Broken Bluetooth Connection Cable?

While upgrading some RAM and fixing the audio wire attachment on a client's mini, one of the three cables would not re-attach (one being for the Airport, and I'm not sure what the third one is). Upon further inspection, I realized that the entire port had come up with with cable. Is there any way to get this back on or do I need to buy a new bluetooth/wireless board or what? Help!

see a lot of these posts and my phone4 don't have the same cable
but also see posts about the old pin30 cable breaking
I also still use my org ipod touch 1g's cable with it and other ios devices working fine
suspect if people pull the cable rather then the connector when they disconnect the cable it wear the cable down faster

Similar Messages

  • Message through laptop using bluetooth or cable connection

    hi, can anybody tell me how to send message throgh laptop using bluetooth oo cable connection, is it anyway like nokia pc suite message option....

    Sorry. No can do.

  • PC Suite Upgrade has disabled my bluetooth connect...

    Hello!
    After using an older version of Nokia PC Suite that came with my model 6233 phone, I decided to upgrade to 6.82.22.0. The older version worked via Bluetooth without any trouble. With the new version, I can no longer make a Bluetooth connection to my phone.
    Using the PC (running Windows XP Prof.) Bluetooth connectivity software, I can see and interact with my phone. (I am using an Acer USB Bluetooth device).
    When I completly delete all pairings and pair via the Nokia PC Suite software, I can get to the point at which a pairing code must be entered. Upon entering the code and accepting via the phone. . .nothing happens. The button labeled 'next' remains gray and after waiting 20 minutes I am forced to 'cancel'. When I go back to try the process again, the phone is no longer visible. (Via the PC software, yes, but via the Nokia software, no.)
    Can anyone help me solve this problem?
    Thank you in advance for any suggestions!
    -z

    I used "Add/Remove Programmes" in Control Panel. It might also be the "Cable Connectivity solution" that Software updater installs. so I uninstalled that - but that broke my cable connection, so I could be wrong.... Either way, I'm now able to connect via Bluetooth which is the main thing.

  • Can not connect to internet using bluetooth connection with Nokia N95

    Hello!
    I'm trying to connect to internet using my Nokia N95 as a modem and connecting my Macbook Pro and Nokia using bluetooth connection. Mac says me "Can not connet to PPP server..."
    When i connect using usb cable connection between Nokia and Mac - everything is OK.
    Where is the problem?
    Thank you!

    Hello!
    I'm trying to connect to internet using my Nokia N95 as a modem and connecting my Macbook Pro and Nokia using bluetooth connection. Mac says me "Can not connet to PPP server..."
    When i connect using usb cable connection between Nokia and Mac - everything is OK.
    Where is the problem?
    Thank you!

  • NclBCBTSrv hangs, prevents bluetooth connection?

    I have had problem for years that my bluetooth connection with Nokia PC suite stops working after a couple of days. So far the only solution has been to reboot the computer.
    Recently I discovered that NclBCBTSrv.exe was using over 250MB of memory so I killed it. After that it was automatically restarted and PC suite started syncing again.
    Is this a known bug? Has anyone else seen this?
    I have WIn XP SP3 with all hotfixes from MS, Nokia PC Suite 7.1.40.1
    Bluetooth from BroadCom v 2.1.92.108

    Sure. NclBCBTSrv.exe is a background process for detecting bt connection. There're also two others: one for cable connection and another for IRDA connection.
    You can try to upgrade the blooth driver or re-install pc suite to fix.
    What's the law of the jungle?

  • Using My N73's Bluetooth connection as adapter for...

    Hey guys,
    This is not a question that can be put into one sentence...
    I shall put it as short and descriptive as possible.
    I can connect my laptop to the internet using the Built-in Modem I have in my laptop (Dial-Up).
    My brothers laptop is new, He does not have a Modem built in and I do not have any other hardware here.
    I was thinking, Is it possible to Have the following setup
    Dial-Up -> Laptops Modem -> N73's Bluetooth connection -> Brothers Bluetooth connection (on his laptop) -> Internet.
    So actualy making a Networking Bridge from My Laptops Modem to the Bluetooth of my N73.
    (I could maybe buy a Lan Cable somewhere here and make a Networking Bridge between the Modem and the Lan port, but only if this is not possible whatsoever.)
    Thanks In Advance...

