Broken screen, not able to log in, need to do system restore

1. Pavilion dv6500 laptop with broken screen.
2. Operating system: Vista
3.Error message: "The User Profile Service service failed the logon. User profile cannot be loaded"
4. Microsoft updates?
I need to know (a) the key stokes required to carry out a system restore to a saved restore point and (b) the key strokes to carry out a hp system recovery without being able to see the screen.
I need this to try to retrieve the data I have on a laptop with a broken screen and vga port. I have been using an HDMI cable to connect it to a monitor but recently, vista stopped allowing me to log into my user account (giving the error above). To fix this I would use safe mode to modify my registry but safe mode does not project through the HDMI port to the external screen.
Therefore, I would like to know (a) the key strokes required to restore to a saved restore point and (b) the key strokes to carry out a hp system recovery without being able to see the screen or use the mouse.
Thanks.

Simplest solution to retrieve data under those circumstances to me would be to remove your HDD
Plug it into another computer by eSata
Then just copy whatever you wanted onto the other HDD.
If my reply was helpful please click the "Kudos" star.
If your problem is solved please click the "Accept as Solution" button

Similar Messages

  • Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

                      Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

    Take each of the following steps that you haven't already tried.
    1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
    2. From the menu bar, select
     ▹ System Preferences ▹ Sound ▹ Output
    Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
    3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
    5. Reset the NVRAM.
    6. Reset the SMC.
    7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
    8. Make a "Genius" appointment at an Apple Store.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
    *An SSD doesn't need to be zeroed.

  • Very URGENT:am not able to log in to my account on installation of OSX lion...tried to resolve this issue by calling apple support centre ,but was left in vain...am not able to access my documents nor do any work...plz help me resolve this issue asap...

    am not able to log in to my user account after installation of OSXLion,have called up the support centre many times,but was left in vain ...i belief its a simple problem ,but why is apple support center not able to help me out ...have given them all the required information with respect to everything...somebody plz help me to log in as am not able to access my docs and do any work...

    My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
    This is entirely a carrier issue.  If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
    i feel i need to change my brand
    This is a user-to-user tech support forum, not Apple.  No one here cares at all about your threats.
    NEVER post personal info in this public forum

  • Not able to log into (IR,ID,SLD,RWB) j2EE Engine.

    Dear Experts,
    We have SAP PI 7.0 installed in our landscape. Clients 110 and 100 are created. User ABCD is created in 110 with all (SAP_XI, SAP_SLD, SAP_BC_AI* and SAP_NEW, SAP_ALL) privileges.
    I am able to log into 110 with user ABCD. But, I am not able to log into IR, ID, SLD and RWB. I think PI 7.0 by default will be installed on client 001 and later we need to do some settings to make it point to client 110.
    Can you please provide me some notes/blogs/links to solve this issue? Thanks in Advance.

    Hi PhaniKumar,
    Read below sap note.
    for SAP NetWeaver 7.0
    Note 940309 - Change PI default client after NW 7.0 Installation
    For SAP NetWeaver for PI 7.10
    Note 1115280 - Running SAP NW for PI in a different client
    Regards
    Ashok
    Edited by: Ashok Dalai on Nov 4, 2008 7:34 AM

  • I am not able to log in to ePrint

    I am not able to log in to ePrint, after entering the username and password a new window pops out, advising to click on HP Connected. After clicking on the button I get error 404, web page not found.
    Also not of the 5 apps that are installed on the printer not working, selecting them I see apps updating .... please wait and then cancelling.
    Anybody can help ?
    Thank you
    This question was solved.
    View Solution.

    Hi hp323,
    Welcome to the HP Support forums.  I understand that you are unable to get the apps to work on your Photosmart 7520 series printer and that you are unable to log into HP Connected.
    HP Connected has only been rolled out to the USA and the UK.  Please try logging into HP's ePrintCenter with a country other than the USA or UK as the your country choice (this can be chosen in the lower left hand corner of the screen, please see the screen shot below).  That will stop the redirection to HP Connected.  What is occurring is you are trying to log into the USA/UK ePrintCenter which automatically redirects.  The redirect is using the country from the computer and is trying to redirect to the HP Connected for your country and it fails as there is not an HP Connected for your country.
    As for the apps,  HP is aware of the issue and is working on a solution. It is recommended that you have your product updates set to automatic on the front panel of the printer in order to be able to receive the update when it becomes available. If you wish to discuss this with a phone support agent, please call HP's Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside of the USA/Canada region please click the link below to find the Technical Support number for your country/region.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • I'm not able to log in as J2EE_ADMIN through the Web Browser.

