Browse structure MC02M_0ITM

dear all,
structure MC02M_0ITM comes from extractor 2lis_02_itm and by using rsa3 i can browse the 2lis extractor... but is there a way to browse a structure for MC02M_0ITM?
or structure cant be browse at all?

What do you mean by browse?
You can look at the structure in RSA5 (content). (2LIS_02_ITM)
RSA6, activated and enhanced. (2LIS_02_ITM)
LBWE, for all available fields. (2LIS_02_ITM)
SE11/SE16 - MC02M_0ITM.
Cheers!
/smw

Similar Messages

  • Inconsistency in the Dictionary for the structure "MC02M_0ITM".

    Hi Expert,
    we are applying ehp3 for ERP 6.0. I am getting the below abap dump DDIC_TYPE_INCONSISTENCY.
    Runtime Errors DDIC_TYPE_INCONSISTENCY
    Date and Time          29.08.2011 10:12:27
    Short text
         Inconsistency in the Dictionary for the structure "MC02M_0ITM".
    What happened?
         Error in the SAP kernel.
         The current ABAP "SAPLMCEX" program had to be terminated because the
         ABAP processor detected an internal system error.
    Error analysis
         There is an internal system error.
         eliminated with ABAP/4.
    How to correct the error
         The internal system error cannot be fixed by ABAP means only.
         You may be able to find a solution in the SAP note system. If you have
         access to the SAP note system, try searching for the following terms:
          "DDIC_TYPE_INCONSISTENCY" " "
          "SAPLMCEX" or "LMCEXTOP"
    I can see there is error on Table MC02M_0ITM:
    Table MC02M_0ITM could not be activated (E- Field ZZUNDTSORT in table MC02M_0ITM is specified twice. Please check )
    when I run the program RSDDCHECK in your system,  for check the structure "MC02M_0ITM".
    There is som error.
    Any Idea how can I solve this kind of error. Is it some repport for help this?
    Regards

    Hi Srikishan,
    Thanks for reply.
    There is just one field ZZUNDTSORT on talbe.
    When I try to check the table I get this log:
    Check table/structure MC02M_0ITM
               Check table MC02M_0ITM (REZ/29.08.11/11:14)
               Enhancement category 3 possible, but include or subty. not yet classified
               Field ZZAFHENTFORM in table MC02M_0ITM is specified twice. Please check
               Field ZZAFHKVANTUM in table MC02M_0ITM is specified twice. Please check
               Field ZZAFHTERMFRA in table MC02M_0ITM is specified twice. Please check
               Field ZZAFHTERMTIL in table MC02M_0ITM is specified twice. Please check
               Field ZZAFREGNDATO in table MC02M_0ITM is specified twice. Please check
               Field ZZAFREGNKVAMTUM in table MC02M_0ITM is specified twice. Please check
               Field ZZAFREGNMEINS in table MC02M_0ITM is specified twice. Please check
               Field ZZALTMATNR in table MC02M_0ITM is specified twice. Please check
               Field ZZALTMPRIS in table MC02M_0ITM is specified twice. Please check
               Field ZZANSOEGNR in table MC02M_0ITM is specified twice. Please check
               Field ZZANTHA in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_DUMMY1 in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_DUMMY2 in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_GRKERN in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_KNKERN in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_MELDR in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_OLIEIND in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_RENS in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_RENTFRO in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_RENTIL in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_TOR in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_TORTIL in table MC02M_0ITM is specified twice. Please check
               Field ZZBPROT in table MC02M_0ITM is specified twice. Please check
               Field ZZBUREN in table MC02M_0ITM is specified twice. Please check
               Field ZZBVAND in table MC02M_0ITM is specified twice. Please check
               Field ZZFORBELNR in table MC02M_0ITM is specified twice. Please check
               Field ZZFORFALDSDATO in table MC02M_0ITM is specified twice. Please check
               Field ZZFORVUDB in table MC02M_0ITM is specified twice. Please check
               Field ZZGJAHR in table MC02M_0ITM is specified twice. Please check
               Field ZZKONCEPTNR in table MC02M_0ITM is specified twice. Please check
               Field ZZLAESSELV in table MC02M_0ITM is specified twice. Please check
               Field ZZLAGERLEJDATO in table MC02M_0ITM is specified twice. Please check
               Field ZZLAGERLEJSATS in table MC02M_0ITM is specified twice. Please check
               Field ZZLAGERSATSDATO in table MC02M_0ITM is specified twice. Please check
               Field ZZLAGERSATSDATO2 in table MC02M_0ITM is specified twice. Please check
               Field ZZLAGERSATSDATO3 in table MC02M_0ITM is specified twice. Please check
    Regards

