Broken link; and a compatability question?

Howdy,
1. The PetStore 2.0 page
BluePrints: Code: http://java.sun.com/blueprints/code/index.html
appears to contain a borken link to:
Java Pet Store 2.0 Early Access: https://blueprints.dev.java.net/petstore/
... or is the petstore closed due to the economic downturn?
2. Will JRE 1.6_7 and Netbeans 6.1 suffice for the Petstore 2.0 sample ? Or should I upgrade everything before I start?
3. Do "The Sun Dudes" read this forum?
Cheers all. Keith.

Check what card you have and then go to the manufacturer's website and check there if your graphics card is OpenGl enabled.
If it is, download the corresponding driver from the manufacturer's website and install it on your system.
Some downloads are compresses (zipped), so you have to unzip and then install.

Similar Messages

Repeated problem of broken link and unused files

Hi ,
I am using RH8.0.2
I have updated my RH8 to RH8.0.2 and then fix all broken link and did what was advised.i got result, everything was fine, I was a happy man. Today when i open the same project for updation, i found again plenty of broken links and unused file in the same project.
Is there any permanent solution of the problem of broken links and unused file or i have to fix it every time when i open my project?
Plz help!!!
Br,
Rahul

Hi Rahul.
Two things. Firstly some of the paths you have in your project are very long. In the example you have given we are seeing less than half the path. This may not be the problem but it maybe in the future. Secondly, as Peter has suggested, the problem maybe related to source control. Do you use it? I have heard of instances where (e.g. .FPJ) files cause issues.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Every time I try to get on youtube or netflix on safari all I'm getting is a white background and a lot of links and boxes with question marks in them, what is going on?

Every time I try to get on youtube or netflix on safari all I'm getting is a white background and a lot of links and boxes with question marks in them, what is going on?

Make sure your system software is up to date.
Click the Apple  menu (top left in your screen) then click: Software Update ...
And try troubleshooting Flash. Uninstall then reinstall.
http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,prob1=fnctn,prob2=game,

Broken Links and Deleted Template

First: I have 13 pages of broken links. Where is the link to
training for improving these links? Secondly: When viewed in
Firefox, and when Tools, Error Console, is observed on each page, I
have the following ERROR on pages that I attempted to use a
Template, and then deleted the Template: "Uncaught exception
Permission denied to call methodLocation.to String." What do I do
about this error?

>
http://www.upowerpoint.com/tools_books+movies_catalogs.html
There are no broken links on that page
http://validator.w3.org/checklink?uri=http%3A%2F%2Fwww.upowerpoint.com%2Ftoo
ls_books%2Bmovies_catalogs.html&hide_type=all&depth=&check=Check
What specific issue, on what specific page?
Or perhaps restate your original question in a different way?
Note- the + in the filename may present problems when linking
TO to this
file.
ran the link check on entire site.
There was only one internal broken link.
there's maybe a dozen external links with problems.
this page:
http://www.upowerpoint.com/clients.htm
The link to the css file is broken.
<link href="../Stylesheets/style.css"
clients.htm is in the public root of the site. There is no
way for a
relative path to go UP one folder level from there.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Comcast Online Seems to Have a Broken Link and is not working!

Seems that when i sign into http://xfinitytv.comcast.net/ to watch online content, this is the message i receive: "Hmmm, we're having trouble finding that page.It's probably because the page has moved or is no longer available. If you typed in the address, you may want to double-check your spelling. If you think you've found a broken link, please let us know.Go to the XFINITY TV homepage." I only watch via online due to being out of the country for a month. Please advise!

sethascope69 wrote:
Seems that when i sign into http://xfinitytv.comcast.net/ to watch online content, this is the message i receive: "Hmmm, we're having trouble finding that page.It's probably because the page has moved or is no longer available. If you typed in the address, you may want to double-check your spelling. If you think you've found a broken link, please let us know.Go to the XFINITY TV homepage." I only watch via online due to being out of the country for a month. Please advise! The link you supplied worked for me, so I'm going to guess that since you said you are out of the country, that might be the issue. Sometimes content is only allowed to be streamed within the borders from where it was produced. The error message you are receiving might not be very helpful, but I think you are getting it because you are out of the country.

Broken links and javascript on OMWB page

Link to "mysql 5 bundle" (http://www.oracle.com/technology/software/tech/migration/workbench/index.html#MySQL5) goes no where (does not scroll down the page).
Link to section "2.2" also broken. Text is "** For MySQL5 Beta Release see step 2.2" takes you to 404.html
When i tried to download, page complained that i had not agreed to licence, despite the fact that the "Accept License Agreement" radio button was checked.

