BROKEN SCREEN "CLIP" SCREEN NOT VISIBLE

I have just been given a Portege 7200 series with docking station. The clip which fastens the screen to the main unit is broken and the screen doesn't seem to work. Whilst I can cope with the broken clip, I wondered if this is affecting why the screen isn't working? I can only see a very very dim image. Obviously I use an external screen but wondered if there was anything I could do to make the laptop screen work again. Thanks for any help.

Hi
I am pretty sure that some hardware component is defect. It can be FL inverter or something like that. In my opinion you should contact Service Partner and let them exchange it. Portege 7200 is very nice notebook.
In my opinion it is worthwhile to change it.

Similar Messages

  • VST edit screen not visible after a certain number in a session

    Hi folks, I have a small strange problem. After I add a certain number of VSTs to a project, I can't see the GUI of the VST anymore. It's there, and working, but I can't edit any parameters because I can't see them anymore. Anyone with this problem and why it happens?
    It seems to be worst with new Waves plugins (I have Gold bundle) but it's general with any VST. Strangely, it doesn't happen with DirectX plugins at all.
    Lenovo laptop, i5, using firepod.

    The main screen is scrollable. The sub screen does not need to be. The box frame has been expanded to allow space for the new objects and the entire new space is visable. Only the objects located in the lower portion of the box are not visible.

  • Screen not visible

    Screen flashes, remote client window is listed (in WIndow Menu), but not visible.   It is as if it is off-screen somewhere.  Any ideas?  I have tried deleteing from the all computer list and reconnecting with no luck.  Unfortunately it is a co-located Mini in a secure location - I can't easily get to it to put a real monitor on it.

    I was able to see the log and these are the entries after I ran the kickstart routine.  Is there anything unusual in there?.:
    savantadev:admin admin$ tail -f /var/log/secure.log
    Feb  2 13:57:15 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[88972]: Authentication: SUCCEEDED :: User Name: pcottrell :: Viewer Address: xxx.xxx.xxx.xxx :: Type: DH
    Feb  2 14:19:47 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[88972]: Authentication: SUCCEEDED :: User Name: admin :: Viewer Address: xxx.xxx.xxx.xxx :: Type: DH
    Feb  2 15:47:20 savantadev sshd[91196]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
    Feb  2 15:47:25 savantadev sshd[91194]: Accepted keyboard-interactive/pam for admin from xxx.xxx.xxx.xxx port 55603 ssh2
    Feb  2 15:47:25 savantadev com.apple.SecurityServer[46]: Session 0x2f394d created
    Feb  2 15:47:25 savantadev com.apple.SecurityServer[46]: Session 0x2f394d attributes 0x20
    Feb  2 15:57:10 savantadev com.apple.SecurityServer[46]: Session 0x2f04f4 dead
    Feb  2 15:57:10 savantadev com.apple.SecurityServer[46]: Killing auth hosts
    Feb  2 15:57:10 savantadev com.apple.SecurityServer[46]: Session 0x2f04f4 destroyed
    Feb  2 16:01:58 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[91468]: Authentication: SUCCEEDED :: User Name: pcottrell :: Viewer Address: xxx.xxx.xxx.xxx:: Type: DH

  • Broken screen, not able to log in, need to do system restore

    1. Pavilion dv6500 laptop with broken screen.
    2. Operating system: Vista
    3.Error message: "The User Profile Service service failed the logon. User profile cannot be loaded"
    4. Microsoft updates?
    I need to know (a) the key stokes required to carry out a system restore to a saved restore point and (b) the key strokes to carry out a hp system recovery without being able to see the screen.
    I need this to try to retrieve the data I have on a laptop with a broken screen and vga port. I have been using an HDMI cable to connect it to a monitor but recently, vista stopped allowing me to log into my user account (giving the error above). To fix this I would use safe mode to modify my registry but safe mode does not project through the HDMI port to the external screen.
    Therefore, I would like to know (a) the key strokes required to restore to a saved restore point and (b) the key strokes to carry out a hp system recovery without being able to see the screen or use the mouse.
    Thanks.

    Simplest solution to retrieve data under those circumstances to me would be to remove your HDD
    Plug it into another computer by eSata
    Then just copy whatever you wanted onto the other HDD.
    If my reply was helpful please click the "Kudos" star.
    If your problem is solved please click the "Accept as Solution" button

  • Broken screen, not cracked glass on Xperia Z2

    Sounds like a GPU issue (Graphics chip) so I'm sorry to hear this but you would need to either return your device to the place of purchase or contact Xperia care and have your device inspected http://www.sonymobile.com/global-en/support/contact-us/

    Yesterday I was driving my car to pick up a friend. When I picked up the Xperia Z2 to call him, the screen was broken. The glass hasn't cracked, but the screen is shiowing lines of different colors, and it's only getting worse. It is hard to read texts now. I didn't drop the phone on the floor, my pockets were not tight, and i can't understand why it's broken. I've had this phone only since Feburary. Does this go under the warranty? 

