Broken akku and hanging system.
Hallo,
since an few days is the Akku from my PowerBook absolute broken. This is basically not an big problem. My problem is now, when I activate the sleepmodus by closing the lid, and awake it with open the lid, the system is hanging about 10 seconds. But only by this procedure. As the Akku had still any few power, it ran normal.
But when I choose the sleepmodus from the apple menu, and closing the lid, and I awake it, it run like normal.
This had I yet every time, when I removed the Akku from the Bay.
Any ideas, what that can be?
No, The system just hang up! But there is a cross cursor in the middle of monitor and black screen with a colored line weight by 1px in the bottom...
Cursor doesn't moving...
In the /var/log/X.0.log there is no line with EE
the same problem appears if i use vim...
config file of Xorg doesn't changed for months...
Similar Messages
-
USB 3 drive falls asleep and hangs system
I have a USB 3 drive and I notice that when accessing files on my internal drive (that is, not the USB 3 drive) it sometimes needs to wake up. I hear it whirring up to speed and it takes about 5 seconds while the entire system hangs until it comes online and then everything goes back to normal. This happens while I am already actively using the system. Any idea why and how to stop this?
By the way, the drive was in a Lacie enclosure, but I moved it to a new USB3 enclosure myself. It is listed in Disk Utilities as a SAMSUNG HD204UI. It's 2TB and 7200rpm. I also have a WD drive in another USB3 enclosure as a Time Machine backup. It doesn't seem to be causing the issue.Didn't know that this was a feature of USB specifically. I actually took my drives out of FW enclosures and moved them to USB3 since that's so much faster. When you refer to the do not sleep setting, I guess you mean in the Energy Savings settings where you have the tick box to "Put hard disks to sleep when possible". I unticked that and it seems to be helping, so far!
-
Adobe Bridge CS4 Hangs and whole system goes down.
Adobe Bridge CS4 Hangs and whole system goes down.
This is happening when I just finished edition RAW files in ACR and hit DONE, right after that a Bridge hangs, Cannot open Explorer, PC functions are down, cannot start anything, cannot stop Bridge process, cannot properly restart. Only holding power button shuts donw PC forcefylly.
I happens once per 10 edits of RAW files and super annoying.
Pleeeeease help!No wonder I think this is Bridge.
That is indeed a tempting thought, have you already tried the refresh preferences for Bridge using ctrl key pressed down while restarting Bridge?
But Bridge is very critical in reacting on odd system behavior, so also keep the advice of Station-Two in mind. On a Mac repairing permissions often solves problems, don't know the PC equivalent of this. -
a couple weeks ago, firefox stopped loading (just hung system) on my acer computer running windows xp. I deleted firefox and downloaded versin 4.0.1. But, the same thing is happening. it starts to load but then stops responding and hangs the system. what is wrong?
I also have this problem and it just started in the last week or so. It seems to be dependent on my home network and the problem only exists with firefox. I have used chrome and IE8 with no issues. I can verify tomorrow that it only exists in my network but one thing I was able to test is that the problem exists even on my linux boot. I am totally dumbfounded with this problem and I can't find anything that will allow the gmail page to load. All other pages I have tried load fine, all be it a little slower than normal but they load. If anyone knows of a difference between firefox and all other browsers on how it goes through the router I would appreciate the info cause I don't know of any differences.
-
my ipad mini ID code is forgetten, and its system is also broken and how to change the ID and restore the system?
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
Mac pro 5,1 / 10.8.2 / 10.0.7 - while working in fcx and the program and the system hangs (freezing)
mac pro 5,1 / 10.8.2 / 10.0.7 - while working in fcx and the program and the system hangs (freezing). Only moves the mouse pointer. In addition to disconnecting from the mains, nothing helps! what to do?
Yes, it would if you ran it on the new MBP which is the reason I am saying install rather then clone.
