Broken HDD, how to recover my windows 8?

Hi all. I have problem with my Toshiba C875-s7304.
The HDD on it was broken and couldn't be repaired. I bought and installed new HDD. But now i don't have windows 8 , that was on old one and was registered. There was no dvd with windows installer with laptop, all media was on HDD. Is there any way to restore my oficially registered windows 8, because i paid for it? I can't contact the support as i live outside US.

Satellite C875-S7304
Downloads here.
Restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled.
If no recovery discs were created, you can obtain them from Toshiba. Scroll down to Get Recovery Media here. If they won't ship to you, have an acquaintance in the US order it and forward to you.
For instructions, see the section Restoring from recovery media, which begins on p. 57 of the User's Guide.
   Satellite/Satellite Pro C800/L800/S800 Series User’s Guide
Then upgrade to Windows 8.1 following these instructions.
   How to Update from Windows 8 to Windows 8.1
-Jerry

Similar Messages

  • Broken HDD - How to recover my s10-2?

    Hello!!
    I have a problem with my ideapad s10-2. The HDD left this world and along with it the recovery partition.
    I have another hard disc, but I can't find a suitable version of Windows XP that work with my registration key.
    Is there a way to solve this, other than buying a new copy of Windows???

    You sure your old drive is properly dead? sometimes if it's the controller that's gone you can use the drive in a caddy or as a slave in another machine. There are other tricks that have been said to work too, like freezing the drive, tapping it... even if it only works for a short while you could copy the contents.

  • How to recover my windows system

    how to recover my system and other application thats i got bundled with my laptop while purchasing ,i tried to press f11 but nothing happens i mean is there any way to get the process started through a bootable cd or dvd or any helpfull cmd commands that would help me to recover my windows..  i just cant figure it out ,alone doing it will take much time ..any suggestions would be great .....

    Hi,
    There are Three options available to try and reinstall Windows - make sure to back-up any important files first.
    1.  Shut down the notebook.  Tap away at the esc key as soon as you press the power button and see if this launches the Start-up Menu - if it does, try the f11 option here to see if this will start Recovery Manager.
    2.  If you can still boot in to Windows, hold down the Windows Key and press R.  Into the Run Box type compmgmt.msc and hit enter.  Click Disk Management in the left pane and when the partitions have loaded, right click the Recovery Partition and mark it as 'Active'.  Close all open windows and then restart - if this has worked, the notebook will boot from the Recovery Partition upon restart.
    3.  You can order a replacement set of Recovery Discs using the link below.
    Order HP Recovery Discs.
    If you have any problem with this link, order them directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to recover damaged windows that have installed oracle 9i?

    Hi.
    Now I got oracle 9i server on windows XP for develop purpose.
    Few days ago windows XP has damaged, now it couldn't be booted.
    In that oracle 9i server, lots of procedures and packages that were under developing.
    I'm sure that oracle server doesn't have any problem. I want to recovery them.
    Here're what I want to ask.
    1. Re-install windows and oracle. and copy or migrate that can be possible way database data file to recovery procedures and packages. Is it possible?
    2. Can I recovery with those database data file? Unfortunately I didn't export or backup file. T.T
    3. What command should I use when I recovery them.
    4. What files should I move to new oracle location(new data folder)? or Can I assign those data files when I re-install oracle software?
    Thanks in advance
    Dan
    Edited by: allbory on May 30, 2011 6:48 AM

    Are you able to boot the Windows XP computer in safe mode (press the F8 key several times immediately after the computer's post screen disappears after turning the computer on).
    Do you have a second computer with a spare hard drive connector? If so, you could install the drive in that computer (as D;, E;, etc.) and copy the database related files off the drive, if the drive itself is not damaged. If the Oracle files are still in good condition (not corrupt), you could reinstall the exact same Oracle Database version on a new computer, use ORADIM to create a new service (for the database instance) with the same name, shut down the service, copy over the files that were salvaged, and then start up the service. If all of the files are there in the expected locations, including the control files, online redo logs, datafiles, spfile, etc. and all expected directories are present, there is a good chance that the database will open when the ORADIM created service is started.
    Charles Hooper
    Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
    http://hoopercharles.wordpress.com/
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • How to recover windows from 2nd partition

    I have a problem, recovery process crashed almost at the end and when i restart computer i cannot get to the windows (missing files). I installed windows but i didn't have any toshiba utilities for recovery (only those files on 2nd partitions: hdd recovery). And here is my question, how can i recover my system from that files without any toshiba utilities? Can i download them or something? What can i do to restore it, because toshiba recovery media is, i think not available. And if it's not so how can i do? My warranty for laptop expired.
    Solved!
    Go to Solution.

