Broken map symbol with question mark.

My parents IMac gives a broken map symbol with question mark when they tried to start the computer. What can I do to solve this problem?

Flash Player uses its own browser plug-in.
What happens when you get a QT ? means the association to Flash Media isn't going to the correct plug-in.
Since QuickTime can't play most modern Flash Media files is throws back an error (QT logo and the ?).
It also means the Flash Media plug-in is not being used.
Turning off QuickTime (removing the plug-in) can't fix a Flash Media plug-in error. Each user must remove the association by editing the MIME Settings found in the QuickTime Control Panel (PC) or the QuickTime System Preferences/Advanced tab.
As always with these edits or adjustments the browser must be quit and relaunched for these changes to take effect.

Similar Messages

Possibly crashed.... Now flashing folder symbol with question mark.

Hi
I think my iMac crashed tonight. It kept freezing, and i couldnt force quit anything. I restarted, and then none of my programs would open, and i couldnt click on anything. I held in my power button, shut it off and kept it held in. Then a blank white screen came up and stayed there for about 10 minutes. Then a flashing folder with a question mark came up. Im not sure what happened or what to do. Your help is GREATLY appreciated.
Sarah
Message was edited by: Sarah CMac
Just a spelling mistake

First, Try to verify the disk with disk utility found in your install dvd.
The flashing question mark means that the computer can't find a system.
There must be a system error
Unless the hard drive failed, then you should be fine with a reinstall.
(if you hear a clicking sound, then yes, sadly the hard drive is failing.)
Message was edited by: Mad Maxx

Quicktime symbol with question mark on 7.6

What does it mean when there is a question mark over the quicktime symbol when i try to play a online movie.

HI,
You need to install QuickTime 7 on her MBP.
http://support.apple.com/kb/HT3678
Carolyn

Quicktime symbol with Question Mark on top

My daughther needs to access some audio files for a Spanish class through her college "blackboard" website. We replaced her iBook G4 with a Macbook Pro this weekend. Now when she goes to the website to play the audio clips, they show up as a "Q" with a "?" on top of it. For some reason, they will not play on Safari 4 and Quicktime under Snow Leopard. She was using Safari 4 & Quicktime under 10.4.11 on the iBook and it worked fine.
I had her switch to Firefox and the audio files embedded in the website play just fine. I selected the file to see what format it was -- it is "Track3.mp3".
Any suggestions as to why this doesn't work with Safari under Snow Leopard?
Message was edited by: Thrifty One

HI,
You need to install QuickTime 7 on her MBP.
http://support.apple.com/kb/HT3678
Carolyn

Every once in a while when I open my mail or a page I get nothing but strange lines of symbols. Many of the symbols are black triangles with question marks in the center. I completely reset it like new, but problem still exists

Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center. I have reset the ipad2 to new condition but the problem still exists.

A reset does not make tthe iPad "like new."
First, let's ensure that we agree on just what is a Reset...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Flashing folder icons with question mark

After reading through the forums I've found a few discussions and users that have similar problems as me but haven't seen anything that deals directly with my issues.
After upgrading to Leopard last night, it ran sluggishly for about 15 minutes. I got impatient and decided to restart. While trying to restart it froze, so I just shut my powerbook down. When I tried to boot back up I got the "flashing folder icons with question mark", I've since found out that it isn't finding any type of drive to boot off of. I reset the pram, tried to reboot with the same result. Tried to boot up using cmd-s but still got nothing but flashing folders. Booted up from the Leopard install disc to try and do an archive and install and it said it couldn't upgrade because it couldn't find tiger on my machine. So I booted from the Tiger install discs to try and re-install tiger again. Tiger cant find my HD to install on; I'm thinking this may be due to Leopards install. I ran disk utility and it couldn't complete the verifying process. I got this "Error: The underlying task reported failure on exit."
After work I'm going to try to boot up in target mode to pull any data i can and try erase my HD and install from there.
To me it seems like a HD issue. Anyone have any thoughts?
Thanks in advanced.
-Chance

Chank wrote:
After reading through the forums I've found a few discussions and users that have similar problems as me but haven't seen anything that deals directly with my issues.
After upgrading to Leopard last night, it ran sluggishly for about 15 minutes. I got impatient and decided to restart.
The "sluggishness" is perfectly normal. It's well-known and it is not an issue.
You should have waited for spotlight to finish indexing.
You may have broken some links by forcing a shutdown while things were still being setup.
Which install method did you use, upgrade, archive or erase?