    If I try to log into the server using http://<server>:50000/ I get the SAP Nteweaver SAP Web Application screen. I click on System Information, I get prompted for the username and password. I enter the username J2EE_ADMIN and then the password, but it keep asking for the username and password until I get the 401 unauthorized screen. I can log into Visual Administrator using the J2EE_ADMIN and the same password with no problems.
    I activated the sap* account, but the same thing is happenning, I'm not able to log in as sap*!
    Any suggestions or tips?

    In the Security Provider Service choose Runtime --> Policy Configurations -->Authentication tab, please check whether you have the below settings correctly, if not set as below.
    Login Modules                                              Flag
    EvaluateTicketLoginModule                           SUFFICIENT
    BasicPasswordLoginModule                          REQUISITE
    CreateTicketLoginModule                              OPTIONAL
    Thank you,
    Shyam

  • Not able to log in Portal(irj or nwa). MYSAPSSO2???

    Hello,
    When i try to log in portal(irj or nwa), the application always redirect-me to log in screen again. So, i try to log in with another user, the message "The user was has authenticated with another user.".
    I verified and the MYSAPSSO2 cookie was not created. I think because of this i not able to login in Portal.
    When i run a service through SICF, it open correctly in Internet Explorer and the MYSAPSSO2 cookie is created. If i try to open the Portal in another TAB, it open correctly.
    Why the MYSAPSSO2 cookie is not created when i log in from portal.
    Recently we changed the SSO Ticket Log in configuration. But we returned to default configuration and we are not able to log in Portal.
    How to fix it?
    Thanks.
    João Mariano

    The problem was in the Template security.
    Thanks

  • User not able to Log in

    Hi All,
    In Entrprise Portal if an End user is not able to log in with his user id or his login is failed , then as a Portal Administrator what we need to check or can anybody tell me where the problem might be .
    Thanks a lot .

    Hi Jain,
    As they said above, first check the user ID in UME.  If the user exists, check if it is locked. 
    To unlock the user , select the user and click on unlock tab.  a message "object unlocked successfully" will display.
    To reset the password for the particular user,
    1) goto user administration --> identity management --> search for the user ID --> click on the Id which is displayed below.
    2)  click on modify tab
    3)  select define initial password button and type password in define password & confirm password fields
    4)  save the changes
    hope this helps you. pls reward points if it is helpful
    regards,
    vv.

  • I am not able to log-in to web sites (banking, g-mail, etc.)

    Using firefox, I am not able to log in to accounts that I have had access to for years. I have been using Firefox for a few years with no problem up until recently. I've tried deleting cookies and history but I am not able to log into an account once I lose it. (as long as I have an account open, there is no problem

    Hi hp323,
    Welcome to the HP Support forums.  I understand that you are unable to get the apps to work on your Photosmart 7520 series printer and that you are unable to log into HP Connected.
    HP Connected has only been rolled out to the USA and the UK.  Please try logging into HP's ePrintCenter with a country other than the USA or UK as the your country choice (this can be chosen in the lower left hand corner of the screen, please see the screen shot below).  That will stop the redirection to HP Connected.  What is occurring is you are trying to log into the USA/UK ePrintCenter which automatically redirects.  The redirect is using the country from the computer and is trying to redirect to the HP Connected for your country and it fails as there is not an HP Connected for your country.
    As for the apps,  HP is aware of the issue and is working on a solution. It is recommended that you have your product updates set to automatic on the front panel of the printer in order to be able to receive the update when it becomes available. If you wish to discuss this with a phone support agent, please call HP's Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside of the USA/Canada region please click the link below to find the Technical Support number for your country/region.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Can not able to log in into sys as sysdba

    Hi all,
    I have one instance name is skydb and once upon a time i used it when i created it.i did set one password for the sys user and created password file.but right now i have forgot the password of sys.again creating the password file using below command.
    orapwd file=orapwdskydb password=oracle entries=10but can not able to log in into sys as sysdba using this 'oracle' password .
    for your information now the database is down.we also need to up it.
    please help.
    thanks a lot in advance.
    atanu

    Hi All,
    first of all thaks a lot for your promt reply.now for your information my os info is
    Linux oracleDB11g 2.6.32-71.el6.i686 #1 SMP Fri Nov 12 04:17:17 GMT 2010 i686 i686 i386 GNU/Linuxmy account user is in DBA group and its confirm.
    now am giving the output of the
    each command
    [oracle@oracleDB11g admin]$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Wed Jan 23 11:04:25 2013
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    ERROR:
    ORA-01031: insufficient privileges and
    [oracle@oracleDB11g admin]$ sqlplus /nolog
    SQL*Plus: Release 11.2.0.1.0 Production on Wed Jan 23 11:05:59 2013
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    SQL> connect / as sysdba
    ERROR:
    ORA-01031: insufficient privilegesalso want to tell you I have created that password file on location is
    /oracle/app/oracle/product/11.2.0/dbhome_1/dbsthanks once again
    atanu

