Broken Timecode during capture in FCP 5.04 Tape does not have broken time?

I am trying to capture video froma mini dv canon camera and fcp is telling me that there is broken timecode. I have checked it with imov with no problem and when I view the tape there is no broken timecodde? can anyone help
Thanks
joe

iMovie does not use timecode.
Canons are notorious for weak timecode and firewire support. Try capturing the tape using another DV player.
x

Similar Messages

Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

I am unable to capture in FCP, Quicktime and iMovie.
I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
Here are the details…
- Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
- OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
- I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
- Deleted my FCP pref’s using FCP Rescue.
- Deleted the Quicktime receipts, and re-installed Quicktime 7.04
- Reverted back to Quicktime 7.01
- Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
- Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
- I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
I may have tried more solutions, but these are the fixes that I can recall.
If anyone has any others suggestions, it would be much appreciated.
Brent

Hi Brent:
Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
Sue

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store

Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.

(Apologies for butting in, wha.)
now older version is not able to connect to itunes store error 306. I am using windows 7.
If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
iTunes for Windows 9.0.x: Error 306

Destination u have specified does not have read/ write access- FCP 7 to Compressor problem!

Hello everyone,
I finally got a video finished in FCP 7, and sent it to Compressor.
When I try to add a templete (any template, but particularly the Youtube), I get a red || Source ! || message and when I hit the submit button I see: "The destination you have specified does not have read/ write access. Check to see if the folder is set to read-only, or check your write privileges."
What the?
I'm using Apple ProRes 422 files.
I tried looking at the video files themselves, with Control + I. It looks like I have "Read & Write" access to me. I'm not sure what to do.
I also tried looking in my preferences for Final Cut Pro stuff, and it was empty, so nothing to erase. I also repaired disk permissions with the Utility application.
Well, thanks for any help.

I haven't tried to save to any directory.
As soon as I send the sequence from Final Cut to Compressor, I am prompted to drag the settings to the destination... but it won't let me submit it for the "read/ write" reasons above.
So I never get the opportunity to save it, I just close out Compressor and go back to Final Cut Pro.
I'm wondering if it has something to do with the scratch disk files. I converted the MOV files into ProRes files and keep them in my documents, then I just dragged and dropped them into the browser. I'm wondering if somehow this is affecting things, because I can't even find a scratch disk folder with files inside.
I also tried to look at my Final Cut Pro preferences file, but I had no idea what I was looking at so I just left it alone.
I really appreciate this by the way.

This log in user does not have proper rights to use WebCenter Capture

Hi experts,
We have WCI 11.1.1.8.0 setup. It has WEC configured. However when I login with "weblogic" user. This is domain admin user. WEC allows user to login and shows top navigation bar. However in the body it shows below message
"This log in user does not have proper rights to use WebCenter Capture"
I am sure i have not gives a proper group/ role to this user. I am not sure which one is that.
Regards,
Vikrant Korde.

Hi Vikrant,
This happens if user is not in Capture Application Role.
Check this:
Log in to EM
Right-click the capture_domain, select Security, and then Application Roles
In the Application Stripe field, select capture, and then click the Search application roles icon to display the Capture application roles.
In the Capture User add this weblogic.
It will work now.

Red interference during capture with FCP 5.1.4

I have FCP version 5.1.4 . I am using OSX 10.6 snow leopard (Macbook Pro). Have captured and edited without any problems. All of a sudden I am getting an interference during capture. This interference comes in the form of a bright red color which suddenly fills half my screen from corner to corner forming a right angled triangle and hiding half of my picture triangularly. it flashes and then remains. Anyone know what the **** this is and how I can rectify it?
I would be EXTREMELY for any help anyone can give me. Thanks in advance.

This is happening to me today as well. Has it got something to do with 10.6.7 I have just updated and now I seem to be having the same problem
Pleasa Help

Why HDV capture in FCP 6.0,3 is not as clear as original footage?

