Broken 3GS sim tray - need some info PLS
I had to pull a little harder than normal on the white (exterior visible part) of the sim tray and it broke.
Can you tell me how can I get a new one that has the IMEI code and serial number on it??
I'm asking here first because I'm not sure if you can get in touch with apple via email and also I might get an answer faster.
Thank you.
If you contact Apple or make appointment at Apple Store they can get a new SIM Tray with the compatible #'s exactly for your iPhone. Once ordered it may take a few days for them to get it in for you. Also they may charge you a small fee. Hopefully you can show them the old tray and they will just do it for free.
Similar Messages
-
3GS sim tray not openning, what to do
3GS sim tray is not opening, what to do.
Yeah, I have to agree with RoamingGnome...this sounds like more of a Jailbreak issue, not an Apple issue. If you bought this phone from a legal distributor and just haven't upgraded your iOS since 3.1.2, I'd contact the place where you purchased it. If you Jailbroke or bought it Jailbroken to get it Unlocked to use with any carrier, my best solution would be to search the net. I'm pretty sure there is a current Jailbreak for up to iOS 5.1.1, but I'm not really up to date with that information. I do know that you can legally now purchase a factory unlock from Apple, but I'm not sure if that's only with new purchases or if you can buy an Unlock for an older phone.
My best solution would be to search your phone revision & iOS online and you should get what you're looking for. Sometimes you can even just search YouTube and they'll have a step-by-step video showing you exactly how to do whatever you might need to get up & running again.
It's pretty rough being without a cellphone, especially if it's your only communication device. Hopefully this at least pointed you in the proper direction. -
Need some info on SAP Business One
Hi, Need some info on these questions.
1. Out of this which is the full SAP Enterprise -level business system.
SAP Business One
mySAP All-in-One
mySAP Business Suite
SAP NetWeaver
R/3
2.SAP Business One allows users to export data directly to from screens to which of these:
Into Excel
Into Word
As JavaScript
As XML files
Thanks for the help guys.
NeehalHere is a link about SAP B1 :
http://www.sap.com/solutions/sme/businessone/index.epx
For SAP A1:
http://www.sap.com/solutions/sme/businessallinone/index.epx
Hope this will help
Bishal -
My 3gs sim-tray is jammed
Any help is greatly appreciated.
My 3gs is still under warranty m planning to go to apple store.
Any one had the same problem ??
What you did ??Tried it mate
But doesn't matter how hard i press it doesn't come out more then 1mm and when i tried to out using a plucker it feels like something stuck inside. -
IPod Touch Headphone Jack - Need some info on my GB appointment tomorrow!
Greetings
My iPod Touch headphone jack is broken for some reason, and I just made an appointment to go to the local Genius Bar with my father, as I don't yet have my license. I need to know some info, like:
Is there a cost to fix the headphone jack?
Any good tips to get a better experience or any helpful info for my appointment tomorrow?
Thank youAny good tips to get a better experience or any helpful info for my appointment tomorrow?
Be polite! -
I Need some info about interfacing the PC or laptop to Spectrum analyzer using Labview
we need to control the spectrum analyzer using an interface that will be developed using Labview .
Spectrum analyzer will be connected to tha PC using RS 232C and the waveform observed will be seen in the PC interface of spectrum analyzer.
Pls send some info regarding dis.Using a spectrum analyzer with LabVIEW is a pretty common application, my first program 15 years ago did this. What we need to know to help you though is what model spectrum analyzer are you planning on using? Most of the ones I'm familiar with use the GPIB interface rather than RS232, but that isn't a major issue, the spectrum analyzers command set is the important one. There are a lot of LabVIEW drivers available for a larger number of analyzers, here on the National Instruments' site. Although most use the GPIB interface (or ethernet), they can be used as a starting point to develop an RS232 driver if one isn't available, assuming that there is a driver for the model that you have, or a closely related one (manufacturers frequently use similar command sets within a model type).
