Broken a1181 screen help move data

my mac a1181 has a totaly broken screen that cannot be used at all and i want to get my info from the hard drive off please help

You don't have an iBook. You have a MacBook. Boot with the T key, and connect a Firewire cable to it. If the model you have is originally Firewire 400, and you have either an 800 or Thunderbolt machine, you can get adapters from http://www.macsales.com/ to connect the two.

Similar Messages

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. help

I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!

Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.

I have broken my screen and cannot access my iphone. I have an icloud account which I have used to back up my phone previously but nothing is showing on the website. How can I backup my data?

I have broken my screen and cannot access my iphone. I have an icloud account which I have used to back up my phone previously but nothing is showing on the website in contacts etc. As I can enter my pin I cannot connect it to a laptop. Is there anyway of backinh up my data, pictures etc?

No there isn't. If you check iCloud, you are not showing any backups at all? Did you have the phone set to sync contacts in iCloud, or were you just backing up to iCloud? If you were just backing up, then you should be able to access the backup, but if you were not syncing, then you probably cannot see the contacts in iCloud. You would have to wait until you restore from the backup to see them. You will probably have to go onto the iCloud website to erase and remove the device from Find My iPhone if you want to clear it off.

Ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Black Preview Screen on Movie Maker on my HP Pavilon dv7-6175us, can someone help me , thanks

Back Preview Screen on Movie Maker on my HP Pavilon dv7-6175us, was working before , now it is not working, can someone help me , thanks

@Greg57 ,
Hello and thank you for posting on the HP support forums. So that I can provide you with the best possible assistance here I am going to need a little more information.
So you say Movie Maker give you a black screen on play back.
First here is a link I would like you to go to and check out. Please post back with as much information as you can. Do not post your serial number.
Advice for asking the "Very Best Question"
Other things you can post back with is.
1) What type of file are you trying to play back. ( .avi, .mpg, wmv, .ogv.)
2) Have you used other media players that have built in codecs to play different video types.
( VLC media play it is free to download. Quicktime from apple. Windows Media player. Realplayer.)
3) Have you saved this file and tried to play it on other systems. If it plays black on other computers then you have a corrupt video file.
Please try a few things and let me know what you tried to do to solve this issue.
Resolve common Video Playback problems and issues on Windows 7
Do other videos have problems on your system. If yes you could have an issue with the notebook. If no you are looking at a software issue or an actual issue with the file itself.
Hope to hear back from you soon.
When you post back could you provide key system information as well. What is your product number and what Version of Operating System are you running. For example Is it Windows 7 home or pro or ultimate. What updates or service packs have been installed.
Here are some links for you that should help.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Thank you so much for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

I used migration assistant and my ethernet cable to move data and apps from my 5-yr old Intel-based iMac to my brand new Intel-based iMac running OS Lion. The old machine was running OS 10.5.8. Not all my files transferred (or I can't find them). Help

I used migration assistant and my ethernet cable to move data and apps from my 5-yr old Intel-based iMac to my brand new Intel-based iMac running OS Lion. The old machine was running OS 10.5.8. Not all my files transferred (or I can't find them). I've seen recommendations to select the old computer in System Preferences, but that didn't work. Help. Thanks!

IMO, wrong choice. Start over, using a FireWire cable and following the steps in Pondini's Setup New Mac guide.

Ipad screen broken. how do I access data to back up before repairing?

I dropped ipad. screen no longer functions. How do I access data from ipad to back up to our computer before having ipad repaired?

Some iPad users have been able to revive their dropped iPad. Turn the iPad over and give it a HARD SLAP on the back. May take several slaps.
dropped iPad
https://discussions.apple.com/thread/4474708?tstart=30
If you take it to Apple, you'll get a replacement iPad, so all your files will be gone. Check with some of the 3rd party repair places below. They should be able to repair your iPad with the files intact.
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iCracked - Broken iPhone, iPod or iPad
http://www.icracked.com/
iReVamp Electronics Screen Repair ($99)
http://www.irevampelectronics.com/ipad-2-broken-glass-screen-repair.html
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Do It Yourself iPad Repair
http://www.ifixit.com/Device/iPad
 Cheers, Tom

I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

A reset has nothing to do with Internet access or data access.
A reset is simply pressing and holding the home and power buttons until the white Apple logo appears.
What are you really trying to do?

How to move data from a staging table to three entity tables #2

Environment: SQL Server 2008 R2
I have a few questions:
How would I prevent duplicate records, when/ IF SSIS is executed many times?
How would I know that all huge volume of data being loaded in the entity tables?
In reference to "how to move data from a staging table to three entity tables ", since I am loading large volume of data, while using lookup transformation:
which of the merge components is best suited.
How to configure merge component correctly. (screen shot is preferred)
Please refer to the following link
http://social.msdn.microsoft.com/Forums/en-US/5f2128c8-3ddd-4455-9076-05fa1902a62a/how-to-move-data-from-a-staging-table-to-three-entity-tables?forum=sqlintegrationservices

You can use RowCount transformation in the path where you want to capture record details. Then inside rowcount transformation pass a integer variable to get count value inside
the event handler can be configured as below
Inside Execute SQL task add INSERT statement to add rowcount to your audit table
Can you also show me how to Check against destination table using key columns inside a lookup task and insert only non
matched records (No Match output)
This is explained clearly in below link which Arthur posted
http://www.sqlis.com/sqlis/post/Get-all-from-Table-A-that-isnt-in-Table-B.aspx
For large data I would prefer doing this in T-SQL. So what you could do is dump data to staging table and then apply
T-SQL MERGE between tables (or even a combination of INSERT/UPDATE statements)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

"Searching for movie data" message locking up keynote

Using Keynote '09 on a Macbook Pro. Importing keynote files from a shared server. Files contain embedded video.
Never had issues with previous versions of Keynote on same machine. Now, after opening the files, they lock up and a message pop-up says "Searching for movie data in file "filename.mov""
Does anyone know why this happens? Is there a preferences option that can diasable it? It happens every time I open the file, even after I have let the file previously run its course, which can take over an hour.
Killing my productivity. HELP!!