I have tried several capture's settings for HDV footage captured in Sony HDR-HC7. Once it is in my computer's hard disk and ready to strt editing it seems that the video is not very clear mainly the edges of moving objetcs look if they were a liitle bit "dreagged". I ve been told in the Final Cut Training course that the defect is only possible to be corrected in Color program . It fact it is reduced a little when the filter "Film Look" is applied but it does not look as good as the original footage. Is there something I should need to do?. Thanks

#2 Blurry Playback
Shane's Stock Answer #2: Blurry playback
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL BROADCAST MONITOR, OR AT LEAST A TV.
The Canvas shows you what happens after the codec you are working with has been applied. The Viewer shows you the material in its native format. Once you drop the footage from the Viewer into the timeline, it inherits the attributes of the sequence. If it is a DV sequence, the footage will render out as DV.
1. Disable overlays on the Canvas.
2. Make sure you've rendered everything (no green bars at the top of the timeline).
Video playback requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or broadcast monitor routed thru your camera or deck.
NOW...seeing that you are working with HDV, the only way you are going to be able to see the actual quality of what you have, you will need an HD capture card and HD monitor. Matrox MXO plus Apple Cinema Display is a cheap way to go, works with laptops. Or if you have a MacPro, then the Decklink Intensity and HDTV would be a good inexpensive choice. other than that...www.aja.com www.decklink.com
Shane
Shane

Image Capture does not have a 'Devices' option

I have a new scanner and I installed the drivers. It's showing fine in Photoshop CS3 but the window for it is awkward and small and barely has any features to it (there is no selection to for Advanced either). I figured I should try to use Image Capture instead, hoping to have better luck and more features. However Image Capture is not allowing me to go to 'Devices > Browse Devices' because there is no 'Devices' menu listed at all. I've restarted, unplugged things, plugged devices back in. It just says 'No Camera or Scanner Selected' ... the Command B is not even working either.
Has anyone ever had this happen, should I try reinstalling Image Capture?

As for the scanner - so is this new one wireless? When I hooked up my Epson All-in-One, I had to install it via USB first before I could install the wireless (per their instructions). With Snow Leopard, I simply installed the driver and it covered and recognized both the print and scan function - not so in Lion; I had to go through hoops with the scanner part and it finally showed up as a separate unit. I thought that is silly, but - as long as it works..... I'm trying to think of possibilities since I'm about out of ideas, so you might want to consider that (if it applies). The other troubleshooting suggestions usually include redoing the "add" function after a reboot.
As for Image Capture, I am out of ideas. FWIW, I never use it - in my workflow, there is no need for it. Not sure if this would have an impact, but make sure that you choose Image Capture in the CDs&DVDs Preference Pane (mine is set to ignore or ask purposely):
If that does not work, I'd suggest reinstalling the OS over the top of what you have.

Scan and Capture minimizes to taskbar immediately and does not allow scan selection

Scan and Capture was working great prior to upgrade to Windows 8.1 and (I think) and upgrade to V1.4. I vaguely recall using some app from HP to uninstall the previous version...
Current symptoms are that the app will fire up, briefly show the splash screen, and then immediately minimize to the task bar. Clicking on the app in the task bar will bring the splash screen back up briefly, followed by minimization again to the task bar. The app can be closed by right clicking the app on the task bar.
I have uninstalled the app and reinstalled to no avail. My guess is that there is some registry junk left behind during the uninstall that needs to be scrubbed. Probably a function of the uninstall of the previous version?
App works just fine on another Win8.1 PC with the same printer, so I doubt it is a hardware or network issue, however, for completeness, the scanner is an HP CM1312nfi MFP and the PC is an HP Pavillion, [email protected], 8GB RAM, running 64 bit Win8.1 Pro with Media Center.
Thanks for any pointers.

To follow on...
I reinstalled the Complete Package. Subsequent to this install, the legacy HP Laserjet Scan (with UI from 2009) and the legacy Windows Scan and Fax applications connect and scan from this MFP just fine.
The Metro apps (Windows Scan and HP Scan and Capture) do not. The Window Scan (Metro) gives a "Problem Connecting to Scanner" error.
The HP Scan and Capture has the same behavior as before -- splash screen for a second and then minimized to the task bar. I have also tried to launch HP Scan and Capture from the HP AiO Metro app with the same results.
To sum up, the WinXP applications work. The Win8 applications do not.
Junk in registry? Or driver issue?

An error occurs during the installation of itunes. It does not say what kind of error.

It says "The installation encountered errors before itunes could be configured. Errors occured during installation. Your system has not been modified." ??????

