Brother Printer will now print the first or sometimes the second page of a four page document. Tried a different new Brother printer. Same problem.
In the past, the same printer would print only half of the first page of the email.
Now I am trying to print four page statements from Chase Bank online account.
Some style rules that work fine on screen cause problems for Firefox when paginating, with content sliding out of position, getting cut off, or generating extra pages. For best results, look for a special "printable" layout for your email messages. There may be a link for this, or an icon, or a menu items (e.g., on a ... menu). If it's a commonly used site, someone may know exactly where it is.
For statements, often these are in PDF format and you may get better results as follows:
* If you are using Adobe's PDF plugin, use its print icon (floating toolbar) instead of Firefox's print button.
* If you are using Firefox's built-in PDF viewer, try opening the PDF in your regular PDF viewing application instead of printing it from Firefox. You can use the download icon on the black toolbar above the document (below the regular toolbar area) to do that.
Similar Messages
-
Anyone know how I can 'fix' the Mac OS printer driver for the Canon 9500 Pro - all my text lines end up with the whole line being printed over the first character of the line of text when printing PDFs. It has ruined a lot of work.
I'd try this:
Delete the current printer (reset the print system) Mac OS X: How to reset the printing system
Delete all other Canon software and utilities from your computer.
Do a factory reset on your printer
Use Software Update to download the driver from Apple.
Don't reinstall any other Canon Utilities.
Make sure you don't have something mechanical stopping the paper from advancing.
If the problem is really the driver, then you could look in Gutenprint for a different driver. Gutenprint for Mac OS X -
When printing a highlighted (selected) print range from an internet item pulled up through Firefox, the first line of the selected range is not printing or is partially cut off. This is not an issue with my printer, as printer prints the whole selected print range when using Internet Explorer or Word Doc applications. The problem only happens when using Firefox. Please advise on how to fix this. Is this a settings issue or do I need to download and update? Thx
* [[Printing a web page]]
* [[Firefox prints incorrectly]]
Check and tell if its working. -
Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men
-
Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album. It will chnage the order of the songs on the album, and I can not switch them back to the correct order. This onloy seems to happen when I double-click on the song to play it in itunes. If I just hit play, this doesnt happen. As a result, I have several albums now in which the songs are in the wrong order. Its very frustrating, as this error then transfers over to my ipod every time I sync it. When I choose the info. for the songs, it has them correctly listed (i.e., it lists the songs as being #1 of 19 on the CD, for example). But then the song will have placed by Itunes as #5 of 19 for whatever reason. Itunes does not do this every time, but does it with enough frequency to be maddening. Any thoughts?
The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck. -
On iPad 3, all of my calendar items lasting more than one day do not appear correctly when looking at the monthly view of the calendar; only the first day of the appointment appears. For example, if I am taking a vacation for 4 days, only the first day of the vacation is marked on the calendar, instead of being listed on all 4 days. When I look at the weekly view, however, it is correct and is listed on all 4 days. The problem here of course is that at a glance, there is no way to look at my monthly schedule. On my iPhone, everything is correct, regardless of month or week view, so clearly this is an iPad problem I guess? Please advise on how this can be corrected. Thank you!
Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.
-
I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
I’m using a PreSonus Firebox audio interface.
It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard. I tried different midi controllers, different keyboards, different midi cords, and check midi preferences. The audio interface is working fine and is recogonized, but the midi doesn’twork. I re-started the computer several times and then finally it miraculously starts working again.
I’ve been having to this every day now. Any help or ideas is very much appreciated.I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.
-
Previously, when I got a message notification on my iPhone home screen, I could see the first part of the text. Now it just says "iMessage". How can I change this?
Settings > Notifications > Messages > Show Preview > On.
Also, check other settings on this screen.
Notifications can be a little confusing... this may help... http://www.imore.com/notification-center-ultimate-guide -
When viewing forums the cursor placed over the thread title would let me see the first sentence in the thread, now it is just a small blank box........any ideas?? Thx
Yassssss...................that did it............................thank you!!!
-
.. If the app is – in or out of background - (if in background NOT the first app) and the device locked – when you get a push message and DO NOT response straight away. let it fade off then, Later unlock, click the app icon (which will have a badge on it) and it fails to pop up my internal alert box and my notification message is gone(cannot get access to it in code).. other times it works . Including if you tap the messaeg from app centre. (this is all on a iPod 5.1.1).
