Broken Command Key

Hi all. So, this weekend after 3 1/2 years of tender love and care, I spilled coffee on my keyboard. It wasn't very much and I cleaned it off asap with napkins, but now my left command (apple) key no longer works. It isn't sticky or anything,it just does not work. The backlighting on it does still work fine so I'm not sure if the electrical connection is fried or not. What should I do? It is no longer under warranty and I don't have the moolah to pay apple or pretty much anyone else for a keyboard replacement.
Thank You

You should not use your computer after a "spill" for approximately 48-72 hours to make sure it is completely dry.
Immediately disconnect all peripherals, power cord & remove the battery. Turn the computer over with the lid partly open and the hinge facing upward to let the liquid drain. Do not flop it over and lay it flat - you want to separate it from the moisture. Place paper or cloth towels under the machine to sop up the mess.
After the computer disgorges whatever you spilled on it, don't turn it on for 72 hours or longer. You want to computer to dry out completely before turning it on again.
Some users here swear by hairdryers. Blow drying the innards may bake whatever was in the liquid onto delicate computer components. Better to let the computer air dry.
Use plain tepid water to clean out the computer. If you spilled iced beverage more than likely this ice fried the hot motherboard.
Sugary, acidic or milky drinks will almost always cause problems later on as the residue starts slowly corroding the computer innards.
Swab down any sticky parts with distilled water or denatured alcohol.
If none of the above works, you will need to take the computer to a repair shop. Since you do not have Apple Care, start saving your money.
How to remove and clean your Macbook Pro Keyboard
Cleaning Macbook keys after a spill
Message was edited by: CMCSK

Similar Messages

Left command key has broken off - how to replace?

So a few days ago I caught my left command key with my nail and the top half of it lifted away from the mechanism underneath. I pressed it until I heard it click back into place and then merrily continued using my computer as usual. Today I was typing and the whole thing just came off under my thumb, which is annoying to say the least.
The biggest issue is that as I was trying to reconnect key to mechanism, the little criss-cross doohickey came off as well! I am left with a little silicon nipple which, while titilating, is not really conducive to the kind of high volume typing I'm used to!
I really don't want to pay 40 bucks to get Apple Support to replace a single key for me - I just need to know how to do it myself. It's only one key and I could probably learn to get used to using the right one, but it would be easier if I could just click it back into place. It's not broken, the mechanism itself seems fine and the key works if I push the little nubbin, so I'm not concerned about that. I just think $40 is too much to pay someone to click a key back into place! I wasn't even doing anything out of the ordinary with it like trying to remove or replace the keys T^T
I'm especially gutted since I just bought a new iPhone from the same Apple shop I bought my laptop like three days ago - if I'd known my laptop was gonna bust I'd have saved myself the money and spent it on repairs instead! Fml, right?
Any help you folks can offer would be very gratefully received - if it comes down to it and I have to fork out the money then I'll do so, but I'd like to explore community options first on the off chance that someone knows how to replace the mechanism and key without having to lug my computer all the way into the city to get it fixed xD
Thanks in advance!
Ehryn

It's pretty easy to do, get something thin like a credit card and run it along the bottom and sides of the keyboard and there are several bracket things that will pop the keyboard up when you pressure them. There will be a couple of cables to clip out behind it so lift it up gently.
You should be able to find a video on youtube anyway!
Try this site for the keyboard http://www.replacementlaptopkeys.com/toshiba_qosmio_laptop_key.html
It shouldn't be too hard to track a replacement down.

Command Key has to be released and pressed each time, holding down command key for multiple commands ignoring all after first keystroke. Have tried this in safe mode - still broken.

This problem has just cropped up - pretty sure it's after the 10.7.3 upgrade.
Scenario: I'm in pages and I'm doing a search. I need to find multiple instances of my search word.
I hold down the command key and press the 'g' key - for find again. It works.
While still holding down the command key - I hit the 'g' key again to do another find again. But instead of executing teh find again, hitting teh 'g' key the sdecond time types "g' over last search item found, acting as if teh command key was not still pessed.
This is happening in DreamWeaver CS5.5, the latest Pages, and the latest BBEdit. Haven't checked all apps.
This IS NOT a problem in the finder though - where command-tabbing brings up the app list properly, and tabs through while holding down teh command key and repeatedly hitting the tab key.
I restarted in safe mode. Still a problem.
First I cleaned the command key, then re-seating the key. I swapped keyboards, Still a problem.
Did a PRAM reset, which didn't fix anything.
I can't find any other post regarding this issue. Been using the mac for over 25 years and I've never seen this one.

