Browse Path Control: Selections Not Found or Displayed

Selecting the multiple Pattern: *.xls:*.xlsx below from Path Properties does not produce the required files I am looking for, can someone point me in the right direction? As you can see from the attached, Only selecting 'All Files (".") delivers the result I am looking for. I have already pursued the following link with the same results. http://forums.ni.com/t5/LabVIEW/Add-multiple-selections-for-pattern-label-in-file-path-control/m-p/2.... I have also tried using the File Dialog Express.vi and Open/Create/Replace File.vi.
Thank you for helping me address this issue.
Solved!
Go to Solution.

Using a semicolon instead of a colon works for me.

Similar Messages

Something similar to browse path control, but not quite

Hi all,
in my VI there is a 2D listbox. When I click on a line, in a subpanel a VI is loaded and data from listbox is written into controls in this subpanel. The VI in the subpanel then is finished.
A "browse path" control in the subpanel can be pressed, a new window is opened and I can choose a path, even though the subpanel VI is not running.
Is there an option to have a custom control, where I can open e.g. a new VI when a button is pressed? XControls don't seem to work or I am too stupid.
Thx in advance

Hi Tesla,
customize a boolean button to show the same image as the browse button of the path control. Then you can call your own subVI when that button is pressed…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

XML-22009: (Error) Attribute 'select' not found in 'xsl:value-of'

Hello,
I'm a long-time Siebel developer but novice to BIP, trying to enhance some complex rtf templates that an experienced xdo/bip developer (contractor) designed for us in the past, with a couple of new fields that have been added to the integration object.
All templates and sub-templates receive 'no errors found' when using add-in tool selection of 'Validate Template'. Unfortunately we cannot utilize the 'preview' capability due to the way the sub-templates are called, so only way to test is to upload into server and attempt to run real-time.
This results in UI error of SBL-OMS-00203, which when we dig into the xdo log file turns out to be:
<Line 648, Column 88>: XML-22009: (Error) Attribute 'select' not found in 'xsl:value-of'.
I have exported all templates and sub-templates into XSL-FO Style Sheet and looked at line 648 column 88, and none of them seem to correspond to this line/column combination (in fact most exports do not even go that high in lines).
Googling 'XML-22009' hasn't proven to be of much help, so reaching out to the xdo experts in this forum.
How are the line/column #'s determined in the xdo log output?
I am pretty sure that it must be some issue with my 'Main' template, since none of the sub-templates have been changed (and the current version of the report, without the new fields incorporated, still runs fine from the UI). In the XSL-FO format export of the (modified, with new fields added) 'Main.rtf' file, line 648 places it right in the midst of a bunch of hex which corresponds to an imbedded image (which was also part of the existing template, no change there) and that line only has 65 columns (i.e. doesn't even go up to 88), so I'm questioning how valid the Line/Column information is in the xdo log error message.
Any hints on troubleshooting this one would be greatly appreciated!
Thanks & Regards,
Katrina

Hi,
as I wrote in the inital message, we even left out the output method or used "application/pdf". The result is unfortunately always the same. And I still claim this is not a problem with the stylesheet itself, it has to do something with the mobile's environment.
Something I didn't tell: we have 2 servlets in our application, 1 responsible for output in html and 1 in pdf. The .fo stylesheet passed to the 'html servlet' is parsed correctly (and shows the source code, because it does not know about fo and conversion to pdf), the .xsl stylesheet passed to the 'pdf servlet' raises same exception/same line. You might tell us that there is a problem with the 'pdf servlet', but once again: why in online it is working?
Greetings and thanx very much for your precious time!

