Broken screen cant connect to pc companion

can someone please help me.screen is broken and need to get my concacts off phone and on to my pc...my phone is connected to the laptop but have to unlock screen on phone,but cant as the screen is broken..please help i sure there must be away around this so i can get my concacts back photo's ect...

Contact your local Xperia care
http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • Broken screen / cant get my docs out

    Hi All,
    The inevitable happen and I dropped my Touchpad. The glass is completely shattered. Unfortunate, but not what the problem is. I have some very important files ( notes ) which I desperately need to recover. The Touchpad is working, booting and all, except the touch input. When I connect via USB to my MAC I am asked to verify if I want it to connect as USB device ( upper right corner , USB or Charge buttons ) but i can't touch and confirm as the touch input is not working?!? Is there any way to get my docs ? Desperate to have my notes safe in my computer. And off coarse I need a quick solution ( not chaining the whole screen etc. I have this weekend to solve this or I am in trouble. Thanks a bunch.
    Mark
    Post relates to: HP TouchPad (WiFi)

    Hello royoung77,
    As http://support.apple.com/kb/TS3694 suggests, the one thing all those error codes have in common is security software. In fact that is the only cause of error 21.
    Check out my page if you need assistance with disabling security software on a windows PC: http://www.errorchannel.net/itunes-error-1600-1601-1602.aspx
    Note:
    As per these forums terms and conditions section 2.6, while no advertising is currently present this may change in future, therefore:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • HELP! iPhone 3G stuck on apple logo and occasionally switching to yellow screen, cant connect to computer!

    Hello everybody,
    A few days ago my iPhone 3G 8GB was working fine, i believe the battery went dead and as i charged it up again it was stuck on the apple logo.  I plugged it into the computer and no response, i tried rebooting the iPhone and putting it in DFU mode, but none of them worked.  Occasionally the iPhone switches from being stuck in the apple logo to a yellow screen, about every 10 minutes.  PLEASE HELP!!!!!

    First of all, make sure that it is fully charged (charge for at least 30 minutes). Second, hold down the home and the sleep/wake button simultaneously for 10 - 20 seconds until the apple logo appears. If nothing works, try to backup the phone (if possible) and put the phone into recovery mode. To get that, open itunes and connect the phone to the computer. Press and hold the Home button and the Sleep/Wake button at the same time. As soon as the screen goes black, release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPhone in recovery mode. You can now restore the iPhone using iTunes.

  • Connecting a DELL  monitor to a broken screen G4 powerbook

    Hi
    I want to connect a tft monitor to a broken screen G4. Can I do this without being able to use the computer screen to configure the settings.
    ......I was thinking about a std VGA connection into the mini DVI via an adaptor......but then realized it might not be the 'plug and play' simplicity I had first thought it might be.
    Maybe someone has done this and had some success!
    thanks
    Ral

    You might want to repost in the 12-inch PowerBook area instead of the 17-inch forum. My 17" has a full-size DVI port, not the mini, so finding people who've tried multiple adapters may be easier in the other forum.
    Still, I believe that, as long as the computer detects the second display at startup, it should "just work."

  • CONNECTING DELL MONITOR TO BROKEN SCREEN G4

    Hi
    I want to connect a tft monitor to a broken screen G4. Can I do this without being able to use the computer screen to configure the settings.
    ......I was thinking about a std VGA connection into the mini DVI via an adaptor......but then realized it might not be the 'plug and play' simplicity I had first thought it might be.
    Maybe someone has done this and had some success!
    thanks
    Ral

    Verify your Powerbook G4 you have is indeed a mini-DVI and not a mini-VGA port Powerbook G4. There were in fact two distinct releases!
    Given you posted in the 12" Powerbook G4 forum, note these images:
    the port is a mini-DVI.
    the port labeled "6" is a mini-VGA.
    Use the F7 key to toggle to external display.

  • I replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks

    i replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks

    Hi Eric,
    What message do you get when you try to connect?
    Cheers!

  • TS3682 I backed up my ipad to the cloud as it had a broken screen so I swaped it out for a new one and now I cant restore because the new Ipad has IOS 6 and my back up is 6.1!  This is what I get for buying an Ipad twice in a week because of a broken scre

    I backed up my ipad to the cloud as it had a broken screen so I swaped it out for a new one and now I cant restore because the new Ipad has IOS 6 and my back up is 6.1!  This is what I get for buying an Ipad twice in a week because of a broken screen? $500 the first buy and then another $299 plus tax for the swaped out one that I can't restore with my backup data.

