Broken VoIP connection E61 to asterisk server afte...

After upgrading and restoring settings from backed up data the mobile phone finds it's WLAN connection and shows an established VoIP connection (as before).
But no incoming or outgoing calls are possible over VoIP. At server side nothing was changed.
Asterisk logs the following at session initiation:
-- Registered SIP 'XXX' at 192.168.1.184 port 5060 expires 3600
-- Got SIP response 400 "Bad Request" back from 192.168.1.184
When trying to call the phone:
-- Got SIP response 488 "Not Acceptable Here" back from 192.168.1.184
-- SIP/XXX-69d3 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
Anbody any ideas?
Thanks in advance.
Nazdravi

as far as i know, you'd need xsan nodes for all machines involved and san storage shared among all nodes. ideally, you'd need primary and secondary xsan metadata controllers just to deal with san metadata, and they should not be your od master or replica.
you could probably skimp on hardware and double up services on each machine, but it probably wouldn't save you much in the short term, at least.
how about moving to more power efficient processors for your current setup? your network as it is now sounds exactly like what some of my clients would love to have, but it would take a lot of cash to build with apple hardware/software.

Similar Messages

Fixed Broken iTunes Connection with Firefly Media Server

Hello, Everyone:
I figured out the way to fixed this. The problem is not with your Firefly Media Server the problem is with iTunes.
Leave your Firefly Media Server alone and edit your iTunes. Please follow instruction on the link I provided below to make iTunes work with Firefly Media Server again. Since, I searched the forum and found no solution for this so I would appreciated anyone who repost this please leave the credit to me. Thanks.
http://sysxtreme.com/portal/index.php/archives/8382

I've found a new firefly/mt-daapd rewrite here that is current:
http://github.com/jasonmc/forked-daapd
http://blog.technologeek.org/2010/08/29/338
I am going to see if I can get it compiled and installed on my FreeBSD system tomorrow. If I do, i'll report back if it works with iTunes 10.

OS 10.4.6. has broken dialup connectivity when using fast user switching

I installed OS 10.4.6. It seems to have broken dialup connectivity when using fast user switching when switching from one user to the next.
For dialup, it is extreamly annoying that I can not resume downloading a file from were it got cut off, but now, if another user wants to check their email, my download always gets broken and has to be restarted. Dialup is slow enough with out having to start from scratch even more frequently, now.
Also, in earlier versions of 10.2 or 10.3 (I don't remember which), I was able to switch users and maintain listening to a single users' iTunes.
I would like to be able to switch users and not lose either my dialup network connection or the primary users currently playing iTunes songs.
Perhaps for iTunes, one should be able to chose to mute another users' instance of iTunes, if it is currently playing.
Mini-Mac 1.42GHz 80GB BT/AE Mac OS X (10.4.6)

I have not tried replicating this but might be able to provide some additional information.
We use network login accounts on our desktop computers. Fast User switching deliberately will not work for multiple network login accounts. (Remember network login accounts normally also have an associated network home directory mounted via AFP.)
Now a bit of background about volumes and mount points under Mac OS X. Under Mac OS X, any additional drive (or more accurately 'volume') is listed under the 'Volumes' folder, remember also that Mac OS X is a Unix operating system. So just as normal for Unix, the boot drive is '/' or the root level and Volumes is a folder in it. The underlying Mac OS X software automatically 'attaches' and additional volumes as sub-folders in the 'Volumes' folder (in Unix speak these are called 'Mount Points'), if you have an external hard-disc called 'Fred' then this would be represented by the following path
/Volumes/Fred
If you happen to have two volumes with the same name connected at the same time then while in the Finder they may show up with the same name, in Unix they would have different names automatically assigned to keep them separate like so
/Volumes/Fred
/Volumes/Fred 1
Now getting back to the Fast User switching problem and AFP volumes, when you login to a File Server volume it also is automatically added to the Volumes folder, so if we have a File Server volume called 'Shared' it would look like
/Volumes/Shared
With Fast User switching potentially both user accounts could be accessing the same /Volumes/Shared which means both user accounts would be talking to the server via the same File Server login, hence the possibility for one of the Fast User accounts to be using the 'wrong' permissions.

Mountain lion 10.8.2 can not connect to windows NAS server Dell Sentinel

I recently upgraded to 10.8 OS My office is connected to a NAS server Dell Sentinel WD4000. Everything was working fine until the upgrade from 10.7 to 10.8 Now when I "connect to server" Not one of my accounts can connect. All I get is wrong password. The server connects to every computer on the network except the 10.8 The server shows up as an icon on Shared Devices.
Someone please help me. Apple has been useless.