IPlanet 6.0 and struts (Extension of file not found, while displaying stati

i am trying to launch the strut appln in iPlanet 6.0 when i am making a reqest for jsp i am getting a message saying Error: 404 SC_NOT_FOUND
Extension of file not found, while displaying static content . i do not have any clue on this why i am getting this message.
Could anybody help me regarding this

Hello,
I am experiencing the same problem too. My jsp accesses a javabean. I
noticed, most of the times, I thought, it happened when session was timed
out. But it also happended before the time-out too. I had it set as default
at 30 minutes.
If you find out a solution or some high lights please let me know.
Thanks a lots.
ThuThien Ho
[email protected]
(703) 428-2856
Jordi Lucas wrote:
Hi all,
I have the following problem.
When I try to execute a jsp, the server responds:
Error: 404 SC_NOT_FOUND
Extension of file not found, while displaying static content
This problem doesn't ocurred with all jsp's, it seems that only ocurrs
with the jsp's that call EJB's or JavaBean's.
Anyone has encountered with the same problem?
Any idea?
We are using Iplanet Application Server 6.0 SP3 and IPlanetWebServer 4.1
SP7.
Thanks in advance !
Jordi Lucas Essi Projects
Ingeniero de desarrollo
[email protected] t +34 977 221 182
http://www.essiprojects.com f +34 977 230 170

Failed to instantiate file "v4.master" from module "DefaultMasterPage": Source path "v4.master" not found.

Brand new install of SharePoint 2013. No modifications. Made one collection from the Admin site.
I attempt to create a sub-site.
Sorry,
something went wrong
Failed to instantiate file
"v4.master" from module "DefaultMasterPage": Source path "v4.master" not
found.
David Jenkins

Hi David,
Here is the reference for using ULS log:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
Regards,
Rebecca Tu
TechNet Community Support

URGENT-System Copy 2004s (control.sql not found)

Hi everybody,
I am in the middle of an homogenous system copy (with installation method backup/restore) with oracle on windows. The SAP version is N2004s ABAB+Java.
I am doing this procedure with the Netweaver Guide for this type of copies, this time i have tried not to do my "standard" procedure which is to install the complete new system and after finished the complete new system install, then restore the source database and make adjustments at database level.
This time i am doing the "official" procedure. I have installed the oracle sw at the database host. I have installed the SCS instance at the scs instance with no problems. And... right know i am installing the database instance on the database host, selecting System Copy --> Homogenous Copy (Backup/Restore). I have restored the datafiles in the target database host and i have create the control.sql file and initSID.ora file from the source system with ora_br_copy.bat.
I am in the middle of the database instance installation, at this time sapinst have not created yet the OracleServiceNEWSID service in windows, i am assuming sapinst is going to create it (is it right???).
Ressuming, Righ now, Sapinst have stopped indicating to restore the backup (which i have done), and now i am continuing sapinst but i receive the message :
MDB-06020 File not found [CONTROL.SQL]
I don't know where sapinst is looking for the CONTROL.SQL script file, i have tried many locations, can you help me please??????
Regards,
Christian

I read carefully the system copy guide, there i found the paths:
control.sql debe colocarse en <sap_instdir> path, en mi caso "d:\program files\sapinst_instdir"
initSID.ora, obviamente debe colocarse en el "db_home\database", en mi caso "l:\oracle\SID\102\database"
The installation ran successfully. Sapinst created the windows oracle services, and ran automatically the control.sql script to create and start the new instance.
What a installation tool!!!
Cheers.

Method not found when displaying report in viewer CR Basic for VS 2008

I searched and couldn't find anything regarding this. When I try to display a report in the CrystalReportViewer, I get the following error message:
method not found: 'Void CrystalDecisions.Shared.PageRender.set_ExceptionWindowTitle(System.String)'
If I call PrintToPrinter for the report, it prints exactly as expected with no errors. The report viewer control is on a separate generic form (since I have many different reports) and the report is passed to that form after it has been generated.
I can't find any information regarding this error either on these support forums, or anywhere else on the internet. I've tried installing the latest service pack and also removing and re-adding teh crystal reports references to my project without any change.
Thanks for any help you can provide.