HT1366 How to fix Flashing Folder with Question Mark on Mac

How to fix Flashing Folder with Question Mark on Mac

RichardEL is probably correct. I’ll go through your questions.
> there is no Mac OS partition, I assume it would be directly underneath the HD on the left?
I have not seen this particular condition where the hardware disk icon appears but the system volume that is supposed to be below it does not. The System Disk partition would be below the HD icon indented to the right. It is usually called “Macintosh HD” unless you renamed it.
> when I go into disk utility my HD appears on the left, but I can repair or verify it
Odd. It appears but you cannot manipulate it with Disk Utility.
> The S.M.A.R.T status reads verified
If it did not say Verified then it would indicate a problem. Saying Verified does not rule out problems but I think it indicates it is still breathing.
> Is the HD deceased?
If you booted the Recovery Partition (Boot, Command-R), which it sounds like you did, then at least part of the disk is still breathing. If it took a long time to boot then that may have been a Network Recovery boot which would indicate the disk is very sick or dead.
> [If I] restore from time machine [will] everything will be back as it was before?
Yes. That is the beauty of Time Machine. All your data, applications, and system preferences will be as they were as of the last backup.
> I was thinking of erasing the HD, would this be of any help or do I just need a new one?
Given what you reported from the Disk Utility steps you took it is unclear to me if there will be a way to repair the current volume, if you can erase and install from scratch or if you need a new disk. Before proceeding it may be useful to have an expert at an Apple store look at it for you. They may be able to revive it without a clean install or new disk.
As was the case above, it could be a good disk with a bad cable in which case a new disk is not going to help. To test this you can purchase an inexpensive external enclosure, remove the internal disk, place it in the enclosure, plug it in and then use Boot-Option to attempt to boot from the now external disk. Here are links to the screwdrivers and enclosure you would need.
$5 Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
$22 USB 3.0 enclosure: http://eshop.macsales.com/item/OWC/ES2.5BU3W/
If you attempt a clean install, use the Partition tab to repartition the disk, selecting one partition and with “Options…” electing a GUID partition. Then use the Erase tab, select “Security Options…” and set it to write a single pass of zeros. This will write to every sector to map out bad blocks. (If you have an SSD do not write a pass of zeros.)
If you do need to replace it I recommend an new inexpensive (~$100) and super-fast hybrid SSHD drive that has an 8 GB SSD cache that makes the data fly. Google “Seagate 1 TB hybrid SSHD”.

Blue quicktime "Q" with question mark in the middle

Not sure if this is the same as blue boxes with question mark issue that others have discussed or if I need to tweek some quicktime setting, as I'm getting the blue quicktime "Q" symbol with a question mark in the middle. This ony happens on some web sites and I'm at a loss.
I justed switched to a mac, so any directions on how to sort this would be great.
Mac book Mac OS X (10.4.8)

Welcome to Apple Discussions and Mac Computing
Can be a bit confusing during the transition.
Have a look at this earlier post from today for a somewhat similar problem. Particular attention to the first part regarding the Quicktime and Flip4Mac settings. Also, make sure you have Flip4Mac installed, as Windows Media Player is not a Universal Binary application, hence can not run natively on your machine. Flip4Mac automatically converts the WMV files to QuickTime. And make sure your Flash plug-in is up to date.
Post back

Help. flashing gray folder with question mark on startup, then no startup.

on startup, macbook pro showed flashing gray folder with question mark, but no startup. after several retries, now shows circle with diagonal diameter, and still no startup. worked fine yesterday. suggestions?

Hi! I had the same problem as you. (I had a 2004 emac) all i had to do to boot it up was press enter and that seemed to do the trick but a grey folder might signify your missing files (Computer is broken) or its a network startup. Try it out!

Hard disc dead??? flickering folder with question mark on start up

I get a flickering folder with question mark on start up, and i cant get into mac osx.
I tried the hardware test and it detected no problems. Ive tried to do an install with the disc but no harddisc was detected to install it on.
I cant believe my harddisc is broken all my work is gone (backing doesnt help with configurations etc)

