Brochure template right-side edge gets cut off when printed

its horizontal set-up, 8.5x11.0. but on both my printers (both HPs) the right edge gets cut off. how can I manipulate the doc to a smaller size without making the formating go cattywampus?
comments are hidden (that helped a little)

With my DeskJet there is an option to "scale down" a document to fit the page. Do yours offer that?
Also, I apologize if this idea is too hokey, depending upon the nature and extent of your printing project, but would it be acceptable to set up your printer for legal-size paper and then trim the hardcopies?
MacBook Pro Mac OS X (10.4.9)

Similar Messages

Text getting cut off when printing to PDF from Excel

Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy

please delete me from your mailing list. tks.
Date: Wed, 10 Feb 2010 11:20:28 -0700
From: [email protected]
To: [email protected]
Subject: Text getting cut off when printing to PDF from Excel
Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy
>

How do I get my watermark not to get cut off when printing from aperture?

When I export an image that I have put my watermark on and print it the water mark gets cut off in the printing

Aperture should scale watermarks down to fit the exported image. Perhaps it is scaling to one dimension and not both?
Have you tried resizing your watermark? I suggest creating a watermark for each commonly used export size. I use a wide and not tall watermark, in these widths (in pixels):
- 320
- 640
- 1024

Photo getting cut off when printing

I am trying to print a 6x4 photo with my HP Photosmart B8550. Everytime I go to print it, it cuts off part of the picture. I created the picture in Photoshop at 6x4 and saved it as a jpg. In the preview it shows up fine but it is NOT right when it prints. Please advise.

StephF wrote:
I am trying to print a 6x4 photo with my HP Photosmart B8550. Everytime I go to print it, it cuts off part of the picture. I created the picture in Photoshop at 6x4 and saved it as a jpg. In the preview it shows up fine but it is NOT right when it prints. Please advise.
The edges of your image will be cut off by a printer that can’t print all the way to the edges of the paper. In order to prevent this, go to the Image Size menu again and decrease the height by 1 inch (thus also reducing the width). When printed, the image will be centered on the paper. You can also choose “Scale to Fit Media” In Page Setup.
Although I am an HP employee, I am speaking for myself and not for HP.

Image gets cut off when printing tiles

My InDesign file includes an 8" x 28" page containing a full-bleed image that prints as 4 tiles of 8.5" x 11". Whenever I print, the image does not print on the first tile. The foreground text and vector graphics print fine. The image is a PSD, but I've also tried flattened TIFs and JPGs with the same results. Even if I make the page twice as big so nothignbleeds, the image doesn't print on the first tile that should contain the image.
Any suggestions? Thanks

Thanks for the ideas.
I thought about printing from a PDF, but I couldn't find a way to print tiles in Acrobat. I'll see if I can print to tiles as a PDF. I also will see what happens if I place a PDF into the InDesign file, then print that.
I didn't log in as a different user, but I did open on another computer, with same results.
Never heard of .inx, but I'll try that too.
Some new twists:
1) When I flip the page orientation upside-down in the print dialogue box, the opposite happens - the last image tile doesn't print.
2) Today I printed the page at 50% and it worked fine with all image tiles printing correctly.

Titles get cut off when playing after the burn

The title created in the movie are too wide and get cut off when playing it in a DVD player into a TV. Is there a setting I should use before burning?
Any help is appreciated.

You should turn on the TV Safe Area and make sure that everything that you care about is within this area. Anything outside the area is subject to the over-scan of TV sets.

Bottom margin gets cut off when I try to print

bottom margin gets cut off when I try to print

Not being able to check it out on Pages 5 I have tosay how it works in Pages 4 (09). When Show Layout is checked/on you should see a grey border which is the area that the printer can't print on. Do you see a grey boder in your Pages 5?
If you need a smaller margin on your document than the printer seems being able to do check if you don't hae a "borderless" option for the paper sizr you use. You check it in File > Page Setup
Also go to HP and check if there is a newer printer driver if yours has some years on it.
I hope this will help you

Why iphone centre in malaysia always get cut off when i call.

i always get cut off when i call iphone centre on malaysia,
need explaination from centre.

so why are you asking us users? That makes absolutely no sense at all.

