Broken on the first day HELP

hello have just bought a iphone 5 and in the first day the lock button has jammed down what can i do please HELP many thanks declan

It's under warranty. Take it back.

Similar Messages

I've bought a few songs recently and they played the first day but now it says that i need to Authorize my computer with is already authorized How can I fix this?

Ive bought a few songs recently and they played the first day but then when i go to play them again it say i need to Authorize the computer which is already authorized I don't understand can someone help me??

Hello there, HelpMePlease117.
There is a good Knowledge Base article that helps resolve authorization issues you might want to look over:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Any one of the steps listed there should help you get to the bottom of your issue and resolve it for you.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

ABAP for the first day of the month

Hello BW users,
I have a scenario which uses an ODS with cumulative key figures with Addition update type. An infocube gets data from ODS by start routine in cube's update rule. I update this ODS first then infocube. All the loads are Full and are loaded daily. This is a snapshot scenario and I load the ods on itself then load from another infocube let's say Cube1. After successful load, I update infocube on itself again then update from the same infocube, Cube1, as in ODS. Infocube load sequence is same as ODS. In the scenario ODS and infocube are wanted to be updated daily. Therefore, I have to delete the ODS's (since it is addition update type) and infocube's overlapping data in the process chain that automates the load. At this point I need two things:
1- ABAP program that is going to give me the first day of each month.
2- ABAP program that is going to delete the overlapping data in ODS when I load it daily. Since I can do that for infocube in process chain with standard process type of Delete overlapping requests from infocube I need it only for ODS. Because there is no standard process type to delete overlapping requests in ODS (since its update type is Addition).
I appreciate your help. Thank you in advance.
Sincerely,

1- ABAP program that is going to give me the first day of each month.
if sy-datun+6(2) = 01.
SY-FDAYW should give you the day
endif.
2- ABAP program that is going to delete the overlapping data in ODS
REPORT <PGM NAME>.
TABLES: RSODSACTREQ , rsseldone.
Parameters : odsname type RSINFOCUBE default '<>ODS NAME'.
DATA: temp_REQUEST LIKE RSODSACTREQ-REQUEST,
      temp_REQUEST1 LIKE RSODSACTREQ-REQUEST,
      temp_RNR LIKE rsseldone-RNR.
DATA: BEGIN OF itab OCCURS 0,
      REQUEST LIKE RSODSACTREQ-REQUEST,
      TIMESTAMP LIKE RSODSACTREQ-TIMESTAMP,
      END OF itab.
DATA: BEGIN OF itab1 OCCURS 0,
      RNR LIKE rsseldone-RNR,
      seldate LIKE rsseldone-seldate,
      seltime LIKE rsseldone-seltime,
      END OF itab1.
SELECT REQUEST TIMESTAMP FROM RSODSACTREQ INTO TABLE itab
WHERE ODSOBJECT = '<ODS NAME>'.
SORT itab DESCENDING BY TIMESTAMP .
READ TABLE itab INDEX 1.
temp_REQUEST = itab-REQUEST.
SELECT RNR seldate seltime FROM rsseldone INTO TABLE itab1
WHERE source = '<Info Source Name for the ODS>'.
SORT itab1 DESCENDING BY seldate seltime .
READ TABLE itab1 INDEX 1.
temp_RNR = itab1-RNR.
*If   temp_REQUEST = temp_RNR .
CALL FUNCTION 'RSSM_PROCESS_REQUDEL_ODSO'
EXPORTING
    I_ODS             = odsname
    I_REQUEST         = temp_REQUEST
    I_JOBNAME         = 'i_jobname'
    I_VARIANT         =
    I_INSTANCE        =
IMPORTING
    E_ERROR           =
    E_T_MSG           = itab1
E_T_RNRLIST       =    ITAB1.
*else.
*raise exception.
*endif.
clear itab.
refresh itab.
SELECT REQUEST TIMESTAMP FROM RSODSACTREQ INTO TABLE itab
WHERE ODSOBJECT = '<ODS NAME>'.
SORT itab DESCENDING BY TIMESTAMP.
READ TABLE itab INDEX 1.
temp_REQUEST1 = itab-REQUEST.
if temp_REQUEST = temp_REQUEST1.
raise exception .
endif.

Changing the calendar settings: Sunday as the first day of the week

Dear Masters of SAP universe,
In ECC6.0, I am using a LIS info-structure with the period split set to week.
I would like to know how can I change the calendar settings in order to consider Sunday as the first day of the week, instead of Monday.
For example:
A sales order created on Dec 12th creates the record 201049 in the info structure S900 - SPWOC.
I would like to have it as 201050, where 50 is the currently week in the system.
I already checked OSS notes and the transaction SCAL for customizing. But I did not find a solution this issue.
Your help is highly appreciated!

hi,
this seems to be a calendar issue.
please check for OSS also - 1158474.
balajia