Here is someone else with same problem http://stackoverflow.com/questions/7080266/receive-remote-notification-when-ios- device-is-locked-and-im-not-responding-immTell Apple
Apple - iTunes - Feedback -
I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?
I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm. -
I have a CS3 Creativ Suite. - I have uninstalled it fram XP the corret way. Now i have installed Windows 7 and try to reinstall the creative suite. It accept the first CD an the serial number, but when i get to the second CD it stop. Any one who can help?
If you have Windows 7 Pro you can try to install CS3 in XP mode.
-
Upon a fresh reboot the Firefox icon in the Taskbar will not work on the first click, sometimes it will not work at all and I need to go to Start-> then click the Firefox icon in the Start menu. Why is it that the icon won't start up on the first click?
Same issue - however firefox will open but I can not click on only of my tool bar shortcuts - the writing on the google age is greyed out so I can not click on anything. Still no resolution? I have deleted the folders and re-installed - it will open and then locks and it will not work????
-
how to erase the older apple id on my ipod touch because now it is in activation code but the first user of the ipod never response to my email
If you've encountered the activation lock, you cannot, and Apple won't unlock that device for you; it's an anti-theft measure.
(121797) -
How do I loop back from the first frame to the last frame?
Hi there,
I'm currently working on the framework for a product viewer.
I have:
a movie clip called 'viewer_mc' which contains the images take from different angles of the product. The actionscript generates a script on the last frame of this that returns it to frame 1.
a button instance called 'autoplay_btn' which plays through the movie clip from whatever the current frame is, and stops on frame 1.
a left and right button which serve to move the movie clip frame, to give the appearance that the product is rotating.
I have succeeded in getting it to:
have the movie clip play through once, return to frame 1 and stop.
have the buttons return functions when held down, that move the frame in the movie clip using nextFrame and prevFrame commands. The right button successfully loops round to frame 1 and continues functioning to give the appearance of continual rotation.
The last problem I am experiencing is getting the left button to act in the corresponding manner, going from the first frame to the last and continuing to function.
Here is my actionscript so far:
import flash.events.MouseEvent;
var lastFrame:Number = viewer_mc.totalFrames;
var thisFrame:Number = viewer_mc.currentFrame;
var backFrame:Number = viewer_mc.currentFrame-1;
1. This is the part that gets it to play through once before returning to the first frame. I think perhaps the problem I am experiencing is because of the 'viewer_mc.addFrameScript(lastFrame-1, toStart)' part i.e. although I'm holding the left button, its returning to this script and therefor getting bounced back immediately to the first frame. However, there is no flicker on the screen which you might expect if this were the case
Note - as this is a generic product viewer which I can use as a template I am using lastFrame etc. as opposed to typing the value in
function toStart (){
viewer_mc.gotoAndStop(1);
viewer_mc.addFrameScript(lastFrame-1, toStart);
2. This is the functionality for the autoplay_btn that will play through a rotation / return the viewer to the initial (frontal) view of the product (frame 1).
autoplay_btn.addEventListener(MouseEvent.MOUSE_DOWN, autoplay);
function autoplay (ev:MouseEvent):void{
var startFrame:Number = viewer_mc.currentFrame;
viewer_mc.gotoAndPlay(startFrame);
3. This is the functionality of the right button, which when held, moves the movie clip to the next frame via the 'rotateRight' function based on the 'nextFrame' command. It loops back round to the first frame due to the 'viewer_mc.addFrameScript(lastFrame-1, toStart)' script generated on the last frame of the movie clip, as is desired.
right_btn.addEventListener(MouseEvent.MOUSE_DOWN, rightDown);
function rightDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stoprightDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateRight); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stoprightDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateRight); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stoprightDown); //remove the listener for mouse up
function rotateRight(e:Event):void {
viewer_mc.nextFrame();
4. This is the functionality of the left button, which when held, moves the movie clip to the prev frame via the 'rotateRight' function based on the 'prevFrame' command. And this is where the problem lies, as although it works for getting the movieclip back to frame 1, it does not loop round to the last frame and continue functioning, as is wanted.