  • Changing the extract structure MC02M_0ITM

    Hi,
    When I am trying to change the extract structure MC02M_0ITM, I am getting the following error:
    "struct. from appl. 02 due to open v3 proc. not changed -> Long text" , "Message No. MCEX 140". All I was doing  was adding more fields from communication structure to extract structure and I am getting above error message. Can someone shed some light on that. Appreciate your help. Thanks.
    Wen.

    Hi Wen
    You have to
    1) Clear LBWQ Queues if you are using Queued delta
    2) Move all records from RSA7 - two times to BW under delta update call from BW - so that the records stored for repeat delta are also emptied
    3) Empty the statistical set-up table - LBWQ transaction in R/3
    then you can modify the structure in LO cockpit
    Arvind

  • Add field from structure maintanace option for datasource in LBWE (BI 7)

    Hi,
    while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
    but when we try to add extra field not by structure maintanace option in LBWE but form append structure option from that structure MC02M_0ITM ( that field is not in that maintanace option in LBWE) than it comes in that structure MC02M_0ITM and also can see in RSA2.
    Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
    Best regards,
    dushyant.

    It solved automaticaly,
    yes later i got that error entry still exit whic solved by deleting setup table and than try,
    thanks.
    one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
    Best Regards,
    dushyant.

  • IMPORT_ALIGNMENT_MISMATCH Dump while Adding fields in MC02M_0ITM in RSA3.

    Hi Experts,
       I need to add some Z custom fields in BW datasource 2LIS_02_ITM which we are doingby appending in structure MC02M_0ITM. I am activating structure and removing hide field check box also in RSA6 transaction. But when we are executing transaction RSA3 (Both Delta & Full load ) it is giving us IMPORT_ALIGNMENT_MISMATCH dump. we have removed all the queues from SMQ1 using program RMBWV302 before making changes. Please help me out in this. Following are dump details:-
    Runtime Errors         IMPORT_ALIGNMENT_MISMATCH
    Exception              CX_SY_IMPORT_MISMATCH_ERROR
    Date and Time          07/14/2010 05:23:40
    Short text
         Error when importing object "MC02M_0ITM_TAB".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLMCEX" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
          not caught in
         procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
          clause.
       Since the caller of the procedure could not have anticipated that
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing object "MC02M_0ITM_TAB", the structure did not matc
    structure of the target object. The error occurred in component
    no. 40.
    This may be due to one of the following reasons:
    - the structure is actually different (the next field has, for
      example, a different data type) or
    - the same sequence of components were exported and imported,
      but the fields were from other include units.
    Please provide me some input about how to correct the same. Also what went wrong while adding new fields..
    Thanks
    Ankur Sharma

    All modified fields should be in new append structure not in any old append structure sue to new field need new space allocation.

  • Unable to add field from structure maintanace opt for datasource(LBWE BI 7)

    Hi,
    while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
    but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
    Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
    Best regards,
    dushyant.

    It solved automaticaly,
    yes later i got that error entry still exit whic solved by deleting setup table and than try,
    thanks.
    one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
    Best Regards,
    dushyant.

  • Cant add field from structure maintanace option for  datasource(LBWE BI 7)

    Hi,
    while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
    but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
    Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
    Best regards,
    dushyant.