Changing the first day-of-the-week on the MyTimesheets app

IN the SAP ECC and Portal implementations of the timesheet app, we were recently able to change the display so the first day of the week is listed as Monday, rather than Sunday. I would like to do the same thing with Fiori.
That is, when the app starts up the first view a calendar view of the whole month. If a person wants to enter time manually, they click the button labeled "manual" and a data entry screen pops up. The first day of the week listed across the top is Sunday, which does not reflect our settings in ECC. We need the 1st day of the week to be Monday.
Is there a configuration change we can make to force the 1st day of the week to be Monday, as it is in ECC?
thanks for your help!
-Rob Solomon

Hi Rob,
Are you using Wave2 app? You could change the setting for first day of the week in CAC1 and Fiori Timesheet app will adjust te calendar accordingly.
Nothing needs to be done for Fiori app.
Please update UIX01HCM to SP03 if you are using Wave2 app?
Best Regards
Pankaj

Want to make Monday as the first day of the week in GregorianCalendar. how?

hi
I need to know what day is the first of the month is. for example the 1st of Nov 2004 is Moday and 1st of Dec 2004 is saturday.
I am using the GregorianCalendar:
1. GregorianCalendar calendar = new GregorianCalendar(2004,11,1); //set date to 1st Nov 2004
2. int firstDay = calendar.get(Calendar.DAY_OF_WEEK);now firstDay is 2. This is because the week starts from Sunday, so Monday is the 2nd day.
But I am in Uk and my Uk Calendar shows monday as the first day (even in Windows 2000 Calendar).
I would like the GregorianCalendar to have Monday as the first day of the week, so that the
int firstDay = calendar.get(Calendar.DAY_OF_WEEK);
returns 1 in the above case.
I also tried adding
calendar.setFirstDayOfWeek(Calendar.MONDAY); just between line 1 and line 2, but it did not help.
This is because i don't want to manually subtract 1. If i manually subtract one, then the program might not work in other locale and timezones.
Also if I subtract 1, then for 1 Feb 2004,
int firstDay = calendar.get(Calendar.DAY_OF_WEEK);
will return 1 as 1st Feb 2004 falls on Sunday. so if i subtract 1 it will be 0, so I have to do a extra checking for 0.
Is there anyway to make the Calendar have Monday as the first day of the week??
Tanveer

hi
I need to know what day is the first of the month is.Why does this matter? Since we know that 1 == Sunday and 2 == Monday... Why do you need Monday to be == 1? and couldn't you just subtract 1 if it's so important?
for example the 1st of Nov 2004 is Moday and 1st of
Dec 2004 is saturday.
I am using the GregorianCalendar:
1. GregorianCalendar calendar = new
GregorianCalendar(2004,11,1); //set date to 1st Nov
2004
2. int firstDay = calendar.get(Calendar.DAY_OF_WEEK);now firstDay is 2. This is because the week starts
from Sunday, so Monday is the 2nd day.
But I am in Uk and my Uk Calendar shows monday as the
first day (even in Windows 2000 Calendar).
I would like the GregorianCalendar to have Monday as
the first day of the week, so that the
int firstDay = calendar.get(Calendar.DAY_OF_WEEK);
returns 1 in the above case.
I also tried adding
calendar.setFirstDayOfWeek(Calendar.MONDAY);[/cod
] just between line 1 and line 2, but it did not help.
This is because i don't want to manually subtract 1.
If i manually subtract one, then the program might not
work in other locale and timezones.
Also if I subtract 1, then for 1 Feb 2004,
int firstDay = calendar.get(Calendar.DAY_OF_WEEK);
will return 1 as 1st Feb 2004 falls on Sunday. so if i
subtract 1 it will be 0, so I have to do a extra
checking for 0.
Is there anyway to make the Calendar have Monday as
the first day of the week??
Tanveer

How to set the First Day of the week in OBIEE 11g

In OBIEE 10g, there was a timeline.pcxml , that allowed you to change the First Day of a week (Default Sunday) to monday etc etc..
Where can we find the same in OBIEE 11g ?
Thank you ,
Smrithy

There are probably several ways. We have a universe string object named "Month" which is in the format "YYYY" then "M" and the month number. For instance any date in June 2010 would have in this object:
2010M06
So we made this variable in Webi for [First Day of Month]:
=ToDate(Right([Query1].[Month];2) + "-01-" +Left([Query1].[Month];4);"MM-dd-yyyy")
Hope that helps.

Need the first day of the year and last day of the year.

hi all,
i need a function module which can get me the first day of current year and last day of the current year??
please help.

Similar date questions are being asked ALL THE TIME. Please search.

HT5479 My brand new ipod nano is no longer connedting to my brand new jbl wireless speaker. It worked fine the first day and now either cannot find the apeaker or the connection "fails." Any advice?

I bought my dad a new ipod nano and a jbl wireless speaker from the same apple store. Everything worked perfectly with the bluetooth connectivity the first day. Then my dad accidentally hit the "forget this device" button when he was trying to turn the bluetooth off. Now the nano either does not recognize the device or it will recognize the device but not connect. I would appreciate any advice.

