Broken Wireless - iOS 6 on iPhone 4S

I moved to iOS 6 and when my phone came up it could not connect to my home network. I did the following on the phone:
- Updated phone to iOS 6 from 5.1.1
- I thought maybe the network settings were messed up so I "forgot" the network and tried again, no luck.
- Reset all network settings, no luck.
- Full restore of iOS 6 and setup as a new phone (no data/apps/etc restored), no luck.
- Removed all encryption on my access point, no luck.
So I then setup a spare access point I had and the iPhone connected right away (even with the same SSID and encryption as my normal home access point). This indicates an incompatibility between iOS 6 and my access point.
It is not an encryption issue, because it can connect to an open, WEP, and WPA2 configuration on my spare access point without a problem. It can even connect to my Mini that is performing Internet Sharing.
The  access point is a Netgear WG102 and before iOS 6  my iPhone 4S worked great on it. I also have an old 2gen iPod Touch, 1st gen iPad, Macbook Air, Mac Mini, etc, etc, etc on the access point with no issues. It's just my iPhone and iOS 6 that can't connect to it.
I did the following to the access point:
- running latest/greatest firmware
- changed RTS threshold, Frag length, Beacon Interval, DTIM interval, etc,  with no luck.
- enabled WMM with no luck (which I saw fixed someone elses issue with a beta version of iOS 6 and their iPad)
- hard/factory reset of the access point (phone can't connect to the default and wide open "Netgear" SSID when it comes up)
The phone works on all other access points that I have tried outside my house.
Any thoughts?

mikesullakasully wrote:
Did some digging on your router. I see it's an older G band router. And apple recommends: "Routers that only support 802.11g should be put in 802.11b/g mode, while those that  support only 802.11b can be left in 802.11b mode."  Try switching the router to B only and see what happens.
Also, the spare access point you were able to connect to, what bands/frequencies does that one have? (a/b/g/n - 2.4 and/or 5 Ghz)?
Hmmm, not wild about going down to B only here, that will really slow everyone else down. I will have to try that later.
The other router was a Linksys WRT54GL (B/G 2.4GHz) running DD-WRT firwmare.

Similar Messages

  • Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?

    Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
    I would like to strem movies from the hard drive to iphone.
    I have already seen the Goflex Stellite, which works this way.
    Is there any other device that could do this?

    I did a typo. My current computer is a 2010 1/2 iMac.  The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs  would be possiblities.
    Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days.

  • Since latest ios update, my iphone 6 loses my ringtones. I download new and that's gone the next day too

    Since latest ios update, my iphone 6 loses my ringtones. I download new and that's gone the next day too. How can I get my phone to keep my ringtones?

    Most USB port do not supply enough current to charge the iPad.

  • Problem with GarageBand for iOS 6/7 Iphone 3gs / 4

    Problem with GarageBand for iOS 6/7 Iphone 3gs / 4
    Hello,
    On February 16, bought the GarageBand for iOS which was free and so I find and install it on my 3GS .
    Take the demo: Curtain Call Demo
    and within the instruments :
    audio Recorder
    Sampler
    Smart Drums
    Smart Strings
    Smart Bass
    Smart Keyboard
    Smart Guitar
    Keyboard
    Drums
    Guitar Amp
    1.4.1 is the latest version for ios 6.
    Configure my AppleID on a Iphone 4 and install the program , the version I have the Iphone 4 is the orange ( different from 3gs ) icon and put it on the AppStore : ios 2.0.1 for ios7.
    With these instruments :
    audio Recorder
    Sampler ( to download the instrument )
    Smart Drums ( to download the instrument )
    Smart Strings (Download the instrument )
    Smart Bass ( to download the instrument )
    Smart Keyboard ( to download the instrument )
    Smart Guitar
    Keyboard
    Drums
    Guitar Amp ( to download the instrument )
    and if I give what I need to restore tells me if I bought it I did not restore anything and tells me to buy :
    Complete collection of GarageBand instruments and sound at a price of : € 4.49
    As they are 2 different versions ? More than anything I say because I have to pay for the instruments in the 2.0.1 version of the Iphone 4 ... ?
    And besides not wearing demo Demo Curtain Call : (
    GarageBand 1.x If you are upgrading it using iTunes on a Mac or PC, you can restore the original collection of instruments and sounds. There is no need to buy this collection. Press "You've already purchased?" When displayed on iPhone, iPad or iPod touch.
    this puts on the AppStore but I have tried to restore as I wrote above, and does not work. There is nothing to restore.
    regards

