Broken. Can not log in anymore.
Sorry if this is in the wrong place, but the form above wouldn't let me select anything else. Likewise, I can't seem to find anyone or anything that is willing or able to help, so this is my last resort. My Skype literally just stopped working today- throwing an error and now I cannot use the program at all. I'm at a loss- the only thing I could find was a news article stating that there is a problem, but it could take "weeks" for Microsoft/Skype to roll out a patch for it, which is ridiculous for a product of this nature. I ahve tried unistalling and reinstallign to no avail- what should I do now? I'm up for anything at this point.
kkawin45 wrote:
Can not log in another Blackberry ID eventhough I have already sign out(and wipe out data automatically) previsous
Blackberry ID from the same the device.
Please someone kindly assist ASAP.
PS. Do I need to deassociate both via device & email?
Hello kkawin45
Welcome to BlackBerry Support Forums
You cannot use multiple BlackBerry ID on your BlackBerry 9900 at a same time ! On BlackBerry 7 devices BlackBerry ID is deep integrated with our device . If you want to use a new BlackBerry ID then perform a security wipe , while wiping be sure to Mark everything ( User Installed application , Emails ) but after a full backup .
Refer to this KB Article for help :
KB26694 : How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Similar Messages
-
I have a Document Center protected document - it's a test one, that simply needs a valid AdobeID and Password to open it.
A new user can not log in and view it, older users are OK. He can log in, change has password etc, but when he tries to open the pdf, it will not accept his user name/password saying "The email address or password you entered is incorrect or you need to update your Adobe Online Centre Account. Please enter your email address or password again, or click the Manage My Account button below for help with your account". He has tried both but gets nowhere - with Manage My Account, He can log in and see his details, change password - but still can not open the pdf!
Can anyone please help?
I notice the link to Document Centre support now fails - is there any support for Document Center anymore?Hi Chetan,
You may check this thread to find your solution:
Re: Two licences but only one is visible
Thanks,
Gordon -
I installed firefox on my new computer.
Since that moment I can't log in anymore with my Wortdpress-account in Firefox.
With the explore it works, on other computers firefox also works,
What do i rong on my new computer ?
is it an plug-inn i have to install ?Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
Can not log on after successfull installation - SAP Netweaver Trial JAVA
Hello,
I have successfully downloaded and installed the NW Java trial. (NW_JAVA_700SP14_SR3.rar)
I can see in SAP MMC that all the services was started. At http://vjm:50000 I can see the default page.
Unfortunately I can not log on to any page that need SAP authentication (eg. User management, NW administrator),
but can log to pages which needs just basic browser authentication (eg: Web Service Navigator, UDDI client, System Information).
The portal also does not let me log on (http://vjm:50000/irj ).
When I get the standard SAP NW log on screen, after entering Administrator with the correct master password, simply the log on screen appears again (the password field is cleared). I also tried some incorrect user name / password just to check the difference. In that case I got the correct error message.
I installed the software with WMware, Windows 2003 server, allocated enough disk space and 1.6Gbyte RAM. The installation finished without errors. Prior, I installed the MS loopback too (tried without it too). In SAP MMC everything is green, only have an open alert in J2E 00 -> Services -> Security -> Aggregated Data -> Invalid session count "262 > 200 last reported value above treshold".
I am using the standard internet explorer coming with Win2003 server.
Tried the users: Administrator, SDM, Guest, ADSUSER. I know that the password is correct, because I don't get any error if I use it, just getting the log on screen back ...
Could anyone pls help me how can I log on to the system? Or is there any security trace file or log which could help me solve this problem?
I am desperately trying to install this trial, I completely reinstalled the software 5 times but still can not use it
LaszloHi,
is your problem persisting?
CAVE: If you use a wrong user/pw combination > 3 times the account of the user may be locked!
try j2ee_admin instead of administrator or try adm together with your Masterpassword
Do you have to specify the users pw inside the installation procedure? In "normal" installations this has to be done.
If not the pw´s in the documentation of the previous answer`may fix your problem.
The sap mmc is irrelevant for user authentication.
Green means your system is running, nothing else.
kind regards
Tom -
Admin can not log in after migration Teaming
Hello,
I did migrate Teaming 1.0.3 (SLES 10 SP2) to Teaming 2.1 (SLES 10 SP 2) on a different server according to information from this web site Novell Documentation
Everything worked with one exception admin account can not log in :(
The rest of the account works, but users are taken from LDAP.
I tried to use the old admin password as well as a new admin password set during installation Teaming 2.1
In catalina.out log I got:
WARN [http-9080-1] [org.kablink.teaming.module.authentication.impl.Aut henticationModuleImpl] - Authentication failure for zone 1: org.springframework.security.BadCredentialsExcepti on: Bad credentials; nested exception is org.kablink.teaming.security.authentication.Passwo rdDoesNotMatchException: Password does not match for user [kablink,admin]
I think that something has gone wrong with the admin account password after the migration but I do not know how to fix it.