    It solved automaticaly,
    yes later i got that error entry still exit whic solved by deleting setup table and than try,
    thanks.
    one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
    Best Regards,
    dushyant.

  • Adding fields in MC02M_0ITM giving dump IMPORT_ALIGNMENT_MISMATCH

    Hi Experts,
    I need to add some Z custom fields in BW datasource 2LIS_02_ITM which we are doingby appending in structure MC02M_0ITM. I am activating structure and removing hide field check box also in RSA6 transaction. But when we are executing transaction RSA3 (Both Delta & Full load ) it is giving us IMPORT_ALIGNMENT_MISMATCH dump. we have removed all the queues from SMQ1 using program RMBWV302 before making changes. Please help me out in this. Following are dump details:-
    Runtime Errors IMPORT_ALIGNMENT_MISMATCH
    Exception CX_SY_IMPORT_MISMATCH_ERROR
    Date and Time 07/14/2010 05:23:40
    Short text
    Error when importing object "MC02M_0ITM_TAB".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLMCEX" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
    not caught in
    procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing object "MC02M_0ITM_TAB", the structure did not matc
    structure of the target object. The error occurred in component
    no. 40.
    This may be due to one of the following reasons:
    - the structure is actually different (the next field has, for
    example, a different data type) or
    - the same sequence of components were exported and imported,
    but the fields were from other include units.
    Please provide me some input about how to correct the same. Also what went wrong while adding new fields.

    Hi
    Delete the setup table of application '02' and fill it again, problem will be solved.
    Regards
    YuvaraajP
    Edited by: YuvaraajP on Jul 16, 2010 10:51 AM

  • Revised Podcast Browse Categories at iTunes

    Just got an email from Apple, thought I would share for anyone who hasn't heard the news:
    Greetings from the iTunes Podcasting Team:
    Today we launched a revised set of categories for podcasts listed in the iTunes Music Store. We're sending you this email to let you know how to change your podcast feed to accommodate these changes. The revised categories and subcategories are listed at the bottom of this message. Please take the time to change your podcast feed as soon as possible. Please note that we will support the use of the old category names for the next few months, so there is no immediate deadline for making these changes. We will send another message before discontinuing support for the old category names.
    When we read your RSS feed, we capture and store up to 3 category+subcategory pairs, and we use all of them to populate the browse lists that you see when you click the "Browse" link in the Music Store. However, the first category+subcategory pair listed in your feed is the most important, since it is the one listed as the Category field on your podcast page, and it is the only one used to map your podcast into the category feature pages.
    Most of the old categories and subcategories are now automatically mapped to corresponding ones within the new system. For example, if your podcast was listed under "Arts & Entertainment > Photography", it will now appear under "Arts > Visual Arts." However, 3 categories have been removed and do not have a similar replacement: "International", "Talk Radio", and "Public Radio". Those categories overlapped with others in the old system, making some podcasts difficult to find. If one of these categories is listed as the first subject in your podcast feed, that category information will be ignored and the second category will be used to determine eligibility and placement in that feature page.
    Changes to your categories may take 1-2 weeks from the time you edit your feed, so please review and add new category data as soon as possible to ensure your podcast is listed appropriately. New categories and subcategories that did not exist in the old browse structure will appear as podcasts are mapped to them.
    For specific instructions on adding categories to your page, refer to the iTunes:category section of the technical spec. Note that the spec will be updated soon with new category data, but the format is the same:
    http://www.apple.com/itunes/podcasts/techspecs.html#_Toc526931682
    The new categories and subcategories are listed below. Note that some of the new categories may not yet appear in the Music Store because they are not yet populated by podcasts.
    Best Regards--
    The iTunes Podcasting Team
    =====
    Categories are listed below, with their subcategories listed beneath them:
    Arts
    * Design
    * Fashion & Beauty
    * Food
    * Literature
    * Performing Arts
    * Visual Arts
    Business
    * Business News
    * Careers
    * Investing
    * Management & Marketing
    * Shopping
    Comedy
    Education
    * Educational Technology
    * Higher Ed
    * K-12
    * Language Courses
    * Training
    Games & Hobbies
    * Automotive
    * Aviation
    * Hobbies
    * Other Games
    * Video Games
    Government & Organizations
    * Local
    * National
    * Non-Profit
    * Regional
    Health
    * Alternative Health
    * Fitness & Nutrition
    * Self-Help
    * Sexuality
    Kids & Family
    Music
    News & Politics
    Religion & Spirituality
    * Buddhism
    * Christianity
    * Hinduism
    * Islam
    * Judaism
    * Other
    * Spirituality
    Science & Medicine
    * Medicine
    * Natural Sciences
    * Social Sciences
    Society & Culture
    * History
    * Personal Journals
    * Philosophy
    * Places & Travel
    Sports & Recreation
    * Amateur
    * College & High School
    * Outdoor
    * Professional
    Technology
    * Gadgets
    * IT News
    * Podcasting
    * Software How-To
    TV & Film
    Looks like they're finally expanding the categories out into more relevant areas for existing podcasts as well as future genres that will surely see growth over the next couple years.