I have updated the page and fixed the navigation links. Thanks for altering us to this.
The radio license agreement has the "accept" checked by default, you need to click on the "Accept" radio button and will then get a "Thank you..." response. You can then select whatever you want to download.
Do you know about the new Migration Workbench that currently in Preview release? This support migration from Microsoft SQL Server, Microsoft Access and MySQL. The new Migration Workbench will be an integral part of Oracle SQL Developer and is due for production release soon. For more information see the latest news under SQL Developer on OTN: http://www.oracle.com/technology/products/database/sql_developer/index.html
Regards
Sue Harper

Strange problems and processer compatibility questions

i have the K7N2 DELTA - ILSR and i have had some problems, ive replaced the borad twice be cause it just died for no apperant reason. One day i was usng it and my webcam was in the second slot on the top of my mainboard and sumthing happend and i couldnt get a picture thru my cam so i switched ports, worked fine no biggie. well i just got an mp3 player, its a nextech, i plug it in my pc and it lagged alto and when it did show up in my computer it would regester it as not there even tho it shows it, i know the mp3 player is fine cause it works fine on my laptop. is my board fuzzeled again or am i just having compatability issues? If so i will exchange it for a gigabyte board i thing cause there reliable and ive had exprence using them.
My other question is i have the amd athlon 2500+xp and i was wondering of the 3200 would work fine on tm K7N2 DELTA - ILSR with the nforce 2 chipset
other than thoes problems the board is great and plays all my games very smoothly.
i also have another question is my Geforce fx 5600 worth keeping or should i upgrade to the 9800 pro or wait for the x 800xt to come down in price?
thx.

a delta can take up to xp3200
but you would be better of with an xp2500 and overclock it instead.
k7n2 has noise sensitive usb ports.
do you have an usb2 hub you can connect to the motherboard and then connect the usb devices to that one and try ?
seen many cases where this worked.
did you read the moan guide ?
its very hard to do something without a complete picture of what you got.
i have seen people having trouble with usb devices for many different reasons.
how strong is the psu ?
i want the amps not the watt as they can show VERY wrong.
is written on a label on the psu. 3.3v 5v and 12v.
have you tried http://www.memtest86.com to check memory ?
k7n2 is memory sensitive.
is usb2 enabled in bios or only 1.1 ?
k7n2 is a very sensitive motherboard but when you get it to work it works like a dream.
mine has been up and running 24/7 since i bought it last year and most crashes i have is when i try to run 10 year old dos games which xp dont like.

CS5 table of contents broken links and missing bookmarks

I'm having an issue with the table of contents in a .pdf. I'm working on a 112 page document in InDesign CS5. After exporting the .pdf, I realized that the file would be far too large to upload to the website. I used "reduce file size" in Acrobat Pro to make it smaller and chose the option to make it compatible with Acrobat 5.0 and later. The table of contents worked fine, all bookmarks appeared and links worked but the file was still too big. I did the same thing again but for version 4.0 and later and now the file is an appropriate size but the table of contents doesn't include all of the bookmarks and certain links don't work. Any help is appreciated!

Don't go down to 4. Consider v5 a minimum. I prefer v7 as a minimum. v4 doesn't support smarty features. Generally, the higher the version number, the more clever it is at squeezing file size. But really, the single biggest factor in PDF file size is your choice of how many ppi the bitmap images are sampled down to. Did you try setting them down to 100 ppi, for example?

Broken ipod and apple care question

Hi
I bought my 2nd gen nano 7 months ago and it is now broken. I've done everything I could beside opening it. I wanted to know if i bought apple care now and then send them my ipod right after if that would be problem?
btw the problem is that my songs gets played at 1/4 of the speed (makes the songs intrusting but...)
thanx
vince

I don't think the OP dropped his in the bathtub.
Hopefully you haven't tried to turn it on, connect it to the computer or anything like that.
If you are good with electronic devices you can take the iPod apart and set it in a cool, dry place and leave it there for several days. For pictures on how to take it apart go to http://www.ifixit.com.
If you aren't good at taking things apart, just set it aside or buy some silica gel packets (like the ones that come in boxes with things you buy, but you need new ones) and put them, and the iPod, in a sealed plastic bag and let it sit for a couple of days.
After it dries, connect it to power (a wall charger is preferable) for at least 30 minutes then Reset it (hold down the menu and center buttons for at least 6 seconds). If it starts up connect it to your computer, Restore it in iTunes, and then fully charge it.

