Broken Bonjour with Canon MF4350d after 10.6 upgrade - Help Please.

I have been using a Canon 4350d with no problems with 10.5.8 - including Printer Sharing (Bonjour). Now, after updating to 10.6 (now 10.6.2) I can still print fine, but I have lost all Printer Sharing. All settings appear to be right, and my other macs appear to be printing through the one connected via USB to the printer, but it never goes through. HELP Please. Thank you.

According to the UFR2 User Guide on page 2-8, the driver can be removed from the Mac by trashing the following folders. Note that you should delete the print queue first, by opening Print & Fax, selecting the MF model in the Printers list and pressing the minus button.
System Volume > Library > Printers > Canon > UFR2
System Volume > Library > Launch Agents > jp.co.canon.UFR2.BG.plist
System Volume > Library > Printers > PPDs > Contents > Resources > en.lproj > CNTD**Z*2.ppd.gz
(where * indicates the printer model and 2 indicates the language of driver used)
With these files removed you can then empty the trash, although you may have to open Activity Monitor and stop the 'UFR II Backgrounder' service before you are able to remove all the files from the trash.
With the v2.10 driver removed you are ready to add another driver. However you need to be aware that the v1.80 driver cannot be used on 10.6. If you were using it previously then it would suggest that the 10.6 Mac was an upgrade from 10.5 rather than a clean 10.6 install. On a clean 10.6 Mac, then v1.80 driver will not operate correctly.
What you may be able to do is have the v1.80 driver installed on a Mac running Leopard and shared. You may then be able to use the v2.10 driver on the Snow Leopard Mac's to print to the Leopard share using the v1.80 driver. Note that I haven't tried this so I cannot say if this will work for you. Personally I always ensure I get a printer with Ethernet or wireless support so that I can avoid printer sharing...

Similar Messages

  • I uploaded 2 powerpoints with no problem, now it looks like it has uploaded to icloud but the icon is a page with a "P" on it. Any help please?

    I uploaded 2 powerpoints with no problem, now it looks like it has uploaded to icloud but the icon is a page with a "P" on it. Any help please?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I'm getting error 205 when trying to install ID with Creative Cloud on Windows 7. Help please.

    I'm getting error 205 when trying to install ID with Creative Cloud on Windows 7. Help please.

    Creative Cloud Help / Error downloading Creative Cloud applications
    http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

  • Hi, I have tried repetedly to install flash player on my mac mini with no luck..... help please !

    Hi, I have tried repetedly to install flash player on my mac mini with no luck..... help please !

    How to perform a "clean install" of Flash Player in Mac OS X

  • When I disconnect my iPhone 4s from the charger, it gives me the dial pad with a emergency call option... help please?

    When I disconnect my iPhone 4s from the charger, it gives me the dial pad with a emergency call option... help please?

    Hello there, curtq.
    Great job troubleshooting your issue so far. The following Knowledge Base article offer some great practical steps for troubleshooting Wi-Fi issues with your iOS device:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    If following the initial troubleshooting steps recommended at the beginning of the article, you may want to then proceed to:
    Unable to access the Internet while connected to Wi-Fi
    If you're using a public or commercial network, you may need to log in or subscribe.
    Check to see if you have a self-assigned IP address:
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
    If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
    If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
    If they do not, consult with your network administrator or ISP for further assistance.
    If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My iiPad mini is lagging to much after ios 7 upgrade. Please apple solve this issue. Games which are running smoothly in ios 6 lagging too much.  This is the worst experience  Apple

    my iiPad mini is lagging to much after ios 7 upgrade. Please apple solve this issue. Games which are running smoothly in ios 6 lagging too much.  This is the worst experience  Apple

    Settings>General>Reset>Reset all settings.
    *Note:* Settings, preferences, network settings, etc *will* be reset. *NO data or media will be lost*
    and/or
    Settings>iCloud>Documents and Data (turn it OFF)
    If you want to voice your opinion, please do so here:
    http://www.apple.com/feedback/

