Broadcom driver not working after system update on 10/10/2014

Yesterday I updated my system (pacman -Syyu) and after rebooting my wireless card is no longer detected by the operating system. I have a 15 inch macbook pro (late 2013) with a broadcom BCM4360 wireless card. It was tough to get working in the first place, but eventually I got it to work with the broadcom-wl-dkms driver. The package is still installed, so I have no idea what to do because I have tried all of the available broadcom driver packages that I know to exist.

Did you rebuild the wireless driver after updating the system? I've never quite figured out how to deal with the dkms variation of the drivers so you are on your own for the correct syntax (surely in the wiki somewhere), but I know that for my BCM4314 with the broadcom-wl driver, every time there is an update to the kernel, I need to rebuild the broadcom-wl driver (even if broadcom-wl itself didn't change) so that the wl.ko module shows up in the appropriate place in the kernel modules directory.

Similar Messages

BannerMaker not working after system update.

Hello all,
I am not trusting Apple now for system updates anymore, because the last couple of updates, after updating my system software, I have problems. I never have these issues with Windows.
Getting to my point, I use BannerMaker (an app created by some Fed agency that I had found googling because Apple doesn't support it as standard, and Windows already had this for years to comply with DOD requirements) to use for a login warning legal note, etc. This goes on to the login window only when you disable the icon/name login. I was in the process of updating it and it told me that the loginwindow.plist wasn't found. I found it on the Spotlight, but I had no way of changing it.
I should also note that after the system update, the login process reverted back to the icon/name login, which never happened. I always require me and another user to type their username because to protect the user's privacy.
How can I get BannerMaker to work again, or how can I get into that file so I can change it and I also want to know if other users had their loginwindow settings mysteriously affected by the update?
I am really disappointed by the lousy updates that paralyzes my security and other issues with previous updates, which I won't get into. I am disappointed with Apple right now.
Steven

I had a feeling that was going to happen. Well I just don't have the patience to do that. Apple needs to go onto the Windows system that you could delete specific updates rather than reinstalling the system software. And I also don't like how updates affect work around apps, how they close them down because they are not authorized software. I need a secure system, and Apple won't let me. **** to screw with them, I might just give my mother my MacBook and I go get a Windows notebook. I had nothing but problems since I got this MacBook.

Excite PRO 3G connection not work after system update

Hello, I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35. After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service". My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me I'm waiting for your help.
Thank you
Regards

This is the forums for Toshiba USA. Unfortunately, we don't have informaiton about your model. You may want to contact Toshiba in your region. You could check the Toshiba Europe forums.
- Peter

Touch screen not working after system update

A few months ago, my laptop (Satelitte P55t-A5202) went through an automatic system update. Ever since then, my touch screen won't work. I followed the directions to reinstall the HDI programs several times. The first time it worked but only for a few hours. The next time I tried to reinstall, it worked for a second. Now reinstalls do nothing.
Before the system update, my touchscreen worked fine. And in reading the forums, this seems to be a common problem with the updates. I called TOSHIBA customer service for help. The FIRST thing they want to do is charge me for tech support because my laptop is out of warranty. I told the customer service rep repeatedly that my touch screen worked fine until the update. He refused to give me any help because I did not want to pay for him to tell me how to resolve...
In my opinion, this is a toshiba issue not mine so regardless if my laptop is out of warranty, Toshiba should take ownership and be accountable for the problems they cause.
Does anyone have any suggestions as to how to take care of this?
By the way, Toshiba customer service representative was rude, you could barely understand him because of his accent, I had to repeat SEVERAL times what my issue was because he couldn't get past the warranty issue and I had to ask several times to speak with a supervisor ( to which he told me a supervisor would call me instead)

See my reply in the laptop forum.
-Jerry

Silverlight and google chrome not working after system update

I just did a system update and now google chrome and the silverlight plugin do not work. I've tried uninstalling and reinstalling both numerous times, restarted, and checked for updates again but nothing works. What's going on?

Check compatibility with their respective vendors.