    I'm having the same issues, I am recording the podcast in GarageBand and sending it to iWeb.

  • How to populate historical data in the appraisal

    Hello,
    I am working in Oracle PMS module. Our requirement is to display historical data of an employee in the next appraisal cycle.
    Eg. If there are 3 appraisal cycle in a year. In the first appraisal manager will add objectives and competencies for an employee. lets say he added competency 1 ,competency 2,Objective 1 and Objective 2. after completion of the first cycle.
    When manager initiates the second appraisal. in the objectives block 2 values (Objective 1 and Objective 2) should be auto populated. Same as in competency block 2 values (competency 1 and competency 2) should be auto populated.
    Here manager can add more objectives or competencies.
    Please suggest how this can be achived.
    Thanks in advance,
    sheetal

    Hi Shunhui
    Answers :-
    If the required fields are not available in the Maintenance link, does it mean that I have to goto SE11 and create an append structure for the extract structure MC02M_0ITM which belongs to the datasource 2LIS_02_ITM?
    Then I have to write codes in the user exit for transactional datasources in RSAP0001?
    Ans : That's correct . Once you have done this on R/3 side, replicate the data source in BW side. Activate the transfer rules with appropriate mapping for 3 new fields and also adjust the update rules so that these 3 new fields are availble in Info providers.
    Are you able to provide some information on the errors that might arise during transports with the delta being active in the production system? Will data be corrupted? Will I need to clear the delta queue before the transport goes over?
    Ans : I assume that deltas are active in Production system . There is risk to your active delta into BW .
    Before your R/3 transports reach Production system , you need to clear the delta queue that means bring the number of LUWs for 2LIS_02_ITM to zero . Also stop the delta collector job in R/3 for Application 02(purchasing). Make sure that there are no postings (transactions /users are locked) so that there will be change in purchsing base tables.
    Then send your R/3 transport into Production system (Append structure , new fields + user exit code) .Replicate on BW side. Now send the BW transports to BW production system .
    I had done this earlier for 2LIS_12_VCITM and had a step by step proceduew written with me ....will have to search for that document . Let me know your email ID , will try to send it once I find the document
    Regards
    Pradip
    (when you edit the questions , there are option buttons with which you can assign points for that you need to do log on to SDN )

  • 2LIS_02_ITM - Adding field problem

    While adding field KTWRT from LBWE to 2LIS_02_ITM ,I get the error as below.
    Entries for application 02 still exist in the extraction queue ->
    Message no. MCEX151
    Diagnosis
    Changing extraction structure MC02M_0ITM for application 02 is forbidden, because there are entries that have not yet been processed into an extraction queue for application 02 for at least one client.
    If an extraction structure is changed to the entries that are still open in an extraction queue, then these are no longer able to be read and can cause terminations with the collective update.
    Procedure
    Start the collective update using the function "Job Control" in the Logistics Extraction Structures Customizing Cockpit.
    To get an overview of the logistics extraction queues, see the Logistics Queue Overview.
    Sounds stupid ,however activities i carried out as listed below to ensure all the steps i covered.
    PS -
    <b>All the contents from LBWQ,SM13,RSA7,Setup table in all the clients available in  R/3 system has been deleted.
    Deactivated the update.
    </b>
    Any help appreciated
    Thanks
    Chetan
    @CP..