So, what type analyzer are you using, and what types of things are you planning on doing with it?
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion -
New Builder needs some info K9A Plat. RAID Array help
This is a new build AMD 64x2 6000+, K9A platinum, Lite On DVD Re Writeable SATA, 2x74Gig WD Raptors in Raid 0, Asus X1950 pro Thermaltake 700 W PSU Crossfire cert.
BIOS registered my drives, Built array PC Rebooted, Installing Win XP pro Hit F6 install drivers, Format drives, Then before Install It says that :setup cannot copy the file ahcix86.inf.
If I skip it, it will install XP but when I try to boot from the hard drive It starts to load XP but crashes to the blue screen of death
*** Stop: 0x0000007BC ( 0xF78A2524, 0xC0000034, 0x00000000, 0x00000000)
Has anyone got this error string?
First RAID array I would very much appreciate any help given.Hi!
Looking at some info on Google and Microsoft site, I cannot find the BC error code, only the error code ending with B. It indicates an error with the boot device. It can be caused by several things.
Check that you are using the correct device drivers to install Windows
Also, check the installation CD. It could be that the disk was damaged and that you are missing a crucial file because of that
You can also try installing Windows again and choose to recover the previous installation.
If this all does not help, try installing Windows on a single HDD (no raid) to see if that will work. -
Satellite Pro A10 - need some info about RAM upgrade
Dear Fourm members
In regard to the above machine : please can anyone advise :- how many memory slots does it have.
I think it is two but am not sure.
Also what max size memory module can we have in this laptop please.
If it is 2 @ 1gb per module, then we would have a total of 2gb.
Is the hard drive on this machine a standard laptop hard drive. Can I take the small 20gb one out and replace it with a larger one. eg 120 gb etc
Thank you so much for your help.
IanOn satellite Pro A10 two memory slots are available. Notebook can handle with 1 GB RAM and you can use two compatible PC2100 512MB (PA3164U-1M51) modules.
This old machine uses 2,5 HDD with old IDE connector. I found some info that it was delivered with 20GB, 30GB and 40GB HDDs. I think you can upgrade it with HDD up to 100 GB but just be sure it has the same HDD connector.
If you have more questions you are welcome.
For more info post exact model number please. -
Need some info on BI CONT 7.x
Hi,
I need some clarification on BI Content ADD ON 7.x.
Though new versions are getting released day by day with good new add on modules, but do we have BI Content which has complete DTP's and Transformations for Logistics and FI module.
I hope it might be confusing, i will come some other way around.
with bi content 3.5 whenever we activate a cube/ODS using business content in RSA1 by taking in dataflow before it will activate cube/ods, update rules/infosource etc.., in the same way if i activate LO or FI modules cubes or DSO using BI content 7.x can i get Transformation,DTP's get activated.
for your information till now i have not used Bi content 7.x.
I could gain some knowledge from your end.
thanks
Prashanth.The business content is still not in 7.0 dataflow. So you need to install the 3.x objects and migrate them to 7.0 And as far as the 7.x infosources, if you want u may install them and use for the transformations (while converting the transfer rules). Anyway the system wil prompt you to use a existing 7.0 infsource or conver the existing 3.x infosource. And infosource is not mandatory as of 7.0 dataflow.
Thanks. -
i want to create a program that will resemble to odc/strong dc/etc and need some sugestion. first i will need to create a server that the GUI will send/recieve messages to/from. maybe you can point out some java tehnologies that can be helpfull in this case. if not, maybe some tutorials,articles,anything that might help me. i also need some links about network programming that might help me in doing the project. many thanks
What are you talking about and why did you post this here?
-
New Member wanting to buy but needs some info..
Hello all, I am new to this forum.
I have found this forum in the search of information regarding these Wind Top pc's.
Information is fairly thin on the net so I thought it best to join this forum and ask my questions here where I am sure I will get acurate answers.
I have searched the threads here in but still need some clarification.