  • Caller screen not visible, mixed up screens on iphone

    when my phone is not in use, often times there will be two screens visible at once. for example, the ipod control will be visible on my wallpaper when i'm not even using the ipod.
    also, the screen doesn't always come up when someone is calling me.

    Is this what you are seeing?
    http://i38.tinypic.com/2qtwmtc.jpg
    *That is a screen shot of iPod Control while iPhone is locked. It is typically activated when you double click the home button. It can make the controls re-appear and disappear.
    Have you tried rebooting iPhone at all since this started?
    Hold down home button - & Sleep/Wake button together. Let go once you see a silver apple logo.

  • Icon display in Module pool screen not visible to some users

    Hi,
    I have added an icon in one of the module pool screen with dynamic quick info.  The page is rendered fine and the info is also displayed well for most users except some.  I can't figure out why the icon is not being displayed for some users.
    Do someone has any solution for this?
    Thanks,
    Sumith

    As I recall, the icons are actually stored in a file on each PC so some users may have a corrupted or out-of-date file with the icons.  You can look for posting on "how to add an icon" to see a discussion on this topic.
    I found some useful info at:
    Create and Add Icons to table ICON?
    Message was edited by: Charles Folwell

  • Supplier screening not visible

    Hi
    We are having SRM 4.0 with SUS installed.
    1. In SICF under BSP-->SAP there are 2 services self registration. <b>Ros_self_reg</b> and <b>Srmsus_selfreg</b>.
    Which one we should configure for supplier self registration.
    We have configured ROS_SELF_REG for supplier self registration. Is this correct? If so what is the significance of SRMSUS_SELFREG.
    2. There is no "Supplier Screening" entry in the Menu tab for the role SAP_BBP_STAL_PURCHASER or SAP_EC_BBP_ST_PURCHASER in PFCG. How to get that entry in the role.
    Because of this I am not able to see "Supplier Screening" link with purchaser's role in EBP web application and not able to see the suppliers who are registered through self registration page.
    Please provide the solution for the above.
    Thanks in advance.
    Jagdish

    Hello Jagdish,
    1) This is since SRM 4.0, where we replaced Java based SUS WPS with BSP.
    One should be for SUS only, and the other one for SRM ???
    2) Here is a copy of online help. You must adapt the role with this BSP link:
    Prerequisites
    Supplier Screening with SRM Server
    You have at least one of the following roles:
    ·         Purchasing assistant
    ·         Professional purchaser
    ·         Operational purchaser
    ·         Strategic purchaser
    The Preselect Vendors transaction is delivered with the single roles. In order to use the transaction, you must enter the URL for supplier screening in the single role. Then you must update and activate the composite role.
    Supplier Screening with ERP
    You have logged onto the supplier registration system with the role SAP_EC_SUS_ROS_ PROCESSOR.
    Rgds
    Christophe

  • Requirement screen not visible

    Hi Experts,
    I have  one problem.  below is the details.
    In tcode PIQST00. after entering the student number and click on Audit details.The screen Admission  Editing is displayed. but the  requirement subscreen area is not displaying the data. 
    could you please let me know what has to be done
    Thanks in Advance
    Regards
    Santosh Kumaar.M

    Hi Sudhir,
    Thanks for the reply.
    I already assigned requirement profile template to program of study.  I'm able to see requirement filed in student file but empty without any requirement and checkbox. Did all the settings as per audit cookbook.
    The parent table PIQDBAUDF is having the AUDF_ID(Requirement Profile Identifier (ID)). but  not inserting the same value in
    1) PIQDBAUDF_STRU1 ( Requirements of Requirement Profiles)
    2) PIQDBAUDF_STRU2 ( Subrequirements of Requirement Profiles).
    Could you please let me know where we are going wrong with settings/configuration or do we need to implement any OSS Note.  if so please do let us know.
    Thank you in advance.
    Regards
    Santosh Kumaar.M

  • Netpoint License Activation screen not visible

    I am trying to install Netpoint for the first time on a demo system.  My Netpoint website, however, does not show the License Activation screen.  Without that, my license cannot be validated and I am completely stuck.  All of the steps in the instructions have been followed.  Has anyone seen this behavior before?  Thank you in advance.  Note: the Netpoint DB, with superuser, has been created successfully, the web.config looks good, the permissions are all in place, etc.

    I am using the "OEC 4" theme, so I am seeing the normal home page for that theme, but there is no "license activation" message/section at the bottom.  Just the standard home page.
    I installed Webtools 5.9
    I got the installation docs (Netpoint 5.9 Installer.doc) at the same time I downloaded the software from the SAP  Site.
    The installer .msi file is named 592netpointinstaller.msi.  When I installed it, the installer said that my local version needed updating.  I pressed the "download files" button, and upgraded to 5.9.6.  However, the red letters at the bottom of the installer screen continued to say "New Installer Available to Download".  But it seems that the 592netpointinstaller.msi is the latest version, correct?

