Brother HL-2270DW no longer works on 10.8.2

Can someone please advise why two Brother printers can no longer connect to their respective macs?
I have Bother HL-2270DW on OSX 10.8.2 that stopped working today for no reason. The printer appears to be offline. I have tried everything and spent hours on Brother and Apple websites, downloaded, reinstalled but still nothing.
My mother's Brother inkjet is having the same problem on her iMac 10.4.11. The system just can't find the printer - nothing had changed between printing a couple of days ago till now.
Is it me? Both printers are pretty new so who is mucking up the settings???

Thanks for your help.
Spoke to Brother again. No reason for the crash.
Plugged the iMac into the printer via ethernet, added new printer and removed old printer settings. the laptop found the nearby printer so all is good.
This helped
http://host220.brother.com:8080/sap%28bD1lbiZjPTAxMA==%29/bc/bsp/sap/zsdb/displa y.htm?SOLUTION=200000032816
Now to fix the mother's printer.

Similar Messages

HT204135 I have installed Mavericks on my Mac, but mt Brother MFC-425CN no longer works. Any solution?

I have installed Mavericks on my Mac, but mt Brother MFC-425CN no longer works. Any solution?

Thanks Paul.
I'm connected by USB cable. Tried looking for a Brother driver download but they do not provide one for this printer.
If I delete all listed printers for the purpose of then doing a reset, will I not lose them all - as there is seemingly no appropriate driver - and finish worse off than I currently am?
Regards
Ephry

My Brother label printer no longer works

After my last update to Maverick my label printer stopped working - it kept shutting down. I tried to uninstall/reinstall and now I get this message when I try to open the installation program "You can’t open the application “P-touch Editor5.0 Installer” because PowerPC applications are no longer supported."
Help!

If you cannot update your printer driver to Mavericks:
Revert your Mac back to the System it was using prior to the Mavericks upgrade (presumably Snow Leopard).
Then partition your hard drive or add an external hard drive and install Mavericks there!
DO NOT install Mavericks over Snow Leopard, as it will destroy the Snow Leopard environment.
Use "dual-booting" (System Preferences:Startup Disk) to boot into either Snow Leopard or Mavericks as needed. Print in Snow Leopard.

Flex 2-15 Keyboard/Trackpad no longer working

Basically the keyboard/trackpad are no longer working for my lapop (Flex 2-15).
Here's the run down of what I know:
1) Function keys still work such as brightness up or down and turning off the screen.
2) In device manager there is the yellow traigle with an exclamation point for the trackpad, but the keyboard driver seems functioning properly.
3) On the mouse driver it says Code 10, timed out.
4) I've tried uninstalling the mouse driver and restarting to see if windows would install automatically, and the driver comes back, but with the same code 10.
5) Touch screen works fine.
6) Running Windows 8.1.
7) Tried restoring from factory settings and the issue is still here.
8) USB mouse and keyboard work perfectly fine.
9) Tried switching modes to see if keyboard/trackpad was disabled, but no luck there either.
Greatly appreciate some help here as this is beyond frustrating since I've only had this laptop for a little over a month and can no longer return it. Also Lenovo doesn't support anything besides hardware and wants $70-140 to troubleshoot this issue.
Thanks!
Solved!
Go to Solution.

They were trying to charge me for a "Software failure" which apparently isn't covered. I'm almost positive it's driver issues of some sort that they needed update seeing as the function keys work on the keyboard but the rest dont because the trackpad doesn't work.
But if they're going to try and charge me for a software issue I might as well get them to replace the keyboard under warrenty just to rule that out. Sucks it's only been a little over a month.
I purchased the laptop from Newegg.com since it was the cheapest I could find. They only do a 30-day refund/replacement unless you paid for extra insurance (which I never do since usually I can figure out most simple laptop issues).
I usually just turn off this laptop as it's not my main one, but one I'm going to lend to my brother. And one day the keyboard was working fine and then the next day I turned it on I had issues. Worked fine for the few weeks leading up to it. I've updated windows a few times, but none of the updates were keyboard related and factory restoring didn't work so I'm at a loss.