Why do my margins get cut off when I right click print, but not when I open my document and print?

When I right click print (without opening the document) my margins get cut off, but if I actally open my pdf document and click print, it will print just fine. This only happens when the document has print that is close to the edge.
I am using Adobe 10.1.2 with Windows 7.
Thank you in advance for your thoughts and help

As for your comment on this being my first Mac, and the program issue, you misunderstood. Yes the eMac is in fact my first, personally owned, Mac computer other than the original Apple II series floppy fed PC, in which me and my father owned. The only other Apple/Macintosh computer I had experience on was my father's 13" MacBook Pro, and 20" iMac (both ran OSX Tiger 10.4.11, just as the one I have know runs). The iMac was upgraded to Snow Leopard due to our need for better picture/video/audio editing software such as that of Adobe, and the Macbook Pro was sold because of a business that was started being siphoned out of money. I purchased the eMac from a small business based off of eBay. It had the majority of OSX Tiger software, only missing minor programs like Photobooth. Other than that, it had no wireless software like BlueTooth, Wi-Fi capabilities, wireless sync, ect... But alas, when you buy a Apple/Mac computer, you must take a few cutbacks when purchasing it (even refurb.) for around $120.00 including taxing, shipping, handling, ect... I purchased nearly all of my software from co-workers and friends who had an extra key, or I would receive the software disc from them, and buy a key. The only "illegal" thing I had on the computer was music I had downloaded from LimeWire. I have never, and will never, trust any software coming from a torrent download site.

Text gets cut off when exported to PDF

When I export my report to PDF some of my text gets cut off where it would meet the right edge of the text box by 1 or 2 letters.
This only happens when I export to PDF through my web application or when I export it throught the Report Manager URL
If I export it on my local copy of SSRS then it shows up fine without the text getting cut off

Hi,
You can set the Cangrow property of the textbox to true which allows to grow your textbox and is default for any text box unless you have changed it.
Please mark this post as Answered if this post helps to solve your query.

CS5 Text still gets cut off when using filters

In Flash CS4, I encountered a strange bug where text would get cut off if there were any filters applied to the text box. I was so excited for CS5, because I had heard that bug was fixed. Now I see that it is not.
I'm using Classic Text in an Actionscript 2.0 file. Here's a screenshot to demonstrate what I mean. The top line is text with no filters applied. The middle line is text inside a movie clip, with filters applied to the movie clip. The bottom line is text with a drop shadow filter applied directly to the text box. Why does it cut off the end of the text???
Has anyone else experienced this?

Hi,
You can set the Cangrow property of the textbox to true which allows to grow your textbox and is default for any text box unless you have changed it.
Please mark this post as Answered if this post helps to solve your query.

Notes cut off when printing, issue with margins

When I print a slide with notes, the notes complete cover the width of the page, flush left and right. My printer cuts the margins automatically (not a bleed), so those portions of the text in the notes gets cut off.
Any way to control the margins, left and right, when printing notes from Keynote?

Keynote print layout is a bit of a mess, and is well commented on by users, it prints differently than previous versions, eg in handouts the slide image is much smaller than previously, in grid, the slides are off the printable area on the left.
We are hoping this is fixed in the round of scheduled updates.

HP Laserjet P1102w - Right side margin cut off when printing in Internet Explorer 9! URGENT PROBLEM*

Hi,
I have just purchased a new printer (HP Laserjet P1102W), and when I print a web page in Internet Explorer 9, the footer (I set to the URL) does not print at all and the header will print though the right hand edge of my entire web page is cut off (including my top right header - Pages ? of ?).
I always use Print Preview first, and in the print preview it looks perfect. I always tick the box to enable shrink to fit too. Why will it look perfect in 'Print Preview' but yet when it prints, it cuts off the right hand side edge of the page and doesnt print the footer?? I have tried adjusting margins, etc... all to no avail.
I would like to check whether others have this same problem?
I spoke to HP (UK Printer Support) and they said it is Internet Explorer 9's problem. I have left a message on the Microsodt Web forum which you can see here. http://answers.microsoft.com/en-us/ie/forum/ie9-windows_vista/internet-exploer-9-not-printing-header...
I am hoping they may release a patch / hotfix - but this has to be affecting many other users of this printer too? The more of us that complain, the quicker it will get sorted.
Any others with the same problem?
Thanks.