I hope this helps. But, Apple has confirmed a significant bug in 10.7.4 that breaks SMB. Their support says they are working on it, but they do not know when the fix will be released. It has broken SMB at all sites I support including my own location where Lion server has the updated version as well. Only AFP works but not consistently. The suggestion is to restore 10.7.3 from a backup or wait until the fix is released. SMB does work - but only when admin authentication is used on Mac servers - don't know about Windows Servers. I do know the client side of Mac's also are affected with SMB issues. Good luck!

VOIP connectivity with BIAMP Tesira DSP

Hello All,
We are looking at hooking a BIAMP Tesira DSP into our Lync 2013 server to handle VOIP calls in our conference room. The unit has an add in module specific for handling VOIP connectivity (SVC-2) but I haven't been able to find any documentation on how
to go about configuring it for a Lync server.
Has anyone ever worked with one of these or have any ideas on where to start?
Thanks!

Hi,
I agree with Holger Bunkradt. You need a Microsoft Certified Media Gateway or a SBC between Lync Mediation Server and the BIAMP Tesira DSP.
You can choose from the link below:
https://technet.microsoft.com/en-us/office/dn788945
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

How do I connect to a terminal server with my mac book pro

How do I connect to a terminal server with my mac book pro

Use the Remote Desktop icon on the tray and make sure to use the Fully Qualified Domain Name (FQDN) on the 'name of server' field. If that does not work then use the IP address to connect.

Mac computers in the office are not able to connect to our exchange server.

We started facing this problem about a month ago in our office where the apple computers can not connect to the exchange server via outlook or applemail or anything for that matter. All the other computers can connect to the exchange server with no problems
and the apple computers can even access the exchange server via OWA but the outlook and applemail apps would not connect to exchange. We have tried even deleting and re-creating some accounts on the apps but they still would not connect. At this point I am
at a complete loss and I looked everywhere through google to find out if anyone else has faced this problem but to no avail.
A little background information. This specific problem started happening after there was an un-expected series of power outages to the servers and they were shut down un-expectedly. I personally restored the servers and turned on all the services and made
sure everything was up and running after the power outages and everything was working fine. Also the first instance of the problem with the mac computers only happened two days after the servers were back up and running again and they had no issues in those
two days.
Right now we do not have that many mac users in our offices (only 3-4 users) and I have instructed them to use the OWA in the meanwhile but it is however an inconvenience to them. By now you may have realized that I am not a very experienced server admin
and I would really really appreciate any help. I extend my thanks in advance for any insight.

Hi Martin,
Thanks for the reply.
Right now I have Apple mail and Outlook installed on my mac laptop and both the applications do not connect to the exchange server. Apple Mail simply does a long process when I give my credentials to create my account and then it gives an error saying it
could not find the server while outlook quickly tells me that either the username or password is incorrect. At the same time I can connect to the server through outlook on my windows computer without any problems whatsoever.
From your reply, I gather that the VIA headers only affect Apple mail and should not affect Outlook app on the mac but right now, neither apps are connecting to the exchange server.
Either way I am trying to find out how to remove the VIA headers because it does not seem that we are using Kemp on the exchange server. Right now I do not have the in depth knowledge that I need because I was not involved in the implementation of our server
system, that was taken care of by a service provider and I was put in charge of mostly simple admin work. Now we are out of contract with the service provider so pretty much everything has fallen onto my shoulders.
If possible, would you mind pointing me in the right direction to finding out if I am using a L7 load balancer and how I would go about removing the VIA headers?

Taking too much time and not connecting to ipad software server

taking too much time and not connecting to ipad software server and not updating.. why

because everyone is doing the same thing you are... be patient, and you will get the update... I had to grab the update over 3G (it won't let you download or install, but it got me in the door) and then switch back to wifi and download and install.

I am running 4.0 version, and each time I open Firefox, I get a software update that says "Downloading Firefox / connecting to the update server", but it just STICKS there??? Why is this happening?

I am running Firefox 4.0 version, but for some reason, it tries to download updates and then gets stuck on trying to connect to the update server. This has been happening the past few days. When I close the update, I can proceed in Firefox without incident (that I know of).

See:
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then easiest is to download the full version and uninstall the currently installed version and remove the Firefox program folder to do a clean install of the new version.
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Connection from the web server to the database which is situated in another machine.

