Broken XControl - Owning library has blocked execution of the vi

Good Day,
I need help to understand how to fix the attached XControl.
It gives the error Owning library has blocked execution of the vi and all the sub-VI in the XControl library are shown as broken.
I suspect that the issue is in the definition of the Data and State abilities, but I have not been able to fix it in any way.
Any help would be really apreciated.
Thanks
Attachments:
TableDB.zip ‏249 KB

Hello FSFirenze,
I made a bit of research for the error you receive and I found something that might be of assistance. Can you please tell send me a screenshot with the error so it's more clear for me?
This error is typically caused when the .lvclass file is not updated to properly reflect the VIs it contains. This is usually caused by manually moving class VIs from their proper directory instead of doing it from the project, but it can occasionally happen when many changes occur in the class at one time.
To resolve the issue, you will need to modify the XML in the .lvclass file:
Close the project containing the LabVIEW Class.
Right-click on the .lvclass file in Windows Explorer and open with Notepad.
Browse the XML file. Each class VI should be contained in <ITEM></ITEM> tags. Locate any class VIs that should no longer be a part of the class.
Delete all XML code for the unnecessary VI defined between (and including) the <ITEM> tags.
Save the .lvclass.
Reopen the LabVIEW project.
Was this helpful?
Ciao!
Antonios

Similar Messages

HT1391 All the music in my itunes library has vanished apart from the purchased items? why has this happened and where has it gone? It is no longer on my iphone or on my computer??

All my music in my itunes library has vanished apart from the purchased items! It is not in the music > itunes > itunes media folder, I've searched the entire system for mp3 and nothing. Why has this happened and where has it all gone?

http://support.apple.com/kb/HT1329

HT1459 My Itunes library has 700 songs. The Ipod Shuffle is 2 GB. How many songs will that hold aproximately.

My Itunes library has 700 songs. The Ipod Shuffle is 2 GB. How many songs can I get on the Shuffle...aproximately?

To see the exact size of your library, simply look at the status bar at the bottom. If you don't have a status bar, enable by going to View > Show Status Bar.
If you want to fit more on the iPod, use the capability to "Convert higher bit rate songs..." as shown below. If you set this to 128, you can fit around 500 4-minute songs in 2GB.

My itunes library has exclamation marks on the whole of my music collection I have to upload my CD's again! does anyone know why and what can I do?

Help, my itunes library has exclamation marks and will not play. Do I have to reload my cd's?

What do you mean by what audio/video formats are involved? These are all files from several digital cameras.
As previously stated, AVI is a file container. It is somewhat old and its originator, Microsoft, dropped official support of it over a decade ago. However, it remains popular with PC users since almost any valid audio and/or video compression format can be stuffed to the file which synchronizes the content by interleaving the individual audio and video frames. The compression format is the specific manner in which the audio and video data are encoded as it is placed in the AVI container. You can find the compression format by inspecting the file in the Finder "Info" window, or in the "Inspector" window of the QT player (or other media player) if the file can be opened.
For instance, one popular compression combination would be to place DivX encoded video and MP3 audio in an AVI file container. However, neither DivX nor MP3 is natively supported by the QT player. (Although iTunes will natively support the MP3 audio.) Therefore, people who wish to play such files in the QT 7 Player would normally install either the DivX component or Perian but not both. Either installation will independently play such files in the QT Player, but if both are installed, the file will usually stop working since these two codecs can create a playback conflict.
However, the AVI container could just as easily contain DV along with DV audio. In this case, the file should play correctly in QT since this compression format is natively supported by the basic component configuration that comes in every current OS installation. Therefore, if such files suddenly stopped playing, this could be an indication that a component has been moved or deleted or that your system or QT embedded structure has become corrupted.