K8N Diamond plus HSF and memory compatability question

I am considering this board since I need a good onboard sound chip to utilize my front breakout box. At this time I have an opteron 180, a Zalman 7700 and 2 gb kit of Corsair XMS TWINX2048-3500LLPRO on the way from ZZF. I had planned on using this on an Asus A8N SLI deluxe but if the hardware is compatible I would rather have the SB onboard than the Realtek on the Asus.
Does anyone know if the Zalman will fit on this board and clear the northbridge heatsink and fan? I had seen in another post the the MSI boards might not care for Corsair to well, any validation on this?
Thanks!

Tricker61,
As you can see by my signature I am using the Diamond Plus with a full two pair of TWINX2048-3500LLPRO’s.
It was not plug them in a go, but it just requires setting the memory up manually, which is really set forward.
The only problem is that the current BIOS do not the memory to SPD values and here is a list of setting you will have to set manually.
(1)   FSB/Memory Ratio is set by default to 1:2, which needs to be changed to 1:1.
(2)   Memory Module Voltage Corsair spec is 2.7 – 2.9, default BIOS setting is 6.5V. I am running mine at 2,75V.
(3)   Corsair spec timing 2,3,2,6, BIOS Default is 2,3,2,5 so you need to set that.
As far as memory set for your Corsair memory you have they are working fine and system is stable.
You wanted 2.6 GHz; I am currently run FSB of 225 MHZ and with default multiplier of x12, which is one BIOS defaults that is correct. My system running solid at 2.7 GHz and the memory is running DDR450, which better the Corsair spec.
Therefore, with the memory modules you should get the performance you said you wanted. I feel with all the memory setting corrected I could running it up more, first 225 MHz is the speed I could not make with default BIOS setting and I am not and Over-clocker like you, if want a good solid fast system.
If you have not purchased a case yet, make it a big one with lots of fans. I am using the Cooler Master CM Stacker 810 and have just moded the case to add two extra right side 120mm input fans in place of the stock 80mm fan and I am just starting to get the system temperatures under control. With to two new fans that makes 4 120mm input fans and 120mm, 85mm and the power supplies 135mm fan for exhaust. I have been using 120mm fan with 35 to 40 CFM each, to try and keep the noise down, but it looks like an a few more CFM to input fans and put up with the added. But it is a nice system now, you the noise of the air flow , but no actual fan sounds, except for the Graphics Card when is cycles it fan to high speed, which much less with two add right side 120mm fans.
Hope this information helps you selecting components for your new system.
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it.

P67A-C45 (B3) CPU and Memmory Compatibility Question

(sorry to my english)
Hi all i hawe 2 queestions i have CPU G630 and memorry (RAM) work to 1333MHZ if i activated in bios XMP to work on 1600 i have some problems stop working on windows, My friends tell g630 dont suport 1600ram
i dont have more money but i wont to give my cpu to friend and buy G860 becose my friend have it and i see he work with 1600MHZ but he have Z77 MB not as mine (,
1 will work my RAM on 1600MHz if i put G860 CPU to my MB?
2 i see to Global site have update bios 22nm to this mb is really posible this ? if i wont a 22nm cpu need to upgrade or bios in not for my MB ? becose on start this mb is for 32 nm?
MSI P67A-C45(B3)
Intel G630 2x2,7
Kingston Blue 2x4gb ram 1600MHZ
.....

if my P67A-C45(B3) work with Intel Core i3 2130 tray or CPU Intel Pentium G860 on Ram X.M.P. 1600MHZ i will buy some this but not wont to risk
if upgrade i sell mb+cpu and buy next
if Z77A-G43 or G45 i buy Intel® Core™ i3 3240 i dont like SLI or owerclocking and mabby is G43 low cost
if Z87-G43 i buy Intel Core i5-4570 Haswell but is to hight costs mb and cpu and have some problems with money.
i ask you all becose to my country Moldova we dont have more money on job to buy extrime somfing and i wont last tehnologis to me ))) i like Z87-G43 is good but not have some low cost cpu (
I'm afraid that MSI will go strictly by 1150 socket, and will only continue to develop them, and forget about 1155

Deleting songs and scanning for broken links.

I've encountered a couple weird problems today. I've read through every area of the preferences, right-clicked everywhere I can think of in the iTunes window to see what pops up in those menus, and can't find the solutions to my problems.
1) It used to be that when I tried to delete a song from iTunes, it would ask if I wanted to delete it from the PC. It doesn't do this anymore, but I really wish it did. Is there a way for me to delete something from my iTunes library AND my PC with one action?
2) Since I could not delete songs through iTunes, I went straight to where my music files reside and deleted them that way. I know iTunes can scan the library for broken links and stuff -- it's done it before, though I don't know what triggered it. How can I make it scan my list for broken links and remove them? I deleted something like 300 songs -- that's a lot of links to delete individually.
I'm not computer illiterate. I've right-clicked everywhere, gone through all the menus and the preferences menu and still can't figure out how to get iTunes to do these basic functions. It's really frustrating because I know it's done them before. Please help.

open itunes, right click on the song you want to delete, click clear.. and why are we not allowed to give you a link. This is FREE help, and any link could have told you told you that.