    Satellite A350-110 (PSAL6E-006009G3) 
    how can i recover my system from that files without any toshiba utilities?
     You should order the recovery discs from Toshiba.
       Toshiba Europe Backup Media Online Shop
    After you have restored the hard disk to its original out-of-the-box contents, you should have the recovery utilities and partitions. See the A350 User's Manual (attached) for how to recover after that.
    -Jerry
    Attachments:
    SA350_EN.pdf ‏5918 KB

  • How to recover administrator password in windows 7 using usb

    I have an HP netbook mini and need to how to recover administrator password in windows 7 using usb as we have forgotten and need to load itunes from another Iphone.
    This question was solved.
    View Solution.

    Hi,
    You could use a reset utility such as the free example on the link below - using another PC, this can be created on a usb flash drive.
    http://pogostick.net/~pnh/ntpasswd/
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to recover a Yoga tablet 2 with Windows 8.1

    How to : Recover a Yoga tablet 2 version with Windows 8.1 Bing 
    In case of emergency, if you need this option , or other circumstances ... last hope ..  
    ..works without keyboard ...
    Yoga tab 2 as tablet itself ...equipped with three manual function buttons ,means not so many possible options left ... 
    Front  Yoga Tablet 2 10" version with Windows 8.1
    Shows micro HDMI and headphone out Yoga Tablet 2 10" version with Windows 8.1
    Shows volume rockers and thumb on/off button
    first step keep in mind that your batteryis near fully charged, otherwise plug-in
    save your personal data on a cloud or microsdhc card. ..thats for save...
    Ok...lets go.... push the volume rocker up hold them and press the round button on three seconds.
    the  yoga tab 2 will start up and show the lenovo logo...
     a few seconds later this should be shown ...  
    novo menu
    Normal Startup
    BIOS Setup
    Boot Menu
    System Recovery
    simply touch System Recovery
    that will load the recovery envirement after the break ...
    a few seconds later the yoga screen turns into blue colour
    Choose an option
    Continue  (Exit and continue to Windows 8.1) 
    Use a device (Use a USB drive , network connection or Windows recovery DVD)
    Troubleshoot (Refresh or reset your PC , or use advanced tools) 
    Turn off your PC
    the right way to go is  Troubleshoot ... so give a big five to Troubleshoot... (a soft touch please )
    ...next screen is Troubleshoot...with these options
    Troubleshoot
    Refresh your PC
    If your PC isnt running well, you can refresh it without loosing your files
    Reset your PC
    If you want to remove all of your files you can reset your PC completely
    Advanced options
     touch Reset your PC
    will show this on your Yoga tab 2 .... 
    Here´s what will happen
    * All your personal files and applications will be removed
    * Your PC settings will be restored to their defaults
    touch  Next , after another start or cancel option... the recovery envirement need around an hour to recover ...
    tip toe tip toe ... walking around the block with your pet ... talk with your neighbour ... or something else ..
    Bing, Bong : time is up and your yoga is complete factory restored , so you can startin your yoga tab 2 from a scratch that welcomes you with windows welcome screen, touch it to set up your personal data and so on..
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

    Excellent tip, K!
    Community Advocate Program Manager
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • HT3986 i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?

    i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?

    How did you get them to install the first time and where did you get them?
    Read the Installation Guide, Boot Camp 4.0 FAQ and the Windows 7 FAQ.
    Here's the Boot Camp Manual.

  • [SOLUTION] How to recover a Yoga tablet 2 with Windows 8.1

    Moderator comment: Thread rearranged slightly to allow KalvinKlein's post to be marked as a solution. Regards.