My scenario is as follows:
I want to use one of these AIO's mainly as a music and music video jukebox.
Tv tuner, either built in or usb external would be good also.
Sound output is to a set of active Audioengine A5 2.0 speakers.
Ive been checking out a few other brands like:
Asus, Shuttle, HP, Lenovo and Gateway, though I like the look of the MSI ones the best.
16 inch is realistically too small, 20 inch is just about right and 22 inch upwards may be a little big and probably a little to much like a fully fledged pc, which may be a little much for what I need?
It will be placed in my Kitchen/Dining/Sitting room. Size is 8m x 6m.
I dont really want to spend a fortune, maybe below a $1000 if possibe but definately not to much above $1000. I am in Australia, Tasmania actually and viewing/demoing is fairly non existant.
The MSI 2020 or 2220 etc is probably at the top of my list.
It looks similar to a large picture/photo frame as apposed to a fully fledged computer.
I have attached my Audioengine A5's to my dell 15" laptop, T6400 or 2.0 gig core 2 cpu, 3 gig ram and Radeon HD4570 gfx.
Installed 80 gig of music and when starting/browsing windows media center for music, it does OK but I can see its not as quick as I would like it to be.
Therefore what worries me is trying to work out how one of these lower specked MSI wind top touchscreens will perform.
Can anyone please share their thoughts or experience especially regarding the browsing and playing of a music mp3 collection of reasonable size eg 80 gig etc.
Thanks in advanceIt's probably a good idea to check out reviews as that will give a good idea of whether it meets your needs. I don't own a Wind Top so can't comment on what it's like to use.
MSI Wind Top AE2220 review: http://www.theinquirer.net/inquirer/review/1594404/msi-wind-top-ae2220
You'll obviously want better performance than your laptop, which would rule out the Wind Top AE2020, since that has an Pentium T4500 Dual-Core processor, which is slower than the Core 2 Duo T6400. The Wind Top AE2220 would be the better choice of the two since it can come with the Core 2 Duo T6600 processor. -
Need some info about current market on SAP HANA
Hello all,
Iam ajay. I have 2 years experience on java and i learned SAP ABAP and want to learn SAP HANA. I I have some doubts regarding current market on SAP HANA and how people are using HANA now. I have searched a lot in google and contacted many people but i didn't get the good answer. I hope this post provide me the required info. Thanks in advance.
Can somebody please give some info. about the following.
What exactly does the following mean and what is the future of these areas?
BWI with HANA
BODS with HANA
HANA modelling and implementation.
HANA Migrations.
SAP UI5 with HANA.
please spare some of your valuable time and help me on this.
Thanks,
Ajay.Hi
I agree its a common HD webcam with a resolution of 1Mpix.
You can record the video in Mpeg format and the pictures would be taken in format: 160x120, 176x144, 320x240, 352x288, 640x480, 1280x720, 1280x800 -
I need some info about the Document Class.
Hi,
I need some information about the Document Class, can anybody
tell me where I can find it.
thanksEmad Zedan,
> I need some information about the Document Class, can
> anybody tell me where I can find it.
The concept of the document class was introduced in Flash
CS3. What it
does is allow you to optionally associate a custom AS3 class
with your FLA
in the Flash authoring tool. Your document class effectively
*becomes* the
main timeline. This is your chance to influence the
underlying behavior of
the MovieClip or Sprite instance that serves as the
foundation for your SWF.
If you don't associate a custom document class with your
FLA, the FLA is
associated automatically with a default document class called
MainTimeline,
which extends MovieClip.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design." -
Need some info on general question
Hello everybody!
