native port, not a hub. APC has no solution.
3) Logitech Harmony One Remote Software (Finally installed in 'Safe' Mode
Error: : The installer runs part way through the "Preparing to install' process and goes into limbo, but, when I went into 'Safe Mode' the software installed properly. Installation of the other two examples yield the Windows 'can't be installed in safe mode'
Help Appreciated - IM

To rule out a Windows problem, have you tested with a fresh parallel installation?

Hp pavilion dv2910us No Bluetooth Device was detected.........

Hello........
My Hp pavilion dv2910us
after install windoas 7 when i try to install my bluetooth driver its say
No Bluetooth device was detected.............
i try SP38167 And SP46038 but same error ..............
what to do............. is it driver problem and device problem......?????
Thanks
manoranjan
waiting for great reply

Hi
Please press the Fn & Esc Button you will find the details of what i have asked you i needs the complete model number & Product number so i can check if the Bluetooth cam integrated on your unit.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

SoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot

NSoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot4 I recently moved my X-Fi Elite Pro soundcard to a different PCI slot to accommodate my new large PCIE graphics card.
Prior to moving the card, my?original SoundBlaster install went fine without any trouble. When I booted up after relocating the card,?it was not detected at all. So I uninstalled my SoundBlaster driver software and?rebooted the computer?thinking that was necessary to clear any hardware configuration settings from the old install. This made no difference. I then discovered my card was not seated properly and corrected it.
Next I installed the SoundBlaster driver software. The installation proceeded and finished with a request to restart the computer. Once I did, the computer detects my card and starts the hardware installation wizard asking if I want Windows to search online for driver software. It does not recognize the just installed SoundBlaster driver installation. I have a dual boot setup and this happens in both WinXP Pro and Vista 32 Home Premium.
What's wrong here?

Forget it folks...couldn't wait for any suggestions so I just cleaned off my hard dri've and reinstalled everything. Works fine.

Adobe reader 11 installation fails. error message: there was an error installing adobe reader. adobe

Adobe reader 11 installation fails. error message: there was an error installing adobe reader. adobe reader installation error. null. tried using adobe cleaning tool. using XP sp3. seems that adobe 11 is not completely uninstalling. this is because when adobe reader 11 is removed from add/remove program. when pc is rebooted, adobe reader 11 entry comes back but it is like false entry as no size given. please help to succesfully install Adobe Reader 11. also tried:
1. uninstalled, rebooted, reinstalled 2. installed from different locations 3. removed adobe key from
local machine and tried to install

Seriously, I do not understand what is going on - I have never seen this before!
The MSI installers are usually used in corporate environments to roll out installs on multiple machines. However, you can use it like a normal (EXE) installer; it will just go through fewer steps than the EXE. Not sure if it will improve the situation, but it's worth a try.
Another thing to try is to uninstall these remaining entries using Microsoft Fixit: http://support.microsoft.com/mats/Program_Install_and_Uninstall - also no guarantee, but also worth trying.

Bluetooth driver update failed

System: T430u
I was having a problem detecting a new bluetooth speaker so, Using Lenovo Solution Center, I chose to update my bluetooth driver. Beforef the update, I had run some bluetooth software by double-clicking on the bluetooth icon in my system tray and didn't shut it down, so it was running during the update. I assumed that's why the update failed (couldn't shut down some service whose name I don't remember). After the installation failure there was an option to manually install the driver by clicking on some link (still within Lenovo Solution Center). So I clicked and it seemed to install.
After reboot, there's no bluetooth icon in the system tray and when I check the driver, version it's an old version. The Installation history in LSC says:
"Broadcom Bluetooth Device Software BCM20702 -8[32,64]/8.1 [64] version 12.0.0.5400 Did not install"
But now doesn't give me the option of installing it and I can't find it at the Lenovo support pages for my laptop.
Can someone give me some advice on what to try next?

Restore point in Windows.
Note for future: Lenovo Update does NOT create restore points. You'll need one of your own to roll back in case you don't like what LU does for you.

Bluetooth Stack installation fails

I bought a Bluetooth dongle with the Toshiba Bluetooth Stack. Software installation proceeds normally until the point where it says "Insert the Bluetooth device and click Enter." I do that and the installation stops. I have waited up to half an hour but it never gets past 56%.
I am running Windows 2000 SP4 on an Athlon 1GHz. Plenty of disk space and RAM. Tried the install several times, even tried shutting down the firewall. Nothing makes any difference.
Any suggestions?