This turns out to be a problem with my KVM switcher. The USB port on the switcher for the keyboard is failing - hence the intermittent reaction to the command-key presses.
I connected the keyboard directly to my mac and the problem was resolved - sorry I didn't check that before I posted this.

Left Command Key

Hey Everyone,
I just recently adverted over to the "Mac Experience", and I have to say, I'm really liking it.
I have a MacBook from late 2008 (purchased around a year ago), and just now, the left command key broke. The scissor assembly is broken (very small piece of plastic is chipped), and I wonder how much it'll actually cost to get that little tiny piece of plastic to be fixed.
Do any of you guys have any pointers for me?

Hi tjasko,
There's a few options:
1.) Are you near an Apple Retail Store or Apple Authorized Service Provider? When I worked at an Apple Store (Genius Bar) we use to carry all sorts of spare keyboard assemblies for situations like this (broken scissors, missing/worn keycaps, etc.) We never charged anyone for the swap unless it was half the keyboard and it looked like a tiger mauled it off.
2.) You can buy replacement scissors, yourself. The website iFixit.com sells them, they're bit costly on an individual basis... though.
3.) You can contact AppleCare and arrange a mail service. If you're outside of the one year limited warranty (sounds like you might be) and don't have APP this would be a pretty costly option. If you have APP I see no reason why they wouldn't service the machine for you but considering the hassle of shipping, being without your machine and all that other stuff, the other two options would probably be a better scenario.

I can't order more than one picture at a time in iphoto. I am holding the command key down and highlighting two but only the last one is showing up

Hi,
I need help placing an iphoto order online for prints. I have a few pictures I want in a few sizes and it seems to only allow me to select one at a time. I have held the command key down but it defaults to the last picture i selected. I appreciate your help.

What system and iPhoto versions are you using? As a quick test try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. See if you can get all of the selected photos in the order window as it should be.
If you can't then try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Mid 2011 macbook air. command key has popped off and is now missing the 2nd metal bar. can this be replaced?

The command key popped off my mid 2011 macbook air. It is meant to have two metal bars but can't find the 2nd one. I have clicked it back into place but if I press the button at the bottom the top pops up and I'm worried that if I don't fix the problem I may end up losing the key altogether!
Can you buy replacement metal bars? should I just remove the other bar completely?
Thanks in advance.

Sorry, must have been the crackpipe I smoked last night! LOL
You won't see anything in the Application Support --> Bootcamp folder unless you have previously downloaded the Windows Support Software. Good find.
ADDENDUM STEP:
This step should be placed between 9-10.
Open Bootcamp Assistant. Uncheck everything BUT, "DOWNLOAD THE LATEST WINDOWS SUPPORT SOFTWARE FROM APPLE". You will be prompted to burn the image to a CD/DVD or save to a USB Key. Save the image to a USB key. This will format your USB key properly in preparation for the files. The download commences and if you're lucky, the files will simply be saved to your USB key without having to manually copy them over to the key using the steps above.
IMPORTANT - Even if the support software hangs when its being saved to the USB key, you should now be able to navigate to the directory and see the image. Follow the steps above.
Apologies for missing this.
Best,
WBN

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

Of course. To do it, open a Finder window, go to Finder menu (on the menu bar) > Preferences > General, and untick "Open folders in tabs instead of new windows".

What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

Go to
 > System Preferences > Keyboard
Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

Is there a way to operate the command key using the mouse?

I am working with a student who has limited movement of his hands. He is able to operate a mouse. However, he cannot operate the mouse and make key commands at the same time. Is there any way to adapt the mouse so command key actions can be carried out without pressing the key?

Look inside System Preference "Universal Access" (or whatever even more politically correct name it is called now).
There is a feature called "Sticky keys". That says that when you press the command key in a certain way, it stays pressed (It is "Sticky").
There are also two and three button mouse devices that can be used readily on a Mac (including the "Mighty Mouse" with the little rollerball) that can register one, two, or three button operations.

How could I turn off the Command Key to Windows Key mapping in Remote Desktop for Mac 8

I'd like to be able to turn the Command key->Windows key mapping off. In this new app, whenever I use the Command key to initiate a Mac-side function, it registers a press of the Windows key within the Remote Desktop session. Speaking only
for myself, I use the Command Key for quite a lot of Mac operations, while my need and expectation for a Windows key press is zero.