Why is my account being blocked from buying diamonds inthe iron force game. I am trying to buy the diamond mine for $ 99.99 and the system has blocked me for the past 3 days and itunes has not resolved the blocking problem. I see many other complaints her

Why is itunes blocking my and others accounts from buying diamonds and cash in the iron force game. I have been blocked for the past 3day April 28_29_30from being able to buy the diamond mine 1650 diamonds for $ 99.99 and another package of diamonds for $ 49.99' this looks like the old bait an d switch game where a great deal is offered and then you adore forced to buy something less expensive. I have been in computer business for over 30 yrs and all iyunes needs to do is reset the accounts on their system yet they don't want to do that. Also of note I was allowed to buy small amounts of diamonds only to see that some were taken from my account when I was signed and no message as to why this was done. I had 1230 diamonds and did. Not play the game an the next thing was I had only 1170 diamond?.? What's that all about. Itunes is not respecting customers or. Good business practices. And very. Stupid for not selling uds , the customers the products so itunes can really make more money. I have spent many hours on the phone to resolve this only. To get the run around
Nd. Come on itunes reset set our accoummnts and let us buy. We will all have more fun and you get more money. Can't remember ber the last group who turned their back on nmoney but itunes you are the best at doing that fix things pl ease

http://www.apple.com/support/itunes/contact/
Contact iTunes and ask them. This is just a user to user forum so no one here has any ability to answer your questions with anything but a guess.

HT1451 All my iTunes library has disappeared in to the Cloud.

I though it just backed it up and you could simply delete from your computere knowing that music you currently aren't interetsed in was still stored out there. It cleaned me out! I travel a lot overseas and don't connect to the net all the time so the great idea of downloading songs at leisure is useless. I was shocked to find my itunes library empty! I want it all back on my Macbook Pro please!

"I though it just backed it up and you could simply delete from your computere knowing that music you currently aren't interetsed in was still stored out there."
Why did you think that?
Your library will only be where you put it.
Icloud allows you to redownload some itunes purchases in some countries.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Have you failed to maintain a backup copy?

My itunes library has multiple repeats of the same album

How do I condense the itunes library to only show the album once and move all the tracks under the same album ?

Generally setting a common Album title and Album Artist will fix things.
For deeper problems see Grouping tracks into albums.
tt2

After a library has been created with the "Copy items to the iPhoto library" option unselected, can it later be made to create those copies?

iPhoto 9.4.3
iPhoto Library Manager 3.6.8
MacBook Pro - OS X 10.7.5.
I have a large number of iPhoto libraries, organized with iPhoto Library Manager, that I created with the "Copy items to the iPhoto library" option unselected because I wanted easier access to the individual files. I am now going to be migrating to a new computer and have run into some problems with iPhoto losing the path to the file, and as a result showing me the exclamation point of doom. What's more, the program doesn't seem very intelligent about rebuilding those lost connections, and I have to go back through and correct it manually almost one at a time. How do I get around this problem?
If I rebuild my new computer from a Time Machine backup (I usually enjoy taking this opportunity to start from a clean slate, but...), will the paths all be preserved without me needing to abandon my organization system?
Or is there some way to ask iPhoto or Library Manager to create and organize copies of all the photos in the library that are not currently present within the library?
On a tangentially related note, what's the best way to save keywords (and ideally also faces) added in iPhoto to the photos' meta data?
Much obliged.

Not with iPhoto by itself. If you have the lastest version of Aperture and iPhoto referenced libraries can be converted to managed with Aperture.
You can convert to a managed library with iPhoto Library Manager by rebuilding the library with iPLM. This will create a new, managed library with all your photos in it and with all Events, albums, keywords, titles, descriptions and places intact. However, books, calendars, slideshows and cards will not be retained. They will end up as albums containing the photos.
OT

LVOOP %27owning library blocked execution....%27

Hi All
I am working on a project using LabVIEW 8.5.1 (specfied by the customer not me!) and am having trouble with some LabVIEW classesI have created. I have created three classes - a parent class is a 'generic DAQ class', and card specific classes that inherit from the generic class overridding all methods. However I get an error that I can not get rid of... 'the owining library has blocked execution'. This is for all VIs and the class data types. I have opened the library using LabVIEW 2012 and 2013 and I do not get the same problem in either of those. Any thoughts?
David
www.controlsoftwaresolutions.com
Solved!
Go to Solution.