[SOLVED] Audio not working after system update

Hi all,
About 4 days ago, I installed Arch Linux (full systemd) with LXDE on a Dell Inspiron Mini netbook. Everything seemed to be OK until today, when I did pacman -Syu and then installed the SLiM login manager. After rebooting there was no audio. I am not sure if this happened because of the upgrade or because of SLiM. I am pretty new to systemd, so I could be missing something very obvious. I have tried many things so far, with no success:
1) I disabled SLiM and instead started X from the terminal at boot, and nothing happened.
2) I have removed my username from the 'audio' group, added it again, removed it, etc... No change.
3) I downgraded systemd, systemd-sysvcompat, and xine-lib (just in case) to their previous version and nothing happened.
4) I seem to be detecting the sound card correctly. If I run "aplay -l" as my normal, non-root user I get the same output as the root user:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
5) If I login with SLiM, my session seems to be setup correctly, as far as I can tell:
$ loginctl show-session $XDG_SESSION_ID
Id=1
Timestamp=Mon, 2012-10-29 00:38:35 EDT
TimestampMonotonic=14973592
DefaultControlGroup=name=systemd:/user/vrg/1
VTNr=7
Display=:0.0
Remote=no
RemoteUser=root
Service=slim
Leader=274
Audit=1
Type=x11
Class=user
Active=yes
State=active
KillProcesses=no
IdleHint=no
IdleSinceHint=0
IdleSinceHintMonotonic=0
Name=vrg
6) I reinstalled pulseaudio, pulseaudio-alsa, alsa-plugins, and alsa-oss... Nothing.
7) I do not have the ~/.asoundrc file.
Here is a full list of the packages I upgraded:
[2012-10-28 11:19] Running 'pacman -Syy'
[2012-10-28 11:19] synchronizing package lists
[2012-10-28 11:19] Running 'pacman -Syu'
[2012-10-28 11:19] synchronizing package lists
[2012-10-28 11:19] starting full system upgrade
[2012-10-28 11:20] upgraded linux-api-headers (3.5.5-1 -> 3.6.3-1)
[2012-10-28 11:20] Generating locales...
[2012-10-28 11:20] en_US.UTF-8... done
[2012-10-28 11:20] Generation complete.
[2012-10-28 11:21] upgraded glibc (2.16.0-4 -> 2.16.0-5)
[2012-10-28 11:21] upgraded binutils (2.22-10 -> 2.23-1)
[2012-10-28 11:21] upgraded bison (2.6.2-1 -> 2.6.4-1)
[2012-10-28 11:21] upgraded coreutils (8.19-1 -> 8.20-1)
[2012-10-28 11:21] upgraded systemd (194-4 -> 195-2)
[2012-10-28 11:21] upgraded device-mapper (2.02.97-1 -> 2.02.98-1)
[2012-10-28 11:21] upgraded cryptsetup (1.5.0-2 -> 1.5.1-1)
[2012-10-28 11:21] installed nss-myhostname (0.3-3)
[2012-10-28 11:21] warning: /etc/shadow installed as /etc/shadow.pacnew
[2012-10-28 11:21] upgraded filesystem (2012.10-1 -> 2012.10-2)
[2012-10-28 11:21] upgraded firefox (16.0.1-1 -> 16.0.2-1)
[2012-10-28 11:21] upgraded gcc-libs (4.7.2-1 -> 4.7.2-2)
[2012-10-28 11:21] upgraded gcc (4.7.2-1 -> 4.7.2-2)
[2012-10-28 11:21] upgraded lirc-utils (1:0.9.0-32 -> 1:0.9.0-33)
[2012-10-28 11:21] upgraded lvm2 (2.02.97-1 -> 2.02.98-1)
[2012-10-28 11:21] upgraded mkinitcpio (0.10-1 -> 0.11.0-1)
[2012-10-28 11:21] upgraded syslinux (4.05-7 -> 4.06-1)
[2012-10-28 11:21] upgraded systemd-sysvcompat (194-4 -> 195-2)
[2012-10-28 11:21] upgraded xine-lib (1.2.2-2 -> 1.2.2-3)
More information:
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Oct 29 00:38 by-path
crw-rw----+ 1 root root 116, 5 Oct 29 00:38 controlC0
crw-rw----+ 1 root root 116, 4 Oct 29 00:38 hwC0D0
crw-rw----+ 1 root root 116, 3 Oct 29 00:38 pcmC0D0c
crw-rw----+ 1 root root 116, 2 Oct 29 01:53 pcmC0D0p
crw------- 1 root root 116, 1 Oct 29 00:38 seq
crw-rw----+ 1 root root 116, 33 Oct 29 00:38 timer
$ lsmod | grep '^snd' | column -t
snd_hda_codec_realtek 52245 1
snd_hda_intel 22256 1
snd_hda_codec 83677 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 61470 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 5869 2 snd_pcm,snd_hda_intel
snd_timer 14902 1 snd_pcm
snd 44874 8 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
If I run 'fuser -v /dev/snd/*' I get nothing (blank) and if I run 'fuser -v /dev/dsp' I get file not found. I've also done 'amixer sset Master unmute' and 'speaker-test'. Everything seems OK, except that I can't hear anything!
Any help or suggestions that could point me in the right direction would be greatly appreciated.
Last edited by vrg (2012-10-29 07:25:36)

