Broken ipod after updating!

I updated my daughter's ipod and now it keeps flashing on and off with apple logo. What does this mean? Did I brake it?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Similar Messages

  • Itunes not recognizing 7th gen iPod after updating to windows 8.1 and latest itunes, works on other computers

    So I updated my computer to 8.1 I don't know if I synced my ipod after that, but I know immediately after updating iTunes, I began to receive an error message saying iTunes recognizes that I connected an iPod, but can't identify properly.
    I've tried uninstalling and reinstalling as well as restarting the computer, trying different USB ports. it works when I connect it to other computers.

    Hi HIJKay,
    Thanks for using Apple Support Communities.  This article has some steps you can take if iTunes isn't correctly recognizing your iPod:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Cheers,
    - Ari

  • [Solved] Severely broken system after update

    I need help with system that doesn't boot after update.
    I tried to make pacman -Syu on a system which was not updated since 2010 xmass... probably being overwhelmed by number of issues I did something wrong, but now the system is in a very bad state.
    I think that the main issue was glibc update. I followed the instruction to install all other packages before glibc, but every second package was complaining about glibc (although they all updated). Then pacman became broken, but I solved this and finally everything got updated.
    Everything looked fine right after update, but now the system is "unable to find root device" on boot.
    I tried to boot with recent arch usb stick (cd drive is broken in the computer), but it doesn't boot (reboots right after "loading archiso.img"). I managed to boot with ubuntu usb stick. I chrooted to my arch partition using these instructions:
    https://wiki.archlinux.org/index.php/Chroot#Change_root
    then, following pacman wiki I reinstalled linux, mkinitcpio and systemd.
    It didn't help. The last thing I can think of is to reinstall all packages via chroot. Is there any handy way to do this, taking into account that some packages could have been installed from AUR (I don't care about them at this point, but I wouldn't like this to stop me from reinstalling all other packages)?
    Any other ideas?
    Last edited by senjin (2012-09-15 19:34:26)

    It's not a solution since arch installation usb stick doesn't work for me, as I mentioned above. I must either make this installation work, or move to ubuntu (gah!)
    edit:
    I managed to boot. After the error message at the beginning I'm left with "you can type exit to continue booting, but it will most likely fail"... it doesn't fail, and system appears to be working normally (well, except some error about consolekit when X is starting, probably unrelated).
    Now the question is how to avoid this error message at the beginning...
    Last edited by senjin (2012-09-15 13:04:04)

  • Podcasts fail to show on iPod after updating to iTunes 10.1.0.56

    Hi,
    I'm using a 5th gen iPod classic. When I updated iTunes to version 10.1.0.56, all the podcasts I downloaded from iTunes after the update failed to show up on my iPod after synching. I've downloaded podcasts before and had them show up on my iPod. Is there a different procedure I don't know about?
    Thanks for any help.

    Hello msapostol,
    And welcome to Apple Discussions!
    You may want to double check your iPod's Sync settings for podcasts from under your iPod's Podcasts tab in iTunes while it is connected.
    Updates to iTunes or your iPod has known to reconfigure certain settings.
    B-rock

  • Itunes does not recognise the ipod after update to itunes 8.2.0.23

    Hi, Now find, after putting new songs in my play list, that when I plug in ipod to update songs on ipod itunes does not recognise the ipod.
    The version of iTunes I updated to was 8.2.0.23 - everything worked fine until then. I see there is a newer version 8.2.1 now available - do you think by installing this the "unable to recognise" problem would be fixed???
    Thanks for your thoughts!

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • PC won't recognise ipod after updating iTunes

    I have just updated iTunes to the latest version for Windows, and spent some time getting it to work again - I had to reinstall Quicktime (version 7) before iTunes would open. The new version would not recognise my iPod, so I downloaded the latest iPod updater 2005 11 17 and ran that.
    The dialogue box asks me to "plug in the iPod to update it", but when I do it just sits there. The iPod remains in "do not disconnect" mode, nothing happens for a while and then the entire system crashes to a blue screen that explains that Windows has shut down...
    The iPod is about 2 years old and one of the 40GB models with a plain wheel and the four buttons across the top.
    Can any kind person give me a pointer what to do next?
    Thanks
    Nick
    Evesham Laptop   Windows XP  

    Could it be due to the recent iTunes update as I've just updated it and since then my iPod hasn't been working? :S

  • No longer safe to remove iPod after updating (synching)

    I'm using iTunes 7 on XP Pro. AMD Athlon 64. 4G 60-gig iPod (color).
    "Enable Disk Use" is NOT checked, but my iPod now shows up as a Removable Disk in XP. And after synching, iTunes says "iPod update is complete" but no longer tells me it's safe to remove my iPod.
    Yes, I can manually eject the iPod, but that's a bit of a pain. I'd rather just grab it and go. Any ideas?
    (Please don't tell me, here in the WINDOWS forum, that buying a Mac will solve all my problems. Another answer like that will send me into the nearest clock tower.)

    Well, I believe you should keep it because you may need it later.
    Try to delete other files on your computer, or backup some of the data to CD-R, DVDR or external hard drive and then remove them.

  • Cannot sync iPod after updating to 10.4.1 for windows. Help?

    I recently updated to iTunes 10.4.1 for Windows 7 on my PC and now I can no longer sync my iPod. Once it starts syncing music, I get an error message that says "iTunes Has Stopped Working" and it does not give me any kind of resolution to the problem. I have uninstalled / reinstalled iTunes and all other Apple software from my computer but I'm still running into the same issues after I've reinstalled everything. Does anyone know why this might be happening and how I can resolve the issue? I've researched the issue and it seems like a lot of people are running into this and I haven't found any kind of universal fix yet.
    Thanks

    Upgraded to iTunes 10.5 and it syncs fine now so if anyone else is having the problem, that's the only solution I've found out there.
    PS - Posting on these forums appears to be pretty useless!

  • Why can't I sync my ipod after update

    After doing the latest update, my ipod, iPad and iPhone is no longer recognised in iTunes. None of the devices I have are connecting or showing in connected devices box, it is all greyed out. I have run the device test on iTunes but it says there is an error and it cannot find any connected devices. Please help, this update has driven me crazy as my iTunes and my devices always connected with no problems.

    What did the error message say?
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates

  • Frozen 5G iPod after updating

    After purchasing an album from iTunes, I was advised to update to iTunes 7.0, and subsequently to a newer iPod software. On completion, my iPod 'froze'. Every time I reset it, it behaves normally for approximately 20 seconds then freezes again. I've restored the original settings, have drained the battery and completely recharged, but nothing else seems to work. Appreciate any advice!!!

    Sure -- here you go:
    iTunes 6: http://www.filehippo.com/download_itunes/?1249
    Firmware 1.1.2: http://www.apple.com/support/downloads/ipodupdater20060628forwindows.html
    The only way to get back to the old firmware is by first downgrading to iTunes 6.

  • Album pictures gone on my ipod after update

    my albums pictures are gone after I updated to the newer software for my ipod. I used to see a picture of an album when I listened to a song. does anybody know how to fix this problem?

    This is still lady of the woods.
    I finally uninstalled iTunes 7 & then installed iTunes 6 again. Now I can transfer music, but I get no Video.
    Any suggestions?

  • ITunes won't recognize iPod after update

    I got a 40G color photo ipod froma friend and had it restored, plugged it in, added my music, unplugged it, and used it just fine. I went to plug it back in to add a few more things and it was not recognized by iTunes. The autoplay window came up and then the iPod installer said I had to restore the iPod- which I did. Then I reinstalled my music, unplugged it, and it worked fine. Then I plugged it back in and the same thing happened. I went to the apple store and they restored it again and ran diagnostics on it. It seems to be just fine. I got it home. plugged it back in to my laptop, added my music, and it worked fine. Then I unplugged it and it messed up again.
    You can see the frustrating cycle that I find myself in. Here are the things that I have noticed:
    When I stop the update partway through, disconnect and then reconnect, it seems to be fine. Once the update is finished and the iPod is disconnected and reconnected, it seems to never work properly.
    Also, it seems that when it is working properly, when I open the safely remove hardware window, the iPod is recognized as an iPod. It reads:
    USB mass storage device
    Apple iPod USB device
    When it is not being recognized, I open the safely remove hardware window, and it says:
    USB mass storage device
    Generic volume - (E:)
    Apple iPod USB device
    Could this be the problem?
    iPod 40G color photo   Windows XP Pro  

    B- I plugged in my iPod again this morning and got the same autoplay window- and no recognition. I went in to change the drive letter of the iPod following the instructions on the link you gave me. When I pull up the disk management window, I see 2 disks listed: (C:) and (E:), but it does not say IPOD like the picture does on the help page. Should I change the drive letter anyway? Does this mean that it's not recognized as an iPod? Thanks for your help...
    Also, about 3-5 minutes after the autoplay window comes up, I get an "iPod not readable" message that instructs me to open the iPod updater to restore my iPod- which I've done 5 times already.