  • Newly created users are not able to log in through WEBGUI in SRM system

    Hi All,
    I have created new roles in the SRM system with  the BP tanscation codes Like( BBPSC01
    BBPSC02
    BBPSC03
    BBPSC04)
    after that I have created new users and I have assigned these roles to users. Users are able to login throgh SAP GUI but Users are not able to log in WEB GUI..  Once they providing user id and password in web gui. they are facing issue.
    For web login do we need to maintain any special settings in SRM system?
    Please suggest me.
    Thanks in advance.
    Regards,
    Siva

    Hi,
    Here is the error when user is giving user id and pwd.
    Note
    The following error text was processed in the system DN0 : Error message occurred.
    The error occurred on the application server dm2serv_DN0_01 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    SYSTEM-EXIT of program SAPMSYST
    Regards,
    Siva

  • Please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store

    please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store

    Ok, you should generally only get this when you are converting your ID to an iTS account for the first time.
    Sign into iTunes with your Apple ID and you should get this.... IRC once you agree or accept it's now an iTS account and you wont get that again.

  • Not able to log into Verizon Cloud on Galaxy Note Pro 12.2

    Not able to log into Verizon Cloud getting a message that my phone number has changed and that I should factory data reset the device and then restart to setup my cloud account. I have not changed numbers and don't want to factory data reset.
    Any Ideas?
    Thanks

        That is really odd, ThePathfinder. I too would be a bit weary of doing that, but the factory reset isn't as bad as it used to be. Let's try this step first before even considering that route. If you go to Settings > App Manager > All Verizon Cloud > Can you clear the apps cache and data, and possibly uninstall any updates for it? This may be enough to clear past info stored for the app, and may allow you to sign in with no issues.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • Not able to log on to the system

    Hi,
    I have just added an systen to central monitoring in SOLMAN, but am not able able to log on to the monitored system on double clicking in rz20.
    RFC's are working fine, alerst are being generated, CCMS agent is working, everything else also seems to be fine.
    Please suggest.

    @Javed : RFCs are working fine. Connection, authorisation test evrything is fine.
    @Juan : Find below the sm21 output
    Time     Type Nr Clt User   TCode Grp N Text
    10:19:10 RD          SAPSYS       Q0  I Operating system call connect failed (error no. 239 )
    Operating system call connect failed (error no. 239 )
    Details
    Recording at local and central time........................ 20.05.2011 10:19:10
    Task...... Process User...... Terminal Session TCode Program Cl Problem cl         Package
    15209      Gateway SAPSYS                                    K  SAP Web AS Problem STSK
    Further details for this message type
    Module nam Line Error text        Caller.... Reason/cal
    nixxi.cp   2835        connect239 NiPConn    connect
    Documentation for system log message Q0 I :
    The specified operating system call was returned with an error.
    For communication calls (receive, send, etc) often the cause of errors
    are network problems.
    It could also be a configuration problem at operating system level.
    (file cannot be opened, no space in the file system etc.).
    Additional specifications for error number 239
    Name for errno number ECONNREFUSED
    Interprocess communication (e.g. TCP/IP) connection refused by partner.
    This usually means that the necessary receiver program is not running.
    Technical details
    File Offset RecFm System log type             Grp N variable message data
    3536 428220 m     Error (Function,Module,Row) Q0  I        connect239                     NiPConnconnectnixxi.cp2835
    Edited by: Chilbul on Jul 5, 2011 3:59 PM

  • Not able to log-on workspace/shared services after new inst thru index.jsp

    Dear Specialist Team,
    I m Kalyan, new to HFM product installation. I have completed successful EPM installation with the help of user guides from Oracle.
    Installed on my local machine, able to work on Planning / Essbase Admin server, but not able to log-on to workspace and shared services on the local host link.
    Checked many things like Services running properly, Diagnostics report. All are positive. Using IIS 7.
    I m able to see this link "*http://localhost:9000/workspace*/", when I click on the Launch Application a blank window gets opened on Popup and nothing is visible it says loading for long time on this link "*localhost:9000/workspace/index.jsp*".
    Tried using different browsers, but unlucky. Is there anything I m missing with java or browser or something else?
    Please help me to sort this, so that I can log-on and proceed with application usage.
    Regards,
    Kalyan

    John's support document related to the browser settings is the best, however if you do not have access to support document or are using Firefox you can try installing an add on found at -->
    https://addons.mozilla.org/en-US/firefox/addon/remote-xul-manager/
    and restart Firefox...
    Once the browser is restarted..you can find the add on at Firefox --> Web Developer --> Remote XUL Manager
    Add the URL, that you are using to access workspace and try to load it. If everything is good, you should be able to see workspace/shared service page.
    Thanks.
    hyperionEPM
    Please mark answers as helpful or correct for others to find them easily

Maybe you are looking for