ICal reminders for iPod and notebook battery have broken links

iCal reminders for iPod and notebook battery have broken links and are not functioning. I went to http://www.apple.com/batteries/ipods.html and midway down on the right side is a link to install a ical reminder. That link does not work with my laptop.
It sends me this link "webcal://www.apple.com/images/ipod_icalreminder.ics" but I immediately get an email message stating:
Error subscribing to the calendar
No calendar was found on http://www.apple.com/images/ipod_icalreminder.ics. Please check the URL.
Likewise, the same thing happens for my notebook. Is there another URL or does anyone have connections at apple to reinstate this dead link.

Hope this helpful.
THX

How do I restore files from TM backups with broken links?

I have Time Machine backups with broken links all over the more recent backups.
I get the message "The alias “xxx” can’t be opened because the original item can’t be found." whenever I click on one of the links.
I have made the backups on my external usb backup drive before before upgrading my internal disk to a larger one.
Two questions: 1) How can I recover the files? 2) What happened, how can I repair the backup if possible?
The sequence of events was: Made the latest backup. Apple ran extended diagnostics overnight at the store and did a reinstall of the OS (10.8.2). I passed on restoring the backup and went to an authorized service center and had them put in a new tera-byte drive. I deleted (in the star-wars display) the oldest two and a middle backup leaving the Aug, Oct, and latest Nov. backups.
Now I see 100's 1000's of bad links. If I look at the backup (just look) with finder I can see directories for July and Sept in addition to the ones I didn't delete.
It appears that the files are probably all there and I could recover them a few at a time if I poke around.
I am tempted to do this before trying to repair the disk. Yes, it will take me ages; but I would rather take the time than a chance at doing -Anything- that could even possibly make things worst. I can see 3 senarios and wonder if anyone can say what would be best. And by best I mean **Safest**.
1) Go in TM to the Aug backup that seems to have no (or maybe only a few) broken links and restore that; then move in TM to newer backups and restore one folder or file at a time on top of it.
2) Do the same thing with a restore of Aug but then use the finder to copy newer files from the backup disk to the new disk.
3) Do essentially the same thing; but do it all in finder.
Of course that still begs the question of what happened and if the backup can be repaired; but to me, that is secondary to getting the data back.
fyi- I have looked at the TM hints and debug-repair file. I realize I can try a repair disk but I am tempted to try to get the data 1st unless someone is Sure a repair won't mung the data more.
Thanks

The section titled "Restoring data from Time Machine backups" in the following may help: http://support.apple.com/kb/HT1427

CS3 - How can I preserve Links and Hyperlinks in my INDB?

I am still pretty new to ID, so please speak slowly :)
My problem - I create an INDB that consists of several indd chapters. The chapters include numerous Links (to PNG & PSD images) and Hyperlinks both to Text anchors to other chapters within the INDB, as well as to URLs. I have all items saved on my local HD. Once complete, I do "Package for Print", check the Preflight report to make sure all is OK (it is) and then save the new INDB folder in a new location on my local HD. This all seems to work just fine, BUT if I move this packaged INDB folder (such as to a backup drive, or give to another worker that copies it to their HD), upon opening the INDB file, some links and Hyperlinks are broken.
It seems that these broken Links and Hyperlinks are still pointing to the original locations on my HD. But obviously not all are, since most links/hyperlinks DO work fine. The Hyperlinks to Text anchors within other indd chapters seem to typically break. Is there a way to force these to reference the packaged assets within the INDB folder? Seems ID would be smart enough to look there itself!
Also, I was creating some Hyperlinks as "cross referenced" - that is, I created a URL Hyperlink Destination in Chapter 1 indd and then created Hyperlinks pointing to it from other chapter indd in the book. I have learned that these ALWAYS break in the above scenario, so I started creating the URL destination within the same chapter indd and pointing to it there rather than across chapters. But this is just more work to keep re-creating the same URL destination in every indd!
I'll keep running into these problems since I need to share my finished INDB with other CS3 users. I also would like to be able to do a Save As of the INDB when creating a revised, newer version, but I see this also results in the new INDB links/hyperlinks still pointing to the original INDB's assets! Any way to make the Save As update the Links/Hyperlinks in the new INDB?
Thanks greatly for any insight. I can find no help in the Help on these issues!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

Broken link; and a compatability question?

Similar Messages

Maybe you are looking for