  • Trouble with Canon 2020Adv after upgrade to Maverick

    Hi
    We've just upgraded to Maverick and our office Canon 2020Adv no longer even acknowledged print jobs sent to it from the Mac.  I followed the comments in earlier posts re problems with Canons post Maverick upgrade and downloaded and installed the new driver.  Now I can get the printer to acknowledge that a doc is being sent but it either printer gobbledygook (sorry don't know a better word for it...) from Word or takes forever "processing" and never actually prints anything from Safari....
    Any suggestions??
    Thanks

    Two possible causes for the issue you are having.
    1. You are using the Postscript printer driver but your iR ADV C2020 does not have the optional Postscript printer kit. In that case, download and install the UFR 2 v10.3.0 driver
    http://support-au.canon.com.au/contents/AU/EN/0100491502.html
    2. If you are using the UFR2 driver already, you may have created the print queue using the IPP protocol. The UFR2 driver does not support this. So remove the ADV C2020 from Printers & Scanners and add again, this time selecting HP Jetdirect-Socket for the protocol.

  • HTC Sensation no longer pairs with iPad 3 after IOS 6 Upgrade

    HTC Sensation no longer pairs with iPad 3 after IOS 6 Upgrade

    Lots of people having this problem? Hmm. For what it's worth I haven't seen that problem on my iPad 3
    This is a user to user forum so no one here would have any idea whether there is a real problem and, if so, whether Apple is working on a fix.
    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

  • Serious problem with X1 carbon after windows 8 upgrade

    Hello,
    I've just purchased my new X1 carbon this week, came with 3 discs to upgrade it from Windows 7 to 8. Now I've followed the steps and everything worked fine. But, my laptop lags A LOT. For example, while I am using on it, the "writing/reading to SSD" lamp lights up and my laptop hangs up for seconds then it's back. It keeps doing this multiple and multiple of times!!!
    Any help please!

    Victorymarketin, welcome to the forum.
    Since they are both Microsoft programs, I suggest contacting MS Customer Service for help.  They have always gotten me up and running in short order.  This is always my solution when I have MS related problems.  They if anyone can, will solve your problem.
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • After effects and photoshop ,,,help please

    hi all
    can anybody help please.
    ive been making a short film with my son and putting some basic effects in, just for a laugh.
    i noticed an effect on ADOBE TV that was done by Gareth Edwards in his movie MONSTERS which i thought would be good to try out in my film but i carnt get it right,,
    here is the link to that effect...            http://tv.adobe.com/watch/customer-stories-video-film-and-audio/monsters/
    its the effect where he changes the menu board in a cafe to one of his infected area signs, he allso changes a few other signs.
    in the video he say that he exports a still frame from after effects into photoshop and puts on his image {with a few tweaks her and there}, when hes got it ok in photoshop ,it some how updates in after effects??
    can any please help ,thank you

    It's a simplified explanation of the process.  He left out explanations of motion tracking and perspective matching that were most certainly required for the shot being discussed.
    If you are doing the same process to a static, locked off shot, with no foreground objects passing in front of your sign, it would be very possible to create a single frame in Photoshop and just layer it over your scene in AE.  But once the camera moves, you will need to understand Motion Tracking.  If objects pass in front of the replaced component, you will need to understand Masking.

  • Z10 won't complete setup after device software update, help please.

    Help please, cannot complete phone setup ater performing software update using Blackberry Link.
    Sequence of events;-
    Phone recognised by Blackberry Link.
    Reload device software selected - updated version 10.0.10.90 available.
    Get update - software appears to load correctly then Z10 unplugged.
    Phone reboots, Welcome to Blackberry, English(UK) ticked, swupe left.
    No SIM card available, swipe to WI-Fi.
    Password entered for home network and confirmation screen shows connected.
    Agreement Screen - Country changed to United Kingdom(English),
    at bottom of screen under I agree to the Blackberry SLA....
    the 'I Agree' and 'I Do Not Agree'  buttons can not be selected and
    after a short delay Unable to connect screen appears.
    Pressing 'Settings' goes back to Wi-Fi Networks page with
    confirmation that connection is good and round we go again.
    Having performed software update several times as above and also from
    www.BlackBerry.com/updates by following forum posting at
    http://supportforums.blackberry.com/t5/General-Bla​ckBerry-10-Smartphone/How-
    to-Reload-your-Blackberry10-OS/td-p/2187545
    and getting the same result each time I would appreciate help to resolve this issue.
    Solved!
    Go to Solution.