This question for those who already works as a Java professional. I just don't have a clear picture of how can you apply java programming language in real working environment, in theory I can imagine, but I need a solid understanding so that I would spend all the time moving in right direction. Do they use Java for writing some applications for some, let's say, financial institutions. I can write simple application which will connect to some RDBMS (SQLServer,Oracle, whatever you have) and perform extracting, changing, deleting information, but I can do all this stuff only on my user computer, I am just college student. How do you implement this in real environment, do you have first to install Java Runtime Environment on all user computers and install those java applications which will be working with database? What about middle-tier concept, what this all about? I happend to have interview in one company but I failed to answer on middle-tier topic. As I understand it's better to change some procedure in one place than changing apps on all user computers, how you deal whith this, this is so far not clear for me. I have never seen how users launch their apps in financial institutions (exe. files - popular question on this forum), how does this system works, or may be they use for this purpose different language like C++. What about internet, they say java was created whith internet in mind... Oh my god, I have so many questions on how you can use Java in real world, not just for fun. Hope somebody can explain it to me in plain English.
Thanks in advance.Here is a real world example (its a project I've been working on for about a year).
Its a 3-tier client server system. This means there are 3 parts of the system:
1. SQL Server database on a remote server
2. Middleware java application running on the server
3. psion netBook clients (handheld devices) running a Java application
The actual system itself is used for remotely capturing dental information on the netBooks. At the end of the day the user can dial-up to the server where the database resides and update the database with info captured on the netBook. The user can also download a group of patients from the server to the netBook client.
The purpose of having a middle tier (or middleware), is so that any server-side changes will not impact on the client side, and vice versa (at least thats always been my understanding).
To create this architecture I used the JDBC API (for database processing, middle tier), and the RMI API (for networking, middle tier and client tier). Alternatively I could have used CORBA instead of RMI.
I beleive (although I'm no expert on this), that servlets can be used to create a similar kind of thing through a web interface (i.e. a database on the web server can be updated through a web page). Hopefully someone can confirm this for you.
And of course there are applets, that are simply java appications running on a web browser.
I would imagine that the majority of industry work done in Java is with client server apps either with servlets (web) or a backend on a server somewhere.
If anyone would like to correct me please do...think I've got most of this right. -
Need some info about Equium A60
Hi,
I am looking to upgrade RAM on my laptop which is a Equium A60 (PSA67E-001004NO). I need to know what speed my motherboard supports... I posted a question some time back and got the impression that my laptop can take 533mhz but I enquired other places and got the idea that my laptop supports 333mhz. I need to know the correct value my motherboard supports. Whether its 333mhz or up over..
One thing more I need to know is there any way one can check for the configuration that laptop has, because there is nothing about this Equium on the net or Toshiba site...
I remember to see a page on which all hardware and preinstalled software details of Equium A60 PSA67E-001004NO were on the net but I fail to remember where I saw it..
Can someone help in any way?Hi
Your notebook has 256MB internal memory and just one slot is available for memory expansion. I have found info that your unit can handle with 1280MB max.
The compatible memory modules are:
PC2700 256MB (PA3311U-1M25)
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
If you want check part numbers on Google and you will find out all info about those modules. I have no time now to check it for you.
Bye
Maybe you are looking for
-
can someone help me with a printer that wont stop innitialising?
-
Automatic removal of billing block in sales order
Hi Friends, I want to remove billing block in the sales order automatically (by system) when I click the PGI for the relavant delivery document. I hope this is not possible through standard. If not please guide me how to solve this issue. Thanks Kuma
-
-208 ERROR preventing me from listening to purchases!
ITunes 6 now asks me to authorise each song (purchases made over the last 12 months) and then I re-enter username and password and then I am told I have a new authorisation. (1/5) Then I get a -208 error, unknown error occurred. Please try again late
-
How to use .ttf font in muse ?
Hi, I have a question, I want to make a website using thai font (which is Angsana New ). I have the font which in .ttf I have the font installed in my system and overtime I upload the website the font will exported as an image. Can someone help me b
-
OS 1.3.1 released
See here for update notes: http://forums.palm.com/palm/board/message?board.id=webossoftware&thread.id=2813 Post relates to: Pre p100eww (Sprint)