  • Cannot eject Ipod after updating to 5.0

    I've never had trouble with ejecting until just updating to 5.0. I get the message, "the Ipod 'ipod' cannot be ejected because it contains files that are in use by another application." Now the new music on my desktop won't go to the Ipod. Any suggestions would be greatly appreciated.

    My problems on an iMac G5 running Tiger started 9/21 when I upgraded to iTunes 5.0.1. (Prior to that there were problems mounting the iPod if I waited too long after turning on the computer, iTunes 5.0).
    On 9/21 iPod mounted but would not sync nor eject. Strangely, on 9/22 iPod synchronized and ejected; but on 9/26 it would not sync even though iTunes said it had. And then it would not eject, giving error messages to the effect that the iPod or its files were in use by antoher application.
    9/27 I plugged the iPod into a Powerbook running Panther... no mounting problems... no ejection problems.
    The iPod is third generation with version 2.3 software... connected by firewire.
    I need help also... I am concluding that the problem lies in either the computer, Tiger or iTunes. But how to fix?

  • Synching an Ipod after updating

    I was prompted to update Itunes, and downloaded the suggested files. It was running just fine, but once I hooked the Ipod up to my computer, it wasn't acknowledging/updating the Ipod at all.
    I've never had trouble before, although I have seen similar recognition problems when a foreign Ipod is plugged into a PC with a foreign Itunes library.
    I've tried 5-6 times now, and after approximately 20 minutes of attempting to 'synch,' itunes sort of shrugs me off with a definitive 'whelp, we give up.'
    Anyone? Thanks.

    Hi srda310,
    So resuming, you want to transfer your iTunes library located on your iPod to the new computer, isn't it? If so, read this:
    If you have purchased songs from the iTunes Music Store, then those are pretty easy to transfer to your computer. You'll just need to follow [this instructions|http://docs.info.apple.com/article.html?artnum=305465].
    All your other songs (for example, those ripped from your CD's), you'll need to use any 3rd party program to transfer them to your iTunes library!
    Some can also transfer your playlists, videos, ratings, podcast...
    *To use with iPod Touch/iPhone and other iPods:*
    [iGadget|http://www.ipodsoft.com/site/pmwiki.php?n=igadget.Homepage] (Mac and Windows)
    [iRepo|http://www.purpleghost.com/index.php?q=irepo] (Mac and Windows)
    [iPod Access|http://www.findleydesigns.com/ipodaccess/index.html] (Mac and Windows)
    *To use only with other iPods:*
    [Media Widget|http://www.bootstrapdevelopment.com/showproduct.aspx?t=b#features] (Windows only)
    [iDump|http://www.download.com/iDump/3000-2169_4-10407429.html] (Windows only)
    [Senuti|http://www.fadingred.org/senuti> (Mac Only)
    I would recommend you to keep your media safe, backing up library. Click [here|http://docs.info.apple.com/article.html?artnum=302392] to learn how to do it, using CD's or DVD's.
    Hope this helps! If you still have doubts, please reply.
    Best Regards,
    !http://signatures.mylivesignature.com/54486/122/A57996D55BE7ABB4A67DE686D381A27 4.png!

  • Broken Xorg after update

    After I did system update (pacman -Suy on Sunday 22th from ftp://lysator.liu.se - official repository) the Xorg didn't started I just got the screen:
    /etc/profile: line1: n#: command not found
    /etc/profile: line1: thennfor: command not found
    /etc/profile: line1: dontest: command not found
    /etc/profile: line1: thenn: command not found
    some gdm-binary[1181]:WARNING: GdmDisplay: display lasted xxx seconds I had before update
    gdm-binary[1181]: WARNING: GdmLocalDisplayFactory:maximum number of X display failures reached: check X sever log for errors
    Before update I deleted the "/etc/profile.d/locale.sh" due to manual at archlinux.org.
    My Xorg.0.log is:
    [ 5616.505]
    X.Org X Server 1.11.1
    Release Date: 2011-09-24
    [ 5616.511] X Protocol Version 11, Revision 0
    [ 5616.513] Build Operating System: Linux 3.0-ARCH x86_64
    [ 5616.514] Current Operating System: Linux esprimo 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011 x86_64
    [ 5616.517] Kernel command line: root=/dev/disk/by-uuid/5d093582-b21d-4a60-9376-258480024369 ro vga=864
    [ 5616.519] Build Date: 10 October 2011 08:55:30AM
    [ 5616.521]
    [ 5616.523] Current version of pixman: 0.22.2
    [ 5616.525] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 5616.529] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 5616.536] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 23 21:59:19 2011
    [ 5616.538] (==) Using config file: "/etc/X11/xorg.conf"
    [ 5616.540] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 5616.543] (==) ServerLayout "X.org Configured"
    [ 5616.543] (**) |-->Screen "Screen0" (0)
    [ 5616.543] (**) | |-->Monitor "Monitor0"
    [ 5616.543] (**) | |-->Device "Card0"
    [ 5616.543] (**) |-->Input Device "Mouse0"
    [ 5616.543] (**) |-->Input Device "Keyboard0"
    [ 5616.543] (**) |-->Input Device "SynapticsTouchpad"
    [ 5616.543] (==) Automatically adding devices
    [ 5616.543] (==) Automatically enabling devices
    [ 5616.543] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 5616.543] Entry deleted from font path.
    [ 5616.543] (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 5616.543] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 5616.543] (**) Extension "Composite" is enabled
    [ 5616.543] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 5616.543] (WW) Disabling Mouse0
    [ 5616.543] (WW) Disabling Keyboard0
    [ 5616.543] (II) Loader magic: 0x7ccae0
    [ 5616.543] (II) Module ABI versions:
    [ 5616.543] X.Org ANSI C Emulation: 0.4
    [ 5616.543] X.Org Video Driver: 11.0
    [ 5616.543] X.Org XInput driver : 13.0
    [ 5616.543] X.Org Server Extension : 6.0
    [ 5616.544] (--) PCI:*(0:0:2:0) 8086:2a02:1734:110e rev 3, Mem @ 0xfc000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
    [ 5616.544] (--) PCI: (0:0:2:1) 8086:2a03:1734:110e rev 3, Mem @ 0xfc100000/1048576
    [ 5616.545] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 5616.545] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 5616.545] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 5616.545] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 5616.545] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [ 5616.545] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [ 5616.545] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    [ 5616.545] (II) LoadModule: "dri2"
    [ 5616.545] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 5616.545] (II) Module dri2: vendor="X.Org Foundation"
    [ 5616.545] compiled for 1.11.1, module version = 1.2.0
    [ 5616.545] ABI class: X.Org Server Extension, version 6.0
    [ 5616.545] (II) Loading extension DRI2
    [ 5616.545] (II) LoadModule: "dri"
    [ 5616.545] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 5616.545] (II) Module dri: vendor="X.Org Foundation"
    [ 5616.545] compiled for 1.11.1, module version = 1.0.0
    [ 5616.545] ABI class: X.Org Server Extension, version 6.0
    [ 5616.545] (II) Loading extension XFree86-DRI
    [ 5616.545] (II) LoadModule: "dbe"
    [ 5616.546] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 5616.546] (II) Module dbe: vendor="X.Org Foundation"
    [ 5616.546] compiled for 1.11.1, module version = 1.0.0
    [ 5616.546] Module class: X.Org Server Extension
    [ 5616.546] ABI class: X.Org Server Extension, version 6.0
    [ 5616.546] (II) Loading extension DOUBLE-BUFFER
    [ 5616.546] (II) LoadModule: "extmod"
    [ 5616.546] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 5616.546] (II) Module extmod: vendor="X.Org Foundation"
    [ 5616.546] compiled for 1.11.1, module version = 1.0.0
    [ 5616.546] Module class: X.Org Server Extension
    [ 5616.546] ABI class: X.Org Server Extension, version 6.0
    [ 5616.546] (II) Loading extension MIT-SCREEN-SAVER
    [ 5616.546] (II) Loading extension XFree86-VidModeExtension
    [ 5616.546] (II) Loading extension XFree86-DGA
    [ 5616.546] (II) Loading extension DPMS
    [ 5616.546] (II) Loading extension XVideo
    [ 5616.546] (II) Loading extension XVideo-MotionCompensation
    [ 5616.546] (II) Loading extension X-Resource
    [ 5616.546] (II) LoadModule: "record"
    [ 5616.546] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 5616.546] (II) Module record: vendor="X.Org Foundation"
    [ 5616.546] compiled for 1.11.1, module version = 1.13.0
    [ 5616.546] Module class: X.Org Server Extension
    [ 5616.546] ABI class: X.Org Server Extension, version 6.0
    [ 5616.546] (II) Loading extension RECORD
    [ 5616.546] (II) LoadModule: "glx"
    [ 5616.546] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 5616.547] (II) Module glx: vendor="X.Org Foundation"
    [ 5616.547] compiled for 1.11.1, module version = 1.0.0
    [ 5616.547] ABI class: X.Org Server Extension, version 6.0
    [ 5616.547] (==) AIGLX enabled
    [ 5616.547] (II) Loading extension GLX
    [ 5616.547] (II) LoadModule: "synaptics"
    [ 5616.547] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 5616.547] (II) Module synaptics: vendor="X.Org Foundation"
    [ 5616.547] compiled for 1.11.0, module version = 1.5.0
    [ 5616.547] Module class: X.Org XInput Driver
    [ 5616.547] ABI class: X.Org XInput driver, version 13.0
    [ 5616.547] (II) LoadModule: "intel"
    [ 5616.547] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 5616.547] (II) Module intel: vendor="X.Org Foundation"
    [ 5616.547] compiled for 1.10.99.902, module version = 2.16.0
    [ 5616.547] Module class: X.Org Video Driver
    [ 5616.547] ABI class: X.Org Video Driver, version 11.0
    [ 5616.547] (II) LoadModule: "synaptics"
    [ 5616.547] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 5616.547] (II) Module synaptics: vendor="X.Org Foundation"
    [ 5616.547] compiled for 1.11.0, module version = 1.5.0
    [ 5616.547] Module class: X.Org XInput Driver
    [ 5616.547] ABI class: X.Org XInput driver, version 13.0
    [ 5616.547] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    [ 5616.548] (--) using VT number 7
    [ 5616.559] (EE) No devices detected.
    [ 5616.559]
    Fatal server error:
    [ 5616.559] no screens found
    [ 5616.559]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 5616.559] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 5616.559]
    I tried to generate and use new xorg.conf with "Xorg configure" but it didn't help. I tried the copy back the deleted locale.sh file, but it didn;t help either. When I deleted the corg.conf, the starting process was successfull in way I got to gdm login window, but I was unable to login due to infunction keyboard and mouse also. Did somebody also have or had the problem like this? Can somebody help?
    Thanks