Yes, the Vid_0c10&Pid0000 is correct for your device. It is a "Silicon Wave Bluetooth Wireless Adapter".
That it is listed also in the "Exclude from select" in the [ControlFlags] section is also correct.
The message of XP that it is working correctly is a sign that the MS-stack has caught the drivers.
- Open the device manager (Start->Run -> Devmgmt.msc)
- Right-mouse-Click on the second device under "Bluetooth Radios".
The name should be "...Bluetooth ..."
(or an "Unknown device" or Bluetooth device under the Others section).
(- If SP2 is installed then please check also
"Properties -> Details -> Device Instance Id" of it. It should display
"USB\VID_0c10 ..0000...".)
- Select "Properties -> Driver -> Update Driver... -> No, not this time ->
Install from a list or specific location -> Don't search. I will choose
the driver to install. -> Select the not signed driver (driver for your device) ->
Continue Anyway -> No, not this time -> Install the software automatically -> No,
not this time -> Install the software automatically ...
- Now you should find in the Device Manager under "Universal Serial Bus controllers"
a "...Bluetooth ..." device after the installation was finished.

Bluetooth driver installs ever and ever again

Hi,
I am using a T500 (Win7 professional edition 32-bit) and got a problem: Some days ago, I ran the Lenovo System Update Tool, and installed an update of the Bluetooth driver:
"Thinkpad Bluetooth with Enhanced Data Rate Software II for Vista/Win7" Version 6.2.1.800
Download an installation was fine, no errorcs occured.
But since that day, everytime I switch on Bluetooth (either by hardware switch or using Fn+F5), the system installs Bluetooth drivers again... "new devices found, looking for drivers". No error messages, it always ends with "devices were installed, and can be used now".
At the German Thinkpad board, some users reported the same problem. It seems as if has something to do with the Nokia Suite (either Nokia PC Suite or Nokia OVI Suite, I tried both in latest version).
But before I updated the driver, everything worked fine - even in combination with Nokia Suite.
Is there a solution to prevent the driver from installing ever and ever again ?
Christian

Nobody knows ?

BlueTooth driver installation bluescreen "VIDEO_DXGKRNL_FATAL_ERROR" on Windows 8.1 ENT

Dears,
My new Lenovo ThinkPad E440 turns into a blue screen with the error code: VIDEO_DXGKRNL_FATAL_ERROR when im trying to install the bluetooth driver using Lenovo System Update Program or using the downloaded package "Realtek RTL8723BE Bluetooth version : 1.3.769.3"
My OS is: windows 8.1 ENT
From Event Viewer , i can only see this information event
Log Name: System
Source: BTHUSB
Date: 11/4/2014 12:28:43 PM
Event ID: 18
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: xx
Description:
Windows cannot store Bluetooth authentication codes (link keys) on the local adapter. Bluetooth keyboards might not work in the system BIOS during start-up.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="BTHUSB" />
<EventID Qualifiers="16389">18</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-11-04T10:28:43.015337000Z" />
<EventRecordID>3291</EventRecordID>
<Channel>System</Channel>
<Computer>xxl</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
<Binary>00000800010000000000000012000540000000000000000000000000000000000000000000000000E000000000000000</Binary>
</EventData>
</Event>
Best Regards,

Hi Mwahab,
I am glad to hear that your issue has been resolved after uninstalling the graphic driver, and now your query is that you wanted to if your system is shipped with additional graphic card.
Below is the link where you can verify the system hardware configuration by giving the complete system MTM (Machine Type Model) number, if you provide us the MTM number we can assist on that.
http://support.lenovo.com/us/en/products/search
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

S10e "No Local Bluetooth device was detected"

After a fresh install of XP I get this error with my bluetooth. I have reinstalled the driver with the Lenovo driver off the web. Still nothing.
In Device Manager I have a "Bluetooth Bus Enumerator" and an Unknown device.
All drivers have been installed that were provided on the Lenovo website.
Any suggestions would be greatly appreciated.

