Broken Speaker on 8900 HELP!!

I just bought by 8900 from a t-mobile retailer. Unfortunally I, by accident, dropped my phone on my bowl of cereal and it became submerged in MILK!!!..... anyways.. everything works fine on the phone no damage on the lcd.. all keys work... except my speaker.. I can make calls but i cannot hear the other person. I'm currently using my bluetooth headset to make calls...
I took the phone to tmobile unfortunally warranty is void due to "water" damage.. (or milk too) So given that I can repair the phone myself I have looked online and am trying to find a new speaker for my phone. Does anyone know where i can get one?
or at least lead me to a broken blackberry that i can use for spare parts... thanks in advance

Try HorizonWireless in my signature below, for the parts you need.
They are reputable people, and can help you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Ipod touch icons/pictograms won't open by touching, only a voice speaking. can someone help please?

ipod touch icons/pictograms won't open by touching, only a voice speaking. can someone help please

Connect the iPod to your computer (USB or wifi) and turn VO off via iTunes. See:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

HT4623 my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

HT1212 Right, home button broken, locked out. Help... i need to access the recovery mode

Right, home button broken, locked out. Help... i need to access the recovery mode

Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella

HT4623 Hi my i phone 5's front screen is broken so can you help me that .

Hi
my i phone 5's front screen is broken so can you help me that

There are many authorized repair centers around. You could take your iPhone there (it won't be cheap). You could also attempt to repair it yourself, following a few YouTube videos on how to do so. (there's a risk).
Personally, if you have cash, I'd go to a repair center.

HELP :( broken speaker

i recently dropped my ipod touch 4th gen into some milk and it all works fine still except the external speaker will not work. I wonder if ther is anything i can do or will it not work again. Please help me thanks

Try HorizonWireless in my signature below, for the parts you need.
They are reputable people, and can help you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I upgraded my ipad 2 to ios 5.1 and it no longer recognizes or plays through my speaker dock. Help!

I just upgraded my ipad 2 to ios 5.1 and it no longer recognizes or plays through my speaker dock.
I have tried:
- multiple soft and hard resets (including various sequences published on this site... no luck)
- reseting the ipad settings (location, wifi, etc)
- 2 complete system wipe-out and restore cycles
- changing every setting I can think of
I still have normal sound from the device when it is not docked. When docked, my device still charges and it clearly recognizes it is plugged into something (as the volume slider will no longer function with the side keys while docked) but it won't play and eventually it gives me a message that says "accessory not supported by ipad." This speaker dock is designed specifically for ipad (brookstone idesign boombox) and worked flawlessly until 2 days ago when I installed the ios 5.1 update.
Please help!

Not quite the same problem but my speaker dock no longer charges iPad1 and iPhone4 since upgrading to iOS5.1 but was playing and charging only the day before, extremely annoying as I have only had the dock about 3 weeks now.
I haven't tried my iPad3 yet, but will assume that it will do the same

I upgrade my iph4 to ios 7.1.2 and the microphone is not working on video camera, is not working anymor also the microfon on speaker mode, please help me

Hy guys, i upgrade my ios 7.1.1 to 7.1.2 and now iths not working anymore my microphone on video record, the camera is working , is recording but without sound, and also the microphone on speaker, when i activat the speaker the microphon is not working. I do a full reset on my iph but still not working , also my girlfriend have same problem.Please help me, thx.

To rule out a software issue, try to set it up as new device, without using the latest backup, explained in this article:
How to back up your data and set up as a new device
If this does not help, the problem might be hardware related and the phone needs to be serviced by Apple or an Authorized Apple Service Provider:
iPhone - Contact Support - Apple Support

Headphone jack broken off inside Macbook--HELP!

My dad recently gave me his MacBook Pro, only problem is the audio is completely broken. This occurred when the computer was on the bed with headphones were plugged into the headphone port, and the dog jumped on the headphone jack, breaking it off inside of the computer.... The piece is totally irretrievable; it's broken off far inside of the headphone port. My father contacted the Apple store and I contacted Mac Mall, and they both said the same thing--it will have to be taken apart, and could cost up to $900 to fix!!!
This is a huge expense that I would like to avoid if possible..... my question is, is there any way to get around this problem? Is there any way I can get audio without having the computer taken apart to get the broken headphone piece out? Are there perhaps external speakers that work through the USB port? Or is there a way to change the settings so the computer doesn't acknowledge that there is something plugged in the headphone port? I really don't know! I'm totally desperate. Anything helps. Thanks!