    This has been a while, and I am back home now.
    What I ment is what I said, I never mentioned my laptop having a Bluetooth connection nor using my telephone as a modem. I said that I wanted to use my Laptop as Modem and my brothers laptop as the client connection through bluetooth to my telephone wich in his way would be just a bluetooth adapter for my laptop. Now I figured that out myself and I had Dial-Up Internet on both laptops.
    Since It worked I am going to ask another question hoping that you guys will just say I don't know instead of It's not possible.
    How do I configure my N73 to become my laptops Bluetooth Adapter so I can connect any bluetooth device to my laptop.
    (saves me 20 euros, but that is not the point)

  • 6300 bluetooth connectivity to PC Suite

    I am having problems with connecting my phone to my laptop.
    I start the PC Suite and click get connected, then select bluetooth connection and next. This then identifies my phone (it has a blue padlock symbol by the side of it, what does this mean?), I then highlight my phone and click next. Then next with the passcode and click accept on the phone to pair, then type the passcode in to the phone. Then the phone asks to connect with the laptop and I click accept on the phone and they are connected. In the PC Suite is says I have my phone as an available connection, however in the main PC suite menu screen I still have no connection. The PC suite does connect but then immediately disconnects its self. I don't know if it's the phone of laptop disconnecting? Why won't the phone and laptop stay connected?
    The phone does however connect when using a USB cable.
    Any suggestions or help much appreciated as this is really starting to drive my patience!!!

    Still haven't managed to find a solution, it would appear that the Laptop recognises the phone as a headset.
    Could it be security settings?
    Any help!!!

  • HT6572 Bluetooth connectivity fixed in 10.10.1?

    Wondering if Bluetooth connectivity and performance is fixed in OS X Yosemite 10.10.1? I still have issues before updating that include my apple keyboard + magic Trackpad randomly disconnecting, input lag, and disappearing profiles in the bluetooth preference pane.
    My machine is a late 2012 Macbook Pro Retina 15". I use it in clamshell mode connected to an external display via a thunderbolt to HDMI adapter.
    I occasionally run the machine open in this configuration, with the power cable detached in order to power cycle the battery, as I've heard it is bad to leave the power cable always connected. The Bluetooth issues are more prevalent when operating on battery power for the macbook pro.

    I'm having issues now after the update with my Magic mouse that I never experienced before. It seems if now when I put my laptop to sleep (ex. close lid or just timeout) when I re-open or start my laptop I have no connection to the paired mouse. The little green light on the bottom of the mouse blinks twice real fast.
    Now the only way I can restore mouse function is to remove it from the bluetooth profile, wait til it sees it when searching and re-pair the mouse.
    This is very annoying and frustrating as sometimes it will not find the mouse when searching for bluetooth devices until I restart my computer. I really hope they fix this soon as it occurs everyday now.

  • 6230i Bluetooth connectivity problems

    Sorry for long posting...
    I have recently purchased a 6230i to replace my 6310i.
    I previously used a CA-42 USB cable for the 6310i but that is reported by the 6230i as incompatible - grrh.
    And now I am trying to set up the Bluetooth connectivity.
    I have (eventually) managed to get the 6230i paired to my Laptop using a Belkin USB Bluetooth and the Belkin software running on WinXP (IBM T41 laptop). PC Suite runs but seems to be a little unreliable over Bluetooth - will address that by sourcing a DKU-2 cable.
    However, I have problems with pairing the 6230i with my Sony HBH-600 headset (works perfectly with 6310i) I can get the 6230i to discover the headset either by searching for audio enhancements or by setting up a new pair, however it always fails to set up the connection (never asks for passkey).
    Similarly I cannot get my Ipaq 5550 to pair with the 6230i. I can start the pairing from the Ipaq which finds the 6230i but the 6230i never acknowledges the pairing attempt which then fails. If I start the pairing process from the 6230i it finds the Ipaq and attempts to pair but never asks to setup a passkey - the Ipaq does not seems to receive the pairing attempt.
    I have set the auto connect option to yes and no with no difference.
    Any suggestions ?
    Needless to say all this worked perfectly with the 6310i.
    Tech. Project Manager
    Reuters