Ok, I tried a completely fresh install of Visual Studio 2008 on a brand new Windows XP machine, same result. I tried to do this on another developer's machine (who also has Visual Studio 2008 Professional), which resulted in this error when trying to load the ReportViewer (sorry for the long text). It mentions something about redirecting to version 12 of crystal reports in the error message, which is strange because my project references 10.5, and I don't have crystal reports 12, which as I understand is the full retail version of Crystal reports 2008. Any ideas?
A first chance exception of type 'System.IO.FileNotFoundException' occurred in ICE.exe
System.Transactions Critical: 0 : <TraceRecord xmlns="http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord" Severity="Critical"><TraceIdentifier>http://msdn.microsoft.com/TraceCodes/System/ActivityTracing/2004/07/Reliability/Exception/Unhandled</TraceIdentifier><Description>Unhandled exception</Description><AppDomain>ICE.exe</AppDomain><Exception><ExceptionType>System.IO.FileNotFoundException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.</Message><StackTrace> at ICE.basRpt.rpt_showPurchaseOrder(Int64 lngAuto, String strNothing, String strReportTitle, Boolean blnShow, Boolean blnExport, Boolean blnEmail, Int32 numAttachments)
at ICE.frmPO.mnuPrintPO_Click(Object eventSender, EventArgs eventArgs) in C:\_ICEDOTNET\ICE\Forms\frmPO.vb:line 2545
at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message&amp; m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message&amp; m)
at System.Windows.Forms.ScrollableControl.WndProc(Message&amp; m)
at System.Windows.Forms.ToolStrip.WndProc(Message&amp; m)
at System.Windows.Forms.ToolStripDropDown.WndProc(Message&amp; m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&amp; m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&amp; m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&amp; msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(ApplicationContext context)
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
at ICE.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 81</StackTrace><ExceptionString>System.IO.FileNotFoundException: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
File name: 'CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' ---&gt; System.IO.FileNotFoundException: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
File name: 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304'
=== Pre-bind state information ===
LOG: User = SAGENET\aingraham
LOG: DisplayName = CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304
(Fully-specified)
LOG: Appbase = file:///C:/_ICEDOTNET/ICE/bin/Debug/
LOG: Initial PrivatePath = NULL
Calling assembly : ICE, Version=1.0.0.40, Culture=neutral, PublicKeyToken=null.
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\_ICEDOTNET\ICE\bin\Debug\ICE.exe.Config
LOG: Using machine configuration file from C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\config\machine.config.
LOG: Redirect found in application configuration file: 10.5.3700.0 redirected to 12.0.2000.0.
LOG: Post-policy reference: CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304
LOG: Attempting download of new URL file:///C:/_ICEDOTNET/ICE/bin/Debug/CrystalDecisions.CrystalReports.Engine.DLL.
LOG: Attempting download of new URL file:///C:/_ICEDOTNET/ICE/bin/Debug/CrystalDecisions.CrystalReports.Engine/CrystalDecisions.CrystalReports.Engine.DLL.
LOG: Attempting download of new URL file:///C:/_ICEDOTNET/ICE/bin/Debug/CrystalDecisions.CrystalReports.Engine.EXE.
LOG: Attempting download of new URL file:///C:/_ICEDOTNET/ICE/bin/Debug/CrystalDecisions.CrystalReports.Engine/CrystalDecisions.CrystalReports.Engine.EXE.
