Broken WRTU54G-TM 1.00.21 Auto Updating

I have a big problem with this firmware (.21) which is being forced onto my router.
Upnp is completely borked with it using xp-sp3 x86 for me. On 1.15 it works fine, but can only keep that on for a few minutes before .21 is forced upon me again.
please someone help me stop the auto updating, my whole pc runs like a snail because of this .21 and it's broken Upnp

I've been having the exact same problem. The router absolutely refuses to acknowledge upnp requests after the .21 upgrade.

Similar Messages

Auto update typedef not working in LabVIEW 2009

I was creating a type def for a customized button control and trying to figure out what action went with each of the 6 different picture images. In the process, I found that the only way I could get my VI to auto-update the control was through using a strict typedef. The auto update from typedef was selected, and the VI would be broken everytime I went to modify it until I saved and closed the control, but the control on the VI would not be auto updated. I would have to replace the control to activate the change (similar to what I would need to do if the control was configured as a control and not a typedef) This may be a bug that needs to be looked into, but I don't know where to make a bug report.
I did find the solution to which picture image went to which action, the help files only explained 4 images. I'll post what I found here just for reference. The images are in the following order on the right click menu:
1 2 3
4 5 6
With the following explanations for each:
1. False Case
2. True Case
3. True-to-False Transition Case (time between mouse click and the release of the click)
4. False-to-True Transition Case
5. Mouse Hover Case when False
6. Mouse Hover Case when True
-Mike

astromike wrote:
Then that makes sense. I'm currenlty only dealing with the appearance, I haven't dug into the Block Diagram on this one yet. I was trying to get the appearance of the button to act correctly first, but I didn't have a good explanation of which image state did what. Each time I tried to change it, I thought it would update on the Front Panel with the "auto update" checked. At one point yesterday I did have the right images on the right states, but didn't see the change because it was only a typedef. I'll keep it as a strict typedef and am glad to hear that it was with how little I understand these custom controls when used as a visual control.
We definitely do not want the image traveling inside the Block Diagram.
Here is my Nugget on Type defs. There may be something in there that can help you. At the tail end I mention default values and ways to handle them.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Windows 8 auto updates

I purchased an ACER laptop with windows 8 last week. I was previously using a laptop with Vista.
Last night when I decided to shut down, I noticed the message indicating updates were being downloaded and I should not shut down until completed. I've never been happy with auto updates. In my opinion if it's not broken don't fix it. I always think that
updates should be decided by the end user, after all they own the computer, not Windows. However, when I turned on the laptop this morning and after the updates had been installed I noticed the Internet Explorer icon had disappeared from the desk top/task
bar. Then appeared a screen telling me to chose which browser I wanted to install. Why should this appear when I already had a browser installed which worked? I had to find the Internet Explorer in the Program files on the C drive and recreate the pin to the
task bar. I'm 63 years old and not an expert but I did figure out how to do this. However, I have friends some older than me who wouldn't have had a clue how to do this and would have had to call for help to recover this. Why on earth did that windows update
do this ludicrous update?

you can goto control panel --> Window Update --> Change setting (on left) --> Select Check the updates and let me choose weather to download and install them.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Adobe is not maintaining Flash Player auto-update

Flash Player auto-update is broken. The URL that is checked by the auto-update agent has not been maintained properly by Adobe:
https://fpdownload.macromedia.com/pub/flashplayer/update/current/sau/11/xml/version.xml
<version>
     <ActiveX major="11" minor="4" buildMajor="402" buildMinor="287"/>
     <Plugin major="11" minor="4" buildMajor="402" buildMinor="287"/>
     <MacPlugin major="11" minor="4" buildMajor="402" buildMinor="287"/>
     <SAUConfig checkFrequency="1"/>
</version>
This information is obviously out-of-date, as the current full-release version is Adobe Flash Player version 11.5.502.110.
http://www.adobe.com/software/flash/about/
As a result, client machines relying on the auto-update process are not being patched. The client machines themselves appear to be checking properly - they have internet access and fpsaud appears to be working properly.
There's really no point to having the auto-update facility if you're not going to maintain it. You might as well just pull it out of the product.

This is as designed. The silent auto update mechanism is not updated until 30 days after a major release. However, the older style UI notifications are sent out within 7 days (and a system restart). Hopefully the FAQ below explains how this works.
How does the automatic update feature work in Flash Player?
If you are responsible for updating clients within an enterprise network, we do have an option available that allows you to run your own update server and immediately push out builds silently and automatically.
http://blogs.adobe.com/spohl/2012/04/24/it-admin-deploying-flash-player-via-background-upd ater/

Auto-update and Specific version with OBJECT...CLASSID=...