    I assume that you will have to set up as new since it will not let you restore from the backup. Then after you set it up, you can restore from the iCloud backup. The backup should not disappear be use you are setting this device up as new. Your backup should still be in iCloud.
    However, after you activate the iPd and update the software, you will have to erase the device in order to restore from the Cloud backup, that is the only way to get to the iCloud backup.
    Copied from the article that linked you to this discussion ....
    Resolution
    Update your device to the latest version of iOS to be able to restore the backup.

  • Can't connect to my iMac when energy saver is active. Screensaver is okey, but if the screen is blacked out, I cant connect using vnc/teamviewer/logmein. SSH is okey. :(

    Can't connect to my iMac when energy saver is active.
    Screensaver is okey, but if the screen is blacked out, I cant connect using vnc/teamviewer/logmein. SSH is okey.
    Anyone else having this issue? Worked great in snow leopard. Updated to 10.7.1
    //Niklas

    Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

  • HT4113 my i5 screen is broken, i cant get through my passcode to back up my pictures to my computer, can someone help?

    my i5 screen is broken, i cant get through my passcode to back up my pictures to my computer, can someone help?

    Is it that you cant see the screen or you cant use the touchpanel??
    If you have synced with itunes since you set that passcode you should be able to do an itunes backup which will save the photos even without entering the passcode.

  • I just bought an ipod touch 4th gen and cant connect it to tunes i have registered it and downloaded latest itunes it wont pass the connect to itunes screen

    i just bought an ipod touch 4th gen and cant connect it to tunes i have registered it and downloaded latest itunes it wont pass the connect to itunes screen

    Hi..
    Try this support article > Can't connect to the iTunes Store

  • Nokia 2630 with broken screen i need contacts

    i have a broken screen and it is hard to find an attachment to fit to the pc, pescky little thing any way i need to copy the contacts over but i cant see what im doing i can get the blue tooth to work well i can turn it on but how do i connect it to other phone and send it contacts/ or how do i add my contacts to sim card

    I think the ´up´on this answer is for a phone with a 3x3 grid. Does anyone know the key sequence to get into ´contacts´ with a list menu?
    Thanks
    nj15 wrote:
    You will need to exert an effort here (Bluetooth transfers).
    But why don't transfer them to the SIM card memory instead?
    Middle button> Up> Middle button> 7 downs> Middle button> Middle button> Middle button> lastly middle button again. There you go
    Good luck

  • Broken screen but need to enable mass storage mode blind

    Hi there.
    I have a Curve 8900 with a broken screen. I have connected it to Blackberry Desktop Software to get anything I can backed up. It appears to backup all application & organiser things, but wont let me sync music, pictures, or videos.  Troubleshooter suggests that it's because I haven't enabled Mass Storage, but obviously I cant see the screen to see if prompts me to enable it. I have tried connecting my phone and randomly scrolling to see if I can click "yes" to enable it by chance, but it is just as likely that I have clicked "do not ask me again" and then clicked "no" as well.
    Can anyone guide me through the long way of going into settings and changing it manually, bearing in mind that I cannot see what is actually happening? Or does anyone know a way around it?
    Also, my menu was exactly the same as when I originally got it, with no added icons. I seem to remember 'settings' being on the last row but not at the very end. Thanks.
    UPDATE- ok i've worked out how to get into settings, but can someone tell me how to get to Enable Mass Storage mode from there? Like either how many rows to scroll down etc, or if pressing a letter takes me to the correct option, and then where from there?

    Also, my menu was exactly the same as when I originally got it, with no added icons. I seem to remember 'settings' being on the last row but not at the very end. Thanks.
    UPDATE- ok i've worked out how to get into settings, but can someone tell me how to get to Enable Mass Storage mode from there? Like either how many rows to scroll down etc, or if pressing a letter takes me to the correct option, and then where from there?

  • I need to install the HP drivers on a laptop with a broken screen in order to get VGA port to work.