at ICE.basRpt.rpt_showPurchaseOrder(Int64 lngAuto, String strNothing, String strReportTitle, Boolean blnShow, Boolean blnExport, Boolean blnEmail, Int32 numAttachments)
at ICE.frmPO.mnuPrintPO_Click(Object eventSender, EventArgs eventArgs) in C:\_ICEDOTNET\ICE\Forms\frmPO.vb:line 2545
at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message&amp; m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message&amp; m)
at System.Windows.Forms.ScrollableControl.WndProc(Message&amp; m)
at System.Windows.Forms.ToolStrip.WndProc(Message&amp; m)
at System.Windows.Forms.ToolStripDropDown.WndProc(Message&amp; m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&amp; m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&amp; m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&amp; msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(ApplicationContext context)
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
at ICE.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 81
</ExceptionString><InnerException><ExceptionType>System.IO.FileNotFoundException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.</Message><StackTrace> at ICE.basRpt.rpt_showPurchaseOrder(Int64 lngAuto, String strNothing, String strReportTitle, Boolean blnShow, Boolean blnExport, Boolean blnEmail, Int32 numAttachments)
at ICE.frmPO.mnuPrintPO_Click(Object eventSender, EventArgs eventArgs)
at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met)
at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)
at System.Windows.Forms.Control.WmMouseUp(Message&amp; m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message&amp; m)
at System.Windows.Forms.ScrollableControl.WndProc(Message&amp; m)
at System.Windows.Forms.ToolStrip.WndProc(Message&amp; m)
at System.Windows.Forms.ToolStripDropDown.WndProc(Message&amp; m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&amp; m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&amp; m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&amp; msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(ApplicationContext context)
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
at ICE.My.MyApplication.Main(String[] Args)
</StackTrace><ExceptionString>System.IO.FileNotFoundException: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
File name: 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304'
=== Pre-bind state information ===
LOG: User = SAGENET\aingraham
LOG: DisplayName = CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304
(Fully-specified)
LOG: Appbase = file:///C:/_ICEDOTNET/ICE/bin/Debug/
LOG: Initial PrivatePath = NULL
Calling assembly : ICE, Version=1.0.0.40, Culture=neutral, PublicKeyToken=null.
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\_ICEDOTNET\ICE\bin\Debug\ICE.exe.Config
LOG: Using machine configuration file from C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\config\machine.config.
LOG: Redirect found in application configuration file: 10.5.3700.0 redirected to 12.0.2000.0.
LOG: Post-policy reference: CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304
LOG: Attempting download of new URL file:///C:/_ICEDOTNET/ICE/bin/Debug/CrystalDecisions.CrystalReports.Engine.DLL.
LOG: Attempting download of new URL file:///C:/_ICEDOTNET/ICE/bin/Debug/CrystalDecisions.CrystalReports.Engine/CrystalDecisions.CrystalReports.Engine.DLL.
LOG: Attempting download of new URL file:///C:/_ICEDOTNET/ICE/bin/Debug/CrystalDecisions.CrystalReports.Engine.EXE.
LOG: Attempting download of new URL file:///C:/_ICEDOTNET/ICE/bin/Debug/CrystalDecisions.CrystalReports.Engine/CrystalDecisions.CrystalReports.Engine.EXE.
</ExceptionString></InnerException></Exception></TraceRecord>