    Further to original post
    The Bluetooth connectivity all works between the IBM T41, Ipaq 5550, Sony HBH600 headset and a Nokia 6810 phone.
    So the problem appears to be the Nokia 6230i phone.
    Further research gives some rather disapointing information.
    http://www.geekzone.co.nz/content.asp?contentid=2629
    If you have problems performing pairing between an iPAQ 1940/2210 and the Nokia 6230 and continually get an error similar to "Cannot pair devices for security reasons" then it's related to the problem outlined in that document.
    This is a Hardware issue and not a software issue related to the WIDCOMM BTW-CE Product. There are two types of keys that can be used for pairing:
    - Combination keys
    - Unit keys
    The key type that is used is pre-set in the Bluetooth Radio Firmware. The WIDCOMM BTW-CE Bluetooth software
    does not control this setting. The radio on the iPAQ 1940 uses unit keys by default. These Nokia phones reject the use of unit keys in pairing because it is not as secure as combination keys.
    Users of older HP iPAQ models should check the HP Drivers page for the latest OS or Bluetooth software for their devices.
    I note that my Ipaq is older than the two models mentioned and that my headset is 16 months old. So it looks as if the 6230i is going back - stupid no backwards compatibility.
    thanks to Geekzone for the info.
    Tech. Project Manager
    Reuters

  • Windows Media Player 11 Bluetooth connect with N73

    Anyone can help me with connecting N73 to Windows Media Player via bluetooth?
    I have Nokia PC Suite updated and Bluetooth connects with it.
    I can see it on "My Computer" folder as a phone and also as a camera.
    In Device Manager, i can also see it as a "Portable Media Device"
    But Windows Media Player doesn't seem to detect it when it is connected to PC via bluetooth. Only when connected by cable. But as I want to get rid of the cable, how should I manage this?
    Thank you very much.

    As you are using Windows 7, you can use this extension from Microsoft - http://www.interoperabilitybridges.com/html5-extension-for-wmp-plugin

  • Nokia 6280 connectivity cable/PC Suite

    hi! i have a new 6280 and have installed all PCSuite and cable drivers software and updates. i have a CA-53 cable. below are all the specs. i followed installation instructions correctly. when i get to the Get Connected setup window, i click "cable connection", then "next" and connect the phone and cable to the pc. nothing happens in this window, but i get a windows error message that says "the device has malfunctioned" and "windows doesn't recognise it."
    after a minute or so, my phone sees it has a cable connected and i choose the default mode, but still the "Get Connected" setup window doesn't see it, and windows gives the same error message bubble as before.
    i tried selecting the phone in PC Sync, but it doesn't find my phone.
    i also check the settings for "cable connection" in the Connection Manager, but the configure button stays deactivated. i've tried rebooting, uninstalling/reinstalling, but nothing works to continue with the setup. the only thing that seems to have worked is in "My Computer" i can see the Nokia Phone Browser and access that. but it only shows how to add a new contact or write a text message.
    now i'm just wondering if i need to have my phone chip card activated, meaning that it's online and can make calls. well, it won't be activated for another week. is that what this is all about? if it is, it's not clear in the setup. it only states that this section of the setup is for connecting the phone to the computer, and no mention at all about connecting to the internet or my phone line provider.
    all i want to do is continue the installation of the software and i want windows to recognise it.
    i checked the help files and did as they say. the device manager has no listing of any nokia products - wireless or otherwise.
    please can you tell me what to do? thanks.
    Operating system:
    Microsoft Windows XP Build 2600 Service Pack 2
    Nokia PC Suite: Version 6.81.13.0
    Connectivity Cable Drivers: Version 6.81.1.2
    Bluetooth stack: Microsoft Bluetooth stack Version 5.1.2600.2180

    While phone connected to PC, right click My computer - manage - device manager and see if there are any unknwn yellow question mark devices. If yes, highlight it - right click - uninstall.
    Boot PC
    Also battery boot your phone and run factory settings to it.
    Now connect the phone again and see if it pops up the question about the USB mode right away (that is how it should work and not wait for a minute to appear.
    I have 6280 and I tried to connect it without the SIM card and it connected normally. I also got the question in phone about the USB mode immediately.
    But, I don't know is there a difference if you connect the phone to PC first time ever without a SIM
    If it continues to be so that the USB mode does not pop up, I would consider taking the phone to a service center.