Hi 3dmb, Fn F5 nothing happens...
but should this menu... the Lenovo Wireless Device Setting Menu
if you install the Energymanagement, you got the onscreen symbols...
... by the way ...
you did a fresh install with XP servicepack 3 hopefully
not a slimline XP as ...no nlited ...fully updated ...
and without yellow mark in the device manager...
otherwise you got unforeseen circumstances...
In Device-Manager go to Broadcom 2046 Bluetooth 2.1 USB Dongle click on it right mouse
in the menu
de-install
and search for changed hardware (should find and reinstall the driver) ...
when no yellow warnings in device-manager... !
....go back to Bluetooth neighbourhood..
.....make your device visible (mobile) .. switch it on (mouse)...
press ...
... search for devices in neighbourhood....
sincerely KalvinKlein
Message Edited by KalvinKlein on 06-21-2009 10:49 AM
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Re: Satellite P100-160 - Display driver installation failed

Satellite P100-160, PSPAAE, vista 32 bit,
Today Aero wasn't working and not available in graphics properties. Installed latest display driver from Toshiba UK site, Intel 15.0.1.1114. This version was actually older than my current driver but I thought that maybe as it was the only one availabel that it must be correct.
The driver install failed with an error (no details just 'an error has occurred'). Now I have no aero and my display resolution cant be set above 1280x800 - should be 1440x900
To say I am pisseed would be an understatement. Can anyone help? thanks

Hey,
If Aero is not available I dont think its display driver problem
Anyway, have you removed the old display driver before you installed the new one? Go to device manager > right click on graphic card > uninstall. After reboot the display driver should be uninstalled and you can start with display driver installation.
If you install drivers make sure you are logged in as Administrator and antivirus/firewall is disabled. Restart once again and you should be able to choose the native screen resolution now.
Check this!!!

Win 7 Blu-Ray DVD driver installation failing

I have a user who just purchased a new HP Pavilion Entertainment laptop Model dv6t-2000. The DVD drive is identified in the Device Manager as "hp BDDVDRW CT21L". The drive appears in Device Manager with the classic yellow icon and the properties list error code 39 as the reason for why Windows cannot successfully start or install the driver. The drive does not appear at all in Windows explorer because it is not installed.
The Recovery Manager has been used to reinstall the hardware drivers but no driver appears for the DVD drive.
I have uninstalled the drive from Device Manager and restarted the system but the problem remains.
I have searched for another source for the correct driver and have found nothing.
The HP website doesn't even recognise the drive name.
As soon as the owner provides the OEM cds, I will attempt to reinstall the driver.
Any suggestions for how to fix this problem would be appreciated.

Hi how's it going, hope ur doing fine.
I am currently experiencing this exact problem and noted the date of your post. [and also the no-response-so-far] Did you ever manage to get a fix for this problem?
I have an hp hdx9313tx notebook pc, that I basically bought to play blu-ray's on. I upgraded from Windows Vista Ultimate x64 to Windows 7 Ultimate x64 and lost blu-ray capability and apparently the quick-play touch buttons don't work properly now either. It still plays back a regular DVD.
When I put a blu-ray in the drive, it seems to get 'read' but when I click PLAY a message pops up that: "VGA Resource is unavailable. Playback is not allowed"
So far hp's Support & Drivers pages are not listing any Support & Drivers for for this model running any version of Windows 7. p/n KU827PA#ABG HDX9200 series
Anyway I hope you did find a way to sort this and look forward to seeing post update from you. Thanks very much from Dave.

Was told that hard drive crashed/failed. Apple support was able to retrieve downloads and docs but none of my pics or video. Help!!

My 2011 MacBook will not boot past the gray screen with the apple. I took it in to Apple and was told that my hard drive failed. The specialist was able to retrieve all of my documents and downloads but none of my pictures and videos, which are the most important. I was told that I would have to send my notebook to a company in California to retrieve my pics and should plan to pay at least $1000-1200 for the service.
Is there any way to get my pics and video aside from the above? How were they able to retrieve all of my other files but no pics? Can the hard drive be fixed?? I would like to replace the hard drive but am afraid to remove it from my notebook for fear of damaging it any further and not being able to retrieve anything else from the drive. Please help!!

Salsgal,
unfortunately, you’ve just found out the most important reason why it’s a good idea to make regular backups of your MacBook Pro’s internal disk. There are other data recovery services; call around and do price comparisons if there’s no time constraint on recovering your data, but as with any other specialist service, you’ll get what you pay for. What Apple was able to retrieve was dependent upon which part of the disk crashed; in your case, it sounds as though your picture and video folders were the ones to suffer physical damage. No, the hard drive cannot be fixed. Removing the damaged hard drive from your MacBook Pro will not damage it further, unless it is dropped, gets wet, or receives a static electricity discharge.

Broadcom bluetooth drives installation failed, no bluetooth device was detected.

Similar Messages

Maybe you are looking for