I tried to change the password for the admin account directly in the database table but I do not know what hash algorithm is used by Teaming 2.1
Does anyone encountered such a problem?
How can I set a new password for the admin account directly in the MySQL database?
Best regards,
Piotr SzewczukOriginally Posted by pszewczuk
Hello,
I did migrate Teaming 1.0.3 (SLES 10 SP2) to Teaming 2.1 (SLES 10 SP 2) on a different server according to information from this web site Novell Documentation
Everything worked with one exception admin account can not log in :(
The rest of the account works, but users are taken from LDAP.
I tried to use the old admin password as well as a new admin password set during installation Teaming 2.1
In catalina.out log I got:
WARN [http-9080-1] [org.kablink.teaming.module.authentication.impl.Aut henticationModuleImpl] - Authentication failure for zone 1: org.springframework.security.BadCredentialsExcepti on: Bad credentials; nested exception is org.kablink.teaming.security.authentication.Passwo rdDoesNotMatchException: Password does not match for user [kablink,admin]
I think that something has gone wrong with the admin account password after the migration but I do not know how to fix it.
I tried to change the password for the admin account directly in the database table but I do not know what hash algorithm is used by Teaming 2.1
Does anyone encountered such a problem?
How can I set a new password for the admin account directly in the MySQL database?
Best regards,
Piotr Szewczuk
I **think** that hash is specified in the installer.xml file. Try also to post your question on the kablink forum: Installation, Configuration, Customization -
Can not log in another Blackberry ID in the same BB device
Can not log in another Blackberry ID eventhough I have already sign out(and wipe out data automatically) previsous
Blackberry ID from the same the device.
Please someone kindly assist ASAP.
PS. Do I need to deassociate both via device & email?kkawin45 wrote:
Can not log in another Blackberry ID eventhough I have already sign out(and wipe out data automatically) previsous
Blackberry ID from the same the device.
Please someone kindly assist ASAP.
PS. Do I need to deassociate both via device & email?
Hello kkawin45
Welcome to BlackBerry Support Forums
You cannot use multiple BlackBerry ID on your BlackBerry 9900 at a same time ! On BlackBerry 7 devices BlackBerry ID is deep integrated with our device . If you want to use a new BlackBerry ID then perform a security wipe , while wiping be sure to Mark everything ( User Installed application , Emails ) but after a full backup .
Refer to this KB Article for help :
KB26694 : How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Please help - I've upgraded to ML 10.8 (and also 10.8.1) and i can not log into icloud.
I get an error saying "You can not log in at this time". I have no hair left on my head because I've pulled it all out!
Now, there are many published fixes for this, but NONE work. I've tried everything I can find:
Yes, I have an AU and US apple ID, and both dont work
I installed ML from a fresh disk wipe + install. No baggage from previous OS's.
Everything is standard, no tricky fixes or apps
No Little snitch installed
Have deleted the ~/Library/App Support/iCloud folder
Have deleted any preference files
Have opened up the permissions on the ~/Library/Caches/iCloud folder
Have reset keychain
Have deleted all references of any @me or @apple accounts
Have re-installed the ML OS from a DIFFERENT bootable USB stick
No proxies, SOCKS, or mods to network
Plain old home WIFI network, never had a problem
Have icloud successfully set up at work (QC 2.8GHZ Mac Pro 2010), on my iPhone, iPad and Macbook Pro - Zero issues
The mac having problems is a 2008 iMac, Core2Duo 2.8ghz Intel w 4gb 1067mhz ram) - Runs well, use for design.
Is it a problem with the iCloudHelper process not having sufficient permission to write to the iCloud user DB? or the Accounts folder?
Have looked into console, and when I try and log into iCloud, I get these three errors. Same every time, no matter which apple ID account you use:
1: AOSKit ERROR: (System Preferences[352]) AOSKC ([email protected]): Failed to store key, couldn't add kc item, error 100013 (service=iCloud, dsid=146089737)
2: AOSKit ERROR: (System Preferences[352]) AOSKC ([email protected]): Failed to store account info key (dsid=146089737).
3: AOSKit ERROR: (System Preferences[352]) Failed to store account info for appleID=[email protected]
Please help! Is this an incompatibiloty with the iMac problem, or a ML problem?
Much appreciated
RickWhere EXACTLY are you trying to log in to it?
Through your web browser at iCloud.com?
Or through the iCloud system preferences pane on your Mac? -
I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
ACL found but not expected on Users
Repaired "Users"
ACL found but not expected on Users/.localized
Repaired "Users/.localized"
ACL found but not expected on Users/Shared
Repaired "Users/shared"
ACL found but not expected on Users/Shared/.localized
Repaired "Users/Shared/.localized"
Permissions repair complete.
But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable. -
what is the difference between Safari 5.1.7 and 5.1.10?