    Hi,
    I am getting the same error.
    There are no entries in LBWQ for the MCEX11 and
    also no entries in SMQ1 for application 11.
    I also ran the collective update using job control with immediate option. There were zero LUW's  that were processed.
    But, still the error is returned,
    Entries for application 11 still exist in the extraction queue ->
    Message no. MCEX151
    Diagnosis
    Changing extraction structure MC11VA0SCL for application 11 is forbidden, because there are entries that have not yet been processed into an extraction queue for application 11 for at least one client.
    If an extraction structure is changed to the entries that are still open in an extraction queue, then these are no longer able to be read and can cause terminations with the collective update.
    Procedure
    Start the collective update using the function "Job Control" in the Logistics Extraction Structures Customizing Cockpit.
    To get an overview of the logistics extraction queues, see the Logistics Queue Overview.
    Chetan, Can you please let me know,
    how you were able to resolve?
    Thanks,
    Raj

  • How does the choice of folio name affect publishing

    Getting ready to publish for the first time and wondering how the folio name or the publication name affects anything going to apple. I am guessing the publication name and folio number live on in the app navigation, but not sure about the folio name. Also, it seems the screen names for the app is limited to 12 characters or so on the iPad--I am assuming you name the app when you go to the app store to publish?
    Thanks in advance.

    The Folio Name is used internally -- it appears in the panel, but not in the viewer. The Folio Name is useful for tasks such as setting up folio renditions and linking across folios. The Publication Name and Folio Number appear in the viewer app library and in browsing structures such as the table of contents and browse mode. If you look in the library of The New Yorker app, they use "The New Yorker" for the Publication Name and "October 13, 2012" for the Folio Number. (In my DPS Tips app, I reverse it by using the folio name for Publication Name and the app name for Folio Number for aesthetic reasons. You can use these settings however you want.)
    You specify the app name when you build the app in Viewer Builder. You can use about 13 characters, more if the characters are skinny ("Illial") and fewer if the characters are wide ("WOWZOW").

  • ABAP program error for user EXIT

    Hi, I wrote code in  EXIT_SAPLRSAP_001
    When check and active it there were no syntax errors but when go rsa3 and check it gives an error at the follwing line
      it_mcekpo[] = c_t_data[].
    Runtime error: The internal talbles are neither compitable nor convertable.
    I have defined it_mcekpo as below:
    DATA  BEGIN OF IT_MCEKPO OCCURS 1.
            include structure mcekpo.
    DATA  END   OF IT_MCEKPO.
    But when I double click on 'c_t_data[]' , I get a message "object not defined, do you want do define".
    Can some one tell me how should I define this, what aption I should choose and what is the strcture.
    I am trying to add afnam, banfn and bednr from ekpo table to MC02M_0ITM (2LIS_02_ITM).
    And is there any naming convention for 'it_mcekpo' and 'c_t_data'?
    Any help is appreciated.
    (This is my first userexit)
    data: begin of it_ekpo occurs 0,
          ebeln like ekpo-ebeln,
          ebelp like ekpo-ebelp,
          afnam like ekpo-afnam,
          banfn like ekpo-banfn,
          bednr like ekpo-bednr,
         bukrs like ekpo-bukrs,
      end of it_ekpo.
    when '2LIS_02_ITM'.
      it_mcekpo[] = c_t_data[].
      select ebeln ebelp afnam banfn bednr bukrs
      from ekpo  into table it_ekpo
        for all entries in it_mcekpo
        where ebeln = it_mcekpo-ebeln and
              ebelp = it_mcekpo-ebelp.
    performance imprv.
      if not it_ekpo is initial.
         sort it_ekpo by ebeln ebelp.
      endif.
      loop at it_mcekpo.
        read table it_ekpo with key ebeln = it_mcekpo-ebeln
                                    ebelp = it_mcekpo-ebelp
                                    binary search.
        if sy-subrc = 0.
          it_mcekpo-zzafnam = it_ekpo-afnam.
          it_mcekpo-zzbanfn = it_ekpo-banfn.
          it_mcekpo-zzbednr = it_ekpo-bednr.
         it_mcekpo-zzabukrs = it_ekpo-bukrs.
       endif.
       modify it_mcekpo.
    endloop.