I have found the issue. One of the overridng methods of one of the child clases did not have the 'dynamic dispatch' output terminal wired correctly - newer versions of LabVIEW must handle this better.
David
www.controlsoftwaresolutions.com

Library Sharing blocked by firewall despite settings

Just updated to iTunes 10.5 on my "first Intel generation" iMac, which runs 10.5.8.
Library sharing worked previously (iTunes 10.4.something), but now my other Macs and iDevices can 'see' that the library is there to be shared, but cannot access any content. The appfirewall.log shows:
Firewall[42]: Deny iTunes connecting from 10.0.1.5:55709 uid = 0 proto=6
whenever I try to access it from another machine/device.
Meanwhile, the Firewall settings in the Security pane of System Preferences show iTunes.app with "Allow incoming connections".
I have tried:
- adding and removing iTunes.app from the Firewall list of apps
- restarting the system
- turning off library sharing within iTunes and turning it back on, including re-naming the library
It continues to fail the same way every time.
Has anyone else encountered (and hopefully solved) this problem?

Yes I have been struggling with this for months.
I have concluded that the firewall is broken and simply needs to be avoided, turn it off, don't use it. Adding iTunes to the allowed list should work but it doesn't. Look at your logs, you'l see the many instances of the firewall blocking itues access even though you have specifically told the firewall to allow it.
Annoyances like this destroy the Apple myth: "It just works."
Scared of opperating without a firewall turned on? Get Lil Snitch and use that instead. The Apple Firewall doesn't work anyway, we've seen that as described above. So how can you be sure it is blocking any nasties? You can't. Turn it off and your problem is solved.

My Itunes Library has become (Damaged)

My Itunes Library has become (Damaged), there is no previous itunes Library folder to chose a backup from. None of my media is showing in itunes but it is still in the relevant folders within the itunes folder, how do I get it back into iTunes! iMac, Itunes version 11.1

No it is not broken links, they are not their period. Yeah i think iTunes thinks that i already own those films for some reason and i can download them again because it cant see them in my library.
If they are not there period then you have to add them yourself as I have said twice already.
iTunes is picking up your computer authorization and AppleID login into the Store and telling you you have content not in your library (the database iTunes uses, not what is actually on your computer as files which iTunes completely fails to see). It is showing you have content to download.
I think it may be to do with where the ITuned Media folder is directed to in the preferences. I just checked it and it seemed to have changed itself to an Itunes folder on my local HDD, not my network drive.
I tried to change it to the root folder in my network drive, but it still hasn't populated the media into iTunes ...
Changing preferences will not get iTunes to inventory the media folder. Changing preferences simply tells iTunes that is where you want ot store any new media added from that point on.
I'm not sure if the file directory is correct. My root folder on the network drive is named 'iTunes Library' within that folder I have music, books, movies folders etc, but there is also one named 'Itunes Media' with an 'automaticaly add to itunes' folder inside that, but that same 'automatically add to itunes' folder also exist within the root folder...
Its like it thinks all my media should be in that iTunes media folder, but its not, its in the top level folder above that. You would think I should just be able to point ITunes at that folder...?
You have residual pre-iTunes 9 media structure as well as the new structure. If everything was working I'd tell you to consolidate/organize to update it all. As it is since you will have to add all media to your new library it should do it anyway.
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/docs/DOC-7392

I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I have no access ...

I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I have no access ...
HELP HELP

To confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running.

Itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?

ive recently updated, itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?if i transfer the movies from the external to the laptop they will add to the library without any problem so theres no issue with the laptop but when i go to add file in itunes i can path to the external but as soon as i select the file nothing happens, just goes back to itunes

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

My built in webcam has stopped working on Skype following an update. Does this mean my macbook air has blocked videochat on skype? How can I fix this problem?

Hi, my built in webcam has stopped working on Skype following an update. Does this mean my macbook air has blocked videochat on skype? How can I fix this problem?

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

How to connect to a network that has blocked Mac addresses?

My school has blocked Mac addresses how do I get around this?

lllaass already answered, and JakeStebbings provided as helpful a suggestion as possible.
You might as well mark your own response as "answered" and move on:
That's impossible.

Broken XControl - Owning library has blocked execution of the vi

Similar Messages

Maybe you are looking for