Brother MFC 7440N - cannot see printer on network after software update!

Hi I have done a software update to OSX 10.8.3 on my macbook pro. But now I can't see my Brother MFC 7440N printer on the network. I have been on the Brother website and have downloaded all of the software / drivers for MAC, but there doesn't seem to be one for OSX 10.8.4. Can anyone suggest what I should do next.
By the way, I have already tried to reset the printers etc, but that didn't work as the printer cannot be found on the network.

From the printer (check your manual)
In case you can't find the manual here is the relevant section.
You're not going to change it so stop at section 4 (IP Address) don't proceed to 5 (Change)

Similar Messages

  • My Apple TV does not see any wifi networks after 7 update.

    i Have recently updated my Apple TV to 7 and ever since then I cannot see any wiif networks. I can connect through wired connection and works fine. I have tried Apple troubleshoo page and nothing works. Any ideas?

    Hi, Cgomez8889.  
    Thank you for visiting Apple support Communities.  
    Here are some troubleshooting steps that I would recommend when experiencing this issue.  
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    Cheers, 
    Jason H. 

  • I cannot activate the IPhone 3G after software updating

    I cannot activate the IPhone 3G after software updating

    You might be interested in visiting this thread which discusses a similar problem: https://discussions.apple.com/thread/4673269

  • Unable to connect to wireless network after software update

    on updating the software on my Ipad 3 I am unable to connect to my office wireless network

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HP Printer goes offline after software update!@

    I'm having trouble with printer going offline on two of my computers:
    (imac 9,1 & 2014 macbook air)
    Printer: HP officejet 8500a Plus
    I repaired the permissions on both hard drives to see if it was a cups/communication issue and deleted and reinstalled the software/printer.
    This is really frustrating! any help or insight would be appreciated... I don't feel like code hunting tonight...
    thanks
    lk

    HP claims that model is Yosemite compatible
    http://support.hp.com/us-en/document/c04473034
    Try creating a new user with admin rights, log into that new account and reinstall the software and try printing from that account.

  • HT4623 join network after software update

    I have updated my software when plugging into Itunes. My phone said that there were just a few more stepts the first is about my network (wifi) i have done this but it keeps coming up as a screen message as 'could not find the network" but it is the correct password and username. could hyou help me please i can't use my phone until it is done
    Thanks

    Added icon to side bar. All is well

  • Scanning multiple pages with preview and brother MFC-7440n

    Hi,
    because of some problems with my old scanner after i installed snow leopard, i bought a new compatible one. It's a brother MFC-7440n with apple build-in drivers.
    When i start scanning to preview with more than one page, there will be a pdf document for every page. It doesn't matter if i choose "create just one document".
    First i wondered because in leopard preview multiple pages are displayed like in snow leopard. But this is wrong. There is one pdf file for every page.
    How can i change that issue? When i scan more than one page, i wan't one pdf document with multiple pages, not a pdf per page.
    Thanks a lot.
    Dominik

    Hi Dominik,
    What about Brother's scanner software? Do they have a scan program you can use to create multiple page documents? I have a Canon, and its software did that. The only other way is how I explained in my previous post. I have no issue using Preview for the simple document scanning I do. But if you have more needs, perhaps the Brother scan program should be installed.
    Brother has issued a scanner driver update on 9/10....
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/downloadindex.html?reg=us&c=us&lang=en&prod=mfc7440nall&type2=1&os=all&flang=all&dlid=dlf003973
    Also several other updates:
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/downloadtop.html?reg=us&c=us&lang=en&prod=mfc7440nall

  • I cannot see my wifi network but can see others

    i cannot see my wifi network but can see other networks
    anybody knows the soln

    Your wifi network is not working. Restart it. Delete your wifi settings for this network via System Preferences, Network, WiFi, Advanced. Reconfigure and try again.

  • I cannot remove old version of apple software update msi. says it's on a network that's unavailable. any ideas i cat properly install itunes.

    i cannot remove old version of apple software update msi. says it's on a network that's unavailable. any ideas i cat properly install itunes.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • After software update, I can see the songs on iPod nano in iTunes, but I cannot play/move the songs from iTunes.

