Brother printer not working after update

I downloaded OS X 10.8 and now my Brother printer MFC-J430w-2 will not print. I went to brother's web site and DL'd the drivers I think are correct but the computer wont let me open then. Any ideas? Thanks in advance!

I'm having the same problem with my imac plugged into the brother mfc-j430.  Worked yesterday and now after a update it doesn't print. Doesn't have any items in the que'ed list either.

Similar Messages

  • Printer not working after update on macbook pro

    After updating my Macbook Pro to the latest version, OS X 10.9.5 I now cannot print to my wireless printer which is a Canon MG6350.  The wireless connection to the printer is fine and the wireless connection to the Macbook is fine but they are not connecting together. 

    Without knowing what you updated from try:
    Get help resolving printer issues on your Mac - Apple Support
    OS X: Printer and scanner software available for download - Apple Support

  • Printer Not Working After Update

    I saw an auto update from HP that popped up and stated it was to correct current reading errors in the hp printer from the computer?  I NEVER update my printer hardly ever because I KNOW that HP has a reputation for messing up with messages about ink etc.  BUT, I went ahead with this one, just in case!  NOW my printer won't print anything from my laptop, and I am so pissed because I was in the middle of a printing project and my printer was working JUST fine until I did the update!  I swear, I will now have to go buy a NEW FRICKING PRINTER when it was working perfect a few minutes ago!!! GUESS WHAT, I will never by HP printers again!!!!  I have the HP Photo Smart Plus, and it is wireless, and it is about two years old, got it in around 2009.  It always says it's out of ink but yet continues to print just fine for several months over when it says I should replace the ink.  Hmmmmmmm.  Now this!!!!!   What am I supposed to do???  HP isn't going to answer this.  Looks like they set up this conversation to just get FEEDBACK from the public?   I don't have the time to wait for a response from the public or to try and call someone at some odd number and wait on the hold for two hours.  My job is in two hours and I needed my work printed before I went..     I     AM   PISSSSSED!!!!!  How can I ever TRUST  HP again!!!!!!  I could never do an UPDATE with you eVER!!!!!   YOU CRASHED MY PRINTER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!   Did I mention how mad I am?????   I am going to tell the world about this!!!  You know why??? You don't care, and you will just ignor this!!!!!   Norine Mungo

    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
    In the future please read this post then provide some details.  What printer model? What operating system? Are there any error messages on the printer or computer screen?
    Please be aware that this forum is a peer to peer support forum, it is not a direct link to HP support.  Likely if you had called HP your issue could have been resolved in one phone call....
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Print size in Photoshop CC does not work after updating

    Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
    I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
    Can anyone help please?
    thanks
    Fujibill

    Check the Image>Image Size and see what the print size is supposed to to be for the open document.
    Also, resetting the photoshop cc preferences might fix it.
    http://forums.adobe.com/thread/375776?tstart=0

  • Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

    After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

    but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
    Instead they are greyed out now.
    attached screenshot:
    Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
    Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
    So what you're describing is perfectly normal.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • HT1688 My Hot Spot does not work after update to 6.0.1.  Service is with ATT.  Apple says problem is with ATT, ATT says problem is with Apple.  Anyone else having this problem?

    My Hot Spot does not work after update to 6.0.1.  Any suggestions?

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

  • Click to activate does not work after update

    Click to activate plugin does not work after updating to version 23.0.1

    hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • 3G is not working after updating to iOS 6.1

    My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the phone etc.
    With this kind of bugs in every update, Apple will no more be THE Apple.
    There are bugs which have not been fixed even in the subsequent updates. SMSs going blank being one of them.
    Miss you Sir Jobs.....

    I have since managed to sort mine out - when the phone was updated it wiped out the network settings. 
    I was able to reset them by manually putting the information in:
    Settings - General - Cellular - Cellular Data Network and then I put in the correct details for APN, username and Password in the relevant sections and now it works OK.
    Hopefully it will work for others too

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

    My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

    Hi there Juicy Guava,
    You may find the troubleshooting steps in the article below helpful.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    -Griff W. 

  • Anyone else's iPhone 4s speaker not working after update to iOS 6.1?

    My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
    Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.

    As stated...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere

  • Iphone 4s Cellular data not working after updating to ios 6.0 .

    How to fix my cellular data, is not working after updating to IOS 6.0 ?

    Hey my wifi quit about a month ago,  and im running 5.1.1.  I thought the fix would be to download 6.0,  I guess not
    I have a 4s, first it was charging problems now this...argh!

Maybe you are looking for

  • Creation of text variants to be used in bex broadcasting

    Hello Can someone tell me the process of creating new text variants which can be used in the subject and content fields in the bex broadcaster Wizard. I can see some standard text variants there but need to create my own. Thanks

  • [Solved] X won't start on Acer Aspire V3-551G-8454 fresh install

    I'm not exactly sure if this is a problem with the switchable graphics, but X has so far failed to start every time. This is a new install, so I haven't gotten X to open even once before on this laptop. The errors I get in Xorg.0.log: (EE) fglrx(0):

  • Is it possible to move/copy my website content to a new template?

    I only learned the basic of Dreamweaver back in 2005, having completed a course in Dreamweaver MX 2004. This was the only way I knew of designing websites, so I created my first website using tables without using pre-designed templates or CSS. As a r

  • Oracle receiving workflow

    For the variance account the work flow is ACCOUNT GENERATOR where standard variance account is defined .In the same way can u please tell me which is the workflow which gets fires when receiving transaction is done.

  • Minimum permission set to create users

    I've created a user and also a group to create users using the plumtree server api and have assigned the group Create Users activity rights. Plumtree complains that the user doesn't have sufficient rights - what else is required? I'm trying to create