  • Menu bar at upper left of screen not visible

    I have lost the menu bar that appears in the upper left corner of the screen ("File", "Edit", "View", etc., as well as the back/forward arrows). I restored it on Internet Explorer -- how do I restore it on Firefox?
    == This happened ==
    Every time Firefox opened
    == I tried (finally successfuly) to get rid of AOL

    Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark.

  • Reminders screen not visible

    I'm running OSX mavericks.
    when I open reminders app, there is no window, nothing.  if I uncheck reminders in the system preferences (icloud), it comes back, but blank.  If I put in a reminder then (keeping reminders open) re-check the reminders box in system preferences, the icloud reminders show up.  but when I close the reminders app, it's just like before.
    reminders is working OK on other (iOS and mac) devices, and the reminders I created on the broken mac show up after I've re-checked the icloud reminders box (they get merged into the icloud reminders then synced to the cloud).
    This is vexing, it happened to me before with my other mac, and I have no memory of what I did to fix it.
    I tried repairing permissions, I tried reboots, I tried resetting the pram (or whatever it's called - option/apple/p/r during boot).

    I was able to see the log and these are the entries after I ran the kickstart routine.  Is there anything unusual in there?.:
    savantadev:admin admin$ tail -f /var/log/secure.log
    Feb  2 13:57:15 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[88972]: Authentication: SUCCEEDED :: User Name: pcottrell :: Viewer Address: xxx.xxx.xxx.xxx :: Type: DH
    Feb  2 14:19:47 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[88972]: Authentication: SUCCEEDED :: User Name: admin :: Viewer Address: xxx.xxx.xxx.xxx :: Type: DH
    Feb  2 15:47:20 savantadev sshd[91196]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
    Feb  2 15:47:25 savantadev sshd[91194]: Accepted keyboard-interactive/pam for admin from xxx.xxx.xxx.xxx port 55603 ssh2
    Feb  2 15:47:25 savantadev com.apple.SecurityServer[46]: Session 0x2f394d created
    Feb  2 15:47:25 savantadev com.apple.SecurityServer[46]: Session 0x2f394d attributes 0x20
    Feb  2 15:57:10 savantadev com.apple.SecurityServer[46]: Session 0x2f04f4 dead
    Feb  2 15:57:10 savantadev com.apple.SecurityServer[46]: Killing auth hosts
    Feb  2 15:57:10 savantadev com.apple.SecurityServer[46]: Session 0x2f04f4 destroyed
    Feb  2 16:01:58 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[91468]: Authentication: SUCCEEDED :: User Name: pcottrell :: Viewer Address: xxx.xxx.xxx.xxx:: Type: DH

  • After Effects are not visible when exporting in Adobe Premiere Pro CS4

    I have made a simple name/title bar for an interview video, using Adobe After Effects. When i import the composition to Premiere Pro it's visible in the preview window BUT; when I render the video in Premiere Pro the After Effects clip is not visible anymore. AND  when i export the complete sequence to a .wmv file, the After Effects clip is not visible either.
    I'm not that much of an expert in Premiere Pro or After Effetcs, so hopefully this can easily be solved.
    What is it that i'm doing wrong?
    Thanks in advance!

    The names are the same, but the programs are very different... CS4 is 32bit, CS5 and later is completely rewritten to be 64bit
    So, there is a different forum for CS4 and earlier http://forums.adobe.com/community/premiere/premierepro_previous?view=all

  • After Effects are not visible when exporting in Adobe PP CS4

    Hi all of you experts!
    I have made a simple name/title bar for an interview video, using Adobe After Effects. When i import the composition to Premiere Pro it's visible in the preview window BUT; when I render the video in Premiere Pro the After Effects clip is not visible anymore. AND  when i export the complete sequence to a .wmv file, the After Effects clip is not visible either.
    I'm not that much of an expert in Premiere Pro or After Effetcs, so hopefully this can easily be solved.
    What is it that i'm doing wrong?
    Thanks in advance!

    Thanks for your reply!
    Is there any specific firmat i should export as? I have only tried as a *.AE file (which does not show on the final video) and as a *.MP4 file (whick does not have a transparent background - so i cannot use this)

  • Why is the placeholder Q&A for multiple choice not visible on screen?

    After inserting 6 Multiple choice quiz slides in Captivate 7, the placeholder Q&A text is not visible, so there's no way for me to modify them with my Q&A's. However, they are visble in Preview mode. Any suggestions?
    This is happeneing in a project that someone else created & I am editing. I made a new version & copy/pasted the quiz slides into a new file. Ever since then I've had this problem. When I open the original file, it's now doing the same thing there as well. What gives??
    Below is what I'm seeing. If you look at the slides on the filmstrip on the left, you can see that there is nothing there, however in the Preview, you can see the placeholder text.

    Hi Rod & Lily! Thanks so much for replying.
    OK - the screen shot below is what I see when I am in edit mode. Completly blank except for the "Multiple Choice" heading at the top. I've highlighted in red on the Properties & Filmstrip, which Master slide I'm using. Hopefully you can see that on the Master Slide the placeholder text is there, but not in the edit view.
    Lily - below is a screen shot of the Quiz Properties. Hopefully you can see it.

Maybe you are looking for