Yes, easy way around it.
look up a JEWELRY REPAIR place, usually they charge $30 or $40
they drill into the back of the jack, then insert a mini jewelers screw and yank it out. Ive done it myself for a customer long ago.
Many jewelry repair people do such things.

None of the support people speak CF, please help!

I'm about to write a web service web app. for the 2nd time. I'm new to this but my first app. was a success so I plan to do it again.
In both cases, the web services weren't written with CF. Not sure what language they used but this shouldn't be a problem as far as I understand because I'm just consuming and CF should be able to do that.
This time I'm facing an address manipulation software called QAS. This software should be able to do some formating to the input address. For example, if we pass in an address with a mix of lower and uppper case street name, without state and 5 digits zip, after being processed by this software, we'll get a nice formatted address back as a result where the first letter of the street name is capitalized, added the city, state and 9 digits zip with a dash in between. That's briefly what this software can do (it can do more than this but since this software is already there and has this capability, I'm going to use this particular functionality without having to re-invent the wheel).
In Production env., we should install this software in prod. web server but in dev. stage I can install the software in my local machine, as it is written in its manual. The url to the wsdl file when it is installed in local machine is referred to as http://localhost:2021/Proweb.wsdl The 2021 is the port where this software is installed. I open up in the browser and I can see the wsdl file display nicely.
Now the problem is, I'm using cfinvoke to invoke this web service as I did in the pass but I got error saying :Web service operation DoBulkSearch with parameters {DoSearch={3300 metzerott rd | adelphi | maryland | 20783},Country={Structure},Engine={Structure},Layout={Database layout}} cannot be found.
I communicated to the support, even they're helpful but since they don't speak ColdFusion they're not that helpful to me. My last question to them was asking them to comment on my approach, in a plain english, if the steps I currently use is wrong. Here is my question to them:
1.       I’m trying to consume (invoke) a web service and reference the WSDL file through http://localhost;2021/Proweb.wsdl
2.       The method that I’m using to invoke this web service is called: DoBulkSearch
3.       I also pass a few parameters when invoking this web service and they are:
·         Country, which has a value = USA
·         Engine , which has a value = Verification
·         Layout , which has a value = Database layout
·         Search, which has a value = 1 riverside rd|new york|ny|blank zip
4.       The end result expected from calling this web service is a formatted address, which steps from this is/are considered in correct. Please
         advice
This is their answer:
        Engine has to be the structure defined in the wsdl, Verification alone is not enough of a value to pass to it. I don’t know how to pass the
        structure in coldfusion though.
        Search has to be a structure as well. If you were to use the DoSearch method, then this string would be enough to pass, it might be easier to
       start with this method.
In ColdFusion, I tried a couple of approach but unfortunately both are not working and gave the same error:
<cfinvoke webservice="http://localhost:2021/proweb.wsdl" method="DoBulkSearch" returnvariable="retVal">
<cfinvokeargument name="Country" value="USA">
<cfinvokeargument name="Engine" value="Verification">
<cfinvokeargument name="Layout" value="Database layout">
<cfinvokeargument name="Search" value="3223 st. paul street | | | 21218">
</cfinvoke> <cfdump var="#retVal#">
My Question is:
How can I pass Country, Engine, Search parameters and tell the remote site that these are structure paramater. In cfinvokeargument there is no "Type" attribute where I can write Type= "Structure"
OR this one is also not working:
Post / HTTP.1.0
Content-Type:text/xml
Content-Length:614
SOAPAction: "http://www.qas.com/web-2007-08/DoBulkSearch"
<?xml version="1.0" encoding="utf-8"?><cfsavecontent variable="soap">
<cfoutput>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<qas:QABulkSearch xmlns:qas="http://www.qas.com/web-2007-08">
<qas:Country>USA</qas:Country>
<qas:Layout>Database layout</qas:Layout>
<qas:Engine Flatten="1" PromptSet="Default" Intensity="Close">Verification</qas:Engine>
<qas:BulkSearchTerm>
<qas:Search>3223 st. paul street | | | 21218</qas:Search>
</qas:BulkSearchTerm>
</qas:QABulkSearch>
</soapenv:Body>
</soapenv:Envelope>
</cfoutput>
</cfsavecontent> <cfhttp url="http://localhost:2021/proweb.wsdl/" method="post">
<cfhttpparam type="xml" name="DoBulkSearch" value="#trim(soap)#">
</cfhttp> <cfdump var="#soap#">
(screen shot of the wsdl file in text file)