Thanks Rasi. Incidentally, I just solved the issue a few minutes ago and was about to post the answer, but yes, you are right... the device was muted. It's embarrassing, but it did not seem obvious to me that the device was muted... All the sliders seemed OK, with nice, green values between 50 and 100. Also, the LXDE volume control was unmuted with a value between 50% and 100%, and I ran the 'amixer sset Master unmute' command several times. Clearly, this command does not do the job.
What I was missing is nicely described in the PulseAudio troubleshooting:
If one experiences no audio output via any means while using ALSA, attempt to unmute the sound card. To do this, launch alsamixer and make sure each column has a green 00 under it (this can be toggled by pressing 'm')
I was not pressing 'm'... I know it's on the wiki, but this did not seem to be a PulseAudio issue, which was working perfectly yesterday and was not upgraded, so the PulseAudio troubleshooting was not the first place I looked for solutions. I wonder why the device got muted in the first place.
Thanks again for the help!

Disk Drive Not Working After iTunes Update

Every time i install or update iTunes my computer doesn't read my disk drive. If i put in a disk for music or a game or anything it acts as if its not there. How do i fix this?

I figured it out! It still works, just have to do a different way!
Connect your iphone to your computer
You still have to save the files to your computer.
Save the files to your iTunes ON YOUR COMPUTER
Open "Tones" on our computer iTunes
Select the ringtones you want
*drag the songs a little to the righta bar on the right should open up
*drop the songs to you device
(Just updated to IOS 7, took me a while to figure how to get my ringtones back)

Qiv not work after system update

error message:
zhiwen ~/ qiv /doc/img/1.jpg
Gdk-ERROR **: BadMatch (invalid parameter attributes)
serial 115 error_code 8 request_code 2 minor_code 0
Locking assertion failure. Backtrace:
#0 /usr/lib/libxcb-xlib.so.0 [0xb7b02767]
#1 /usr/lib/libxcb-xlib.so.0(xcb_xlib_lock+0x2e) [0xb7b0281e]
#2 /usr/lib/libX11.so.6 [0xb7c9de08]
#3 /usr/lib/libX11.so.6(XSync+0x25) [0xb7c92ce5]
#4 /usr/lib/libgdk-1.2.so.0(gdk_flush+0x28) [0xb7da0fb8]
#5 /usr/lib/libgdk-1.2.so.0(gdk_image_destroy+0x65) [0xb7da84c5]
#6 /usr/lib/libgdk-1.2.so.0(gdk_image_exit+0x2a) [0xb7da85da]
#7 /usr/lib/libgdk-1.2.so.0 [0xb7d942a5]
#8 /lib/libc.so.6(exit+0xd5) [0xb7b344cd]
#9 /usr/lib/libgdk-1.2.so.0 [0xb7d94386]
#10 /usr/lib/libX11.so.6(_XError+0xd3) [0xb7c97053]
#11 /usr/lib/libX11.so.6 [0xb7c9e72c]
#12 /usr/lib/libX11.so.6(_XReply+0x15a) [0xb7c9eaea]
#13 /usr/lib/libX11.so.6(XSync+0x6a) [0xb7c92d2a]
#14 /usr/lib/libgdk-1.2.so.0(gdk_flush+0x28) [0xb7da0fb8]
#15 qiv(update_image+0x384) [0x804c744]
qiv: xcb_xlib.c:73: xcb_xlib_lock: Assertion `!c->xlib.lock' failed.
Aborted
please help.