If you clone then you are only getting the same code as the old MBP which probably will not have the correct drivers. -
My IPAD Mini touch screen is not responding, it is showing a message icloudBackup but the back up is not happening and the system seems to be hanged?
Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem. -
System is Freezing and Hanging - Lumia 920
I have Nokia Lumia 920, i buy it last june10,2013 its nice and cool....but now i experience in my Nokia Lumia 920 the system is freezing and hanging minutes by minutes that's why i cannot enjoy to used my mobile Nokia Lumia 920. Can you give me some solutions to fix my problem about my Nokia Lumia 920..thanks
Moderator's Note: A more appropriate subject was provided as the post was moved to the correct board.Check for updates
reset the phone
have it checked at Nokia Care -
Aperture-3 hangs and the system too, while editing in 100%
I am not sure about other people have the same issue,
Just wanted to explore if any of you have / had the same issue.
I use Macbook Pro 13" (i5 & 4GB RAM), Recently installed aperture-3 from mac store.
I usually shoot in RAW and do the rest with app-3.
In recent days, my aperture and my system hands while editing any RAW image, mostly while using brushes (for sharpening / polarization).
Coincidentally or not, it happened all the times when i have the pis in 100% zoom-in condition.
If you experienced similar issues please share and let know hoe you resolved it... Also requesting experts in this group to throw some light on this subject.
Thanks in advance
MunishHello munish,
I'd try some diagnostics first, before you reinstall.
Macbook Pro 13" (i5 & 4GB RAM)
I had the same setup as you - it worked great with Snowleopard, but as soon as I upgraded to Lion Aperture was running at a snail's pace and completely useless. I added 4 GB RAM and all was back to normal. Also, if your harddrive is very full, performance may go down. Keep at least 10% of your drive empty. How full is your disk right now?
To check if RAM might be an issue on your machine, start the Activity monitor (Applications -> Utilities) and look at the memory usage while Aperture is running. Don't run any other apps simultaniously, that are heavy on RAM, like Safari.
And run a hardware check: Using Apple Hardware Test: http://support.apple.com/kb/HT1509
If you cannot find a hardware problem - hopefully not! try the usual trouble shooting measures in turn, for corruption of some files in your Aperture Library may cause similar symptoms, see Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
If you want to reinstall Aperture as described in the post that Nilsemann pointed to - since you installed your Aperture from the AppStore - then you need to enter the following command in a Terminal window after cleaning the libraries before you reinstall Aperture:
Sudo pkgutil -forget com.apple.pkg.GarageBand
That will ensure that all recent update packages will be deactivated and you can update the newly installed installed Aperture.app again to the most recent version. You will be prompted for your admin password when you enter the command.
Regards
Léonie -
Predictive is always bug and hang for iOS 8.3 system
predictive is always bug and hang for my iOS 8.3 version
I'm not seeing any issues with it at all.
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset. -
Restarts and Hangs on Surface Pro 3
Has anyone been experiencing a high number of restarts and hangs on the Surface Pro 3? Over the course of three days I have had 11 BSODs. I scanned the minidmp and it points to ntosknrl.exe. And the event log has the usual unhelpful
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
I am reading a lot about the wireless card issues on the SP3, wondering if maybe it is caused by this and an update might do the trick in the upcoming weeks. The restarts happen around the same time when the device wakes, and is not online..
Anyone else experiencing this?
Thank youI guess I can see the logic behind that. I'm not sure exactly how Connected Standby would work when you are using a hypervisor. The one thing that is annoying is that the Surface Pro 3 (or maybe it's just a Windows 8.1 thing in general?) has a nasty bug
between hibernation and Wi-Fi. If you were connected to a wireless network and then go into hibernation, when you come out of it, it looks like it's still connected to the wireless network but you get no connectivity. I was able to work around this by creating
a scheduled task based on the alert that's generated from exiting hibernation (event that says exiting low powered state or something like that) that kicks off a Powershell script that uses netsh to find the connected network, disconnect from it and then reconnect
to it. It works pretty well but what a workaround to have to do just to conveniently exit hibernation and then automatically regain wireless connectivity! -
SLD Export / import Technical and Business systems
Dear all,
I am new to SLD administration.