    After software update, I can see the songs on iPod nano in iTunes, but I cannot play/move the songs from iTunes.

    Is the "software update" for iTunes 12?  Or something you did to the iPod?

  • HT4623 Why I cannot activate cellular data network after updating to iOS 6.0?

    Why I cannot activate cellular data network after updating to iOS 6.0?

    ok have a new Ipad a few weeks did this update and now poof nothing . have wifi but no Cellular Data seems its all ben wiped out, sat for over 1h came home after update and nothing but says i have full digicel  signal in the top courner have looked on net for help nothing has woked and digicel not open now here till monday.lets hope they sort this one soon. anyone else missing info in iPad: Tap Settings > Cellular Data ??????
    thanks

  • IPAD Why I cannot activate cellular data network after updating to iOS 6.0?

    Why I cannot activate cellular data network after updating to iOS 6.0? in fact all info in cellular has been wiped out ???? empty???  and why is it showing full signal in the top ???? any one got any help out there PLEASE      ????

    ok have a new Ipad a few weeks did this update and now poof nothing . have wifi but no Cellular Data seems its all ben wiped out, sat for over 1h came home after update and nothing but says i have full digicel  signal in the top courner have looked on net for help nothing has woked and digicel not open now here till monday.lets hope they sort this one soon. anyone else missing info in iPad: Tap Settings > Cellular Data ??????
    thanks

  • IPhone 3GS cannot access to 3G network after upgrading to OS 5

    My iPhone 3GS cannot access the 3G network after upgrading to OS5. I have checked with my operator and shows that their 3G network is working fine. Only cannot access through the phone. When I enable 3G, there will be no service for my phone. Wifi is working fine.
    Any idea how to resolve this?

    zlwczr wrote:
    Thanks, I will try this method. After restore and syn, will it automatically upgrade back to OS5? 
    No. If you have 5.0.1, then you will get 5.0.1 back. Restoring should still fix it though. I would prefer to have you back up to iCloud, because there are many known issues/errors when trying to restore via iTunes on iOS 5 or later.

  • My phone is still disabled after software update and i cannot seem to reset my passcode someone help me

    my phone is still disabled after software update and i cannot seem to reset my passcode someone please help

    Does the Ipod see the network?
    It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the  antenna. See:
    http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3

  • Can't connect to wifi network after iOS update

    Can't connect to wifi network after iOS update.

    This does not work in my case.
    Situation: we have wifi at home using WPA encryption.
    The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
    Now things stopped working again. Resetting network settings did not help either.
    The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
    That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again.

Maybe you are looking for

  • Lion 10.7.2 Sleep Issues

    1. I use a Samsung 2525w (wireless) printer and I constantly have to turn the print off and then on to reset the network connection after my MAC sleeps. 2. My USB connected Epson Artistan 800 throws my two external hard drives (one is timecapsule) of

  • HTTP Sender Adapter

    Hi, I have tried the HTTP client code that was given in many of the forums to post the messages into XI. It works fine. But this is good for testing. How does a HTTP real time client sending a message gets posted into XI without sender information? D

  • Several iPhoto libraries to one ?

    Hi Using iPhoto up to '09. (No Intel yet) Haveing several iPhoto libraries on several hard disks. I'd like to • make a new library and collect all photos/movies in the others to this • make it to identify doubletts and just import one of each and wit

  • Error in RCU for Identity Managment

    I am trying to create the schema for Oracle Identity Managment using RCU utility and I am getting following error: RCU-6083:Failed - Check prerequisites requirement for selected component:OIM Please refer to RCU log at C:\Oracle\Middleware\rcuHome\rc

  • Ipod classic will only show apple sign and a big red X when I try to do anything? What happened? How do I fix it?

    Ipod classic froze and after resetting it, will only show a grey apple sign and a big red X when I try to do anything. Don't know what happened. Don't know how to fix it. Tried everything it says to do in support. At this point I would be happy with