    OS: Windows 7 Home Premium SP1
    Hewlett Packard Model: 2000 2a20ca Notebook
    Oh my god please give me some insight here, it is so hard to find the right answers and I refuse to lose to this technical box that's driving me nuts! So here's the run down:
    My screen broke on laptop...fine. It was connected via HDMI to TV and working fine. Until one day it decided to not turn on. I think due to Windows updates and hubby had no patience so kept restarting
    I tried to reload Windows on it, not thinking about the drivers, and I'm pretty sure I managed to reload Windows. Now I need the drivers to install chipset, networking etc. (which I have a disc for)
    The problem is I cannot see the screen in order to click "install", I can't see the BIOS or the boot sequence. Ugh! And even if I could, the drivers are not installed to use the CD ROM or VGA port.
    I can HEAR Windows start up and turn on! Doo-DO-Doo-DO lol the darn thing is working!
    The monitor works in my other laptop.
    Would/Should the VGA monitor work if I could get it to start in safe mode?
    I've heard of a program that can streamline the driver's into a Windows installation disc so everything is installed altogether but how can I reinstall Windows if the drivers aren't loaded for the CD ROM?
    Is there a way to get the necessary drivers installed? or is this notebook now garbage?

    RocknRoll77 wrote:
    Seriously? 
    1.  The model number is the first thing at the top aside from the OS.
    2.  In my explanation it states:  "I have the drivers on a disk"
    Thanks for all your help!
    Getting the drivers is not the problem.  Getting the drivers installed on a laptop with a broken screen...is the problem.
    Ok, well sometimes you can't use external monitor to see what is happening in some laptops and the only real way to fix this is to fix the broken screen so you can reformat and resinstall the system again. Those are you only options at this point in time.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • My iPhone 5c has a broken screen and won't let me swipe. I got a new iPhone 5c, but want my stuff to backup to it. I haven't backed my old one up in over a year because the storage is full. How would I back it up to iCloud on a Dell or Toshiba computer?

    My iPhone 5c has a broken screen and won't let me swipe. I got a new iPhone 5c, but want my stuff to back up onto it. I haven't backed up my old one in over a year because there's not enough storage. How would I back up on iCloud to a Dell or Toshiba computer?

    Hi Linda Loo Loo,
    If you have backed up previously to iTunes on a specific computer, even if it has been a while, you may be able to still backup even if you are unable enter the passcode on your iPhone due to a damaged screen. You may find the following article helpful:
    If you have previously synced your device with iTunes, you may be able to reset the passcode by restoring the device:
    Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
    If the device is still disabled, or if iTunes does not automatically sync your device, sync the device with iTunes.
    When the backup and sync is complete, restore your device.
    When iOS Setup Assistant asks to set up your device, choose "Restore from iTunes backup".
    Select your device in iTunes and choose the most recent backup of your device.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Regards,
    - Brenden

  • How do I transfer files from my old macbook air with a broken screen to my new macbook air?

    I've got a broken screen on my old macbook air and I can't see ANYTHING AT ALL on it.
    Is there a way so I can connect both computers and copy the files from the old broken one to the new one?
    I've tried to connect on my tv but I couldn't seen anything at all...

    Use Target Disk Mode:
    https://support.apple.com/kb/ht1661
    Ciao.

Maybe you are looking for

  • How do I add a poster to a page curl/turn PDF in InDesign 2014?

    I have created a two-page Christmas card for my company. I used the Adobe TV video to see how to create a SWF file with page curl to import into an InDesign file and keep page turn in a PDF. The only problem is that I can't find how to use the first

  • How to capture the data from a JSP form

    Hi I have a JSP form, My task is to capture the data from a JSP and submit to Data Base. for example I have the field like Enter Table name to be created in data base: The table name is to be captured by a servlet and by that table name, table should

  • Updating table from right side of shuttle

    I have a situation where I have a many to many relationship with 2 tables and an intermediate table. I am trying to create a shuttle item to be able to bring the two tables together. I have been reading the posts regarding populating the right side o

  • TS1702 iPad won't power off - dialogue box won't disappear

    Hi, there is a dialogue box saying 'Your rental movie has expired' and it's asking me to press ok.  I press ok but nothing happens.  Nothing else works because the dialogue box just stays there.  Troubleshooting recommends to power of the iPad, but i

  • How to interrupt MDB processing

    Hi We have a problem with web service call from MDB. Due to some network problems the call can hang for 30 minutes and any no way of setting timeout on JAX-WS port nor sun.net works. Whats more there is a silent transaction timeout on JTA (with no ex