  • Nokia Connectivity Cable Driver repaired but still...

    Hey there, I had moved messages stored in the phone to PC via Nokia Suite before, however I got a nokia connectivity problem so nokia suite cannot detect my phone/search it via bluetooth now.  I tried to fix it by using the method of repairing ‘Nokia Connectivity Cable Driver’ but it doesn't work.  Everything went smoothly but still nokia suite cannot detect anything.  So I may need to reinstall the whole nokia suite but the main concern is that if I reinstall my nokia suite, the SMSs stored in the Nokia suite will lose is it?  So may i know what I can do?
    Phone: Nokia 5800 XpressMusic
    Version of Nokia Suite: 3.8.48 (should be the latest)
    Computer: Windows 7
    Thanks.

    Thanks however, the problem is that Nokia Suite cannot detect my phone so how can it copy the text to the clipborad?

  • Connectivity cable for 2700 Classic

    Is it possible at all to obtain a connectivity cable for Nokia 2700 classic.  The website doesn't list it and stores don't seem to have it!  Merry Christmas and a great New Year!

    I suspect it is the CA-101 but can't confirm this. You can also connect your phone to pc using bluetooth. 

  • Send SMS via Bluetooth connection

    Hi,
    I have connceted a moblie to my PC through bluetooth (using Bluesoleil)
    Now using program I need to send message to that mobile, such that that mobile should transmit an SMS.
    message from Pc should contain the payload message, SMS receiving phone number.
    Pc -----<bluetooth>----------> mobile -----------Transmit-------------> SMS receiving mobile
    message SMS
    Try to help me with code or Suggest me to proceed
    Thanks in advance.

    Hello Johnerlit do u have any idea regaring this topic?
    Hello everybody!
    I am under a process to send sms from server that is a PC to a mobile through a mobile, which is connected to the PC act as a modem.
    According to my process if the modem is GSM or CDMA, should transmit the sms, that obtained a message from PC.
    The connection between the PC and the modem should be through bluethooth, but at initial I wish to try with data cable before trying with bluetooth connection.
    I should not use any sms operators like Clickatell..
    Can anyone say me is it possible to use J2me in Pc to develop the application and connect to the modem...
    If I am wrong plz say me ur suggestion on how to proceed with this process, and also say if anyother better way is there to do.
    Thanks in advance

  • Bluetooth connection cant establish with N97 mini ...

    Hello all,
    My N97 mini cant establish bluetooth connectivity with my Laptop(thoshiba A 300- Windows Vista Home prem).
    The result same in all cases..like  PC suit/Ovi Suit / Normal pairing for sharing files!!
    But the device can be connected/paired with any other mobiles for file sharing, hands free etc..
    Earlier I failed to connect it with usb cable in my system. but now its working with another desktop (Wind XP)
    I formatted my laptop and reinstalled windows ( installed all drivers) .. But again problems same.
    NOTE: Bluetooth connection possible to any other devices from my Laptop. The problem ONLY with my N97 mini and Laptop
    Does anyone have similar experience as mine?
    What should I do to fix this issue?
    I am sure my Laptop working 100% normal as I formatted and reinstalled by factory settings.

    Thank u for ur advice.
    I have done as u mentioned by applying paches on my bluetooth driver and it installed successfully.
    But Stil my connectivity problem with my mobile exists as before..
    hadimassa wrote:
    Check the latest Toshiba Bleutooth drivers.
    http://aps2.toshiba-tro.de/bluetooth/?page=download

Maybe you are looking for