Opened Powerbook - Now Keyboard No Longer Works :(

Hi all,
my brother asked me to upgrade the HD in his PowerBook G4 1.25Ghz. I followed instructions on iFixit and it all went well, apart from reattaching the keyboard ribbon cable. The logic board has now become damaged because one of the two clasps on either side of the plastic bracket securing the ribbon cable from the keyboard has snapped off. The ribbon cable doesn't seem to hold securely anymore and the keyboard cannot be used. The take-apart guide was a bit unclear about this; what I have is a ribbon cable with a completely stripped and exposed end which slips into a plastic bracket on the logic board and is then wedged in by a separate plastic cross-bar which clips in to the bracket using the 2 clasps at either end. Despite the fact that one of these clasps has now snapped off the ribbon cable looks like it’s pretty firmly wedged in (although it seems an uncharacteristically poor design on Apple’s part) and I’ve made double sure with a little strip of tape. I can’t see how it could be held any other way, however clearly it’s not working as the Powerbook keyboard no longer works and I have to use a USB keyboard.
I can’t figure this connection out as it looks so makeshift compared to other cables and sockets I’ve seen on Apple logic boards. Anyone have a solution to fixing this ribbon cable in so that it’s making full electrical contact as intended?
Thanks!

OK, thanks. A new logic board seems such an extreme solution, but it may be the only thing left to try
The thing is I can't really see what it is that isn't making contact with the ribbon cable. I know the clasp on one side is gone, but despite this the cable is just as firmly wedged in and tape applied over the top to ensure it doesn't ever work loose. I've re-done the connection 4 times now in the hope of making the keyboard work... but nothing. it's a real head-scratcher! You would think that simply inserting the ribbon cable into the slot would be sufficient to make electrical contact, at least for a while; and that the clasps are there just to make sure it doesn't become detached over time.... but it doesn't work no matter how hard it's pushed in!
I don't suppose anyone has a close-up picture of the connection? I want to see if I'm putting it in right. thanks!

Favourites no longer working in maps iOS 8.1

have recently upgraded to iOS 8.1 and discovered today that my old bookmarks, now become favourites no longer work, when you select the favourite, ipad just does nothing, used to drop a pin and you could check directions. I use this mapping app as my main sat Nav these days, it was brilliant, but now seems to be broken, are Apple aware and is this going to be fixed soon.....?
how do I place a support call on this to Apple?
thanks

iPad Air running latest iOS 8.1.1
Brother MFC-L2740DW bought last week.
Problem: AirPrint does not work.
Verified that the printer and iPad are on the same network. iPad occasionally actually sees the printer. When it does, it tries to do something for 30-45 seconds showing a rotating progress-wheel right next to the printer's name. After that period, sometimes you would see the print button highlighted and you can press - still the printer won't actually print). Sometimes you get this message "printer no longer available".
The printer came with firmware version A.1.B, I updated to firmware version D.1.B after seeing problems, but AirPrint still did not work.
Reinitialized the printer's wifi many times (using the USB port, using the onscreen menu...). No luck.
Power-cycle printer, power-cycle iPad.. no luck.
I made the iPad forget the wifi network and rejoined. No luck.
Rebooted the wireless router and that fixed the problem temporarily. The printer went to sleep and then iPad didn't see the printer again.
I have contacted Brother Tech Support in email and sent an update with the link to this thread so that they can watch this page too. So far no luck. From watching all the posts above, there is definitely a compatibility problems with the latest iOS version and also Mac OS X.
The same problems exist on Mac OS X 10.10.1 also. Windows laptop has no problems whatsoever on the same wireless network.
Clearly there is a compatibility issue for at least some of the Brother printers. wifi-router is not the problem - Windows laptops have no issue with this printer over the same wifi network exactly at the same time when iPad/Macbook have issues.
Brother and/or Apple should fix this issue asap.