Thanks for the reply.
I need to know, whether there shold be a physical connection between the web server and database machine? or can we connect to the database machine through the web, if the database machine has a domain name? if there is a physical connection, we can use the jdbc/odbc connection. but if we are connecting through the web, how can I estblish the connection using a JDBC/ ODBC connection?
Regards,
George

As long as there's a network connection between the two machines, you should be able to make the connection. I'm not sure what the difference between a 'direct connection' and a 'connection through the web' is-- are you actually running a network cable from one machine to another?
When you cannot make the connection, are you able to do a 'tnsping' on the target database?
When you say 'connecting through the web', is it possible that you're going through a firewall? If so, the firewall may be blocking the ports you need to communicate on.
Justin Cave
ODBC Development

Config Office Add-In - Connection to BI Office Server

Dears,
I've installed the office-add in..so far so good. But now when I want to login to the addin in excel, I've to set up a connection to the office server.
Can anyone help me with that...I'm always failing, even after following the installation guide.
Many thanks for your feedback.
Kr

Hej Remc0
thanks for the answer...but even after following all these steps, I still have test connection failed...
The office server name, is this the name you also have when you want to connect to your presentation service?
As it's all straight forwards, I don't have a clue to this...
Txs for your feedback.

When Firefox shows me an update and asks if I'd like to update, I click continue, but it doesn't update. It just goes to a "software update" window and says "connecting to the update server..." and then doesn't do anything else. It never updates. HELP!

When I sign on to Firefox, a "Software Update" pops up and asks if I'd like to update Firefox. I click Yes/Continue and when I do, the page says "Downloading Firefox" - connecting to the update server... - but it never finishes. It continually shows the blue/white striped line.

Start at '''http://www.mozilla.com''' and download the latest
version. At the completion of the download '''don't let the setup
start Firefox for you''', when the setup ends, start Firefox in your
normal manner this way you will be less likely to create a new profile.
The extra startup pages are temporary -- read them. The next time
Firefox comes up you should be back to starting with your normal home page.
Note: Firefox must be down once the install starts.
:Close Firefox with File>Exit. Then make sure Firefox is not running --
:On Windows: check the "Processes" tab in the Windows Task Manager.
:On Mac: Firefox > Quit then Command+option+Esc, if Firefox running use Force quit
'''Permission errors on Mac:'''
"If you were getting permission errors on a Mac, download the latest
Firefox version, then uninstall and reinstall Firefox. '''Do not let the uninstall remove remove anything but Firefox itself'''; otherwise, you will lose your profile directories and files as they contain your settings,
bookmarks, history, extensions, passwords, and cookies.
If you can't download as mentioned above, find your system and the Firefox version you want in releases, download and start the install as seen above
* ftp://ftp.mozilla.org/pub/firefox/releases/

I keep getting notified that there is an important update to Firefox that I need to install but when I click on the icon all that happens is a message that I am connecting to the update server but a connection never happens

I keep getting a message stating that it is critical that I update my Firefox. I click on the update icon and a software update box shows up and tells me I am connecting to the update server but the connection never happens. I have left it running for hours but no connection ever occurs. Should I ignore this or do I need to go to your website and download from there? I don't want to lose my current settings.

In the Task Manager, make sure to check both the Applications tab and the Processes tab. On the Processes tab, Firefox may have two different components running: firefox.exe and plugin-container.exe. Well, in 3.5.11, it would be only the first one.

How to make Adobe acrobat feature to convert SAP Pages to PDF available for multiple users connected to the same server

We have installed Adobe Acrobat X Pro- English,Francais,Deutsch version 10.1.9 in our test environment and tried testing it for converting SAP pages into PDF with a few pilot users. In doing so we faced a challenge, where only one user at a time can use Adobe Acrobat PRO to convert SAP pages in to PDF.As long as the first user who is connected to Adobe Acrobat Pro via SAP isn’t logged off, other users connected to the same server are not being able to get the “Save As” dialog box to save the PDF in their preferred location.
This is a business requirement and we need an urgent solution for the same. Can anyone help us in telling us if this is possible and if yes the how to go about?

It's not something we deal with here, the LiveCycle products are a different world. Key points: Adobe LiveCycle is a range of products, some desktop, some server. LiveCycle PDF Generator is the one you should look at, it comes in 3 editions. License terms are by negotiation. Key management is via its Java API.

Broken VoIP connection E61 to asterisk server afte...

Similar Messages

Maybe you are looking for