Path in Classpath not found

Hi, all!
When I create a Web Dynpro-DC, I receive the following warnings:
[Warning]: Path in Classpath for file _webdynpro_model_dynamicrfc.jar not found.
and the same for all other Used DCs.
When I then rebuild the project, none of the referenced packages can be found.
Anybody got an idea?
Regards,
Thomas

Hi Thomas,
Are you building a local Web Dynpro DC with NWDS SP15? There's a bug in the SP15 installation: It "forgets" to copy all files starting with a dot (I have noticed that all .dcdef and .buildplugin are missing, I don't know if there are more dot-files). Because of this none of the local SAP standard DCs work. You can copy these files manually in a command prompt window. Makes sure you exit your NWDS before entering the command below while in the installation source folder that contains the "eclipse" folder.
xcopy *.dcdef "C:\Program Files\SAP\JDT" /s
Kind regards,
Pascal

Why is the FORM OBJECT selection not found in the Preferences/Accessibility selection?

Hello,
I am using the Dreamweaver cs6. I was wondering why the FORM OBJECT selection is not found in the Preferences/Accessibility selection?

The engineers removed it. Why? That's anybody's guess. You'll have to add them manually. Please refer to the HTML5 forms workflow video below:
http://tv.adobe.com/watch/learn-dreamweaver-cc/html5-forms-workflow/
Nancy O.

Ipad locked switch control "device not found"

I have an iPad that is locked. The message at the top says "switch control" and "device not found". Any idea how to access the ipad? It is not responding to the switch at all.

That sounds like there was an assistive device associated to the ipad at one time and is currently not connected.
Is there a small graybox with dark circle in it on the screen? If yes, Slect it, it will be the Assistive touch control.
again, this is a guess on my part.

SERVLET-fileext_not_set: Extension of file not found, while displaying static content

I got the above-mentioned error when the application tries to display a JSP
page. Any idea what it could be due to? I'm using iAS.
Christopher Lam

Hi All,
Sorry for the false alarm, I finally found out that this problem is due to
an exception in my bean which was not handled properly, resulting the JSP
does not know what to display. Now it is OK after the bean is corrected.
Thanks anyway.
Christopher Lam
"Christopher Lam" <[email protected]> wrote in message
news:9tfpon$[email protected]..
I got the above-mentioned error when the application tries to display aJSP
page. Any idea what it could be due to? I'm using iAS.
Christopher Lam

Control file not found

Post Author: vmt
CA Forum: General
I have a report that is written in Crystal Reports 8.5 It gets data from a SQL Server and compiled using Crystal Reports Compile and Distribution Utility (SCR8_distr_expert.EXE) ;
I am successfully able to run the executable when copied to my local drive but not as a link when it is copied to a virtual drive on a apache web server or infact any web server. We receive 'Crystal Report Runtime Error' popup box with a message 'Control file cannot be found';
Does anyone know a fix for this?
Thank you.

METALINK your best firend :)
the problem was I choose a wrong backuppiece. Command list backup summary shows such a output :
214 Full 145.97G SBT_TAPE 01:04:33 2010-01-27 22:11:40
BP Key: 214 Status: AVAILABLE Compressed: NO Tag: TAG20100127T210705
Handle: AIRBHD_1ul4hovr_1_1 Media:
Control File Included: Ckp SCN: 12944623718 Ckp time: 2010-01-27 21:07:07
SPFILE Included: Modification time: 2010-01-27 16:10:19
List of Datafiles in backup set 214
so I corrected the value and then RMAN restored controlfile correctly.
The only question is why such a strange error message appears :)