Cannot print to Brother HL-2270DW after loading mavericks

Cannot print to Brother HL-2270DW after loading mavericks

I got the 9840 working. I installed all the latest drivers (still no joy) but then I went into the Preferences, uninstalled the printer by simply highlighting the printer and selecting . I then closed the prefs, went back in and added it back . **** if it worked in Word immediately.
I agree with most - this has been a very unApple-like experience - hopefully not a harbinger of things to come.

PCS no longer working with contacts and 6086

I have applied the latest release of PC Suite 6.84.10.3.
Previously the installed level was 6.83.14.1
The send/read/write message still doesn't work but hangs the Windows Explorer for a while (this hang didn't occur previously)
But now, the contact facility no longer works. It is no longer possible to edit a contact, to store it locally or to send it to the phone even a message says everything is OK
(translate it from french: The contact has been well recorded into the phone)
Folder browsing still works correctly, either the phone folder or the memory card folder
Need a fix or a way to install the previous version, at least for the contacts...
This is a really negative feedback!
Phil

I guess what I learned is that sometimes the best solution is to do nothing and wait for the problem to solve itself! Funny, this has never worked for me before.
WOT is now working for me but often for only the first few rows of images. That's cool that it is also working with bing images.
Boudica, thanks for understanding. I am new contributor/ question-asker here on mozilla and may not understand how things are done. I was just frustrated, getting an email saying that my question was answered, logging in to find that it wasn't.
Now we have the functionality that we wanted, right?

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Link to A folder View in a PDF Portfolio - feature no longer working - please advise

Hi, I am no longer able to link to a Folder View of a PDF Portfolio:
Within a PDF portfolio i need to link from a PDF to a folder view in the Portfolio. I am using Link Action - Go to Page View.
This used to work for me - very important feature that no longer works. Please advise a workaround.
Steps:
1. Start a PDF Portfolio that contains files and folders
2. Open a PDF in the Portfolio
3. in the opened PDF click Add or Edit Link
4. Define a link area and set it to Go To A Page Vies
5. In the past i have been able to target a Folder View in the Portfolio - ie. direct a user not to a file, but instead to a folder view that contains relevant files. I would do this by setting the Target Page View to my desired folder view
6. This used to work in bringing a user to the folder view i specify. Now it does nothing. If i go back to the PDF and EDIT the Link i see this. File: Parent Document Page 1. This in fact does nothing.
Please advise, am i doing this wrong, it used to work. I have tried several workarounds, with no luck.
thanks!
Alejandro Collados-Nunez
Graphic Designer | Art Director
| e: [email protected]
| w: www.1lb.ca

There's an extension or two, or a combination of extensions which seem to be causing that in Firefox 6.0.2. One that has been mentioned is TabMix Plus.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
You need to figure out what is causing it, and disable that extension/s until they are fixed by their developer.