You pass a structure as a parameter to a web service by making a ColdFusion structure and passing the structure to the web service. A structure is a complex variable containg a set of key-value pairs.
Using Arrays and Structures
http://livedocs.adobe.com/coldfusion/8/htmldocs/arrayStruct_01.html
A Brief example.
<cfset search = structNew()>
<cfset search.key1 = "Value1">
<cfset search.key2 = 2>
<cfset search.key3 = "Something Else">
You would then provide the variable search as the appropiate parameter to your web service.

Nokia N93 Speaker Problem Please help!

Hello guys, i have bought a n93 because my Qtek 8300 was damaged severly, alright so i get the n93 and i cant use it becuase of a big problem. When i make calls on the recieivng side of when ppl c all there is a flickering noise (the speaker where ppl talk to you) or when i record video the noise happens again. Im so fraustraited becuase i cant use it to make calls only on the headset, so im sure this is speaker problem right? Someone please help me and tlel me what i can do.

29-Mar-2008 09:06 PM
bigboy_245 wrote:
Hello guys, i have bought a n93 because my Qtek 8300 was damaged severly, alright so i get the n93 and i cant use it becuase of a big problem. When i make calls on the recieivng side of when ppl c all there is a flickering noise (the speaker where ppl talk to you) or when i record video the noise happens again. Im so fraustraited becuase i cant use it to make calls only on the headset, so im sure this is speaker problem right? Someone please help me and tlel me what i can do.
Which firmware version you have. To check type*#0000#
If my post has helped you please click the white star on the right

8900 Help me :(

Hi all,
Yesterday I bought a new BB 8900, well, I was using it with no problems, but... before going to bed I put it "loading?" to recharge the battery, and this morning the red light turn on for 5 seg, and a clock appears in the middle of a white screen, i can't do nothing... I can't turn off the BB...
Sorry for my bad english, could someone tell me what it happens?
A lot of thanks,
Javier

scofield wrote:
The BB is in a infinite bucle "turn on - white display with clock 10 seconds - turn off - turn on... etc" I can't stop it, i can't turn off the BB, i can't do nothing...
"Infinite bucle" -- did you mean infinite cycle of rebooting? If so, then you have some work ahead of you -- and I hope you already have a good backup...
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Broken speaker?

I have a problem with calls - the speaker simply doesnt work! Sometimes it helps when I turn on the loudspeaker option, but not always. I've checked the speaker in "diagnosing" and everything works well, it seems not to work "only" when I'm making calls. The problem begun after updating to lollipop.

Performing a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Premium Mail link broken for months - Please help

I have been trying to upgrade to Premium Mail (as per many of the other posts I read on here)
Every time I click on the Premium Mail link it tells me the page is broken. Thsi has been happening for a long while now. I can't find any way of doing it on Yahoo Mail website either. This is driving me nuts. I just want to keep my email address. We have already cancelled our broadband with BT since my boyfriend moved in and we consolidated phone lines.
Please help.
Heather

Your only hope is to contact Yahoo, as BT will have no more involvement as you are not one of their customers any more.
See http://io.help.yahoo.com/contact/index?locale=en_US&y=PROD_MAIL&page=contact
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Help 8900 help

my blackberry curve 8900 just shut down on me so i took the battery out and put it back in then the red light came on but nothing else has < i even tried pressing the red on off button but still nothing aaprt from the red light flashing please please can anyone help me

Explain how you are connecting. I am on Win7 x64 and am having no issues with several phones. It is recommended that you use a USB port directly connected to a USB header off the motherboard not an expansion port from say a PCI card or another example is from a memory card reader (many have extra USB and eSATA ports).
Have you turned up the setting sin Win7 so it is not shutting down USB ports to save energy? Go to:
Start>> Control Panel>>Power Options
Then choose high performance.
When using this profile everything will stay at full power. Under other profiles by default, your PC via the OS will shut things down to conserve power.

Broken Speaker on 8900 HELP!!

Similar Messages

Maybe you are looking for