Object Browser Http 404 Page Not Found

Hi,
I have successfully installed Oracle XE 10.2.0 on Windows XP. I can access the Database homepage and I am also able to navigate to the following pages from there:
- Adminstration
- SQL
- Utilities
However any attempt to access the Object Browser page results in a Http 404 error.
I also tried installing Oracle XE 10.2.0 Universal but got the same error.
Any idea how to resolve this issue?
Below is the content of the log file
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
[ OCRUTL][2360]u_set_comp_error: Parameter was NULL
[ OCRUTL][2360]u_set_ocr_error: Parameter was NULL
2010-05-12 21:20:19.703: [ OCROSD][2360]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.
[ OCRUTL][2360]u_set_gbl_comp_error: Parameter was NULL
[ OCRUTL][2360]u_set_gbl_comp_error: Parameter was NULL
2010-05-12 21:20:19.703: [ OCRRAW][2360]proprinit: Could not open raw device
2010-05-12 21:20:19.703: [ default][2360]a_init:7!: Backend init unsuccessful : [33]
[ OCRUTL][2360]u_set_ocr_error: Parameter was NULL
2010-05-12 21:20:19.703: [ CSSCLNT][2360]clsssinit: error(33 ) in OCR initialization
[ OCRUTL][2360]u_set_comp_error: Parameter was NULL
[ OCRUTL][2360]u_set_ocr_error: Parameter was NULL
2010-05-12 21:20:21.703: [ OCROSD][2360]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.
[ OCRUTL][2360]u_set_gbl_comp_error: Parameter was NULL
[ OCRUTL][2360]u_set_gbl_comp_error: Parameter was NULL
2010-05-12 21:20:21.703: [ OCRRAW][2360]proprinit: Could not open raw device
2010-05-12 21:20:21.703: [ default][2360]a_init:7!: Backend init unsuccessful : [33]
[ OCRUTL][2360]u_set_ocr_error: Parameter was NULL
2010-05-12 21:20:21.703: [ CSSCLNT][2360]clsssinit: error(33 ) in OCR initialization
[ OCRUTL][6328]u_set_comp_error: Parameter was NULL
[ OCRUTL][6328]u_set_ocr_error: Parameter was NULL
2010-05-12 21:20:26.437: [ OCROSD][6328]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.
[ OCRUTL][6328]u_set_gbl_comp_error: Parameter was NULL
[ OCRUTL][6328]u_set_gbl_comp_error: Parameter was NULL
2010-05-12 21:20:26.437: [ OCRRAW][6328]proprinit: Could not open raw device
2010-05-12 21:20:26.437: [ default][6328]a_init:7!: Backend init unsuccessful : [33]
[ OCRUTL][6328]u_set_ocr_error: Parameter was NULL
2010-05-12 21:20:26.437: [ CSSCLNT][6328]clsssinit: error(33 ) in OCR initialization

As I indicated in a previous email - I am experiencing the same 404 problem on the Object Browser Button. I downloaded and installed Oracle XE on 13-aug-10 (windows 7 32 bit). I have not altered the APEX installation. I get the same problem with login under system or login under another user. The 404 occurs immediately I click the Object Browser and also occurs if I click a drop down from the Object Browser. I can use the SQL button OK - and have used SQL to create tables and insert data into them. I know that this has worked since I have looked at them in Microsoft Access via an ODBC link. But I cant look at them in Object Browser.
Any help would be appreciated

Page not found or displayed in the approve step

Hi all
when i am performing the approve step then i am able to do the mark as approved step. but there is no stop button is displayed for me when the approver wants to stop the task after marking as approved.
how to gets displayed the stop button in the UWL task. is there anything required to assign permissions??
Thanks
Regards
Sunil

Hi Sunil,
when i am performing the approve step then i am able to do the mark as approved step. but there is no stop button is displayed for me when the approver wants to stop the task after marking as approved.
how to gets displayed the stop button in the UWL task. is there anything required to assign permissions??
According to me,
You need to click on the Next Step. The Workflow will automatically reach the Stop step. It will not show as a button to be clicked. Go to the UWL and check the status of the Workflow. Hopefully you will find it as Stopped.
Hope it helps.
*Please reward points if helpful.
Thanks and Regards
Nitin Jain

Web browser activex control could not be loaded in compiled exe

Hi everyone.
I just met this issue again. Previously I solved this issue by registering the mscomctl.ocx, nicont.dll, nicontdt.dll in version 7.1. Now we are using 8.5.2, and the problem came up again.
I've tried the following:
1. use the latest nicont.dll,nicontdt.dll on the installed computer. http://digital.ni.com/public.nsf/allkb/4B0C1BBDA9CFEBE7862573D0005D93C4
2. tried to repair the run-time engine.
knowledge base http://digital.ni.com/public.nsf/allkb/5F06D38D61D883498625734800620168?OpenDocument
How do we enforce to repair the run-time engine of 8.5.2?
Thanks for any input.
Jun

Hello,
The instructions on the knowledgebase are correct. You need to open Add/Remove Programs and then select the entry for National Instruments Software and click change or modify (whichever option is present for you). You can then follow the knowledgebase and select your run-time version.
-Zach
Certified LabVIEW Developer

Browse Path Control: Selections Not Found or Displayed

Similar Messages

Maybe you are looking for