    Hi,
    TRY the below code :
    TYPES BEGIN OF TYPE_02ITM.
         INCLUDE STRUCTURE MC02M_0ITM.
    TYPES END OF TYPE_02ITM.
    TYPES:  BEGIN OF TYPE__ekpo,
    ebeln like ekpo-ebeln,
    ebelp like ekpo-ebelp,
    afnam like ekpo-afnam,
    banfn like ekpo-banfn,
    bednr like ekpo-bednr,
    bukrs like ekpo-bukrs,
    end of type_ekpo.
    CASE I_DATASOURCE.
    when '2LIS_02_ITM'.
    WHEN '2LIS_02_ITM'.
    DATA:
      ITAB_EKPO TYPE STANDARD TABLE OF TYPE_EKPO
           WITH HEADER LINE
           WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
    DATA:
      ITAB_02ITM TYPE STANDARD TABLE OF TYPE_02ITM
           WITH HEADER LINE
           WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
    ITAB_02ITM[] = C_T_DATA[] .
    select ebeln ebelp afnam banfn bednr bukrs
    from ekpo into table itab_ekpo
    for all entries in ITAB_02ITM
    where ebeln = ITAB_02ITM-ebeln and
    ebelp = ITAB_02ITM-ebelp.
    performance imprv.
    if not itab_ekpo is initial.
    sort itab_ekpo by ebeln ebelp.
    endif.
    loop at ITAB_02ITM.
    read table itab_ekpo with key ebeln = ITAB_02ITM-ebeln
    ebelp = ITAB_02ITM-ebelp
    binary search.
    if sy-subrc = 0.
    ITAB_02ITM-zzafnam = itab_ekpo-afnam.
    ITAB_02ITM-zzbanfn = itab_ekpo-banfn.
    ITAB_02ITM-zzbednr = itab_ekpo-bednr.
    ITAB_02ITM-zzabukrs = itab_ekpo-bukrs.
    endif.
    modify ITAB_02ITM.
    endloop.
    c_t_data[] = ITAB_02ITM[].
    With rgds,
    Anil Kumar Sharma .P

  • JSP application module releasemodule

    I encounter some problems in my JSP pages. When I start my server the first time everything works fine, but when I visit some other pages sometimes I got this error without any reason:
    Application Error
    Return
    Error Message: null
    I think it has something to do with the releasemode of the application module. Some pages has the releasemode set to statefull because I have to pass a whole rowset to the next page. Can I pass a whole rowset to the next page with releasemode set to stateless??
    Another thing that looks strange to me is that the rowset you selected is saved in the viewobject and not in the datasource. Even if you have 2 datasources with different names on the same viewobject you will always see the same rowset.
    If you make a query page and you get some resultrows from your search and then make a second page with just a browse structure. You will see in this browse page only the rows from the query of the previous page and not all the rows in the table, even if I write this <jbo:RefreshDataSource datasource="ds" />
    How is this possible, it seems to me that the RefreshDataSource tag is not working!!!
    So how can I refresh a datasource so that I can see all the rows of the table again????
    thanx,
    Lieven