I know many of you don't understand english. Basicly what the articel tells us is that there is a problem with the harddrive due to a contruction caused error.
I would say please do something about it. Start a program to solve this problem
Thank you very much (my seagate still works, lets see for how long!!!
Der Festplatten- und Datenrettungsspezialist Retrodata aus der englischen Grafschaft Hampshire gibt eine beunruhigende Warnung an MacBook-Besitzer heraus. Apple-Notebooks, in denen ab Werk Seagate-Festplatten arbeiten, sind nach seinen Untersuchungen mit einem Fabrikationsfehler konfrontiert, der zum Totalausfall der Festplatte mit einhergehendem Datenverlust führen kann.
Nach eigenen Angaben erhält der Spezialist eine Vielzahl dieser ausgefallenen Platten zur Wiederherstellung von Daten. Die Untersuchungen von Retrodata zeigen, dass der Schreib-Lesekopf der Festplatte mechanisch ausfällt. Dies führt dem Spezialisten nach zu tiefen Kratzern auf der Oberfläche der magnetischen Scheiben mit entsprechenden Datenverlusten.
Anwender können schnell selbst feststellen, ob ihr MacBook gefährdet ist. Die betroffenen Segate-Platten sind ausgestattet mit der Firmware in Version 7.01. Zeigt der System-Profiler, zugänglich über den Befehl “Über diesen Mac… / Weitere Informationen” im Apfel-Menü, in der Kategorie Serial-ATA ein Laufwerk mit der Hersteller-Kennung ST und der Versionsnummer 7.01, dann besteht nach diesem Bericht ein hohes Ausfall-Risiko. Die Firma rät allen betroffenen Anwendern ein Backup der Daten anzulegen und umgehend ihren Händler zu kontaktieren.

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Hard drive crash? Folder with question mark

Hi everyone! I had problems with my macbook pro (early 2013). Last week, it slowed down suddenly and the laptop heats up during sleep. Then the hard drive recently crashed, at least I thought it crashed after it showed the folder with question mark during startup and did not show my old hard disk drive. Now I bought a 1TB WD mainstream hard drive disk, unfortunately it does not detect it in the internet recovery (disk utility). Now my question is, Do I have to do something with the hard drive first for my laptop to detect it? Like formatting it? The box said that it is compatible with mac OSx Lion, but my internet recovery lets me install Mountain Lion only. Is that the problem? or is the problem internal like the cable that connects the hard drive to the logic board?

That depends on the type of drive you have. If it is a standard external drive (in an enclosure) you can connect the drive with a USB cable.
If it is a bare drive like this:
You will have to put it an enclosure and get a usb cable. External drive enclosure are < $10. They come in two sizes, 2.5" and 3.5". Buy one that's correct for your drive. http://www.amazon.ca/MOGOI-Enclosure-External--Silver-Accessory/dp/B00HC107R6/re f=sr_1_5?ie=UTF8&qid=1404755872&sr=8-5&keywords=disk+enclosure

MacBook Pro flashes file folder with question mark and startup manager will not run

My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
in response to Niel
Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

Frequent startup with question mark folder icon--a diagnostic challange!!!

I recently obtained a 500 mhz G4 Cube; I transplanted memory, video board, video riser board, and DVD/CD drive from my old (dead) 450mhz G4 Cube (logicboard and DC-DC board were fried) to the 500 mhz Cube AND I added a Western Digital 80gb hard drive. The problem involves frequent startups with the question mark folder (Mac OS logo alternates with question mark).; Eventually the system folder is found and OS 10.4.11 starts up--sometimes in 20 seconds and sometimes in 3, 4, 5 minutes or longer..........I have tried 2 brand new batteries after numerous PRAM (via keyboard) and CUDA resets (depressing the CUDA button on the motherboard just once and then installing the new battery). The battery terminals in the Cube look perfect--no corrosion. With the new battery, startups were fine for a day but now 4 out of 5 times, I will get the question mark folder. Using Disc Utility, I fixed any errant permissions and the hard drive checks out with zero problems. Once running, the Cube works great, but these startups are maddening. One other issue; if I start up with the G4 Cube 9.1 installation disc, the install program DOES NOT recognize any bootable discs; whilst starting up using the Tiger Upgrade install disc, my 2 bootable discs (partitions of my Western Dig. hard drive) ARE recognized. Any ideas would be greatly welcome!!

I believe I have solved the problem regarding the question mark startup---> after rechecking all cable connections to HD, OD, and logic board, I revisited the jumper setup on the HD; it turns out that I set the HD up to be the MASTER, but what I should have done was set the HD to be the MASTER with attached SLAVE. Since reconfiguring the jumper, all startups have so far been normal. Also, I did install OS 9 drivers, but I the OS 9.1 install disc still does not recognized my 5 gig partition when starting up from the CD; this is minor in retrospect as I can still use the classic mode with a earlier version of OSX that does not hog so much disc space.

Broken map symbol with question mark.

Similar Messages

Maybe you are looking for