    How to : Recover a Yoga tablet 2 version with Windows 8.1 Bing 
    In case of emergency, if you need this option , or other circumstances ... last hope ..  
    ..works without keyboard ...
    Yoga tab 2 as tablet itself ...equipped with three manual function buttons ,means not so many possible options left ... 
    Front  Yoga Tablet 2 10" version with Windows 8.1
    Shows micro HDMI and headphone out Yoga Tablet 2 10" version with Windows 8.1
    Shows volume rockers and thumb on/off button
    first step keep in mind that your batteryis near fully charged, otherwise plug-in
    save your personal data on a cloud or microsdhc card. ..thats for save...
    Ok...lets go.... push the volume rocker up hold them and press the round button on three seconds.
    the  yoga tab 2 will start up and show the lenovo logo...
     a few seconds later this should be shown ...  
    novo menu
    Normal Startup
    BIOS Setup
    Boot Menu
    System Recovery
    simply touch System Recovery
    that will load the recovery envirement after the break ...
    a few seconds later the yoga screen turns into blue colour
    Choose an option
    Continue  (Exit and continue to Windows 8.1) 
    Use a device (Use a USB drive , network connection or Windows recovery DVD)
    Troubleshoot (Refresh or reset your PC , or use advanced tools) 
    Turn off your PC
    the right way to go is  Troubleshoot ... so give a big five to Troubleshoot... (a soft touch please )
    ...next screen is Troubleshoot...with these options
    Troubleshoot
    Refresh your PC
    If your PC isnt running well, you can refresh it without loosing your files
    Reset your PC
    If you want to remove all of your files you can reset your PC completely
    Advanced options
     touch Reset your PC
    will show this on your Yoga tab 2 .... 
    Here´s what will happen
    * All your personal files and applications will be removed
    * Your PC settings will be restored to their defaults
    touch  Next , after another start or cancel option... the recovery envirement need around an hour to recover ...
    tip toe tip toe ... walking around the block with your pet ... talk with your neighbour ... or something else ..
    Bing, Bong : time is up and your yoga is complete factory restored , so you can startin your yoga tab 2 from a scratch that welcomes you with windows welcome screen, touch it to set up your personal data and so on..
     

  • Hp pavilion dv9500, please how can recover the original window

    hp pavilion dv9500, please how can recover the original window

    Hi,
    There are Three main ways to restore your notebook to its 'Factory Condition' - see the document on the relevant link below.
    Performing An HP System Recovery - Windows 7.
    Performing An HP System Recovery - Windows Vista.
    Performing An HP System Recovery - Windows XP.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to Recover Windows 2008 R2 OS when there is no IMAGE is available ?

    I am using Windows Server 2008 R2 Standard SP1 OS in my Dell PowerEdge 2950 hardware.
    I was doing DCOM settings. I was adding new User group and permission for the newly added user group. After completion of this activity I re-booted my Machine. After re-boot, CTRL + ALT + Delete to unlock this computer appeared on the screen. 
    As soon as I hit Alt +Ctrl+Delete key, a screen turns to BLACK. During this time I checked the VGA Signal availability to Monitor and it is there. HDD activity is also exist (LED indication).
    Then I re-boot the machine and chosen Safe Mode and the case is remain same.
    I don't have my C Drive Image to recover (Acronics).
    I don't understand show do I recover/repair Windows ....
    Someone Pls reply if any solution is exist.
    Regards
    Debashish
    Bangalore.     

    Thanks, for quick reply.
    I had tried "Last known good" but did not work.
    Remote Login did not came to my mind. Other then this option I tried with all the respect but no positive result. Finally I started from the scratch loading OS.
    I was thinking to take an Acronics image before doing DCOM settings. But I was sure that nothing will go wrong as I was just adding new user group. Don't know what has happed to the system.
    Last 2 days it was very bad time for me.
    Anyway thanks a lot for your support.
    Regards, Debashish.