System password no longer works after 10.9.4 update

YOU CAN READ MORE ABOUT IT HERE:
Re: Issues after Software OS X 10.9.4 (13E28) upgradeRe: Issues after Software OS X 10.9.4 (13E28) upgrade
Same problem, here, updated, pw n longer works, HOW TO FIX? Can’t install anything, any ideas?
HERE IS MY ENTRSFO, HOPE IT HELPS:
EtreCheck version: 1.9.12 (48)
Report generated July 18, 2014 at 11:49:39 AM PDT
Hardware Information:
27" iMac (Early 2011)
iMac - model: iMac12,2
1 2.7 GHz Intel Core i5 CPU: 4 cores
16 GB RAM
Video Information:
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software:
OS X 10.9.4 (13E28) - Uptime: 1 day 11:8:27
Disk Information:
ST31000528AS disk2 : (1 TB)
EFI (disk2s1) <not mounted>: 209.7 MB
Macintosh HD (disk2s2) / [Startup]: 999.35 GB (59.06 GB free)
Recovery HD (disk2s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5690H
HGST HUS724020ALE640 disk0 : (2 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 2 TB
Boot OS X (disk0s3) <not mounted>: 134.2 MB
HGST HUS724020ALE640 disk1 : (2 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 2 TB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
FireWire Information:
LaCie d2 quadra (button) 400mbit - 800mbit max
EFI (disk4s1) <not mounted>: 209.7 MB
Snow Leopard Copy (disk4s2) /Volumes/Snow Leopard Copy: 666.67 GB (18.36 GB free)
Desktop Download(s) from iMac (disk4s3) /Volumes/Desktop Download(s) from iMac: 666.67 GB (60.95 GB free)
OS Lion (disk4s4) /Volumes/OS Lion: 332.71 GB (3.91 GB free)
Recovery HD (disk4s5) <not mounted>: 650 MB
MBP COPY (disk4s6) /Volumes/MBP COPY: 333.09 GB (164.16 GB free)
Avid Mbox Pro 400mbit - 400mbit max
Thunderbolt Information:
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files:
/etc/hosts - Count: 18
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[loaded] at.obdev.nke.LittleSnitch (4050 - SDK 10.8) Support
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[loaded] com.HGST.driver.GDOCKDriver (1.0.3 - SDK 10.7) Support
[loaded] com.avid.driver.firewire.mboxpro (1.3.0 - SDK 10.7) Support
[loaded] com.digidesign.iokit.DigiDal (10.0f56 - SDK 10.6) Support
[not loaded] com.line6.driver.xtaudio (7.3.6 - SDK 10.7) Support
[not loaded] com.line6.iokit.ClassicNotSeizeVariaxIF (1.0.1) Support
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.3) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
[not loaded] com.roxio.TDIXController (1.7) Support
[not loaded] com.wacom.kext.pentablet (5.3.3 - SDK 10.8) Support
[loaded] com.waves.driver.soundgrid (2.0.0) Support
Startup Items:
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Launch Daemons:
[running] at.obdev.littlesnitchd.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.line6.l6ksettingmgr.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] com.timesoftware.timemachineeditor.helper.plist Support
[running] com.waves.daemon.SoundGridProtocolService.plist Support
[loaded] PACESupport.plist Support
Launch Agents:
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.avid.mboxpro.helper.plist Support
[running] com.canon.MFManager.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.wacom.pentablet.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
iTunesHelper
SpeechSynthesisServer
uTorrent
G-Technology Assistant
Internet Plug-ins:
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Cannot contact Adobe
EPPEX Plugin: Version: 10.0 Support
iLokClientHelper: Version: 3.6 - SDK 10.5 Support
DivX Web Player: Version: 3.1.0.13 - SDK 10.5 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
RL Secure Plug-In Layer: Version: (null) - SDK 10.5 Support
MagellanPlugIn: Version: 1.2 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
Safari Extensions:
Conduit Search for Safari: Version: 1.0
Searchme: Version: 1.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
ConduitNPAPIPlugin: Version: 1.0 - SDK 10.6 Support
UploadManager: Version: (null) - SDK 10.5 Support
Google Earth Web Plug-in: Version: 7.1 Support
ContentManager: Version: (null) - SDK 10.5 Support
RocketEngine: Version: (null) - SDK 10.5 Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Java Support
Line6AudioMIDI Support
Mbox Pro Support
YAMAHA-USBMIDIPatch Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 875.71 GB
Destinations:
TIME MACHINE [Local] (Last used)
Total size: 1
Total number of backups: 3
Oldest backup: 2013-10-21 19:02:42 +0000
Last backup: 2014-03-19 11:19:09 +0000
Size of backup disk: Too small
Backup size 1 < (Disk used 875.71 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      2% SGProtocolService
      1% DashboardClient
      1% WindowServer
      1% fontd
      0% Safari
Top Processes by Memory:
999 MB com.apple.SpeechRecognitionCore.speechrecognitiond
459 MB DaisyDisk
360 MB mds_stores
180 MB Safari
164 MB Mail
Virtual Memory Information:
8.79 GB Free RAM
4.12 GB Active RAM
1.46 GB Inactive RAM
1.62 GB Wired RAM
1.76 GB Page-ins
9 MB Page-outs
Like Show 0 Likes(0)