I can not log on to my website, so that their customer service has said that they are using Safari 5.1.7, and I use 5.1.10 (which I have installed on my computer, Mac)Might be the security fixes > Safari 5.1.10 for Snow Leopard
-
I can NOT take the continual freeze ups of my entire browser even worse when updating a page let alone just opening email. I closed the browser and have had to use even just microsoft or Google since this Firefox has gotten so horrible...
I clear my history and my cache so many times a day I can not keep track anymore and that is insane to have to do it as many times as I am even worse that it does not help in the least!
I have used Firefox for years now but if I have to remove it and switch to a different one by the days end I will and I will post in Facebook to all my friends who I had switch to Firefox what and why though some have already just switched to other browsers.First, that cannot be an iBook G4 as that machine cannot run Snow Leopard let alone Mountain Lion. To run Snow Leopard it has to be an Intel processor, not a G4. What does it show as the Model Identifier in About This Mac, More Info, System Report, Hardware, Model Identifier?
Second, if you have erased the hard drive there should not be remnants of any prior content. Even though Disk Warrior is saying nothing is wrong with the hard drive, it sounds as though there are problems. You may want to consider simply replacing the hard drive so there are no questions about faults. A good source is OWC, http://www.macsales.com where they also have on-line videos showing how to do the replacement.
Third, you could also try again to restart using the Snow Leopard DVD/CD and use Disk Utility on that install disk to erase again, and do it a couple times, then try to install. If it continues to refuse, then it sounds as though there is a fault with the hard drive. -
Since I can not log in bug report page, not even getting an error message, I'll write all my issues with ios8 here... I have an iphone 4S and I did the last update. Now I am in trouble.
1. When I move the "sound on/off" button, I get it buzzing 10 times before the setting is changed and I can do anything else, just not reacting to the round button on screen touches.
2. Impossible to copy text from most websites into notes.
3. Impossible to delete an email account in settings.
4. Uses up the battery twice as fast as before. I have "update apps" setting turned off, just reading a couple of mails, making a couple of photos and open maps apps twice a day, and the battery is dead well before the evening.
5. Got extremely slow, and it was getting slower and slower with every system update.
I'm sure I forgot something... But well, that already a lot.Well, actually number 3 in my list is not true any more, I just tried to delete my account 15 times, then I've written my post, then half an hour later my Settings finally updated my accounts list. Whohoo
I did not try restoring it yet, thank you for the link! -
Can not log in to Creative Cloud. Repeatedly get "You've been signed Out" ... Rebooted, reinstalled, changed password. God, I am reallly starting to hate this...
[ Private information removed by moderator ]Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
And, just in case you ever have this problem...
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
Also, this is an open forum, not a direct line to Adobe support... please do not post personal information that may be harvested by a "spam bot" -
After upgrading to Snow Leopard, I can not log into the computer. What Can I do?
after upgrading to Snow Leopard, I can not log into the computer. What Can I do?
SqueezeAce wrote:
after upgrading to Snow Leopard, I can not log into the computer. What Can I do?
Stick the 10.6 disk into the machine and reboot holding the option/alt key down on a wired/built in keyboard.
On the second screen, under the Utilities menu is a Password Reset, use it.
Step by Step to fix your Mac
What this will do is reset the password and the user account permissions in the process.
You might have problems with Keychain afterwards, to fix that.
https://support.apple.com/kb/HT1631 https://support.apple.com/kb/TS1544
If your still having trouble, look through these User Tips
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50 -
I have a problem in imessages I can not log on
I have a problem in imessages I can not log on and update through the application.Every time you logon work shows me a message saying "The server encountered an error processing registration. Please try again later"
This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 3
From the menu bar, select
▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 4
Back up all data, then take the steps suggested in this support article.
There are five steps in that article. Please take all of them. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 5
From the menu bar, select
▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 6
Select from the menu bar
▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 7
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 8
Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 9
Reset the NVRAM.
Step 10
Reinstall OS X.
Step 11
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. -
HT5622 i can not log in app store (iphone5)
i can not log in app store
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US
Maybe you are looking for
-
Rendered preview files not loading after mavericks software update
Once I render and save a project, exit out, and come back in, the rendered files that I "saved" are not rendered. This all happened after the mavericks software update
-
ME6H - all the automatically evaluated criteria are not accesible
Halo, I will to see a history of vendor evaluation (ME6H), but I have no chance to see there all the automaticaly evaluated criteria like PRICE atc. Do you have any idea where (or how) I can see all the automatically evaluated criteria together? Than
-
Report Custom object with product?
if I want to create a report with the fields of a custom object in relationship with the fields of the product,is possible? Because when i cilck in Analytics there aren't Custom Object link and in Product History isn't present the Object link where i
-
Modify fields in Append Structure
Hi there, I am driving crazy about append structures. We appended a few fields to KNA1 - e.g. a field that keeps a version number (every time a record changes we want to increment the version starting with 1 at creation time). We found a lot of mater
-
Can any body tell me what will be the security issues may commonly come after a upgrade Thanks in advancd