Broken LCD Help Please

Two days ago my G4 PowerBook was open and fell approximately one foot and it hit the floor on the rear hinge, very lightly as well, and my LCD cracked from the lower left corner to the top right corner.
It was definitely my fault, however I am very suprised how easy the LCD cracked with such a gentle, short fall on a plush carpet.
Would I be better off buying a replacement LCD and trying to fix it myself, or getting someone else to fix it? Whatever the case, can someone please let me know the cheapest/best route? I really appreciate the help.
Thank you for your help in advance.

Hi, npmccann. It's often not the length of the fall, but the precise manner of the landing that determines how well or badly a Powerbook comes through the experience.
If you pay someone else to replace your display, it will likely cost more than the fair market value of your Powerbook — that is to say, you could buy an equivalent used PB in working condition for the same amount or less than the repair would cost.
If you're a highly skilled do-it-yourselfer and have appropriate tools, you can replace the LCD panel inside your Powerbook's display assembly, at some limited risk of damaging the new display or other components of the Powerbook. If you're a less skilled DIYer, you can replace the whole display assembly more easily, at greater expense. If you aren't reasonably dexterous and proficient with small hand tools, you'd be better off just replacing the Powerbook than tackling the display as a DIY project.

Similar Messages

  • BT Have nearly broken me HELP Please

    My saga started on the 11 july when I joined BT as a new customer, my service was due to be installed 5/8 but no engineer showed up. BT the cancelled my order completely in error.
    I had to reorder the service and wait another month for installation 6/9 an engineer did come and connect our phoneline but broadband failed to work.
    An engineer came out on 10/9 and said that the origional line had a fault and he connected another line and everything worked beautifully untill the 16/9 when i had a letter saying BT were stopping my service. That day My phoneline and broadband were cut off.
    I have made dozens of calls to BT, submitted 3 complaints and torn most of my hair out. Because my phone line is inactive i am unable to engage another service provider to take the line over.
    We have now also recieved our phone bill  HA...what a joke...for 6 days of service, hours spent on a mobile trying to get a resolution.
    No one seems to know what to do about this problem but I am without a landline and broadband. Please it should not be this difficult - 11 weeks of frustration for 6 days service come on BT!

    Hi Janeea
    Sorry you have had this experience.
    Send us an email using the contact the mods link in my profile you will be able to see it in the section 'About Me'.
    It will ask you to fill in a form, which will give us the information we need to help get this resolved.
    Thanks
    Stuart
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Administrator access is broken!  Help please?

    at some (very much unknown) point, I have apparently broken my core administrator access to ColdFusion MX7.  We are in the process of upgrading to Coldfusion 8, and as I went to review some information in the older system, I have found that I no longer have access to the Core site.  I'm running the Enterprise edition in a Multi-Server configuration on Solaris.
    I have absolutely no idea what is wrong and obviously no clue as to how it may have been broken.  I used it several weeks ago, it worked fine.  Now when I attempt to access the site via http://myhost.mydomain.name/CFIDE/administrator , I get a coldfusion error page that states "unexpected error #360 32"
    That is meaningless to me, but hopefully someone out here has seen this and can send me some advice as to "how" to get this repaired and get back into operation.
    Thanks to any and all help,
    Howard

    Hmmm....
    This is not my Coldfusion admin pages for the servers - this is THE coldfusion administrator for the entire jrun system (and all hosts within coldfusion)...that's the puppy that's "down" or unavailable.  I looked and see no evidence of a "cfclasses" folder in that part of my installation.  I just followed the directions was I did the initial installation, selected an external web server for the install, and on completion, I copied the CFIDE and cfdocs folders into that external web server's root directory.  Looking through my backups, I don't see any evidence of a cfclasses folder ever having been in the root area.
    Thanks

  • Is my ipod broken? Help, please!

    My ipod is making a scratchy, staticy noise that seems to be coming from the inside. It had the /!\ triangle and the ipod with a frowny face on it when I turned it on. What happened to it?

    The same exact thing happened to my ipod today!! It makes that weird noise then tries to turn on and then says very low battery please wait, but it is plugged into my computer. Anyone know how to fix this?

  • Ipod click wheel broken? Help please.

    I've had this Ipod for years, it sort of stopped working one day I don't remember exactly how/why but I just recently found it again and plugged into my sisters Ipod Dock to see if it would work, and it did charge up and would play songs. So I guess there is nothing wrong with it's hardware or software, but the click wheel does absolutely nothing. I can't adjust volume, switch songs, turn it on, turn it off, etc. and right now it's just playing songs in order they are on there as I took it off the Dock. Is there anything I can try to do to fix it? Thanks.
    (I am fairly sure its 5th generation, it's black with video and 30GB).

    I have tried to connect the iPod to my computer, but the iPod will not connect to the computer and is still restarting constantly.
      Windows XP  

  • Broken LCD!!! help needed!