    Try finding a different open free Wifi hotspot to perform the setup.
    It sounds like the device is never connecting to your WiFi to complete the setup.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • No vídeo in my TV with original cable component and Ipad air, help please.

    How can I see my Ipad air and moviles in my TV with the original component cable, at the moment no works.
    Help please.

    Hey adbridge683,
    This is usually in reference to USB issues. This article has great step by step troubleshooting, so you can see the steps first hand yourself to try. http://support.apple.com/kb/ts3694#error50
    There's really only about 7 things to look for in there, and I hope that one of them helps you out!
    Let me know.
    -Regards

  • How can I uninstall Maverick and reinstall snow leopard? My mac hasn't been the same since I upgrading to maverick. Runs slow, crashes, can't cope with normal functions.... Help, please help

    How can I uninstall Maverick and reinstall snow leopard?
    My mac hasn't been the same since I upgrading to maverick. Runs slow, crashes, can't cope with normal functions....
    I need to go back to leopard or buy a new MacBook Pro!
    Help, please help

    Revert to a Previous OS X
    Revert to former OS from Mavericks
    Revert to Snow Leopard

  • Problems with Canon ip4200 after upgrading from panther to tiger.

    Hello
    I have recently purchased a lovely new imac 24", everything is great apart from my my printer which is now printing pictures with a lovely magenta cast over all my photos.
    From googling around I think it might something to do with having a double printer profile on? But the actually printer doesn't seem to have much options to play around with.
    If anyone has any idea of what's happening or how to sort this out I would really appreciate it as after MANY hours of googling I am now totally perplexed!
    Thanks
    Rosie

    Hello Rosie,
    For starters, please ensure you have the latest driver for the iP4200 installed. You can get this from the Canon Europa web site. The version is 4.8.3. With the new driver available, follow this procedure to remove any previous version before installing this later version.
    1. Open Printer Setup Utility, delete the iP4200 queue and then click on Printer Setup Utility and select Reset Printing System.
    2. Close the Printer Setup Utility.
    3. Go to Library > Printers > Canon and delete the contents of the BJPrinters folder.
    4. Go to Library > Receipts and delete the file Canon iP4200 xxx.pkg
    5. Empty the Trash
    6. Restart the Mac
    7. Install the latest version of the Canon driver (4.8.3)
    8. Once the driver installation is complete, go to Applications > Utilities and open Disk Utility. Run the Repair Disk Permissions option.
    9. Open Printer Setup Utility and click Add.
    10. Select the Default Browser view and select the Canon printer connected via the USB port. The Print Using menu should automatically change to Canon IJ Printer.
    11. Click Add to add the printer.
    With this latest driver installed, print your photo and check your output. If there is still a magenta tinge, open the driver settings and select Quality & Media. Try a different media type, such as Photo Paper Pro, and also set the Print Mode to the photo setting. If you are printing from iPhoto, then open Color Options and ensure you have the Color Correction set to BJStandard.
    If you are printing from PhotoShop, then open Color Options and ensure that Color Correction is set to ColorSync so that the ICC profile associated with the paper type selected above is used.
    If you want to check the gamut of the respective paper types/profiles available to the printer, you can open the ColorSync utility and expand Others > /Library/Printers/Canon/BJPrinter/...Here you will see the available profiles for the respective Canon paper stocks and their colour gamuts. The MP settings are Matt Paper, PR is Photo Paper Pro and SP is Photo Paper Plus Glossy.

  • Unable to print with Canon iR2018 after updating OsX Mavericks

    Hi,
    there's anybody who can help me in finding canon ir2018 drivers for osX Mavericks?

    Here is a link to the Canon UFR2 v10.2.0 driver that supports your iR2018 on OS X 10.9.
    Please note that when adding the network printer you must use the LPD protocol and select the correct printer model, which will be listed as "Canon iR2018". Do not select the iR2018 that shows UFR II in the model name as this will be for the older v2.43 driver which is not compatible with OS X 10.9.

Maybe you are looking for