left_btn.addEventListener(MouseEvent.MOUSE_DOWN, leftDown);
function leftDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stopleftDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateLeft); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stopleftDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateLeft); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stopleftDown); //remove the listener for mouse up
I'd imagine it is probably my logic for this part that is really letting me down - I can do a similar function in actionscript 2, but am trying to learn actionscript 3 just to move with the times as it were, and struggling a bit. Still this is only a few days in!
function rotateLeft(e:Event):void{
if(thisFrame==1){
gotoAndStop(viewer_mc.totalFrames-1);
} else{
viewer_mc.prevFrame();
Any help you can give me would be gratefully received. For an example of the effect I am trying to achieve with the autoplay button etc. I recommend:
http://www.fender.com/basses/precision-bass/american-standard-precision-bassThanks for getting back to me.
Here's the code without my comments / explanations:
import flash.events.MouseEvent;
import flash.events.Event;
var lastFrame:Number = viewer_mc.totalFrames;
var thisFrame:Number = viewer_mc.currentFrame;
var backFrame:Number = viewer_mc.currentFrame-1;
function toStart (){
viewer_mc.gotoAndStop(1);
viewer_mc.addFrameScript(lastFrame-1, toStart);
//last image of viewer_mc = first image of viewer_mc
autoplay_btn.addEventListener(MouseEvent.MOUSE_DOWN, autoplay);
function autoplay (ev:MouseEvent):void{
var startFrame:Number = viewer_mc.currentFrame;
viewer_mc.gotoAndPlay(startFrame);
right_btn.addEventListener(MouseEvent.MOUSE_DOWN, rightDown);
function rightDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stoprightDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateRight); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stoprightDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateRight); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stoprightDown); //remove the listener for mouse up
function rotateRight(e:Event):void {
viewer_mc.nextFrame();
left_btn.addEventListener(MouseEvent.MOUSE_DOWN, leftDown);
function leftDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stopleftDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateLeft);//while the mouse is down, run the tick function once every frame as per the project frame rate
function stopleftDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateLeft); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stopleftDown); //remove the listener for mouse up
function rotateLeft(e:Event):void{
viewer_mc.prevFrame();
The definition of the rotateLeft function is where the problem lies I think - I've taken out my poor attempts at doing the logic from the previous post. If I were to write it out long-hand the statement I want to write is: 'If you get to frame 1 and function rotateLeft is called go to the end of the movie clip'.
The reason I have to use the viewer_mc.totalFrames-1 definition in the addFrameScript call is the addFrameScript function is 0 based i.e. if you want to call frame 1 of the movieclip you have to return a value of 0 in the addFrameScript (or such is my understanding of it anyway). As such, the last image in the movie clip will need to be the view obtained at 360 degree rotation, which is of course the same view as at 0 degree rotation. As a consequence, the last frame in the movie clip is superfluous for the user, but necessary for the overall effect to be achieved. And, in addition, to keep up the effect of a 360 degree view when the rotateLeft function is called it needs to skip that last frame to go to the lastFrame-1 (or totalframes-1), or in other words, the view of the image prior to completing the full 360 rotation.
the variables thisFrame and lastFrame are defined at the very top of the script. Like you said they might need to be defined or called on again elsewhere.
Maybe you are looking for
-
Podcast not showing up on desktop
For some reason, the Sept. 1, 2014 Podcast is not showing up in the desktop version of the iTunes podcast preview: https://itunes.apple.com/us/podcast/team-beachbody-coach-podcast/id455078215 It shows up fine in iTunes and on my phone. I validated th
-
Debugging Workflow in ESS/MSS module .
Hi, I know the stpes to debugging simple workflow and trouble shooting the same, but now I want to know the debuggibg workflow steps for workflow running with ESS/MSS module Framework, The scenario is Its actually Approving Forms in ESS/MSS module, T
-
Can you Choose a Particular Frame for Quicktime Icon Preview?
Is it possible to choose a specific frame for a Quicktime file icon preview? A lot of movies start out with a black frame and the icon preview in Finder is therefore a black square. I would like to be able to choose the frame to use for the preview.
-
PDF quality changes when output
The same PDF file is printed from various Macs and some print the file great and others cause the images to look low res. Every Mac has the same print driver. Why is this happening?
-
Free Month's Trial to Latin America.
Does this offer only cover the Countries listed, or can I call any Country? I wish to call Bolivia, but it is not listed. Thank you. Mike.