Broeken 3rd gen. next button

My 3rd generation ipod (40GB)'s right next button only works part of the time now and I would like to get this fixed. My ipod is certainly out of warranty and it seems like a lot ($249) to get this serviced. Any one else with this issue or any tips on fixing it?

very likely a hardware issue,
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
but bear in mind, it is also the time for you to have the battery replacement for your iPod, the battery should run fine for the first 18 months

Similar Messages

Ipad 3rd gen home button not working

any suggestions? The iPad is out of warranty. It has been not working for sometime. I've kept in clean, great codition. It is definitely a bug. I am annoyed that apple did not have a recall as I see many people having this same issue. I have an original 1st gen iPad that we use for a TV remote and there is never been an issue with the home button not responding.
PLease help!

Enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
Settings>General>Accessibility>AssistiveTouch: turn ON
*Note* If your Sleep/Wake (power) button is not functioning and you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device with the Sleep/Wake (power) button (since it's not functioning). To power on the device in this case, you will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

Apple iPad 3rd Gen home button unresponsive

Home button becoming unresponsive sometimes. Over a year old so no longer in warranty.
Will Apple replace or what can I do?
Only unresponsive sometimes but I fear it will get worse...
Emily

Enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
Settings>General>Accessibility>AssistiveTouch: turn ON
*Note* If your Sleep/Wake (power) button is not functioning and you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device with the Sleep/Wake (power) button (since it's not functioning). To power on the device in this case, you will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

Ipod touch 3rd gen home button and power button broken?

My iPod was working fine until a few weeks ago, when this started happening: every time you push the home button, it goes to the "slide to power off" screen, and then no matter if you slide to power off or if you click cancel, it shuts off after a few seconds and then tries to turn back on again. The same thing happens if you push the power/lock button for any amount of time. So, I can only run like 1 app unless I want to have to restart my whole iPod. In addition, sometimes when it tries to turn back on it tells me to plug it into iTunes, which I do and it tells me to restore it. I restored it, and then I unplugged it and it did the same exact thing, where any button press makes it turn off. I plugged it in again and it asked me to restore it again. Nothing seems to be working and I don't know if this is something that can be fixed or if I need a replacement?

You can turn it on via the Power button or by connecting the iPod to a charging source.

New iPad (3 gen) Home button requires pressure

The Home button on my new Ipad (3 gen) requires more pressure to activate than my old iPad (1 gen). Is anyone else experiencing this with the new iPad?

I have not. My new IPad (3rd Gen) home button requires very little pressure. Sounds defective. If you are in the return window, return it. If not, sounds like you need to setup service as you are covered under warranty.

Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work

Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

3rd gen iPod touch lock button issues

Recently my 3rd gen iPod touch started giving me problems with the lock button. If I press the lock button the screen will turn on and off rapidly and then the power off screen will come up. It will just keep doing this over and over; I've tried to restore it but no luck there. Any help would be greatly appreciated.

Sounds like the switch needs to be replaced. You might try this until you get it serviced.
https://discussions.apple.com/docs/DOC-3401
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

3rd gen 40g dock connector touchwheel with 4 buttons above wheel

i have old 3rd gen 40g dock connector touchwheel with 4 buttons above wheel. does not have firewire port on top , just hold switch and funky headphone jack for wired remote control . battery has long since died but still runs fine off wall current charger which has fire wire connector on wall socket end. i try to plug ipod into my laptop with usb cable to charge and update the ipod and i get the battery sign with exclamation mark in triangle on ipod screen and computer doesnt charge or recognize the ipod connected. my laptop does not have firewire port. is there a way that i can connect this old ipod to new laptop to charge and or update ipod with my new library? i dont care if battery is dead , i just leave on wall current in my office to play but would love to be able to update the library on the old boy. i have new shuffle/nano and itouch for traveling.

an update - it seems to be the 2 skip buttons, play and menu, and also the centre ok button not working at all. the wheel responds slowly. something just occured to me and i tried to use the remote which came with my ipod. this works fine with no problems but is annoying as i can't select certain songs, i have to start at the beginning and skip to where i want to get.
please help

IPod touch 3rd gen spinning wheel plus home button doesn't work. How to fix?

I have an iPod touch 3rd gen that is stuck on the Apple logo and also has that spinning of wheel death thing. I am trying to enter into DFU mode but won't work due to the home button not working. Is there any other way I can fix this and make it boot back up regularly?

Try here:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
See if using thies program will get the iPod in recovery mode so you can restore the iPod
RecBoot: Easy Way to Put iPhone into Recovery Mode
If not let the battery fully drain. After charging for at least for an hour try again.
If you can update to iOS 5 and the Home button sill does not work yu can turn on the Assistive Touch Accessibility feature. See chapter 30 of the Users Guide.
iPod touch User Guide (For iOS 5.0 Software)

Cannot upgrade my iPod Touch 3rd gen from 4.2.1 to 4.3.2. I click the button "check for updates" on iTunes and it says "This version of the iPod software (4.2.1) is the current version."

Cannot upgrade my iPod Touch 3rd gen from 4.2.1 to 4.3.2. I click the button "check for updates" on iTunes and it says "This version of the iPod software (4.2.1) is the current version."

1.Go to http://www.felixbruns.de/iPod/firmware/
2.Download the iPod Touch 3G 4.3.2 Firmware to your desktop.
3.Go to your iPod summary, then hold shift.
4.Keep holding shift and click Restore.
5.Go to desktop on the window that comes up and click the software.

Ipod nano 3rd gen unit is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help

ipod nano 3rd gen unit windows xp. Nano is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help please.

Sounds like the hold switch is broken, meaning you'll need to have your iPod serviced/replaced either by Apple or a third party repair company.
B-rock

Hold button on iPod (touch wheel) 3rd gen problem

well my hold button on my 3rd gen ipod touch button has just stopped working so when you slide it nothing happens, which is a problem as it is all touch button so it keeps changing tracks and stuff without me pressing anything.
so i was wondering if anybody else has had a problem like this and if so how they had it fixed because calling up the apple support the fix was about £170! might aswell get a new one, so any help from anybody will be appreciated.
Tom

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

My iPod Touch 3rd Gen's power button is broken.

I heard that if you take your iDevice to an Apple store they will replace it. Will they replace my iPod Touch 3rd Gen. since it is two generations old?

Restore your iPod touch in iTunes.

3rd Gen iPod off ebay - broken hold button

I just got a used 3rd Gen iPod off ebay (I know, you get what you pay for) as a gift for my girlfriend. The hold toggle switch doesn't work. Luckily it's not stuck on hold, but it ***** not being able it put it on 'hold'.
Does anyone know if this can be fixed easily?

I semt the ipod to ipodresq and had the backplane and battery replaced.

Broeken 3rd gen. next button

Similar Messages

Maybe you are looking for