    Hello, My 8900 now has a broken LCD and I cannot seem to find where to buy a new one! does anyone knows! help needed!

    Try HorizonWireless, check the link below in my signature.
    They are reputable parts dealers.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Broken Bonjour with Canon MF4350d after 10.6 upgrade - Help Please.

    I have been using a Canon 4350d with no problems with 10.5.8 - including Printer Sharing (Bonjour). Now, after updating to 10.6 (now 10.6.2) I can still print fine, but I have lost all Printer Sharing. All settings appear to be right, and my other macs appear to be printing through the one connected via USB to the printer, but it never goes through. HELP Please. Thank you.

    According to the UFR2 User Guide on page 2-8, the driver can be removed from the Mac by trashing the following folders. Note that you should delete the print queue first, by opening Print & Fax, selecting the MF model in the Printers list and pressing the minus button.
    System Volume > Library > Printers > Canon > UFR2
    System Volume > Library > Launch Agents > jp.co.canon.UFR2.BG.plist
    System Volume > Library > Printers > PPDs > Contents > Resources > en.lproj > CNTD**Z*2.ppd.gz
    (where * indicates the printer model and 2 indicates the language of driver used)
    With these files removed you can then empty the trash, although you may have to open Activity Monitor and stop the 'UFR II Backgrounder' service before you are able to remove all the files from the trash.
    With the v2.10 driver removed you are ready to add another driver. However you need to be aware that the v1.80 driver cannot be used on 10.6. If you were using it previously then it would suggest that the 10.6 Mac was an upgrade from 10.5 rather than a clean 10.6 install. On a clean 10.6 Mac, then v1.80 driver will not operate correctly.
    What you may be able to do is have the v1.80 driver installed on a Mac running Leopard and shared. You may then be able to use the v2.10 driver on the Snow Leopard Mac's to print to the Leopard share using the v1.80 driver. Note that I haven't tried this so I cannot say if this will work for you. Personally I always ensure I get a printer with Ethernet or wireless support so that I can avoid printer sharing...

  • New JAVA Update = Broken; HELP PLEASE

    Yesterday I was alerted to a new update for Java. I installed it and now JAVA doesn't work on this site I always use for work. Is this happening to anyone else? Any ideas on how to fix? Help please. Thanks.

    Yesterday I was alerted to a new update for Java. I installed it and now JAVA doesn't work on this site I always use for work. Is this happening to anyone else? Any ideas on how to fix? Help please. Thanks.

  • Broken Iphone? Please help

    I was using my iphone 4 and the screen went black and won't restart. I've already tried to reset it with many different methods. I then tried plugging it into my computer and its not being detected. Every few minutes the apple logo will pop up but then go away. HELP PLEASE!
    Thanks in advance.

    Standard troubleshooting...
    Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.  <---- most likely problem, IMO.

  • Did hp accept broken lcd monitors for exchange

    did hp accept broken lcd monitors for exchange

    Hello thiru_moorthy,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your LCD Monitor is broken, and I would be happy to assist you!
    Since your hardware is broken, I recommend contacting our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    By contacting our technical support, you will be able to find out your specific options for your broken monitor, and how to proceed past this point.
    I hope this helps!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

    I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

    Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
    My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire.

  • Need Urgent help please? I need to restore from a previous iphone backup.

    Oops, I admit it - I messed up but need help please?? I received a replacement iphone today. My broken iphone OS and my itunes had the latest software updates and I did a full backup before going to the store to get the rerplacement. However, when I got home with the replacement iphone and plugged it in, it asked if I wanted to update the OS on it. I made the mistake of saying yes. It then made a backup of the empty factory settings from the new replacement and restored from that rahter than the backup I made before going to the store. Yes I know I should have said no and just did the restore which would have resotred my previous backup that I made before going to the store. Then after everything would be allright I could have told it to update the OS.
    You can slap my in the face or I will do it myslef for making such a stupid mistake. All ready did the "I should have had a V" thing to my forehead.
    After seeing the restore was fromthe factory settings rather than my earlier good backup, I went into my documents and drilled down to the mobile sync backup and saw that one of the three folders (with giberish as a title) has a lot of information with the date and time I did the backup before going to the store.
    Could I possibly delete the later (factory setting backup) folder and then do a restore to get my good backup onto the iphone? I didn't do that yet in fear that it might mess something else up on the iphone and I wanted to check with you experts here first for guidance and assistance, PLEASE?
    I'll be anxiously awaiting any help you can give!
    Thank you!!