We have task to update the local SLD on the Production PI system PPI ( Target ) with the business systems ZEC, ZSC from the Production Master SLD on Production solution manager system
PSM ( source ) using Export/Import on the necessary technical and business systems.
Please confirm whether i am following correct steps :
Go to SLD Administration on PPI target system
ALL Instances
Instances by Class
Model
( which one of this option need to be selected , please let me know ?? )
Go to SLD Administration on PSM source system.
select Export button ->
Select business systems one by one and perform Export which will create .ZIP file
at local machine.
Go to SLD Administration on PPI target system
select Import button ->
Select Export ZIP file which created in previous steps from PSM and provide location from desktop
Start Import button ( only if you get Continue import option )
Please let me know if above procedure is correct for business systems
if yes then what need to be done for Technical system ??...do they require Export/import also ?
If yes when i go to technical system option i get Export option disabled...but same way when i go to
business systems option i get Export button enable and able to perform the export.
Do i need to only Export / Import business systems ?
Plese help me.
Regards,
RRManoj,
It seems entries are added manually .... should we remove and run Import for the same ...
or just try to overwrite .... in case of overwrite option ( as we have open OSS message ) SAP has suggested through OSS message that If you end up with problems when trying to overwrite, then the PPI SLD is broken and will have to be re-built because someone made a manual change to it and got the GUIDs out of synch with the master.
I do not understand if target system PPI SLD gets broken during overwriting operation as mentioned by SAP ... whats is the way / steps / procedure to Re-build SLD .
In rebuilt - process do i need to Import ( Export -> Export lines -> ALL ) the export backup created before start of this activity ? please let me know SLD rebuilt steps and about Remove - reimport issue.
Appreciate you time on this. thanks in advance. -
Process chain executed synchronously produces dump and hangs
Process chain (RSPC) being executed synchronously hangs on a step (not first) with yellow status. Analysis of ST22 shows there is dump: RAISE_EXCEPTION
The chain loads data from flat files on frontend to several characteristics (attributes and texts). All the steps are sequential.
After the start first file is loaded successfully (info package), subsequent data transfer process has no errors too. But the second info package becomes yellow and hangs just after ( after some time timeout occurs and the step becomes red). In ST22 i see dump, text of the dump is below. Analysis of the dump reveals that 'GUI_UPLOAD' FM doesn't work during execution of the second info-package.
The chain looks as follows:
1. Info package 1
V
2. Data transfer process 1
V
3. Info package 2 <------- hangs here because of dump
V
4. Data transfer process 2
V
Hangs on step 3 (infopackage 2).