I am also seeing this bug and often work on 400mb+ presentations that use larger screen sizes and have lots of video assets for work. On large files I find that autosave is not ideal, and would also like a way to turn it off. The computer that was seeing the issue was running 10.7.5. It was just updated to 10.8.2 so I am keeping my fingers crossed that it works better now. Time will tell.
I also really hope that Apple gives us a real refresh on Keynote on the Mac. As old as it is, it still ahead of Powerpoint. But it wont stay that way forever standing still and nobody else has a better alternative that is as fast and flexible to work with. They are squandering somthing special by letting it gather dust.

IMovie error 'searching for movie data in file "IMG_4365.MOV"'?

my iMovie goes into a loop at startup with the message "searching for movie data in file IMG_4365.MOV"?
I'm on iMovie 09 (version 8.0.6) and it's driving me mad. Help!

I am also seeing this bug and often work on 400mb+ presentations that use larger screen sizes and have lots of video assets for work. On large files I find that autosave is not ideal, and would also like a way to turn it off. The computer that was seeing the issue was running 10.7.5. It was just updated to 10.8.2 so I am keeping my fingers crossed that it works better now. Time will tell.
I also really hope that Apple gives us a real refresh on Keynote on the Mac. As old as it is, it still ahead of Powerpoint. But it wont stay that way forever standing still and nobody else has a better alternative that is as fast and flexible to work with. They are squandering somthing special by letting it gather dust.

Searching for movie data in file "******.mov"

The last couple of weeks I've been getting dailog boxes that freeze up Keynote with the following message:
Searching for movie data in file "******.mov"
It runs through all the different MOV or MP4 video files I have in that particular Keynote and doesn't allow me to do anything but wait. I've tried moving the file to another HD but this didnt't change anything. Also changing the save settings didn't help.
It happens a couple of times an hour and is getting annoying. Anyone have any clue how to solve this?

I am also seeing this bug and often work on 400mb+ presentations that use larger screen sizes and have lots of video assets for work. On large files I find that autosave is not ideal, and would also like a way to turn it off. The computer that was seeing the issue was running 10.7.5. It was just updated to 10.8.2 so I am keeping my fingers crossed that it works better now. Time will tell.
I also really hope that Apple gives us a real refresh on Keynote on the Mac. As old as it is, it still ahead of Powerpoint. But it wont stay that way forever standing still and nobody else has a better alternative that is as fast and flexible to work with. They are squandering somthing special by letting it gather dust.

Help for date field not working after upgrade

hi experts,
In our BSP application for a page we had an inputfield (date).
Onvaluehelp for input field we were calling the saphelpdate function.
however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
we have upgraded to SPS 16 recently.
please help me.
regards,
Arvind.

Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
DATA: BEGIN OF T_PCONT OCCURS 0,
      PCONT LIKE ZPSPERMISOS-PSOBKEY,
END OF T_PCONT.
DATA: BEGIN OF T_FIELDS OCCURS 0.
        INCLUDE STRUCTURE help_value.
DATA END OF T_FIELDS.
DATA: BEGIN OF T_VALUES OCCURS 0,
      VALUE(60) TYPE c.
DATA: END OF T_VALUES.
DATA: N TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK b20 WITH FRAME TITLE text-b02.
SELECT-OPTIONS:
    P_CONT FOR ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_INT FOR ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_FEC FOR ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,
    P_RAZ FOR ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b20.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
PERFORM P_HELP_P_CONT USING P_CONT-LOW.
*&      Form P_HELP_P_CONT
FORM P_HELP_P_CONT USING P_P_CONT.
DESCRIBE TABLE T_PCONT LINES N.
IF N EQ 0.
    T_FIELDS-FIELDNAME = 'PSOBKEY'.
    T_FIELDS-TABNAME    = 'ZPSPERMISOS'.
    T_FIELDS-SELECTFLAG = 'X'.
    APPEND T_FIELDS.
    CLEAR T_FIELDS.
    SELECT PSOBKEY FROM ZPSPERMISOS
    INTO TABLE T_PCONT.
    SORT T_PCONT BY PCONT.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
    EXPORTING
      CUCOL        = 10
      CUROW        = 1
      TABNAME      = 'T_PCONT'
      FIELDNAME    = 'PCONT'
    IMPORTING
      SELECT_VALUE = P_P_CONT
    TABLES
      FIELDS       = T_FIELDS
      VALUETAB     = T_VALUES.
ENDFORM.                    " P_HELP_P_CONT
Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM

LAST GOODS MOVEMENT DATE wise report

Hi MM Experts
Is there any report through which we can find LAST GOODS MOVEMENT DATE ( goods receipt , issue date ).
i have tried MC.2 but in this report material , plant and sloc description is coming , i want code so that we can understand easily.
regards
anubhav

Hi,
To get the plant, material code with description in MC.2 transaction.
Please following below steps:
on output screen >>>
settings >> Characteriastics display >>> select key and description or only Key.
Regards,
Shailesh Mackwan

How do I move data on time machine from one external hard drive to another

How do I move data on time machine from one external hard drive to another?

Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. Turn Time Machine OFF in its preference pane while copying the volume.

Broken a1181 screen help move data

Similar Messages

Maybe you are looking for