"Broken" NICs and General Stability Issues with Neo 4 Platinum
I have a XP Pro SP2 system with a Neo4 Platinum that is behaving very strangely.
I've been getting increasingly frequent bluescreens (mostly low level kernel errors and such) while under moderate to heavy load for the past few weeks. I gave up and reinstalled XP Pro this weekend to try to fix the problem. The errors have continued, and during the install process I noticed several more hardware problems that seem to have slowly been getting worse.
The second (non-nVidia) gigiabit NIC is completely missing, i.e. it does not show up in Windows nor on the integrated peripherals screen in the BIOS. In addition, I do not get a link light when I plug it into a switch. According to the manual and my memory, there should be similar options for the second NIC as I'm currently seeing for the nVidia one in the BIOS.
In addition, the nVidia-based NIC does not function close to properly. Whenever I download a file or do any sort of network activity, the data that I get is corrupted. Zip files and installers that verify downloads report CRC errors and SSH connections/file transfers just plain die, complaining about bad packets.
It doesn't seem to be a heat problem, because, watching the temps in the BIOS after a bluescreen, the CPU is at most 45, and usually less. I don't have any of the overclocking options enabled, just the "optimized defaults" except for disabling the boot splash screen. I've tried BIOS 1.6, 1.8, and 1.9, all of which have the same issues. I have the latest motherboard and graphics drivers.
Anybody here have any idea about what's going on? Thanks in advance.
System:
XP Pro SP2
K8N Neo4 Platinum
Athlon 64 3200+ (Venice Core)
2x Corsair 512 MB DDR400
GeForce 6800GT
2x WD 250 GB SATA
Seagate 120 GB IDE
NEC IDE DVD-RW
Soundblaster Audigy PCI
Enermax 425W PSU
You haven't installed the Nvidia Firewall have you? That cause my system to be unstable and blue screen a lot. Removed the Nvidia firewall problem sorted. I don't know about the marvell nic not working, does it show in device manager?
Similar Messages
-
Will apple cover my broken screen and now internal issues with my iPhone
Hello, I recently dropped my iPhone 3GS with an incase on it and the screen broke. I know apple doesn't usually cover these drops. But ever since dropping it my phone has not been working well. At times I can't send or recieve any texts or go on the Internet until I turn it on and off again. I have to do this multiple times a day. Would apple cover this and give me a new one or what can I do to fix it?
There are a couple of options you can check, and none of them are Apple. First, does InCase warranty against damage to the phone? Also, some credit card provide damage protection for items bought with the card. And finally check your homeowners or renters insurance.
-
Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"
Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel -
Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands
Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands - as I have multiple numbers for people (ie: iPhone, Work, Home), is it the BlueAnt that is having the issues or the iPhone? Tried to eliminate info on my partner's contact in with only 2 contact numbers (iPhone, Home) and one or the other is totally screwing up. Seems, from BlueAnt website, that it would be the iPhone contacts...and the guessing begins?!! Anyone else have similar issues when BlueAnt S4 was paired and giving 'Phone Commands'?? Any suggestions would be beneficial as I've spent way too much time on the web looking for a good fix/answer. Thanks.
On your new phone: Settings>General>Reset>Erase All Content & Settings. Start over, this time using your new ID.
-
i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns -
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport -
I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?
Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden -
I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Next and previous button issue with Prettyphoto in filtered gallery
Hi there,
I'm stryggeling with a next and previous button issue with Prettyphoto in filtered gallery.
Like to have it like this: http://demohtml.templatesquare.com/think/portfolio.html#!prettyPhoto
(next and previous buttun are there as well social connection)
My problem is this: http://finca-sonrisa.bitl.nl/sonrisa_gallery.html
(social connection is there but no next and previous buttons??)
Anybody who has a solution fot this. Have tried to change the CSS, Javascript and has followed the instructions from Prettyphoto but without any succes.
Your help we muchly appriciated,
Best Regards,
Rolfbump PLEASE HELP
-
Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?
Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?
-
hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.
the error is like "Could not load Apple Qmaster preference pane"
if there is a way around it please help me coz I cannot render my video projects on Compressor anymore... -
Playback pauses and audio sync issues with live video stream
I'm seeing playback pauses about every three seconds and audio sync issues with our live demo stream when using the OSMF/Strobe player. It happens on both our 2Mbps 720p stream and our 480p 750Kbps stream so it does not seem to be related to higher resolution/bandwidth streams. It also happens if I point directly to a stream asset or if I point to a .f4v with both streams listed for dynamic so it does not seem to be related to dynamic streaming specifically.
The same live streams play back very well without pauses or audio sync issues in the Akamai's dynamic player and even slightly better with JW 5.2.
I have viewed the OSMF/Strobe playback on three different laptops of various age (3 months to 2 years) and two are Windows and one is Linux. I have also tried the various buffering options on the Flash Media Player Setup and Strobe setup and it has not made a noticeable difference.
To see the stream with the Akamai player, go to: http://live.kulabyte.com
To see the stream with the OSMF/Strobe player, go to: http://live.kulabyte.com/osmf
I do not have JW set up for public viewing yet, but the two above show the distinct difference.
We are really hoping to start pointing our customers towards the OSMF player because of the support provided by the community and Adobe, but we have to get the quality of the playback to be acceptable first.
If someone has ideas on debugging I can PM the actual video assets to you.
Thanks,
TimHi Tim,
You need to add this setting:
dynamicStreamBufferTime=8
The actual value can be higher or lower. The best practice is to use a value that is twice the keyframe distance. Anyway, try different values and see which performs the best for your content.
I know that the setup page does not contain this option and it is not documented in the UserGuide. We simply missed it. Sorry.
Also note that the dynamic buffering algorithms are not being used for dynamic streaming content. I tried to explain this here:
https://sourceforge.net/adobe/smp/wiki/Dynamic%20Buffering/
Looking forward to your confirmation that this solved your issue.
-Andrian -
I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.
I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!
-
Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls helpLindsay,
Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard. -
HT1768 Updated to itunes 10.6.40 and notice stability issues in the mini player
Updated to itunes 10.6.40 and notice stability issues in the mini player, anyone have same issues ? can anyone help ?
Shipitbysea wrote:
... anyone have same issues ? can anyone help ?
Why don't you describe the issues so we know what you are talking about.
BTW: You posted in the iTunes for Mac forum.
Maybe you are looking for
-
ITunes 11.1 won't let me manually transfer music from my library to my iPod.
I just updated my iTunes to Version 11.1 and installed iOS 7 onto my iPod Touch. I'm trying to manually add all of the music from my library onto my iPod but it won't let me. - Under the "Summary" tab I have the option "Manually Manage Music & Video
-
what are the settings required for upload bps,products,orders from r/3 to crm in middleware,r/3 and crm?
-
Spry Vertical Menu and other problems
Hi all, I'm having a hard time using DW efficiently. Right now I have 2 or 3 problems on this webpage: www.novaparentalidade.com From the simpler to the harder: How can I make my background grad stay on the bottom of the browser? Right night is set i
-
Can flash send me a .PDF file of what a user created?
Hey, Is it possible for my published flash site on the internet to send me a .PDF file of a character that a user has made on my flash site? I can't seem to find an answer anywhere. Thanks in advance
-
Dear Frds I have to open a pdf file when i click the button... the pdf file should be kept in the application using webdynpro.... How to keep the pdf file in my application or how to keep pdfile resource in server.... Thanks in advance G .kumar