    For better investigation I add also "messages.log". I do not have the command "xorgcfg" available on my system. As I understood from "x.org.wiki" the xorgcfg command is just the graphic configuration tool with same function as Xorg -configure.
    Oct 25 22:25:57 esprimo shutdown[3995]: shutting down for system reboot
    Oct 25 22:25:57 esprimo init: Switching to runlevel: 6
    Oct 25 22:25:58 esprimo modprobe: FATAL: Could not read '/lib/modules/3.0-ARCH/kernel/net/bluetooth/bluetooth.ko': No such file or directory
    Oct 25 22:25:58 esprimo laptop-mode: Laptop mode
    Oct 25 22:25:58 esprimo laptop-mode: disabled, not active
    Oct 25 22:25:59 esprimo kernel: [ 190.198058] EXT4-fs (sda4): re-mounted. Opts: commit=0
    Oct 25 22:25:59 esprimo acpid: exiting
    Oct 25 22:25:59 esprimo NetworkManager[701]: <info> caught signal 15, shutting down normally.
    Oct 25 22:25:59 esprimo NetworkManager[701]: <warn> quit request received, terminating...
    Oct 25 22:25:59 esprimo NetworkManager[701]: <info> exiting (success)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Initializing cgroup subsys cpu
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/5d093582-b21d-4a60-9376-258480024369 ro vga=864
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-provided physical RAM map:
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 00000000bf6d0000 - 00000000bf6df000 (ACPI NVS)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 00000000bf6df000 - 00000000c0000000 (reserved)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] NX (Execute Disable) protection: active
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] DMI present.
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] No AGP bridge found
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] last_pfn = 0xbf6d0 max_arch_pfn = 0x400000000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] found SMP MP-table at [ffff8800000f7ab0] f7ab0
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6d0000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] RAMDISK: 37dd2000 - 37ff0000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: RSDP 00000000000f78b0 00024 (v02 PTLTD )
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: XSDT 00000000bf6d28ce 00094 (v01 FSC PC 06040000 LTP 00000000)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: FACP 00000000bf6dbbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: DSDT 00000000bf6d3e38 07D26 (v02 WS C46_____ 06040000 MSFT 03000000)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: FACS 00000000bf6defc0 00040
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: APIC 00000000bf6dbcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: HPET 00000000bf6dbd2e 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: MCFG 00000000bf6dbd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: TCPA 00000000bf6dbda2 00032 (v01 Intel CRESTLN 06040000 00005A52)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: TMOR 00000000bf6dbdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: SLIC 00000000bf6dbdfa 00176 (v01 FSC PC 06040000 PTL 00000001)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: APIC 00000000bf6dbf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: BOOT 00000000bf6dbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: SSDT 00000000bf6d3b5b 002DD (v01 SataRe SataAhci 00001000 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: SSDT 00000000bf6d39be 0019D (v01 BrtRef DD01BRT 00001000 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: SSDT 00000000bf6d2eee 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: SSDT 00000000bf6d2e48 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: SSDT 00000000bf6d2962 004E6 (v01 PmRef CpuPm 00003000 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: DMI detected: Fujitsu Siemens
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] No NUMA configuration found
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Zone PFN ranges:
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Movable zone start PFN for each node
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] early_node_map[3] active PFN ranges
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] 0: 0x00000100 -> 0x000bf6d0
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000bf6d0000 - 00000000bf6df000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000bf6df000 - 00000000c0000000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s78464 r8192 d23936 u1048576
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028186
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Policy zone: Normal
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/5d093582-b21d-4a60-9376-258480024369 ro vga=864
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Checking aperture...
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] No AGP bridge found
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Memory: 4048952k/5242880k available (4066k kernel code, 1058436k absent, 135492k reserved, 3302k data, 712k init)
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Verbose stalled-CPUs detection is disabled.
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] NR_IRQS:2304
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Extended CMOS year: 2000
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Console: colour dummy device 80x25
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] console [tty0] enabled
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] allocated 33554432 bytes of page_cgroup
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Fast TSC calibration using PIT
    Oct 25 23:11:51 esprimo kernel: [ 0.000000] Detected 1995.108 MHz processor.
    Oct 25 23:11:51 esprimo kernel: [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.47 BogoMIPS (lpj=6650360)
    Oct 25 23:11:51 esprimo kernel: [ 0.003343] pid_max: default: 32768 minimum: 301
    Oct 25 23:11:51 esprimo kernel: [ 0.003460] Security Framework initialized
    Oct 25 23:11:51 esprimo kernel: [ 0.003467] AppArmor: AppArmor disabled by boot time parameter
    Oct 25 23:11:51 esprimo kernel: [ 0.003888] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Oct 25 23:11:51 esprimo kernel: [ 0.006762] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Oct 25 23:11:51 esprimo kernel: [ 0.007915] Mount-cache hash table entries: 256
    Oct 25 23:11:51 esprimo kernel: [ 0.008371] Initializing cgroup subsys cpuacct
    Oct 25 23:11:51 esprimo kernel: [ 0.008407] Initializing cgroup subsys memory
    Oct 25 23:11:51 esprimo kernel: [ 0.008427] Initializing cgroup subsys devices
    Oct 25 23:11:51 esprimo kernel: [ 0.008429] Initializing cgroup subsys freezer
    Oct 25 23:11:51 esprimo kernel: [ 0.008431] Initializing cgroup subsys net_cls
    Oct 25 23:11:51 esprimo kernel: [ 0.008433] Initializing cgroup subsys blkio
    Oct 25 23:11:51 esprimo kernel: [ 0.008493] CPU: Physical Processor ID: 0
    Oct 25 23:11:51 esprimo kernel: [ 0.008494] CPU: Processor Core ID: 0
    Oct 25 23:11:51 esprimo kernel: [ 0.008497] mce: CPU supports 6 MCE banks
    Oct 25 23:11:51 esprimo kernel: [ 0.008511] using mwait in idle threads.
    Oct 25 23:11:51 esprimo kernel: [ 0.009669] ACPI: Core revision 20110413
    Oct 25 23:11:51 esprimo kernel: [ 0.016681] ftrace: allocating 16144 entries in 64 pages
    Oct 25 23:11:51 esprimo kernel: [ 0.020399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Oct 25 23:11:51 esprimo kernel: [ 0.054610] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
    Oct 25 23:11:51 esprimo kernel: [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    Oct 25 23:11:51 esprimo kernel: [ 0.056663] PEBS disabled due to CPU errata.
    Oct 25 23:11:51 esprimo kernel: [ 0.056663] ... version: 2
    Oct 25 23:11:51 esprimo kernel: [ 0.056663] ... bit width: 40
    Oct 25 23:11:51 esprimo kernel: [ 0.056663] ... generic registers: 2
    Oct 25 23:11:51 esprimo kernel: [ 0.056663] ... value mask: 000000ffffffffff
    Oct 25 23:11:51 esprimo kernel: [ 0.056663] ... max period: 000000007fffffff
    Oct 25 23:11:51 esprimo kernel: [ 0.056663] ... fixed-purpose events: 3
    Oct 25 23:11:51 esprimo kernel: [ 0.056663] ... event mask: 0000000700000003
    Oct 25 23:11:51 esprimo kernel: [ 0.073444] NMI watchdog enabled, takes one hw-pmu counter.
    Oct 25 23:11:51 esprimo kernel: [ 0.100007] Booting Node 0, Processors #1 Ok.
    Oct 25 23:11:51 esprimo kernel: [ 0.196683] NMI watchdog enabled, takes one hw-pmu counter.
    Oct 25 23:11:51 esprimo kernel: [ 0.203325] Brought up 2 CPUs
    Oct 25 23:11:51 esprimo kernel: [ 0.203328] Total of 2 processors activated (7983.70 BogoMIPS).
    Oct 25 23:11:51 esprimo kernel: [ 0.204848] devtmpfs: initialized
    Oct 25 23:11:51 esprimo kernel: [ 0.204848] PM: Registering ACPI NVS region at bf6d0000 (61440 bytes)
    Oct 25 23:11:51 esprimo kernel: [ 0.207202] print_constraints: dummy:
    Oct 25 23:11:51 esprimo kernel: [ 0.207292] NET: Registered protocol family 16
    Oct 25 23:11:51 esprimo kernel: [ 0.207417] ACPI: bus type pci registered
    Oct 25 23:11:51 esprimo kernel: [ 0.207589] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Oct 25 23:11:51 esprimo kernel: [ 0.207592] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    Oct 25 23:11:51 esprimo kernel: [ 0.257765] PCI: Using configuration type 1 for base access
    Oct 25 23:11:51 esprimo kernel: [ 0.258260] bio: create slab <bio-0> at 0
    Oct 25 23:11:51 esprimo kernel: [ 0.258260] ACPI: Deleted _OSI(Windows 2006)
    Oct 25 23:11:51 esprimo kernel: [ 0.258260] ACPI: Deleted _OSI(Windows 2006 SP1)
    Oct 25 23:11:51 esprimo kernel: [ 0.258260] ACPI: Deleted _OSI(Windows 2006 SP2)