Hello,
I have the same error since about two weeks. Today I tried to solve that problem and i found this link:
https://bugs.launchpad.net/ubuntu/+sour … +bug/41056
So to fix the problem you have to do:
export XLIB_SKIP_ARGB_VISUALS=1
It seems to be a problem with imlib1 and the X composite extension..... I don't really know what that means .
For those people all were fine with the versions:
ii gdk-imlib11 1.9.14-32ubuntu1 imaging library for use with gtk
ii qiv 2.0-7 A quick image viewer for X
and personally I have
local/imlib 1.9.15-3
General image handling library for X11 and Gtk
local/imlib2 1.4.0-1
Imlib2 is the successor to Imlib. It is NOT a newer version -- Imlib 2 can
be installed alongside Imlib 1.x
local/qiv 2.0-1
Quick Image Viewer (qiv) is a very small and fast GDK/Imlib image viewer
Perhaps the qiv version is too old. Could anyone help ?

Usb hard drive not loading after security update

usb hard drive not loading after security update
I can't seem to find any other posts about this problem.
I have three external hard rives connect by a USB hub to my iMac.
Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly.
I get the same issue but not all the time if I turn them on before I boot the iMac.
I used the disk drive utility to "repair" the drives but they always come back as "probably ok".
If I restart the iMac with the drives connected (on), it seems to work but not all the time.
A bit annoying as I am wondering if the drives are OK or not.
I don't always need the drives as they are for backing up images from my camera using Apreture.
This all began after i did the latest security update.
is the update to blame?
mahalo.

Yes, you can still use those instructions to reset the PRAM.
You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

Phone not working after OS update, phone not working after OS update

phone not working after OS update, phone not working after OS update

I do have a questiion. I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen. It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!! I have tried holding down the home key and power button several times and the same message continues to appear.

My facetime on iphone 4 is not working after the update to IOS7

Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working after The update to IOS7 Thanks xxx

Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.

Videofunction on iphone 4 is not working after the update to IOS7

Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
Anyone else experiencing the same problem?
Anyone with solutions?
Thanks!

Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.

C1-01 not working after Nokia update

Hi,
C1-01 not working after Nokia update.
Message shows "Updating" then blank screen, any ideas?

How did you start the update? OTA or using Nokia Suite?
Try to run the update through Nokia Suite again.
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

1080p videos not working after fp2 update

some videos are not working after fp2 update..videos which are worked in fp1 also not working after belle fp2 update...it sucks

What is the phone model?
Could you give us the url to the video on question?

Facebook birthdays not working after ios7 update

Facebook birthdays not working after ios7 update?

Did you always have the same problem or is it new? I always used to be able to get Facebook to work on wifi with no issues for months. I downloaded the new software update for Revolution, and all of a sudden it seems like they blocked the Facebook app somehow unless you're on 4G. It really sux because I can't get into my Zynga games either that are tied to FB! Wish someone at Verizon could be aware of this and fix the problem.
Also, interestingly, when I try to log into the Facebook site with the browser I am directed to an error page. The browser works fine for every other site though. Really seems like there was some kind of block instated that will no longer let you use Facebook on a wifi connection.

Broadcom driver not working after system update on 10/10/2014

Similar Messages

Maybe you are looking for