    I have made these 2 test pages. When I make a search in test1.jsp and so get a part of the table as resultset and then go the test2.jsp I only see that part of the table in test2.jsp. What do I have to change or which function do I have to call to see the whole table in test2.jsp??? Changing the releasemode is not a solution because it has to stay on statefull for another part of my website.
    test1.jsp:
    <%@ page language="java" errorPage="errorpage.jsp" contentType="text/html;charset=windows-1252" %>
    <%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
    <html>
    <head>
    <META NAME="GENERATOR" CONTENT="Oracle JDeveloper">
    <LINK REL=STYLESHEET TYPE="text/css" HREF="bc4j.css">
    <TITLE>Query Form</TITLE>
    </head>
    <body>
    <jbo:ApplicationModule id="RRNAModel" definition="test.RRNAModel" releasemode="Stateful" />
    <jbo:DataSource id="ds2" appid="RRNAModel" viewobject="ElementsView1" rangesize="3" itermode="LastPagePartial"/>
    <jbo:DataHandler appid="RRNAModel" />
    <h3>ElementsView1 Query Definition</h3>
    <jbo:DataQuery datasource="ds2" />
    <jbo:OnEvent list="Search, firstSet, nextSet, previousSet, lastSet, gotoSet" >
    <h3>ElementsView1 Query Results</h3>
    <table border="0">
    <tr>
    <td ALIGN="right"><jbo:DataScroller datasource="ds2" /></td>
    </tr>
    <tr>
    <td><jbo:DataTable datasource="ds2" /></td>
    </tr>
    </table>
    </jbo:OnEvent>
    test 2
    </body>
    <jbo:ReleasePageResources />
    </html>
    test2.jsp:
    <%@ page language="java" errorPage="errorpage.jsp" contentType="text/html;charset=windows-1252" %>
    <%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
    <html>
    <head>
    <META http-equiv="Cache-Control" content="no-cache, must-revalidate">
    <META http-equiv="Pragma: no-cache">
    <META NAME="GENERATOR" CONTENT="Oracle JDeveloper">
    <LINK REL=STYLESHEET TYPE="text/css" HREF="bc4j.css">
    <TITLE>Browse Form</TITLE>
    </head>
    <body>
    <jbo:ApplicationModule id="RRNAModel" definition="test.RRNAModel" releasemode="Stateful" />
    <jbo:DataSource id="ds" appid="RRNAModel" viewobject="ElementsView1" rangesize="3" itermode="LastPagePartial"/>
    <jbo:DataHandler appid="RRNAModel" />
    <jbo:RefreshDataSource datasource="ds" />
    <h3>ElementsView1 Browse Form</h3>
    <table border="0">
    <tr>
    <td ALIGN="right"><jbo:DataScroller datasource="ds" /></td>
    </tr>
    <tr>
    <td><jbo:DataTable datasource="ds" /></td>
    </tr>
    </table>
    test 1
    <jbo:ReleasePageResources />
    </body>
    </html>
    thanx!!!
    Lieven

  • DPS HELP IN SINGLE PDF LIKE V25 AND OLDER!!!!!!!!

    WHERE IS MY BEAUTIFUL SINGLE PDF OF DPS HELP! THE CURRENT ONLINE HELPS SYSTEMS SUCKS...CAN'T LOGICALLY FIND ANYTHING...
    PLEASE I BEG YOU MAKE THE DPS HELP AVAILABLE IN PDF FORM LIKE ALL VERSIONS 25 AND OLDER...
    Message was edited by: mark@easeltraining

    The current PDF version of help (v28) has been staged, but it hasn't been pushed live yet. The posted PDF is still v26:
    http://helpx.adobe.com/pdf/digitalpubsuite_reference.pdf
    FYI, a different Adobe team is responsible for designing our help pages. I've heard that there is a redesign in progress that will provide a persistent browsing structure and include a better landing page. I don't have more details than that. Until then, I think the best way to find DPS help content is to use Google or Bing and type "dps [subject]," such as "dps sidecar" or "dps integrator id."
    If you have more specific feedback about our help pages, please contact me directly (bbringhu at adobe dot com) and I'll do what I can to fix the problem.

Maybe you are looking for