    Oct 25 23:11:51 esprimo kernel: [ 0.262599] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Oct 25 23:11:51 esprimo kernel: [ 0.263333] ACPI: SSDT 00000000bf6d367c 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.263671] ACPI: Dynamic OEM Table Load:
    Oct 25 23:11:51 esprimo kernel: [ 0.263674] ACPI: SSDT (null) 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.263783] ACPI: SSDT 00000000bf6d314d 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.264104] ACPI: Dynamic OEM Table Load:
    Oct 25 23:11:51 esprimo kernel: [ 0.264107] ACPI: SSDT (null) 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.264312] ACPI: SSDT 00000000bf6d38f6 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.264644] ACPI: Dynamic OEM Table Load:
    Oct 25 23:11:51 esprimo kernel: [ 0.264648] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.264732] ACPI: SSDT 00000000bf6d35f7 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.265057] ACPI: Dynamic OEM Table Load:
    Oct 25 23:11:51 esprimo kernel: [ 0.265060] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060912)
    Oct 25 23:11:51 esprimo kernel: [ 0.270072] ACPI: Interpreter enabled
    Oct 25 23:11:51 esprimo kernel: [ 0.270075] ACPI: (supports S0 S3 S4 S5)
    Oct 25 23:11:51 esprimo kernel: [ 0.270095] ACPI: Using IOAPIC for interrupt routing
    Oct 25 23:11:51 esprimo kernel: [ 0.284153] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    Oct 25 23:11:51 esprimo kernel: [ 0.284321] ACPI: No dock devices found.
    Oct 25 23:11:51 esprimo kernel: [ 0.284323] HEST: Table not found.
    Oct 25 23:11:51 esprimo kernel: [ 0.284326] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    Oct 25 23:11:51 esprimo kernel: [ 0.284631] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
    Oct 25 23:11:51 esprimo kernel: [ 0.284638] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801392412f8), AE_NOT_FOUND (20110413/psparse-536)
    Oct 25 23:11:51 esprimo kernel: [ 0.284650] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Oct 25 23:11:51 esprimo kernel: [ 0.288514] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    Oct 25 23:11:51 esprimo kernel: [ 0.288521] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    Oct 25 23:11:51 esprimo kernel: [ 0.288528] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0068 (mask 0007)
    Oct 25 23:11:51 esprimo kernel: [ 0.289290] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    Oct 25 23:11:51 esprimo kernel: [ 0.289305] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    Oct 25 23:11:51 esprimo kernel: [ 0.289391] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
    Oct 25 23:11:51 esprimo kernel: [ 0.293339] pci 0000:00:1c.2: PCI bridge to [bus 08-09]
    Oct 25 23:11:51 esprimo kernel: [ 0.293424] pci 0000:00:1c.3: PCI bridge to [bus 0a-0b]
    Oct 25 23:11:51 esprimo kernel: [ 0.293532] pci 0000:00:1e.0: PCI bridge to [bus 10-10] (subtractive decode)
    Oct 25 23:11:51 esprimo kernel: [ 0.293990] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
    Oct 25 23:11:51 esprimo kernel: [ 0.293996] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801392412f8), AE_NOT_FOUND (20110413/psparse-536)
    Oct 25 23:11:51 esprimo kernel: [ 0.294007] pci0000:00: Requesting ACPI _OSC control (0x1d)
    Oct 25 23:11:51 esprimo kernel: [ 0.294025] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
    Oct 25 23:11:51 esprimo kernel: [ 0.294031] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801392412f8), AE_NOT_FOUND (20110413/psparse-536)
    Oct 25 23:11:51 esprimo kernel: [ 0.294041] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    Oct 25 23:11:51 esprimo kernel: [ 0.294043] ACPI _OSC control for PCIe not granted, disabling ASPM
    Oct 25 23:11:51 esprimo kernel: [ 0.304586] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Oct 25 23:11:51 esprimo kernel: [ 0.304636] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Oct 25 23:11:51 esprimo kernel: [ 0.304687] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Oct 25 23:11:51 esprimo kernel: [ 0.304735] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Oct 25 23:11:51 esprimo kernel: [ 0.304782] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    Oct 25 23:11:51 esprimo kernel: [ 0.304830] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Oct 25 23:11:51 esprimo kernel: [ 0.304877] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Oct 25 23:11:51 esprimo kernel: [ 0.304924] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Oct 25 23:11:51 esprimo kernel: [ 0.305022] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    Oct 25 23:11:51 esprimo kernel: [ 0.305036] vgaarb: loaded
    Oct 25 23:11:51 esprimo kernel: [ 0.305038] vgaarb: bridge control possible 0000:00:02.0
    Oct 25 23:11:51 esprimo kernel: [ 0.305138] PCI: Using ACPI for IRQ routing
    Oct 25 23:11:51 esprimo kernel: [ 0.317109] NetLabel: Initializing
    Oct 25 23:11:51 esprimo kernel: [ 0.317112] NetLabel: domain hash size = 128
    Oct 25 23:11:51 esprimo kernel: [ 0.317113] NetLabel: protocols = UNLABELED CIPSOv4
    Oct 25 23:11:51 esprimo kernel: [ 0.317129] NetLabel: unlabeled traffic allowed by default
    Oct 25 23:11:51 esprimo kernel: [ 0.317143] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Oct 25 23:11:51 esprimo kernel: [ 0.317148] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Oct 25 23:11:51 esprimo kernel: [ 0.317153] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Oct 25 23:11:51 esprimo kernel: [ 0.326665] Switching to clocksource hpet
    Oct 25 23:11:51 esprimo kernel: [ 0.329899] Switched to NOHz mode on CPU #0
    Oct 25 23:11:51 esprimo kernel: [ 0.329951] Switched to NOHz mode on CPU #1
    Oct 25 23:11:51 esprimo kernel: [ 0.333983] pnp: PnP ACPI init
    Oct 25 23:11:51 esprimo kernel: [ 0.334002] ACPI: bus type pnp registered
    Oct 25 23:11:51 esprimo kernel: [ 0.334614] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.334617] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.334621] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.334624] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.334627] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.334630] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.334633] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.335318] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.335508] system 00:06: [io 0x0800-0x080f] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.335511] system 00:06: [io 0x1000-0x107f] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.335514] system 00:06: [io 0x1180-0x11bf] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.335517] system 00:06: [io 0xfe00] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.335520] system 00:06: [mem 0xff800000-0xff800fff] has been reserved
    Oct 25 23:11:51 esprimo kernel: [ 0.337695] pnp: PnP ACPI: found 10 devices
    Oct 25 23:11:51 esprimo kernel: [ 0.337697] ACPI: ACPI bus type pnp unregistered
    Oct 25 23:11:51 esprimo kernel: [ 0.344177] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff]
    Oct 25 23:11:51 esprimo kernel: [ 0.344184] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff] (PCI address [0xc0000000-0xc00000ff])
    Oct 25 23:11:51 esprimo kernel: [ 0.344188] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0000000-0xf001ffff pref]
    Oct 25 23:11:51 esprimo kernel: [ 0.344192] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    Oct 25 23:11:51 esprimo kernel: [ 0.344196] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    Oct 25 23:11:51 esprimo kernel: [ 0.344203] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
    Oct 25 23:11:51 esprimo kernel: [ 0.344209] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
    Oct 25 23:11:51 esprimo kernel: [ 0.344217] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
    Oct 25 23:11:51 esprimo kernel: [ 0.344221] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    Oct 25 23:11:51 esprimo kernel: [ 0.344228] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
    Oct 25 23:11:51 esprimo kernel: [ 0.344233] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
    Oct 25 23:11:51 esprimo kernel: [ 0.344242] pci 0000:00:1c.2: PCI bridge to [bus 08-09]
    Oct 25 23:11:51 esprimo kernel: [ 0.344246] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    Oct 25 23:11:51 esprimo kernel: [ 0.344253] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
    Oct 25 23:11:51 esprimo kernel: [ 0.344258] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
    Oct 25 23:11:51 esprimo kernel: [ 0.344267] pci 0000:00:1c.3: PCI bridge to [bus 0a-0b]
    Oct 25 23:11:51 esprimo kernel: [ 0.344270] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    Oct 25 23:11:51 esprimo kernel: [ 0.344277] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff]
    Oct 25 23:11:51 esprimo kernel: [ 0.344283] pci 0000:00:1c.3: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
    Oct 25 23:11:51 esprimo kernel: [ 0.344292] pci 0000:00:1e.0: PCI bridge to [bus 10-10]
    Oct 25 23:11:51 esprimo kernel: [ 0.344294] pci 0000:00:1e.0: bridge window [io disabled]
    Oct 25 23:11:51 esprimo kernel: [ 0.344300] pci 0000:00:1e.0: bridge window [mem disabled]
    Oct 25 23:11:51 esprimo kernel: [ 0.344305] pci 0000:00:1e.0: bridge window [mem pref disabled]
    Oct 25 23:11:51 esprimo kernel: [ 0.344324] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Oct 25 23:11:51 esprimo kernel: [ 0.344340] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    Oct 25 23:11:51 esprimo kernel: [ 0.344354] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Oct 25 23:11:51 esprimo kernel: [ 0.344369] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Oct 25 23:11:51 esprimo kernel: [ 0.344515] NET: Registered protocol family 2