Text of the dump:
Runtime Errors RAISE_EXCEPTION
Date and Time 10.10.2010 19:07:59
|Short text |
| Exception condition "NOT_SUPPORTED_BY_GUI" raised. |
|What happened? |
| The current ABAP/4 program encountered an unexpected |
| situation. |
|Error analysis |
| A RAISE statement in the program "CL_GUI_FRONTEND_SERVICES======CP" raised the |
| exception |
| condition "NOT_SUPPORTED_BY_GUI". |
| Since the exception was not intercepted by a superior |
| program, processing was terminated. |
| |
| Short description of exception condition: |
| |
| |
| For detailed documentation of the exception condition, use |
| Transaction SE37 (Function Library). You can take the called |
| function module from the display of active calls. |
| - |
|How to correct the error |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "RAISE_EXCEPTION" " " |
| "CL_GUI_FRONTEND_SERVICES======CP" or "CL_GUI_FRONTEND_SERVICES======CM00X" |
| "FILE_EXIST" |
| |
| or |
| |
| "CL_GUI_FRONTEND_SERVICES======CP" "NOT_SUPPORTED_BY_GUI" |
| |
| or |
| |
| "RSBATCH1 " "NOT_SUPPORTED_BY_GUI" |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
|System environment |
| SAP-Release 701 |
| |
| |
| SAP kernel....... 701 |
| |
| Patch level. 69 |
| Patch text.. " " |
| |
|User and Transaction |
|
| Program............. "CL_GUI_FRONTEND_SERVICES======CP" |
| Screen.............. "SAPMSSY0 1000" |
| Screen Line......... 6 |
| |
|Information on where terminated |
| Termination occurred in the ABAP program "CL_GUI_FRONTEND_SERVICES======CP" - |
| in "FILE_EXIST". |
| The main program was "RSBATCH1 ". |
| |
| In the source code you have the termination point in line 8 |
| of the (Include) program "CL_GUI_FRONTEND_SERVICES======CM00X". |
|Source Code Extract |
|Line |SourceCde |
| 1|method FILE_EXIST. |
| 2|* ... |
| 3| |
| 4| CLASS CL_GUI_CONTROL DEFINITION LOAD . |
| 5| |
| 6|*-check if valid GUI is available----
|
| 7| IF IS_VALID_HANDLE( ) NE 0 AND cl_gui_control=>www_active IS INITIAL. |
|>>>>>| RAISE NOT_SUPPORTED_BY_GUI. |
| 9| ENDIF. |
| 10| |
| 11|* check parameter, wild characters not allowed |
| 12| IF FILE IS INITIAL OR FILE CA '*<>|"'. |
| 13| MESSAGE 'WRONG PARAMETER: FILE_NAME' TYPE 'I' RAISING WRONG_PARAMETER. |
| 14| EXIT. |
| 15| ENDIF. |
| 16| |
| 17|* special handling for SAPGUI for HTML |
| 18| IF CL_GUI_CONTROL=>WWW_ACTIVE IS NOT INITIAL. |
| 19| |
| 20| DATA: rc type i, filename(4096) type C. |
| 21| filename = file. |
| 22| CALL FUNCTION 'ITS_QUERY' |
| 23| EXPORTING |
| 24| filename = FILEname |
| 25| query = 'FE' |
| 26| IMPORTING |
| 27| return = rc. |
|Active Calls/Events |
|No. Ty. Program Include Line |
| Name |
| 8 METHOD CL_GUI_FRONTEND_SERVICES======CP CL_GUI_FRONTEND_SERVICES======CM00X 8 |
| CL_GUI_FRONTEND_SERVICES=>FILE_EXIST |
| 7 FUNCTION SAPLSFES LSFESU16 96 |
| GUI_UPLOAD |
| 6 METHOD CL_GUI_FRONTEND_SERVICES======CP CL_GUI_FRONTEND_SERVICES======CM013 4 |
| CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD |
| 5 METHOD CL_RSDS_ACCESS_GUI_UPLOAD=====CP CL_RSDS_ACCESS_GUI_UPLOAD=====CM001 74 |
| CL_RSDS_ACCESS_GUI_UPLOAD=>IF_RSDS_EXTRACT_DIRECT~EXTRACT |
| 4 FUNCTION SAPLRSDS_BACKEND LRSDS_BACKENDU01 304 |
| RSDS_DATA_PULL |
| 3 FUNCTION SAPLRSSM LRSSMU17 5422 |
| RSSM_CALL_RSAR_DATA_REQUEST_1 |
| 2 FORM RSBATCH1 RSBATCH1 1327 |
| START |
| 1 EVENT RSBATCH1 RSBATCH1 498 |
| START-OF-SELECTION |If i load the step manually it works. The hung step is possible to re-execute after it gets red (with context menu) and it works then. After that it hangs on the 3rd info-package and so on.
The file lays on a network drive, but i suspect it doesn't matter -
BPM when both sender and receiver systems are Sync. Please help!