  • How to recover my SSD from simple drive under windows

    hello,
    it starts when i used the bootcamp to partition my 256GB SSD to install windows in my MBA, the target is to have iOS & WIndows7 each in separate partition of course + 3rd partition for my data.
    so everything went all right until i get to Windows manager>driver manager then shrink the windows partition, this done successfully, and the new Unknown partition appears, accidentally i converted it to a simple Drive, this converted all the SSD to simple drive.
    later once MBA reboots, Mac and Recovery partitions are not there, they disappear.
    the question is
    1. either how to roll this activity back?
    2. or, how to recover my MBA to factory defaults?

    How old is your Mac Air? If it is one of the late 2011 models or a 2012 model then you can use Internet Recovery to Re-Partition the drive as ONE Partition. You need to do that to clear out all the problems you now have.
    To use the Internet Recovery system you hold down either Command+r keys or Command+Option+r keys at startup and hold them down until you see a Spinning Globe in the certer of the screen.
    If Command+r doesn't work then you use the Command+Option+r keys. One or the other will get you to the internet Recovery system.
    Right when you used Windows to repartition the Windows partition it screwed up your whole system. You CAN NOT do that, Ever. Once you create a Boot Camp partition to install Windows in you have to Leave it Alone and there is no other way to install Windows on a Mac that also runs OS X.
    There is NO way to FIX your system other then to completely wipe the drive be Re-Partitioning the drive as one partition and starting over with the install of OS X, Programs and personal files.
    Sorry but I thought I made that clear in my first post.
    If your system did not originally come with Lion installed and is older then a 2011 model then you will need to dust off the Original System Discs that came with your system and start with those as systems older then 2011 models can not use Internet Recovery.
    You can only have One Partition for Windows, the one you originally create with the Boot Camp Assistant program.
    You can have multiple partitions made by OS X and one of those could be formatted FAT so both Windows and OS X can use it.
    But with only a 256GB drive you are going to run out of space someplace, on OS X or Windows, and even more so if you again partition the drive to include a third partition.

  • HOW TO RECOVER MY PHOTO ON MY IPHONE BROKEN and locked with a password

    HOW TO RECOVER MY PHOTO ON MY IPHONE BROKEN and locked with a password?

    I JUST SOLVED MY PROBLEM!

  • How to recover HP recovery manager after replacing a new hard drive

    Recently i've got alot of BSOD saying Bad_System_Configuration_Info, and i ran a hp start up test and my hard drive failed the short DST test, so i searched online and it says that it means my hard drive is failing.
    im planning to buy a new hard disk. i dont have a windows disk to recover my windows 7, so i wanted to copy the hp recovery partion from the old drive to the new one. i dont know how to do it, i wonder if anyone knows. i dont have any recovery disks and i dont think i can order one so i want to restore my new hdd without using disks and using my old hdd`s recovery manager from hp
    i bought the computer in US but i moved to china so im assuming that i will buy a new HDD that is not from Hp ? i dont know if this will still work cause i hear that it has to be HDD from hp to work
    This question was solved.
    View Solution.

    Hi,
    Here's an alternative option you can use.
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    An example of a COA Label can be seen Here.
    You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the  same version that originally came with your notebook - ie Windows 7 Home Premium 64bit ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers and software you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to recover Qosmio x500 step-by-step whith Toshibas Productrecovery CDs

    Hi
    I was very plesed to by Toshibas Qosmio x500-10z /Windows 7 x64 PC but it crushed 2times because incompatibilty, some of my earlier Windows Xp external device.
    Recover whith my own recovery disks 2 DVD made on the 1 day, dosnt works. Had dubble of partitition C/D/E.Recover again,many of my old programs inkompatibilite dont works as use to be.
    Now I bought Toshibas Own Produktrecovery Disks (5 peaces)
    How to recover step by step (formating to clean upp my HDD) and reinstall the PC to factory condition, whith capability to systemrecovery afterwards?
    Thanks for all help.Im rooky.
    Geza Wolf Sweden

    Hello
    Recovery installation is very simply.
    # Switch your notebook ON and press F12 several times
    # When the boot menu is shown put installations disc 1 in optical disc drive
    # In boot menu choose CD/DVD and press ENTER
    # When the Toshiba Recovery Window is shown just click on next
    # On next step Summary should be shown > confirm with next
    Recovery installation should start. Just follow menu on the screen and put next installation disc when necessary. Please try this and I hope everything will be OK.

Maybe you are looking for