    Oct 25 23:11:51 esprimo kernel: [ 0.344736] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Oct 25 23:11:51 esprimo kernel: [ 0.346140] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    Oct 25 23:11:51 esprimo kernel: [ 0.350539] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Oct 25 23:11:51 esprimo kernel: [ 0.351125] TCP: Hash tables configured (established 524288 bind 65536)
    Oct 25 23:11:51 esprimo kernel: [ 0.351128] TCP reno registered
    Oct 25 23:11:51 esprimo kernel: [ 0.351140] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Oct 25 23:11:51 esprimo kernel: [ 0.351190] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Oct 25 23:11:51 esprimo kernel: [ 0.351517] NET: Registered protocol family 1
    Oct 25 23:11:51 esprimo kernel: [ 0.351792] Unpacking initramfs...
    Oct 25 23:11:51 esprimo kernel: [ 0.386851] Freeing initrd memory: 2168k freed
    Oct 25 23:11:51 esprimo kernel: [ 0.387649] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Oct 25 23:11:51 esprimo kernel: [ 0.387653] Placing 64MB software IO TLB between ffff8800bb6cb000 - ffff8800bf6cb000
    Oct 25 23:11:51 esprimo kernel: [ 0.387656] software IO TLB at phys 0xbb6cb000 - 0xbf6cb000
    Oct 25 23:11:51 esprimo kernel: [ 0.387684] Simple Boot Flag at 0x36 set to 0x1
    Oct 25 23:11:51 esprimo kernel: [ 0.388126] audit: initializing netlink socket (disabled)
    Oct 25 23:11:51 esprimo kernel: [ 0.388141] type=2000 audit(1319577100.386:1): initialized
    Oct 25 23:11:51 esprimo kernel: [ 0.400859] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Oct 25 23:11:51 esprimo kernel: [ 0.426083] VFS: Disk quotas dquot_6.5.2
    Oct 25 23:11:51 esprimo kernel: [ 0.426249] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Oct 25 23:11:51 esprimo kernel: [ 0.426431] msgmni has been set to 7912
    Oct 25 23:11:51 esprimo kernel: [ 0.426698] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    Oct 25 23:11:51 esprimo kernel: [ 0.426740] io scheduler noop registered
    Oct 25 23:11:51 esprimo kernel: [ 0.426743] io scheduler deadline registered
    Oct 25 23:11:51 esprimo kernel: [ 0.426795] io scheduler cfq registered (default)
    Oct 25 23:11:51 esprimo kernel: [ 0.427554] vesafb: mode is 1280x800x8, linelength=1280, pages=6
    Oct 25 23:11:51 esprimo kernel: [ 0.427556] vesafb: scrolling: redraw
    Oct 25 23:11:51 esprimo kernel: [ 0.427559] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
    Oct 25 23:11:51 esprimo kernel: [ 0.428029] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 2000k, total 7616k
    Oct 25 23:11:51 esprimo kernel: [ 0.436372] Console: switching to colour frame buffer device 160x50
    Oct 25 23:11:51 esprimo kernel: [ 0.444631] fb0: VESA VGA frame buffer device
    Oct 25 23:11:51 esprimo kernel: [ 0.444651] ERST: Table is not found!
    Oct 25 23:11:51 esprimo kernel: [ 0.444705] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Oct 25 23:11:51 esprimo kernel: [ 0.556935] Linux agpgart interface v0.103
    Oct 25 23:11:51 esprimo kernel: [ 0.557021] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Oct 25 23:11:51 esprimo kernel: [ 0.565540] i8042: Detected active multiplexing controller, rev 1.1
    Oct 25 23:11:51 esprimo kernel: [ 0.571121] serio: i8042 KBD port at 0x60,0x64 irq 1
    Oct 25 23:11:51 esprimo kernel: [ 0.571160] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Oct 25 23:11:51 esprimo kernel: [ 0.571193] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Oct 25 23:11:51 esprimo kernel: [ 0.571222] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Oct 25 23:11:51 esprimo kernel: [ 0.571247] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Oct 25 23:11:51 esprimo kernel: [ 0.571336] mousedev: PS/2 mouse device common for all mice
    Oct 25 23:11:51 esprimo kernel: [ 0.571726] rtc_cmos 00:07: RTC can wake from S4
    Oct 25 23:11:51 esprimo kernel: [ 0.571846] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    Oct 25 23:11:51 esprimo kernel: [ 0.571879] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    Oct 25 23:11:51 esprimo kernel: [ 0.571889] cpuidle: using governor ladder
    Oct 25 23:11:51 esprimo kernel: [ 0.571891] cpuidle: using governor menu
    Oct 25 23:11:51 esprimo kernel: [ 0.572134] TCP cubic registered
    Oct 25 23:11:51 esprimo kernel: [ 0.572137] NET: Registered protocol family 17
    Oct 25 23:11:51 esprimo kernel: [ 0.572145] Registering the dns_resolver key type
    Oct 25 23:11:51 esprimo kernel: [ 0.572248] registered taskstats version 1
    Oct 25 23:11:51 esprimo kernel: [ 0.584338] rtc_cmos 00:07: setting system clock to 2011-10-25 21:11:41 UTC (1319577101)
    Oct 25 23:11:51 esprimo kernel: [ 0.584402] Initializing network drop monitor service
    Oct 25 23:11:51 esprimo kernel: [ 0.585878] Freeing unused kernel memory: 712k freed
    Oct 25 23:11:51 esprimo kernel: [ 0.586059] Write protecting the kernel read-only data: 6144k
    Oct 25 23:11:51 esprimo kernel: [ 0.586200] Freeing unused kernel memory: 12k freed
    Oct 25 23:11:51 esprimo kernel: [ 0.589189] Freeing unused kernel memory: 776k freed
    Oct 25 23:11:51 esprimo kernel: [ 0.597134] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Oct 25 23:11:51 esprimo [ 0.603730] udevd[58]: starting version 173
    Oct 25 23:11:51 esprimo kernel: [ 0.672619] usbcore: registered new interface driver usbfs
    Oct 25 23:11:51 esprimo kernel: [ 0.672647] usbcore: registered new interface driver hub
    Oct 25 23:11:51 esprimo kernel: [ 0.673030] usbcore: registered new device driver usb
    Oct 25 23:11:51 esprimo kernel: [ 0.674352] SCSI subsystem initialized
    Oct 25 23:11:51 esprimo kernel: [ 0.677873] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Oct 25 23:11:51 esprimo kernel: [ 0.677909] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Oct 25 23:11:51 esprimo kernel: [ 0.677944] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    Oct 25 23:11:51 esprimo kernel: [ 0.677993] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    Oct 25 23:11:51 esprimo kernel: [ 0.678033] ehci_hcd 0000:00:1a.7: debug port 1
    Oct 25 23:11:51 esprimo kernel: [ 0.681945] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
    Oct 25 23:11:51 esprimo kernel: [ 0.696937] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    Oct 25 23:11:51 esprimo kernel: [ 0.697137] hub 1-0:1.0: USB hub found
    Oct 25 23:11:51 esprimo kernel: [ 0.697142] hub 1-0:1.0: 4 ports detected
    Oct 25 23:11:51 esprimo kernel: [ 0.701505] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 25 23:11:51 esprimo kernel: [ 0.701545] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    Oct 25 23:11:51 esprimo kernel: [ 0.701556] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    Oct 25 23:11:51 esprimo kernel: [ 0.701596] ehci_hcd 0000:00:1d.7: debug port 1
    Oct 25 23:11:51 esprimo kernel: [ 0.705494] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
    Oct 25 23:11:51 esprimo kernel: [ 0.716689] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Oct 25 23:11:51 esprimo kernel: [ 0.716825] hub 2-0:1.0: USB hub found
    Oct 25 23:11:51 esprimo kernel: [ 0.716830] hub 2-0:1.0: 6 ports detected
    Oct 25 23:11:51 esprimo kernel: [ 0.716937] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Oct 25 23:11:51 esprimo kernel: [ 0.717072] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    Oct 25 23:11:51 esprimo kernel: [ 0.717077] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
    Oct 25 23:11:51 esprimo kernel: [ 0.717692] scsi0 : ahci
    Oct 25 23:11:51 esprimo kernel: [ 0.719045] scsi1 : ahci
    Oct 25 23:11:51 esprimo kernel: [ 0.719275] scsi2 : ahci
    Oct 25 23:11:51 esprimo kernel: [ 0.719412] ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 44
    Oct 25 23:11:51 esprimo kernel: [ 0.719416] ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 44
    Oct 25 23:11:51 esprimo kernel: [ 0.719420] ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 44
    Oct 25 23:11:51 esprimo kernel: [ 0.746847] uhci_hcd: USB Universal Host Controller Interface driver
    Oct 25 23:11:51 esprimo kernel: [ 0.746905] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Oct 25 23:11:51 esprimo kernel: [ 0.746920] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    Oct 25 23:11:51 esprimo kernel: [ 0.746946] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    Oct 25 23:11:51 esprimo kernel: [ 0.746995] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
    Oct 25 23:11:51 esprimo kernel: [ 0.747159] hub 3-0:1.0: USB hub found
    Oct 25 23:11:51 esprimo kernel: [ 0.747164] hub 3-0:1.0: 2 ports detected
    Oct 25 23:11:51 esprimo kernel: [ 0.747249] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    Oct 25 23:11:51 esprimo kernel: [ 0.747261] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    Oct 25 23:11:51 esprimo kernel: [ 0.747269] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    Oct 25 23:11:51 esprimo kernel: [ 0.747309] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
    Oct 25 23:11:51 esprimo kernel: [ 0.747444] hub 4-0:1.0: USB hub found
    Oct 25 23:11:51 esprimo kernel: [ 0.747448] hub 4-0:1.0: 2 ports detected
    Oct 25 23:11:51 esprimo kernel: [ 0.747521] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 25 23:11:51 esprimo kernel: [ 0.747531] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Oct 25 23:11:51 esprimo kernel: [ 0.747539] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    Oct 25 23:11:51 esprimo kernel: [ 0.747571] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
    Oct 25 23:11:51 esprimo kernel: [ 0.747703] hub 5-0:1.0: USB hub found
    Oct 25 23:11:51 esprimo kernel: [ 0.747707] hub 5-0:1.0: 2 ports detected