    I've been having the same problem. However, I believe my problem is due to the 3G issues I've been having. I don't have internet access even when the 3G symbol appears, so probably my iphone keeps trying to connect to the network and has its battery drained! Have you been having the same issue?

  • How do you install an iOS update on iPhone via iTunes after previously downloading it

    How do you install an iOS update on iPhone 5 via iTunes after previously just downloading it

    Hello Myyster,
    Thank you for using Apple Support Communities.
    You can use the following article to install the iOS update on your iPhone:
    Update your iPhone, iPad, or iPod touch iOS software
    Regards, 
    Jeff D. 

  • Can't send iMessage after update to IOS 7 on iPhone 5

    After I update to IOS 7 on iPhone 5 the iMessage function seems not working properly. when I trying to send iMassage the "sending" bar loads up to 90% (slowly) and then stops dead and doesn't move. It stays at that 90% mark until it either starts working, many minutes later, until I delete the message, until it goes to "sending failed" or whatever it says with the little red "!" it will not automatically send by text even the iMessage function is not working. This problem wasn't happened all the time but regularly. This problem happened when I update to IOS 7 on my iPhone 5 and also happened in my friends' iPhone 5 with IOS 7. After I restart everything will back to normal until it crashes again.
    Anyone who get the same problem like me?

    I found the same solution, resetting network settings. Sure we have to re-input Wi-Fi network passwords, but it's not a big deal. What is a big deal is that this solution is temporary -it works for a day or two and then the problem returns, for both me (iPhone 4, 7.0.2 Verizon) and my wife (iPhone 5, 7.0.2 AT&T). I've just reset my network settings for the 2nd time since installing iOS 7 on launch day and 7.0.2 on it's launch day.
    C'mon Apple! A little help here? I really don't want to have to do this every few days.

  • After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

  • I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    See Here... Unable to Update or Restore...
    http://support.apple.com/kb/HT1808

  • After upgrading to IOS 8 my iPhone 5 wifi is not working well at all .. and can't connect to any of apple services like apple store even can't upgrade my application

    After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application  .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise

    Hey ahmedfromtanta,
    Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I just updated iOS on my iPhone 5. What a shock!! Where is the premium look and feel I bought my iPhone for? If I wanted the lokale feel of iOS 7.0 I would have bought a much cheeper taiwanese smartphone. Please let me know how I can return to the origina

    I just updated iOS on my iPhone 5.
    What a shock!! Where is the premium look and feel I bought my iPhone for?
    If I wanted the lokale feel of iOS 7.0 I would have bought a much cheeper taiwanese smartphone.
    Please let me know how I can return to the original look and feel of the iPhone surface I bought my phone for.

    You had plenty of time to look at screenshots on the internet and read various blog posts about iOS 7.

  • Is there a way to set wireless network priority on iphone? If not, there should be!

    Is there a way to set wireless network priority on iphone? If not, there should be! I have a wireless router with dual band signals, as well as an extender at the other end of my home... it would be nice if I could set a priority list so my phone knows to always connect to the 5GHz signal if available, rather than trying to connect to the 2.4GHz signal which is on the other side of the house...