Me again, THANKS FOR HE TALENS well it kind of worked, but I had one chance and have not seen it since but all the root, or iCloud, basically all keychains might have been rest to defaults, but if I try a password, it hakes and says incorrect, the apple id worked though?!?
NIGHTMARE AND NEED THI FOR WORK, last backup (from apples time machine, not sure how old.
Your or anyones HELP! is greatly appreciated!

IPod Apps no longer work, Music disappears, Fix?

QUESTION : How to fix permanently the “iPod Touch Breakdown“?
(seems identical to the iPhone “Breakdown“)
Since I upgraded to 2.0.2, running iTunes 7.7.1 (11) on a MacBook Pro G4, I keep having big trouble with Apps, Music and Films.
Here is what I call the “iPod Touch Breakdown“:
- Apps won’t start : the iPod would go back to the home screen after a few seconds.
- Music and Films disappear (My music consists essentially of personnal CDs).
- (for me Photos are still there)
- all original Apple Apps work OK
This is a known problem, also occuring on the iPhone with many posts on the iPhone discussions forum (see “iPhone“/“Installing and Using iPhone Applications“/“iPhone Applications no longer work“. At the time I write this messge, this question has been viewed 16,080 times ( ) (*) and there have been 319 replies: probably a sad record for a single question, which means that THERE REALLY IS A BASIC PROBLEM.
My iPod is a 8Gb purchased while staying in Pasadena, almost a year ago. I was extremely happy to use it more and more like a PDA (updates 2.0.1 and 2.0.2).
There have been some fixes proposed on the discussions forum (iPhone) that I tried and I have tried myself a couple more. NONE of them could fix the problem permanently: all fixes have been working for a day or two, no more. Untill you download an App (even an update) and you get the “Breakdown“ again.
As other users, I have noted a slowdown in anything I am doing (e.g. typing text) just before the Apps stop working and the music disappears. (see for instance Truth42 on iPhone Forum (Applications no longer work), Posted: Aug 25, 2008 10:57 AM)
Fixes: typically you get to disinstall and then reinstall all your Apps. Each time, you lose all your Apps parameters (bad for data bases and notes).
Two ways:
see iPhone forum: Aveonz Posted: Aug 24, 2008 3:16 AM :
1- sync using iTunes
2- in iTunes/Store: deauthorize your account
3- sync
4- authorize
5- sync (will re-load your Apps)
6- sync (to backup you new configuation)
(the whole process may take several hours; I have also done a reboot between 3 and 4)
(ii) proposed by various people :
1- deselect all applications
2- sync
3- disconnect your iPod and reboot it (pressing both buttons simultaneously for several seconds – see Apple site) (you keep you parameters, WiFi, etc)
4- select the Apps you want back
5- sync (will re-load your Apps)
6- sync (to backup you new configuation)
In the end you can use the Apps you have reloaded, but just for a few days (or hours)… until you cannot resist downloading a new App, or simply just download an App update. It won’t breakdown instantly after you do that, but it will very soon.
I certainly would take any procedure to fix this definitely. However, the best choice is probably to use as few third party Apps as possible (none is better) and wait for 2.1. Hopefully Apple is working on this, and we’ll get a definite fix very soon. This actually makes a very bad press for the iPod Touch and iPhone.
Sadly,
because I think iPod Touch and iPhone are beautiful machines –but for how long? Competition is tough…
Cheers
(*) about this number 16,080, obviously not all of the viewers experienced the “Breakdown“, but most were just curious to know. Still, the good question is to know how many of us, using the iPhone and iPod Touch experience this bug (virus?) and why some have it and not others (and in which proportion?).