Hi Experts,
I want to use BPM when both sender and receiver systems are Sync. For example: web service ---> RFC
I have tried the solution as given in the blog
https://weblogs.sdn.sap.com/pub/u/39730 [original link is broken] [original link is broken]
but it does not work. I am getting Time Out error.
Can somebody tell me the correct way of configuring BPM for sync-sync scenario?
Kindly give the integraion directory steps also.
Thanks
GopalHi Hemant,
I have already tried the solution as given in the blog (https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken])but it does not work. When I run the scenario I am getting Time out error.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please help!
Thanks & Regards,
Gopal -
Process chains time outs and hangs with no error msg - in SP13
Hi all,
We are having all kind of weird problems after we patched our system with SP13. Our process chain time outs and hangs, but surprisingly we never get any error msg. And scarier part is, the problem seems to be intermittent. PC runs fine on some days and hangs on some.
Further analysis into the dump as below
Termination occurred in the ABAP program "SAPLRSSM" -
in "RSSM_SLEEP_DEBUG".
The main program was "SAPMSSY1 ".
In the source code the termination point is in (Include) program "LRSSMU39".
This refers to an issue that appears to have been addressed by OSS Note
934648(meant for SP8). This notes also indicates to populate RSADMIN table to
exclude "RSSM_SLEEP_DEBUG". Not sure if this note is valid for SP13? However we went ahead and populated the RSADMIN table.
So now we have no clue whats going on and where to fix the issue.
As per SAP suggestion we applied the following notes:
0000653996 Analyzing lock situations
0000893563 Correction: Deadlock on completion of a remote chain
0000994007 Corrections: Deadlock with external status query
0001005481 Correction: Process successful, but there is no instance
0001047174 Correction: Incorrect scope when locking in process chains
0001051957 Correction: TIME_OUT during dialog confirmation of processes
0001083660 Report for error stack analysis
Nothing seems to help us. And SAP suggested a few options, which we implemented to no rescue.
Im sure that many of the customers have applied SP13, and want some feedback from them, if this is happening in their systems too?
If so, how did you fix this issue?
Or this situation is unique to us?Please note that no settings were changed as of SP13 to that of what they were in SP12(unless it is a side effect of the patch itself). Everything worked fine with SP12 and is still working on the BIP system. All the problems are in BIQ patched to SP13.
Any pointers or insight would be appreciated. We have a customer msg open with SAP, and going back and forth, but nothing seemed to work as of today.
Thanks,
VoodiNot sure which OSS helped us get past the issue, as SAP asked us to apply a ton of notes. But along which the notes, SAP has some suggestions for us, which we think did the magic. After the implementation of the suggestin we never faced the same issue again. The suggestion by SAP:
move the process chain callback in a batch job by executing
program RSSM_TRACE_SWITCH and selecting the flag "verifcation
of asynchronous processes - execute in batch".
Lemme know if this doesnt fix the issue, I can give all the notes that SAP asked us to apply.
Message was edited by:
voodi
Maybe you are looking for
-
Best practice - Development Lifecycle in an SSRS, SharePoint and TFS environment
Hi, We have installed our SharePoint/SSRS (in SharePoint integration mode) development environment servers and we're starting to think about the development process for moving reports to a test environment, then to a production environment. Since th
-
I don't use Mail - how do I get it to stop automatically opening?
Mail opens up all the time, and I don't like using it. I really don't like having to close a million times a day. How do I stop it from opening by itself in the first place? Is that even possible?
-
I will probably end up needing both, but right now I would like to focus on one or the other. I write aviation manuals and would like an alternative to MS Word, which so far is working fairly well for me. My typical project is 100-150 pages. I don
-
I am a new MAC user and have a question about cloning a disk drive. It appears that the "Restore" function of Disk Utility does what's needed. What is the advantage of using Carobn Copy Cloner that seems to be recommended by everyone? Thanks
-
How to view 'stereo' vs 'mono' in GarageBand 10.0.2?
How to view 'stereo' vs 'mono' in GarageBand 10.0.2? Thanks