    By default, the iPhone will prioritize Wi-Fi over cellular for data and when doing Wi-Fi, will latch on to the strongest signal it can associate (latch on) to. But all that is automatic, there's no evident control for manual adjustments. Other than deleting the Wi-Fi networks you don't like.

  • I updated to iOS 8 on iPhone 5s and now iMessage will not verify my email. It has said "Verifyng" since yesterday, but has not sent a verification email. I checked my iCloud settings for that email address and it shows "pending".

        I updated to iOS 8 on iPhone 5s and now iMessage will not verify my email address to use to send/ receive messages. It has said "Verifyng" beside it in settings since yesterday, but has not sent a verification email. I have also tried Adding it as a new email address several times, but get the same outcome.  I can still send/ receive texts from my phone number, just not from the email address.
         In my iCloud settings under Contact Information for that email address and it shows "pending".  When I select "Resend Verification Email" I get "Cannot Connect to iCloud".

    Hello, Dorian071.  
    Thank you for visiting Apple Support Communities. 
    Here is the best article to reference when experiencing issues with iMessage activation issues.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Cheers,
    Jason H.

  • I have garagaband for iOs in my iPhone 4S, I connect my squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

    I have garagaband for iOs in my iPhone 4S, I connect my Squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

    You got the new iphone?????   I have same problem.  I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was).  Have you found a solution?????   I even tried to change import settings on format transfer but hasn't worked. 

  • How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)

    How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work (on prior iPhones) before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)
    I don't get it, I read one post about why would we have to buy an AirPrint Printer when we have used the "print to a wifi printer" just fine in the past?  Yes I feel that's exactly what's happening to me now too. I want to print from my iPhone and iPad to my WiFi Printer which is also now connected to my Airport Express WiFi network just fine. No problems.

    Very glad you added that bit of information because I see different problems similar to this.  I want to share with them what you did and hopefully you not only fixed your specific problem but you can lend some more advice to others with problems like this. Thanks!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • I installed ios 7 in iphone 4 - i am not able to create event in calender ,   icon is not active

    i installed ios 7 in iphone 4 - i am not able to create event in calender ,   icon is not active

    You will have to upgrade your operating system version and possibly your whole computer.  We cannot provide more information easily until we know more about your system.
    Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..."  Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
    Apple does tell you about required equipment for the iPhone -- in 8 point medium gray type on a light gray box.   The Store associates kind of automatically assume everybody is running a new model computer and the one I met when we bought our iPhone had never seen a pre-2008 Mac and was somewhat puzzled why anybody would own such an antique.

Maybe you are looking for

  • How to populate a form from an xml file with multiple records

    I want to be able to create a single form that will add pages as needed based upon the number of records being imported from an xml file. I have an IRS form that does this exactly, but I do not know how to re-create it.  I entered data into the form,

  • Setting default columns displayed in interactive report

    Hi APEX community, I recently created an interactive report based on an sql query as follows: select "STOCK_CLIP_ID", "TITLE" from "STOCK_CLIP" After creating the report I added an additional column: select "STOCK_CLIP_ID", "TITLE", *"UPLOADED"* from

  • Package Body in the tree doesn't show all procedures

    I am using Sql Developer 1.0.0.14.67 on Win XP Professional, DB servers Oracle 9i on both Linux Red HAt and Win XP Professional I have troubles with one of packages - in the tree under Package Body SQL Developer doesn't show all procedures of this pa

  • Essbase 11.1.2.1 AIX Install Issue

    Can't seem to get Essbase 11.1.2.1 software installed. When we run the installer, it hangs on the component install of Oracle HTTP Server under the Foundation Services. It does the following step, then hangs for 15 minutes (The timeout value): [2011-

  • BAPI to change maintenance plant on Equipment

    Hi everyone, Is there a BAPI which changes the maintenance plant on the equipment. I tried both BAPI_EQMT_MODIFY and BAPI_EQUI_CHANGE unsuccessfully. If any of you have an idea of any BAPI which does the same or if the plant can be changed with the a