We're deploying an applet, and want to be sure to use a specific version of the JRE. So far we've been using 1.4.2 without problems, and now its time to support 1.5.0 (5.0).
We intend to do this with <object classid="clsid:CAFEEFAC-0015-0000-0000-ABCDEFFEDCBA">....
as outlined in:
http://java.sun.com/j2se/1.5.0/docs/guide/plugin/developer_guide/using_tags.html
The 1.5.0 control panel (for Windows) also includes an "Update" pane where java will be auto updated, if a newer version is found. (The 1.4.2 version apparently also contained that, but I was never updated to 1.5.0....)
What will the "Java Update mechanism" do when a 1.5.1 version is released at some point? Will the installed 1.5.0 version automatically be replaced by the new 1.5.1 version, so the <object classid="clsid:CAFEEFAC-0015-0000-0000-ABCDEFFEDCBA"> gets broken? Or will 1.5.1 be installed in addition to 1.5.0, so our applet tags still work? Or will the "Java Update mechanism" only install newer updates to 1.5.0 (e.g. 1.5.0_03)?
Naturally, our tech support won't be thrilled to get calls from every single customer complaining that the 1.5.0 JRE can't be found immediately after Sun releases 1.5.1... :-D
I'm assuming that once installed, 1.5.0 will never be "auto-removed" due to "Java Update mechanism". Is this a correct assumption?
Thanks for reading this far,
Peter

We're deploying an applet, and want to be sure to use a specific version of the JRE. So far we've been using 1.4.2 without problems, and now its time to support 1.5.0 (5.0).
We intend to do this with <object classid="clsid:CAFEEFAC-0015-0000-0000-ABCDEFFEDCBA">....
as outlined in:
http://java.sun.com/j2se/1.5.0/docs/guide/plugin/developer_guide/using_tags.html
The 1.5.0 control panel (for Windows) also includes an "Update" pane where java will be auto updated, if a newer version is found. (The 1.4.2 version apparently also contained that, but I was never updated to 1.5.0....)
What will the "Java Update mechanism" do when a 1.5.1 version is released at some point? Will the installed 1.5.0 version automatically be replaced by the new 1.5.1 version, so the <object classid="clsid:CAFEEFAC-0015-0000-0000-ABCDEFFEDCBA"> gets broken? Or will 1.5.1 be installed in addition to 1.5.0, so our applet tags still work? Or will the "Java Update mechanism" only install newer updates to 1.5.0 (e.g. 1.5.0_03)?
Naturally, our tech support won't be thrilled to get calls from every single customer complaining that the 1.5.0 JRE can't be found immediately after Sun releases 1.5.1... :-D
I'm assuming that once installed, 1.5.0 will never be "auto-removed" due to "Java Update mechanism". Is this a correct assumption?
Thanks for reading this far,
Peter

Firefox auto-update bounces back end forth between 3.6.11 and 3.6.12

Firefox keeps going through the following apparently endless cycle: It realizes it's not on the latest version and auto-updates from 3.6.11 to 3.6.12. Everything is fine for a few uses, then it tells me it needs to reboot to complete an update, upon which its "completion" of the update results in it reverting back to 3.6.11. After a few uses of that version the entire cycle repeats (It again wants to install an update to 3.6.12)... and so it continues

You can check for a problem with the prefs.<br />
See http://kb.mozillazine.org/Preferences_not_saved

Client Auto-Update questions

We just updated our Dev system to SP5 with Patch 2, but the clients are not updating automatically.
I have checked that the Client and Admin boxes are checked for auto-update and can see nowhere else that this can be done.
I double-checked with the Master Install guide, and this appears to be the only thing that I need to do to make it work.
The clients are currently at 502, and they should now be 506.
Also, is this controlled by the files in C:\BPC\Websrvr\Web\Installation?
I have checked the live server (BPC 5.1 SP3) and the Dev server (BPC 5.1 SP5r2)
Both of them have EverestClient.exe and EverestAdmin.exe with version number 12.0.0.49974
Does that seem right? I would have expected an increment in version number.
Has anyone else seen this, and can you offer any advice?
Thanks
Craig
Edited by: Craig Aucott on Feb 23, 2009 9:46 AM