    Oct 25 23:11:51 esprimo kernel: [ 0.747782] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Oct 25 23:11:51 esprimo kernel: [ 0.747793] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Oct 25 23:11:51 esprimo kernel: [ 0.747808] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    Oct 25 23:11:51 esprimo kernel: [ 0.747851] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
    Oct 25 23:11:51 esprimo kernel: [ 0.747982] hub 6-0:1.0: USB hub found
    Oct 25 23:11:51 esprimo kernel: [ 0.747986] hub 6-0:1.0: 2 ports detected
    Oct 25 23:11:51 esprimo kernel: [ 0.748061] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    Oct 25 23:11:51 esprimo kernel: [ 0.748072] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Oct 25 23:11:51 esprimo kernel: [ 0.748080] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    Oct 25 23:11:51 esprimo kernel: [ 0.748110] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
    Oct 25 23:11:51 esprimo kernel: [ 0.748253] hub 7-0:1.0: USB hub found
    Oct 25 23:11:51 esprimo kernel: [ 0.748257] hub 7-0:1.0: 2 ports detected
    Oct 25 23:11:51 esprimo kernel: [ 0.780858] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    Oct 25 23:11:51 esprimo kernel: [ 0.781254] scsi3 : ata_piix
    Oct 25 23:11:51 esprimo kernel: [ 0.781332] scsi4 : ata_piix
    Oct 25 23:11:51 esprimo kernel: [ 0.781722] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
    Oct 25 23:11:51 esprimo kernel: [ 0.781725] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
    Oct 25 23:11:51 esprimo kernel: [ 0.945132] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WW01, max UDMA/33
    Oct 25 23:11:51 esprimo kernel: [ 0.956905] ata4.00: configured for UDMA/33
    Oct 25 23:11:51 esprimo kernel: [ 1.033361] ata2: SATA link down (SStatus 0 SControl 300)
    Oct 25 23:11:51 esprimo kernel: [ 1.036698] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 25 23:11:51 esprimo kernel: [ 1.036718] ata3: SATA link down (SStatus 0 SControl 300)
    Oct 25 23:11:51 esprimo kernel: [ 1.037191] ata1.00: unexpected _GTF length (8)
    Oct 25 23:11:51 esprimo kernel: [ 1.094414] ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
    Oct 25 23:11:51 esprimo kernel: [ 1.094417] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    Oct 25 23:11:51 esprimo kernel: [ 1.095146] ata1.00: unexpected _GTF length (8)
    Oct 25 23:11:51 esprimo kernel: [ 1.095367] ata1.00: configured for UDMA/133
    Oct 25 23:11:51 esprimo kernel: [ 1.095550] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5
    Oct 25 23:11:51 esprimo kernel: [ 1.099063] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WW01 PQ: 0 ANSI: 5
    Oct 25 23:11:51 esprimo kernel: [ 1.106469] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    Oct 25 23:11:51 esprimo kernel: [ 1.106530] sd 0:0:0:0: [sda] Write Protect is off
    Oct 25 23:11:51 esprimo kernel: [ 1.106557] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Oct 25 23:11:51 esprimo kernel: [ 1.110030] usb 2-6: new high speed USB device number 2 using ehci_hcd
    Oct 25 23:11:51 esprimo kernel: [ 1.110723] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Oct 25 23:11:51 esprimo kernel: [ 1.110726] cdrom: Uniform CD-ROM driver Revision: 3.20
    Oct 25 23:11:51 esprimo kernel: [ 1.124994] sda: sda1 sda2 sda3 sda4
    Oct 25 23:11:51 esprimo kernel: [ 1.125379] sd 0:0:0:0: [sda] Attached SCSI disk
    Oct 25 23:11:51 esprimo kernel: [ 1.390019] Refined TSC clocksource calibration: 1994.999 MHz.
    Oct 25 23:11:51 esprimo kernel: [ 1.390026] Switching to clocksource tsc
    Oct 25 23:11:51 esprimo kernel: [ 1.642094] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    Oct 25 23:11:51 esprimo kernel: [ 2.026688] usb 4-1: new full speed USB device number 2 using uhci_hcd
    Oct 25 23:11:51 esprimo [ 3.411702] udevd[265]: starting version 173
    Oct 25 23:11:51 esprimo kernel: [ 8.010314] EXT4-fs (sda2): re-mounted. Opts: (null)
    Oct 25 23:11:51 esprimo kernel: [ 8.167612] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    Oct 25 23:11:51 esprimo kernel: [ 8.204049] Adding 2144672k swap on /dev/sda3. Priority:-1 extents:1 across:2144672k
    Oct 25 23:11:52 esprimo NetworkManager[699]: <info> NetworkManager (version 0.9.1.90) is starting...
    Oct 25 23:11:52 esprimo NetworkManager[699]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
    Oct 25 23:11:53 esprimo acpid: starting up with proc fs
    Oct 25 23:11:53 esprimo NetworkManager[699]: <info> VPN: loaded org.freedesktop.NetworkManager.openvpn
    Oct 25 23:11:53 esprimo acpid: 4 rules loaded
    Oct 25 23:11:53 esprimo acpid: waiting for events: event logging is off
    Oct 25 23:11:53 esprimo dbus[674]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
    Oct 25 23:11:53 esprimo polkitd[765]: started daemon version 0.102 using authority implementation `local' version `0.102'
    Oct 25 23:11:53 esprimo dbus[674]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
    Oct 25 23:11:53 esprimo NetworkManager[699]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: parsing Auto eth0 ...
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: read connection 'Auto eth0'
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: parsing Auto Hanculak ...
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: read connection 'Auto Hanculak'
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: parsing Auto paponet ...
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: read connection 'Auto paponet'
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: parsing Wireless connection 1 ...
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: read connection 'Wireless connection 1'
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: parsing Wired connection 1 ...
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: read connection 'Wired connection 1'
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: parsing labak6wpa ...
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: read connection 'labak6wpa'
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: parsing Wireless connection 2 ...
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: read connection 'Wireless connection 2'
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: parsing Auto papow ...
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: read connection 'Auto papow'
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: parsing withDNSSEC ...
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: read connection 'withDNSSEC'
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: parsing OpenDNS ...
    Oct 25 23:11:53 esprimo NetworkManager[699]: keyfile: read connection 'OpenDNS'
    Oct 25 23:11:53 esprimo NetworkManager[699]: <info> trying to start the modem manager...
    Oct 25 23:11:53 esprimo NetworkManager[699]: <info> monitoring kernel firmware directory '/lib/firmware'.
    Oct 25 23:11:53 esprimo NetworkManager[699]: <info> WiFi enabled by radio killswitch; enabled by state file
    Oct 25 23:11:53 esprimo NetworkManager[699]: <info> WWAN enabled by radio killswitch; enabled by state file
    Oct 25 23:11:53 esprimo NetworkManager[699]: <info> WiMAX enabled by radio killswitch; enabled by state file
    Oct 25 23:11:53 esprimo NetworkManager[699]: <info> Networking is enabled by state file
    Oct 25 23:11:53 esprimo NetworkManager[699]: <warn> bluez error getting default adapter: The name org.bluez was not provided by any .service files
    Oct 25 23:11:54 esprimo laptop-mode: Laptop mode
    Oct 25 23:11:54 esprimo laptop-mode: enabled, active
    Oct 25 23:11:54 esprimo kernel: [ 13.842399] EXT4-fs (sda4): re-mounted. Opts: commit=360
    Oct 25 23:11:55 esprimo bluetoothd[1182]: Bluetooth daemon 4.96
    Oct 25 23:11:55 esprimo bluetoothd[1182]: Starting SDP server
    Oct 25 23:11:55 esprimo modprobe: FATAL: Could not read '/lib/modules/3.0-ARCH/kernel/net/bluetooth/bluetooth.ko': No such file or directory
    Oct 25 23:11:55 esprimo modprobe: FATAL: Could not read '/lib/modules/3.0-ARCH/kernel/net/bluetooth/bluetooth.ko': No such file or directory
    Oct 25 23:11:55 esprimo modprobe: FATAL: Could not read '/lib/modules/3.0-ARCH/kernel/net/bluetooth/bluetooth.ko': No such file or directory
    Oct 25 23:11:55 esprimo modprobe: FATAL: Could not read '/lib/modules/3.0-ARCH/kernel/net/bluetooth/bluetooth.ko': No such file or directory
    Oct 25 23:11:55 esprimo modprobe: FATAL: Could not read '/lib/modules/3.0-ARCH/kernel/net/bluetooth/bluetooth.ko': No such file or directory
    Oct 25 23:11:55 esprimo NetworkManager[699]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus)
    Oct 25 23:11:57 esprimo acpid: client connected from 1201[0:0]
    Oct 25 23:11:57 esprimo acpid: 1 client rule loaded
    Oct 25 23:11:57 esprimo modprobe: FATAL: Could not read '/lib/modules/3.0-ARCH/kernel/net/ipv6/ipv6.ko': No such file or directory
    Oct 25 23:11:58 esprimo gdm-binary[1181]: WARNING: GdmDisplay: display lasted 2.122354 seconds
    Oct 25 23:11:58 esprimo modprobe: FATAL: Could not read '/lib/modules/3.0-ARCH/kernel/net/ipv6/ipv6.ko': No such file or directory
    Oct 25 23:11:58 esprimo acpid: client 1201[0:0] has disconnected
    Oct 25 23:11:58 esprimo acpid: client connected from 1217[0:0]
    Oct 25 23:11:58 esprimo acpid: 1 client rule loaded
    Oct 25 23:11:58 esprimo modprobe: FATAL: Could not read '/lib/modules/3.0-ARCH/kernel/net/ipv6/ipv6.ko': No such file or directory
    Oct 25 23:11:58 esprimo gdm-binary[1181]: WARNING: GdmDisplay: display lasted 0.049584 seconds
    Oct 25 23:11:58 esprimo acpid: client 1217[0:0] has disconnected
    Oct 25 23:11:58 esprimo acpid: client connected from 1223[0:0]
    Oct 25 23:11:58 esprimo acpid: 1 client rule loaded
    Oct 25 23:11:58 esprimo gdm-binary[1181]: WARNING: GdmDisplay: display lasted 0.094564 seconds