I spoke with Microsoft technical support via phone today. Between us - we seemed to have found the problem.
It's to do with the DPI (the font size) settings in Windows!?
I have mine set to 188% on my Windows Vista mahcine and 200% on my Windows 7 laptop.
From my Printing tests in Internet Explorer 9...
at 100 % DPI – it prints perfectly
at 150% DPI – it prints perfectly
at 200% DPI – the right side of the margin is cut off, and no footer is printed – despite it looking perfect in the Print Preview.
I am using http://uk.msn.com/ as my test print outs.
This indicates when the DPI is changed above 150%, IE9 doesn't print properly – though other browsers like Safari or Firefox do print correctly. This surely has to indicate a bug in either the Windows operating system or Internet Explorer 9?
Microsoft are going to run their own tests and phone me back tomorrow...hopefully with a solution!
Hope this helps any others with the same problem at the moment!
Would be great if HP could provide a soloution asap - surely a tweak to the Printer dirvers will fix the problem?

Left side of reports are being cut off when printed.

The leftmost character is being cut off some reports when printed. I have added the following to the registry on the report server but it still is cutting off the the left side of some reports.
REPORTS_ADD_HWMARGIN = YES
I am also getting a blank page after each printed page.
Edited by: user1065650 on Jun 22, 2010 11:35 AM

Any change the OS changed?
For example we were running 6 and everything was Windows.
On 10 the Report Server in on Linux and we had to play with the Fonts some to make it work.
We change the uifont.ali file
Its a long shot but in that file under these sections here what I have it it helps (Please make a copy first)
In the file /u01/app/oracle/product/midtier/guicommon/tk/admin/uifont.ali there are several issues.
First under “Mapping from MS Windows”
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
Arial = "arial.ttf"
#Arial = helvetica
"Courier New" = courier
"Times New Roman" = times
Modern = helvetica
"MS Sans Serif" = helvetica
"MS Serif" = times
"Small Fonts" = Helvetica
The lines in bold have been added.
Next under “Support for Far Eastern Languages”
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
#itcadvantgardegothic = arial
#"ITC Avant Garde Gothic" = arial
#itcadvantgardegothic = Arial
#"ITC Avant Garde Gothic" = Arial
itcadvantgardegothic = Helvetica
"ITC Avant Garde Gothic" = Helvetica
# Required
#itcadvantgardegothic = Arial
#"ITC Avant Garde Gothic" = Arial
The lines in bold have been added
Finally under “PDF:Subset” everything is commented out.

Strokes on appearance is getting cut off when exporting for web & Devices

I'm a screen print artist using Adobe Illustrator CS5 in windows 7(blah!) to export images of our customers' artwork into a huge folder of images on a server. The images are then loaded into a program so that they can be viewed company-wide and by the customer.
Occasionally, when there is an appearance applied to text it seems to cut off the tops and/or bottoms of the outermost stroke.This seems to be only happening to text, and happens randomly and is very annoying. See the image attached.
it does this with both JPEG and PNG images, and whats more, changes when you adjust the image size. it either gets better or worse. I have to change the image size on every export so that they are all within our size requirements.
I have found that if you put the art into an envelope with all the settings at 0 and then export for web it prevents this from happening. However, that isn't very efficient as i need to be moving a ton of artwork a day, and I am not the only person who may be working on the Illustrator file.
Is there any setting either in illustrator or windows that may be causing this anomaly?

Try adding:
Effect >> Path >> Outline Object
So your type will still be editable
If that does not work you may want to:
Type: Create Outline
I only had this problem once before, on some snickerdoodle cookies package, and that was a script font. Might be related to the font you use.

Brochure template right-side edge gets cut off when printed

Similar Messages

Maybe you are looking for