Here is an extract from the note:
It does not say about the Patch! sorry...
the note is 1269662
Summary
Symptom
The Client Auto Update feature does not work in 5.1 SP5.
Other terms
auto, update, client, upgrade, install
Reason and Prerequisites
This is due to unintended consequences of fixing IM 3569686 issue in SP5.
Solution
Remove the '<remove name="Documentation"/>' node from the web.config file located in the x:\bpc\websrvr\web directory and save.
Once all clients have been updated, add the node back to the file.
The node is found in the following section:
<globalization requestEncoding="utf-8" responseEncoding="utf-8"/>
<webServices>
       <protocols>
            <add name="HttpSoap"/>
            <add name="HttpGet"/>
            <add name="HttpPost"/>
            <remove name="Documentation"/>
        </protocols>
</webServices>
Header Data
Release Status:     Released for Customer
Released on:     25.11.2008 19:51:41
Master Language:     English
Priority:     Correction with high priority
Category:     Program error
Primary Component:     EPM-BPC-MS-SVM-OTH Other
Hope this helped
Bye

How do I roll-back to the previous version of Firefox? An auto update occurred and now one of the programs used at the office (ACT! v6.0 SwiftMail) won't run with the browser.

The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
HELP!

Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]

Auto update of Schedule Agreements

Once a schedule agreement has been created will MRP auto update the delivery date (for JIT) if the lead time is zero days and the new need date is today?

You need to check what is the procedure (T-Code) from which the data gets updated into these tables.
For example
when we craete a material from MM01 the data gets updated in the corresponding table i.e. EKPO.
In same way you need to find the process and then you can use BTE (Busineess transaction events) for that process. BTE are only for FI module and these tables are also related to FI .

My firefox recently updated. Now my pop mail server won't work. I did a 'restore' to last week, and it was fine. It has now auto updated. No mail server.

I have read through several responses to others who are having problems following an update. I am not computer savvy enough to understand half of the recommended 'solutions'. I need clear and definitive instructions of what to do. (Instruction for 'dummies' is what I need.) I can not 'restore' my computer continuously, only to have the auto updates cause the pop mail server to stop working each time. If there is nothing I can do, I guess I will have to stop using Mozilla Firefox. Can you help?

There is no solution for Firefox and POP. Firefox doesn't do email and has no need for a POP email server.
If you are using Firefox to view and send "email", you are accessing a webmail service provider.
http://en.wikipedia.org/wiki/Post_Office_Protocol

Crashing on start up, auto-updating even when disabled & not allowing a safe toolbar add-on to download

I have followed all of the steps in all of the relevant help articles (http://support.mozilla.org/en-US/kb/firefox-crashes-troubleshoot-prevent-and-get-help#w_get-help-fixing-this-crash), and nothing has fixed this problem.
I was running v17, and yesterday it auto-updated to v18 when I opened firefox. As soon as it updated it crashed, pressing 'restart firefox' did nothing, I could only quit. So I found an old install file, went back to v17, checked the option to ask permission before updating, run malwarebytes and spybot, so my PC is clean. This morning, same thing happened - auto update with no warning or permission given. Crashed. Repeatedly, restarted, closed everything else that was running, uninstalled and reinstalled the older stable version. Both times I spent a long time reinstalling add ons and themes. On top of that my goodapp toolbar from goodsearch will no longer be installed by firefox because 'it can't modify the necessary files'. All other add ons work fine, and I was using this toolbar with no issues in v17 only yesterday.
The second reinstall I clicked the option 'never check for updates'. But tonight, when I opened firefox, it updated without warning to v18 again and I was ready to switch to chrome after a decade of using this browser. There was no Firefox (safe mode) to run from my program files, and since I couldn't open the browser at all before it crashed, all I could do was uninstall and reinstall v17 for the third time in 24 hours and as you can imagine I am not very happy that your so-called stable release is anything but that. I think with the number of people having problems that you should stop work on v20 and actually accept there is a problem with this release instead of trying to blame it on malware.
Latest crash report ID: bp-3ea35888-008f-4e21-b31f-023002130112

This crash is usually caused by to malware and the involved randomly named file in your case is astktkra.dll as you can see in the modules list of the crash report.
Try to use MSConfig and disable that file to prevent it from getting started.
*http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-windows/
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) to see if that allows to locate and remove the file either manually or with a malware scanner.
You will have to search the Windows registry (Ctrl+F) for references to that file and export and remove involved keys to avoid startup issues with missing files or alternatively use a registry cleaner like CCleaner.
If you are not comfortable with editing the registry then it is best to skip this step.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Won't open at all after auto update!!! dead in the water!!!

yesterday I was informed that an auto update had been done. for 6.blah.2 or something. I don't know. I was immersed in the constitution and Thomas Jefferson was waxing his ass. Anyway last night I shut down, all is well in the world. This morning I try to log on to see if my prof has any news for me...nothing. You know, no coffee, perhaps I'm not awake, kidnapped by ailens. So I shut down and try again. Nothing. But IE worked...So here I am...What is up?