Does it charge on a computer? Does it appear in iTunes?
If so:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Also see:
- See:
iPod touch: Hardware troubleshooting
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

Function module to get the 'first day of next month'

Hi
I have a selection screen with input fields
1. period (month eg: 07)
2.year(fiscal year eg: 2008 )
If user enters 07 as month and 2008 as year, then I have to display 08/01/2008(MM/DD/YYYY) as output.
Requirement is to calculate the 'first day of next month'
I have written code for this requirement.But I am asked to use function mdule.
Please help me in this regard.
Thanks&Regards
Rama.Mekala

hi try this FM ...
HR_JP_MONTH_BEGIN_END_DATE
it gives the Begin Date and End date of the month
rewards points if found useful
regards,
Balaji

How to return the week number starting from Sunday as the first day

Hi Friends,
My application needs to have a report for the weekly totals and must have the Sunday as the first day for the week. For example, January of 2005 should be in the report for having six weeks, Jan 1 is Saturday, this is week 1, Week 2 is from 2 to 8, and the last week , week 6 has 30 and 31. Days need not be displayed, only the week number as follows:
Week Number Total Sales
=========== =========
Week 1 8,525
Week 2 8,168
Week 3
Week 4
Week 5
Week 6
The discoverer hierarchies function for week (eul_date_trunc(item_date, '"W"W')) seems to start the week from the first day of the month regardless of the day. Oracle function TO_CHAR(item_date, 'W') does the same thing, .As the result, the January of 2005 has only 5 weeks.
Any help or advice for this issue will be greatly appreciated.
Thank you very much,
J.K

Try this
---------------------------------------------actual formula---------------
select ceil(
( to_number(to_char(to_date('1-'||to_char(sysdate,'MON-YYYY'),'DD-MON-YYYY'),'D')) -1
+ to_number(to_char(sysdate,'DD'))
) / 7
week_number
from dual
e.g try different dates below by replacing 31-Jan-2005
select ceil(
( to_number(to_char(to_date('1-'||to_char(to_date('31-JAN-2005'),'MON-YYYY'),'DD-MON-YYYY'),'D') ) -1
+ to_number(to_char(to_date('31-JAN-2005'),'DD'))
) / 7
week_number
from dual
How does it work
week number is calculated by dividing the current day number by number of days
so in your case if the week starts at a different day , you just add the offset and divide by 7
In the first part, i am finding the week day number for the 1st day of the current month and this is used as offset.
Hope this helps
-nj
http://www.infocaptor.com

For two days I have been getting intermitant interference sounding like a radio program with the first day in Spanish.

I have 7.0.1 and Lion installed on a Mac book pro. The first day Spanish programing just started playing with no one at the computer. The second day the interference was in English having to quit Firefox to get it to stop.
I rebooted and cleaned the system but it has reoccurred. I have used iGoogle as my default homepage flawlessly for 2 years with this only occurring after I sign into iGoogle from the Google search page.
This machine is used for business only and not exposed elsewhere. Any thoughts before I remove and reinstall?

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js

I can't find something that was there on the first day

On the first day of exploring my iMac, I stumbled across this utility where you could pick a person, man or woman, and pick a language and also a nationality. For example, you could pick a guy named Pierre, choose English, and French nationality, and it would speak in English with that accent. I think but am not sure it had something to do with creating an avatar to use somewhere.
I haven't been able to find it since, although I have searched everywhere I can think of. I don't know what application it was in. The only thing I have on here that didn't come with the machine is iWork, so I'm sure it was something in an application or utility that came with the machine.
Does anyone recognize what it is I'm talking about, and where I could find it again?

No, there was a box that contained an animated cartoon character of a guy or a woman depending on what you chose, and then some names underneath, each having a different voice/language. I remember the voice called "Pierre" which was specified as Quebec French. You could then type in a sentence or some words, and click play, and the character would speak it in the language/accent that you chose. I've gone through the whole help file, and everything in the System Preferences, and can't find it. I've also checked the help files for iChat and Photobooth, and anything else that looks relevant.

Can anyone tell me how to get 888 poker to work om my airbook? Strange thing is the instant play version worked on the first day i tried it, but not since.

As the title. Worked ok on the first day, since then the instant play tries to load but does not. Have downloaded flash to no avail.
Any help greatly appreciated by this Mac noob.

:"In order to access the Java Applet you need to have the following ports open when you are accessing the Internet;
21, 25 and 110"
What 888 sent me.

On my iPad 3, how do I make calendar items lasting more than one day appear as such on the monthly view of my calendar? Right now only the first day of the item appears.

On iPad 3, all of my calendar items lasting more than one day do not appear correctly when looking at the monthly view of the calendar; only the first day of the appointment appears. For example, if I am taking a vacation for 4 days, only the first day of the vacation is marked on the calendar, instead of being listed on all 4 days. When I look at the weekly view, however, it is correct and is listed on all 4 days. The problem here of course is that at a glance, there is no way to look at my monthly schedule. On my iPhone, everything is correct, regardless of month or week view, so clearly this is an iPad problem I guess? Please advise on how this can be corrected. Thank you!

Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.

Broken on the first day HELP

Similar Messages

Maybe you are looking for