Same issue here since updating to 2.0.2; Is there a way to back I wonder?
So I plugged back in my iPod touch and,...
0. make a note of all your music, movies, photos, apps selections to restore
1. cancel connect attempt to iTunes store (little 'x' in iTunes toolbar)
2. cancel attempts to sync or backup (little 'x' in iTunes toolbar)
3. clicked <OPTION>[Restore] once selecting my iPod touch device
4. navigate to <home>/Library/iTunes/iPod Software Udpates/
5. pick the prior update: iPod1,12.0.1_5B108Restore
6. then waited through iPod window status displays
'Preparing iPod software for restore...'
'Restoring iPod software...'
'Verifying iPod Software...'
7. OK the 'Your iPod has been restored to factory settings,...'
8. Ssync process did NOT automatically being so I unplugged & plugged it
(I did verify that 2.0.1 was loaded seeing the App Store)
9. Pick 'Set up as a new iPod'; don't pick an earlier backup point
(mostly 'cause I couldn't be sure which was a good failsafe).
10. iTunes then begin setup of my [ahem] new iPod.
STOP IT; it'll try and do restore everything. Then navigate the tabs for
your iPod and re-select those things you want (music,photos,movies,apps,etc)
So like any computer you need to keep proper backups.
The apple s/w system updater appears to do just that automatically, thanks! Of course it would've been nice to have had the 2.0.2 version tested a bit more before its release.
IMHO the host (mac) should have kept my prefs for the iPod rather than my resorting to handwritten notes but at least I'm back to normal. Consider when replacing an iPod how you'd want the replacement to be a mirror of its predecessor.
Oh, skip future requests to update to 2.0.2 until Apple can get his sorted out.
HTH
/los "I was a teenage net-random"

TS3771 My iTunes U no longer works since the update, an error message pops up saying that "This movie requires QuickTime, which is not supported by this version of iTunes." I followed the tutorial that suggests to change to from 64 to 32 bit and it didn't

iTunes U video files no longer work on my computer since i update to Mavericks. The following message appears on the screen "This movie requires QuickTime, which is not supported by this version of iTunes." I followed a tutorial that suggested to go to Applications/iTunes/Get Info and change to 32 bit. Now my iTunes does not open at all, it says it requires 64 bit. I am a bit confused and disappointed. What should I do to get it fixed? Buy a new MacBook?

Marcello, I am having the same problem. When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
I am running 10.9.2 on a mac mini.
I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

Itunes no longer works on ipad on version 6 software

My I tunes 10.6.1 no longer works with my upgraded software ipad 2 on version 6 stating my mac needs a higher operating system (currently on 10.5.8) to then upgrade I tunes 10.7. I can no longer use my ipad with itunes simply because I have an older mac operating system. An upgrade on the mac operating system is a lot of money . There is no roll back of ipad software from 6 to the original to cure this

The upgrade to the Mac is around $30.00 if it is still available. You need to upgrade to Snow Leopard 10.6.8 - I think that's the latest SL version.
I copied this from another discussion.
Apple said that customers can still purchase a copy of Snow Leopard or Lion from its online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).
Here is the discussion.
https://discussions.apple.com/thread/4140356?start=15&tstart=0

Itunes no longer works after latest update

I updated the latest version of iTunes. Now, it no longer works. Then my computer told me to update the latest version, so tried again, but again it didn' work. So in uninstalled iTunes and tried to install it again. It didn't work. I even tried with an older update after I had deleted the latest one and it didn't work. Now my computer tells me that some file or stuff was missing.
Thanks for any help!

...now my computer updated it again. It opened, tried to collect information about the copyright, the an error message popped up saying that iTunes does not work correctly due to any mistake...
Please help me!

Brother HL-2270DW no longer works on 10.8.2

Similar Messages

Maybe you are looking for