I'd like to be able to turn the Command key->Windows key mapping off. In this new app, whenever I use the Command key to initiate a Mac-side function, it registers a press of the Windows key within the Remote Desktop session. Speaking
only for myself, I use the Command Key for quite a lot of Mac operations, while my need and expectation for a Windows key press is zero.
Agreed. Cannot stop it by disabling the "Windows" key (from within Windows 7). Every time I Cmd-Tab to change apps, the Start Menu pops up,
and persists, overlaying other app windows. Much more than annoying.
Also, there is no Clipboard Sharing, apparently. Love typing in long binary strings into the Registry.

My command key on my macbook pro retina 2014 is sinking

So I have recently bought a Macbook pro retina 13 inch 2014 model.
I have been using it a lot lately especially for typing and using the command key. I notice that my left command key is sinking or in other words, the left command key is much lower or deeper than other keys if it is not pressed.
Is this normal? I am afraid if I keep using this left command key it will be a problem in the future.
Thanks.

Sorry for bumping this OLD thread. But I am having the same problem. How did you guys exactly resolve it? What did Apple do when u went to the store? (Assuming you did)
Thanks.

Command key shortcuts don't work anymore in Safari since upgrade to Yosemite!

Hi,
I recently upgraded the MacOSX to Yosemite. Since this moment Safari doesn't work properly anymore, because the command key shortcuts are out of order.
Cmd + Q
Cmd + C
Cmd + V
Cmd + X
These are now the key shortcuts I've noticed that aren't working anymore. Other apps (a part from Firefox) don't seem to have these problems.
In the meantime I have to use the mouse cursor and choose from the menu bar.
Apple support wasn't able to help me! They just gave me the advice force quit Safari and restart it while pushing the ALT-key. Result: Nothing!
Thanks in advance for your help.
Kind regard,
Steven
MacBook Air
Version 10.10
1.3 GHz Intel Core i5
8 GB 1600 MHz DDR3

That is rather odd if they are all visible as shortcut commands.
Here are some more tests to do…
1) Disable all your Safari Extensions & retest (in Safari Preferences).
2) Logout of the account (from the Apple menu). At the login window enter your password & hold shift as you click the login button. Keep it held until the Desktop has become usable. This disables 'User login items' - retest. Logout after testing.
3) Try a safe boot… OS X: What is Safe Boot, Safe Mode?
Does it still happen in safe mode? This disables third party extensions & some inessential Apple system extensions - things will not be normal, however the Mac should be 'functional', test as much as you can.
Post the results of those here, it may give us a better idea where to look.

Problems with "v", "]", and command keys on the keyboard

Hi,
On my MacBook, pressing either the "v" key or the command key to the left of the space bar, without pressing the other one as in a keyboard shortcut, pastes what is currently on my clipboard. Pressing only the command key to the right of the space bar, and not the "]" key in combination, moves me forward in my web browser. When I do press the "]" key, nothing happens (I had to copy and paste the "]" and the "v" for this post). Obviously this is somewhat annoying as typing anything with these two symbols becomes a chore. I am still able to use other keyboard shortcuts, however, but in doing so the command key either pastes from the clipboard or, if I'm using a web browser, moves me to the next page in my history before completing the shortcut. How can I fix this? Thanks.

Try resetting your SMC.
Resetting the System Management Controller >>
Try resetting PRAM:
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound (bong) for four times.
6. Release the keys.
If neither help, you could have a hardware issue with the keyboard.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

My command key does not work properly

I changed my left command key on my macbook pro to a different function. When I hit the left command button it responds by darkening the desktop background and then showing smaller versions of all the applications I have open. Similar to mission control but not quite mission control. I have searched around and cannot find a solution. I am running mac os x version 10.7.5 on my macbook pro. I have restored default funtion in the system perferences under mission control and keyboard shortcuts. I have zapped the pram. Is there anyone who has any suggestions to solve this issue? Anyone?

Go to System preferences on the Apple menu, then go to "International" pane in the system preferences pane.
Select Character Palette and Keyboard Viewer. Click "Show on the menu bar".
Now on the menu bar there is a flag, probably an American flag, click on it and select "Show Keyboard Viewer"
As you change the fonts or type you will see the kb acting dynamically.
Check back if it does not solve your problem.
Deivy

Zxc and command key not working on apple keyboard

Hi, I'm having issues with certain areas on my Apple keyboard, specifically the zxc and command keys on my keyboard. I have to keep copying and pasting those letters. No spills, no drops, no known reasons for what may cause damage. Any help appre_iated. Thank you in advan_e.

Does it happen with another KB?
If only this KB then the is either dirty or faulty. Maybe this will help
http://theminiblog.co.uk/archives/2006/11/16/how-to-cleaning-the-apple-keyboard/

Broken Command Key

Similar Messages

Maybe you are looking for