    Oct 25 23:11:58 esprimo acpid: client 1223[0:0] has disconnected
    Oct 25 23:11:58 esprimo acpid: client connected from 1227[0:0]
    Oct 25 23:11:58 esprimo acpid: 1 client rule loaded
    Oct 25 23:11:58 esprimo gdm-binary[1181]: WARNING: GdmDisplay: display lasted 0.087314 seconds
    Oct 25 23:11:58 esprimo acpid: client 1227[0:0] has disconnected
    Oct 25 23:11:58 esprimo acpid: client connected from 1231[0:0]
    Oct 25 23:11:58 esprimo acpid: 1 client rule loaded
    Oct 25 23:11:58 esprimo gdm-binary[1181]: WARNING: GdmDisplay: display lasted 0.047879 seconds
    Oct 25 23:11:58 esprimo acpid: client 1231[0:0] has disconnected
    Oct 25 23:11:58 esprimo acpid: client connected from 1235[0:0]
    Oct 25 23:11:58 esprimo acpid: 1 client rule loaded
    Oct 25 23:11:58 esprimo gdm-binary[1181]: WARNING: GdmDisplay: display lasted 0.069482 seconds
    Oct 25 23:11:58 esprimo gdm-binary[1181]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
    Oct 25 23:13:04 esprimo dbus[674]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
    Oct 25 23:13:04 esprimo dbus[674]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Initializing cgroup subsys cpu
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/5d093582-b21d-4a60-9376-258480024369 ro vga=864
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-provided physical RAM map:
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 00000000bf6d0000 - 00000000bf6df000 (ACPI NVS)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 00000000bf6df000 - 00000000c0000000 (reserved)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] NX (Execute Disable) protection: active
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] DMI present.
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] No AGP bridge found
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] last_pfn = 0xbf6d0 max_arch_pfn = 0x400000000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] found SMP MP-table at [ffff8800000f7ab0] f7ab0
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6d0000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] RAMDISK: 37dd2000 - 37ff0000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: RSDP 00000000000f78b0 00024 (v02 PTLTD )
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: XSDT 00000000bf6d28ce 00094 (v01 FSC PC 06040000 LTP 00000000)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: FACP 00000000bf6dbbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: DSDT 00000000bf6d3e38 07D26 (v02 WS C46_____ 06040000 MSFT 03000000)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: FACS 00000000bf6defc0 00040
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: APIC 00000000bf6dbcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: HPET 00000000bf6dbd2e 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: MCFG 00000000bf6dbd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: TCPA 00000000bf6dbda2 00032 (v01 Intel CRESTLN 06040000 00005A52)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: TMOR 00000000bf6dbdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: SLIC 00000000bf6dbdfa 00176 (v01 FSC PC 06040000 PTL 00000001)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: APIC 00000000bf6dbf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: BOOT 00000000bf6dbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: SSDT 00000000bf6d3b5b 002DD (v01 SataRe SataAhci 00001000 INTL 20060912)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: SSDT 00000000bf6d39be 0019D (v01 BrtRef DD01BRT 00001000 INTL 20060912)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: SSDT 00000000bf6d2eee 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: SSDT 00000000bf6d2e48 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20060912)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: SSDT 00000000bf6d2962 004E6 (v01 PmRef CpuPm 00003000 INTL 20060912)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: DMI detected: Fujitsu Siemens
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] No NUMA configuration found
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Faking a node at 0000000000000000-0000000140000000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Zone PFN ranges:
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Normal 0x00100000 -> 0x00140000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Movable zone start PFN for each node
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] early_node_map[3] active PFN ranges
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] 0: 0x00000100 -> 0x000bf6d0
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] 0: 0x00100000 -> 0x00140000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000bf6d0000 - 00000000bf6df000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000bf6df000 - 00000000c0000000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s78464 r8192 d23936 u1048576
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028186
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Policy zone: Normal
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/5d093582-b21d-4a60-9376-258480024369 ro vga=864
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Checking aperture...
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] No AGP bridge found
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Memory: 4048952k/5242880k available (4066k kernel code, 1058436k absent, 135492k reserved, 3302k data, 712k init)
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Verbose stalled-CPUs detection is disabled.
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] NR_IRQS:2304
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Extended CMOS year: 2000
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Console: colour dummy device 80x25
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] console [tty0] enabled
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] allocated 33554432 bytes of page_cgroup
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Fast TSC calibration using PIT
    Oct 27 20:49:25 esprimo kernel: [ 0.000000] Detected 1994.990 MHz processor.
    Oct 27 20:49:25 esprimo kernel: [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.22 BogoMIPS (lpj=6649966)
    Oct 27 20:49:25 esprimo kernel: [ 0.003343] pid_max: default: 32768 minimum: 301
    Oct 27 20:49:25 esprimo kernel: [ 0.003460] Security Framework initialized
    Oct 27 20:49:25 esprimo kernel: [ 0.003466] AppArmor: AppArmor disabled by boot time parameter
    Oct 27 20:49:25 esprimo kernel: [ 0.003888] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Oct 27 20:49:25 esprimo kernel: [ 0.008160] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Oct 27 20:49:25 esprimo kernel: [ 0.009314] Mount-cache hash table entries: 256
    Oct 27 20:49:25 esprimo kernel: [ 0.009770] Initializing cgroup subsys cpuacct
    Oct 27 20:49:25 esprimo kernel: [ 0.009807] Initializing cgroup subsys memory
    Oct 27 20:49:25 esprimo kernel: [ 0.009826] Initializing cgroup subsys devices
    Oct 27 20:49:25 esprimo kernel: [ 0.009828] Initializing cgroup subsys freezer
    Oct 27 20:49:25 esprimo kernel: [ 0.009831] Initializing cgroup subsys net_cls
    Oct 27 20:49:25 esprimo kernel: [ 0.009833] Initializing cgroup subsys blkio
    Oct 27 20:49:25 esprimo kernel: [ 0.009891] CPU: Physical Processor ID: 0
    Oct 27 20:49:25 esprimo kernel: [ 0.009893] CPU: Processor Core ID: 0
    Oct 27 20:49:25 esprimo kernel: [ 0.009895] mce: CPU supports 6 MCE banks
    Oct 27 20:49:25 esprimo kernel: [ 0.009909] using mwait in idle threads.
    Oct 27 20:49:25 esprimo kernel: [ 0.011091] ACPI: Core revision 20110413
    Oct 27 20:49:25 esprimo kernel: [ 0.016682] ftrace: allocating 16144 entries in 64 pages
    Oct 27 20:49:25 esprimo kernel: [ 0.020398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Oct 27 20:49:25 esprimo kernel: [ 0.054765] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
    Oct 27 20:49:25 esprimo kernel: [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    Oct 27 20:49:25 esprimo kernel: [ 0.056663] PEBS disabled due to CPU errata.
    Oct 27 20:49:25 esprimo kernel: [ 0.056663] ... version: 2
    Oct 27 20:49:25 esprimo kernel: [ 0.056663] ... bit width: 40
    Oct 27 20:49:25 esprimo kernel: [ 0.056663] ... generic registers: 2
    Oct 27 20:49:25 esprimo kernel: [ 0.056663] ... value mask: 000000ffffffffff
    Oct 27 20:49:25 esprimo kernel: [ 0.056663] ... max period: 000000007fffffff
    Oct 27 20:49:25 esprimo kernel: [ 0.056663] ... fixed-purpose events: 3
    Oct 27 20:49:25 esprimo kernel: [ 0.056663] ... event mask: 0000000700000003
    Oct 27 20:49:25 esprimo kernel: [ 0.073443] NMI watchdog enabled, takes one hw-pmu counter.
    Oct 27 20:49:25 esprimo kernel: [ 0.100007] Booting Node 0, Processors #1 Ok.
    Oct 27 20:49:25 esprimo kernel: [ 0.196683] NMI watchdog enabled, takes one hw-pmu counter.
    Oct 27 20:49:25 esprimo kernel: [ 0.203325] Brought up 2 CPUs
    Oct 27 20:49:25 esprimo kernel: [ 0.203328] Total of 2 processors activated (7983.46 BogoMIPS).
    Oct 27 20:49:25 esprimo kernel: [ 0.204847] devtmpfs: initialized
    Oct 27 20:49:25 esprimo kernel: [ 0.204847] PM: Registering ACPI NVS region at bf6d0000 (61440 bytes)
    Oct 27 20:49:25 esprimo kernel: [ 0.207119] print_constraints: dummy:
    Oct 27 20:49:25 esprimo kernel: [ 0.207208] NET: Registered protocol family 16
    Oct 27 20:49:25 esprimo kernel: [ 0.207333] ACPI: bus type pci registered
    Oct 27 20:49:25 esprimo kernel: [ 0.207504] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Oct 27 20:49:25 esprimo kernel: [ 0.207508] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    Oct 27 20:49:25 esprimo ker