    rwmac22 wrote:
    Hopt and OneOrangeTree, Thank you both very much for replying!!
    It took me a long time to get back to the dissucison group because I tried both of your suggestions which therfore had to do about 4 restores. They take quite a while (about 50 minutes each actually). Your help got me half way there and is very apprecaited! I did manage (with your excellent help) to get most of my backup put onto the replaced iphone. the photos, music, and videos didn't get put over. I think I can move those back over by making sure they are selected in the seperate tabbed screens for the iphone. However, I can't get to those screens because every time I connect the iphone now, it brings up the "set up your phone screen". The one with the "an iphone has been previously synced with this compter" setup as new phone or restore from ....
    Well I did the resotre from 3 times and that page still comes up when I plug in the iphone. Yes, I did close itunes, reboot the PC, and powered off the iphone and then brouhgt it back up before connecting (all several times), but itunes still takes me to the same "setup iphone screen".
    Can you help me to get it to the standard iphone screen and there I will make sure the selected items are checked and do a sync.
    Please know I do appreicate your kind assistance so far and hope someone can get me the rest of the way!
    The "Backup" do not store your Applications, Music, Video's. It saves your settings, your application preferences, etc.

  • My ipod touch 3rd gen wont turn on or charge and laptop couldnt even detect it. no indication that its charging even in laptop no heat up at the back. how can i fix it? help please

    my ipod touch 3rd gen wont turn on or charge,laptop doesnt even detect it. no indication that its charging even in laptop no heat up at the back. how can i fix it? it happened after i plugged it in a socket then shows not supported with this accessory....help please.........thanks

    Try:
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • How do I retrieve photos/data etc. from my iPhone 4 before a completely erasing restore! It'stuck on a "connect to iTunes" to restore screen!  Help please!!!

    I connected my iPhone 4 to my PC to sync all my new info to iTunes/PC, but it said it was not able to recognize it and needs to do a complete restore!  How do I retrieve photos from my iPhone 4 before a complete restore! It'stuck on a "connect to iTunes" to restore screen and won't do anything else!  I tried rebooting the phone (holding the top button and the home button and the SAME "connect to iTunes" screen comes up.  If I restore, I will lose ALL my unsynced photos, apps, and data from the past week (INCLUDING pics from a concert WITH band members!) Help please!  MAYDAY!  My prior backup does NOT contain these photos/apps/data! Ahh!!!!

    I am having the same problems as this person. I see that someone said there is no way to retrieve the pictures once it gets stuck in recovery mode.
    Then further along someone said that there are data retrieval methods except they have something to do with jail breaking a phone.
    My phone is already jail broken. It was kind of a gift from the company I work for- it was a fellow employees before. He jail broke it and then it was given to me. After I got it I activated the 4 and tried to back up everything. It didn't work and "Springboard" forced the phone into safety mode. So I could use it with the old dude's apps and my contacts. I made the mistake of using the phone for wedding dress shopping with a friend. I took tons of pictures.
    After this I found out the messages I was seeing meant it was jail broken. At&t said to force restore the phone - iTunes wouldn't recognize it in safety mode. I'm an idiot and didn't realize what this meant for my pictures. It didn't work (error 1611) - thankfully. Now it is stuck in recovery mode (iTunes icon and USB cable picture).
    Can I access that media in any way? It never suceeded restoring itself so is it still there? The phone is jail broken already so is there a method I can use?

  • Help please problem with export

    I had some problems with safari on my imac (OS X) so I did some "repairs" I ended up deleting some keychains and I believe that is what cause the problem I'm having. However I don't know how to fix it.
    When I try to export RAW images from my Lacie rugged external hard drive to the desktop into jpg I get this error...
    "An internal error has occurred: ?:0: attempt to index field 'rootFile' (a nil value)"
    I have a deadline very soon (in about an hour) and need help please.

    Fantastic, these things always happen at the most inconvenient time!!!
    When you've got the job out of the way reboot the Mac and try the export to desktop again. If it is still broken then in Disk Utility run Repair Permissions on the Mac and La Cie.
    Who do I send the bill to???

Maybe you are looking for

  • HT1926 How do I install itunes to another drive, other than drive C

    Please help; I would like to install iTunes in my "new volume E" folder and it automatically installs in drive C. I don't see an option to change destination folder or an advanced option. ty

  • Can Captivate do this - or should I use Flash?

    I am trying to create a corporate sales presentation, with similar look/feel to this Flash preso: http://www.adobe.com/devnet/flash/articles/vidtemplate_corppreso.html I can handle the video/placement fine. But instead of the navigation buttons, on t

  • PM - Report - Equipment - Cost Details

    Hi, As per my the requirements i need to create a report for reporting on Equipment ID and the various key figures like Total Costs, Number of orders created till date, MTTR/MTBR etc in PM in one single repoort. I am able to get the Cost based on Ord

  • How do you change the name of the little house icon?

    Hi I would just like to know how to change the name of the little house icon?

  • IPhone blocked after call reject

    Hi, I have a little problem with my iPhone. When I reject a call in sleep mode (pressing twice the sleep button), the iPhone screen doesn't respond correctly, I have to lock and unlock again to respond the call.