Firefox will not start
* https://support.mozilla.com/en-US/kb/Firefox%20will%20not%20start
* http://kb.mozillazine.org/Browser_will_not_start_up
Check and tell if its working.

How do I disable linked smart-object auto-update/refresh?

Working in the CC3D features, I am constantly making changes to my bump map. Every time I step-backwards, or make a significant change to the bump texture (smart object?), CC auto-saves the layer. This specific file is a very very large document (3 gigs in the bump texture layer alone), and the 3D layer has lots of lights and is very complex. This auto-refresh/update really bogs down the time that it would take me to make my changes. I have a very fast machine (I know it's fast, I dont need to list my specs), and I have all shadows disabled.
How do I disable linked smart-object auto-update/refresh?

If you do not like a feature like smart objects there is nothing forcing you to use it. Use some other features to do what you want. Please don't ask Adobe to introduce bug into smart object support.
You could work on your bump maps textures in external files. When your done some time in the future you could edit your project with the smart object layer and use replace smart object. Only then will all smart filters be applied to the smart layer with the replaced smart object.
Or if by CC Auto save Layer you referring to CC Generate feature you can disable that feature.
I have no idea what your referring to when you write "CC auto-saves the layer" being a feature. I know CC Generate will write layers out as web files but that more a Web feature then a 3d feature. Where do you see your layer being saved?

How to disable yum auto-update in OL6

Hello,
What is the correct procedure to disable yum auto-updates?
The "yum-updatesd" daemon that existed in OL 5 does no longer exist in OL 6.
I found out that the "PackageKit Update Applet" seems to be responsible for running the auto-update. It can be enabled or disabled in the new Preferences/Startup Applications control panel. There is also the "gpk-prefs" control panel to set the update interval to "never". However, both control panels work on a per-user/login basis and cannot be used to disable yum auto-update system-wide.
Finally I found /etc/PackageKit/PackageKit.conf, which has a DefaultBackend parameter, but I don't know what I should put there.
Is there here a way, to disable the yum auto-update system-wide without uninstalling PackageKit?
I already checked the documentation at http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/ch-PackageKit.html but it was not helpful.
Thanks!

The actuall problem I'm trying to fix is the following error:
<pre>
Another app is currently holding the yum lock; waiting for it to exit...
The other application is: PackageKit
Memory : 45 M RSS (357 MB VSZ)
Started: Tue Jul 10 09:27:04 2012 - 04:09 ago
State : Sleeping, pid: 2317
</pre>
The above error can happen if you have an active Gnome session and e.g. connect as root using ssh session and try to use yum.
I may have found a way now to disable the automatic system updates, however, I don't know if this is the proper solution since I cannot find any information about it.
I modified */etc/PackageKit/PackageKit.conf* and changed:
<pre>
DefaultBackend=yum -> DefaultBackend=nobackend
</pre>
It requires a re-login of your Gnome X session to take affect.
Then Administration/Software update does no longer scan for updates, and apparently no longer lock yum at the system level. At least the problem seems to be fixed globally that way.
I will mark this question as answered, but any ideas are still welcome.
Thanks!
Btw, here is a link to previous older thread to disable it on a per-user basis:
Disable PackageKit Update Applet

Go from manually update to auto-update without losing songs?

I was trying to delete some podcasts from my ipod, and was following the directions on the help menu which told me to go to preferences and choose manual update, then delete. I tried it, and it didn't work. When I decided to go back to auto update, I received a message that everything on my ipod would be deleted and the update would be just what is on the itunes on that machine. I have more than one computer, and have itunes on each one. There are different songs on each computer. If I go to manually update on this computer, it will erase the songs I've put on from other computers. All this and I still have the unwanted podcasts. Can anyone help me to go back to auto-update without losing songs? If worse comes to worst I guess I'll have to update, lose the songs, and then re-update at my other computers. thanks.

Afraid that's not possible. If you go to auto-update, the iPod gets cleared and replaced with the current contents of the iTunes library.

Broken WRTU54G-TM 1.00.21 Auto Updating

Similar Messages

Maybe you are looking for