Maybe you are looking for

  • Mail always creates To-Dos in IMAP folder.. message pop-ups annoying.

    I tried to create a new todo in Mail by right-clicking on a message and choosing the option. Apart from the text styling looking very ugly, I can't use this feature because a message keeps popping up: +Different versions of a To Do item have been fou

  • DPS Desktop tools for InDesign?

    The other day I saw this (link) about Adobe Digital Publishing Suite and was briefly interested in it.  I requested a demo to learn more about it, but somehow I was never able to learn much about it and soon I just forgot about it.   Later today I no

  • Roles and Responsibilities of an ABAP developer in Blueprint Phase

    Hi All , I am about to get into HR implementation project Where its in the blueprint phase , I just want to know what are the roles and responsibilities of an ABAP Developer in this phase ? Is there something to be done on the functional part .

  • WHEN-CUSTOM-ITEM-EVENT - not firing. Please Help

    Hi Grant, WHEN-CUSTOM-ITEM-EVENT - not firing. Please Help.. I need a help from you. 1) I have developed an form to browse the client machine and upload the file on server / table 2) Registered the form in Oracle Apps 11.5.10. 3) Currently i am able

  • Install CS6 Cloud App while still keeping CS4 Version

    How can I install a CS6 Cloud App while still keeping the CS4 version that is currently on my PC. I just installed Adobe Acrobat and it got rid of my acrobat 9. I can't have this happen with my Adobe Illustrator CS4 due to an add-in that is not suppo