Hi
You can download it from the other computer,and transfer it throw the flash storage device to this computer and install this package ,you can try it

FCP QT-movie (Mac) does not uploadi in Adobe Premiere (windows)

Dear friends,
I tried to import a selfmade FCP QT-movie in Premiere Elements (windows). Do you know which QT conversionsetting of FCP is needed to obtain transferrable movies?
(The movie was displayable with QT-windows)
Thanks in advance,
Henk

When you Export to QuickTime Conversion in FCP, you can set the Options for uncompressed AVI, both video & audio. There will no noticeable quality hit doing that.
Assuming both the Mac & the PC are on the same network, then you could transfer that (very large) file via Ethernet to the Windows PC. If they're not on the same network, then use a firewire drive to transport the file to the PC (but you'll have to format the drive properly for this dual use.
It's easier if the two computers are on the same network.

During import ora-01917 user or role does not exist "High Priority"

Hi,
When i import the data the following error occured.
imp system/[email protected] fromuser=dmv_ace_ruh touser=dmv_ace_ruh file=F:\dmvaceruh.dmp log=F:\dmvaceruhimp.log ignore=y
fromuser=dmv_ace_ruh (exported by another database i.e database name is ACE)
OS = Sun solaris
touser=dmv_ace_ruh (database name is SAI)
OS = windows server 2003
Database Common 10g
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via direct path
Warning: the objects were exported by DMV_ACE_RUH, not by you
import done in AR8MSWIN1256 character set and AL16UTF16 NCHAR character set
export client uses WE8MSWIN1252 character set (possible charset conversion)
. importing DMV_ACE_RUH's objects into DMV_ACE_RUH
. . importing table "DMV_COVER_RISK_SMI_DISC_LOAD" 0 rows imported
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT ALTER ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT DELETE ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT INDEX ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT INSERT ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT SELECT ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT UPDATE ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT REFERENCES ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT ON COMMIT REFRESH ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT QUERY REWRITE ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
Regards
S.Azar
DBA
Edited by: azarmohds on Oct 5, 2009 5:11 AM

oradba wrote:
What's not clear with this error message? The mentioned role ''PREM_ACE_RUH' does not exist in the target database. So granting privileges to this role cannot work.
Werner''PREM_ACE_RUH' this is one of the user of ACE database. but i exported DMV_ACE_RUH user data only...
but i cannot import the dmv_ace_ruh data to same user name of SAI database..
regards
S.azar

URGENT BIG PROBLEM:during import track st. in queue simply does not disap

I have problem when importing transport request on production(the transport domain controler is on development system) . The track status in queue simply does not disappear.
I tried(based on what I have seen on an other thread) to delete the transport in import monitor and tp on OS level on productive and development system
Then I deleted entries in TRBAT&TRJOB tables. The TPSTAT is empty.
The problem persists.
What would you suggest . The go live depends on this problem

Hi,
/usr/sap/trans/buffer might still contain entries, be careful do not modify anything here.
Check the link
http://help.sap.com/saphelp_47x200/helpdata/en/3d/ad5b5a4ebc11d182bf0000e829fbfe/frameset.htm
Check the 'Cleaning up the transport directory' and 'Synchronizing the Buffers' links within the above link.
Please do not use subjects like : URGENT BIG PROBLEM.. it is against the rules of this forum.
Regards,
Siddhesh

HT4061 I reset my passcode to the I phone during an update. Now the phone does not recognize the passcode & I can't access my phone?

How can I talk with a real person to solve my problem?

you can restore it to factory settings that will remove the passcode
about a real person then going to an apple store if they have one in your country or the place you bought the

FCP x (trial) , does not have a "share" button in the tool bar

hi
did you get an answer to the question on how to export a file in the trial version of FCPX? In my trial version there is no "share" button in the toolbar at the top of the screen.
When i select file -> share -> .... i get a "blank" destinations screen, giving me no options as to where to export to.
Can anyone help as this is my first project in FCPX and without exporting/sharing it is not worth purchasing the product.
BTW my file size is 13GB - could this have anything to do with my issue?

Yes, Share is in the File menu now (as well as to the far right of the tool bar). If it is blank, something is wrong. Try using the free application "Preference Manger" from Digital Rebellion to trash the FCPX pref files. If that doesn't work, move the application from the Application folder to the Trash. Then launch the App Store, in the Purchases section, click "Install" to the right of Final Cut Pro X (it will not effect your Projects and Events at all, they stay safe).
File or project size shouldn't matter. This is not a very common issue, but in the rare instances it does show up, one of the two solutions above will fix it.

Broken Timecode during capture in FCP 5.04 Tape does not have broken time?

Similar Messages

Maybe you are looking for