Browser and transition/effects questions

Sorry Guys n Gals, me again!
Simple q's for you all...
Firstly, when I view browser by "large icons" is there anyway I can arrange the clips by order they were captured? I can do this as a list but for some reason cant do it in "large icon" view!
Secondly, when I apply a transition or effect can I preview it (like in i-movie) before rendering it?
Thanks
Alps

Ta Gary.
Bit of a bu**er that Apple didn't allow us to have order of capture easier on icon view!! I really dont think I have the patience to re-label all my captured clips after I've captured em!!
Oh, and after I typed the [stupid] question of "how to preview effects/transitions" I realised how stupid a question it was. I think I've figured it out now!
Now just wait for my next silly question/s............
Alps

Similar Messages

Transition Effect Question

Can anyone tell me what Joe is using below to get that transition in the beginning of the following clip below:
(Its @ 7 seconds)
http://www.joe-shaw.co.uk/
it looks like light rays but each ray looks more thick in his video

A matte is similar to an Alpha channel. Using a keyer, you might pick out a particular color or brightness in an image and use it to cut a "hole" into which another image element could be placed discreetly or restrict an effect to a particular area.
Usually, everything that is black in the matte will determine where the solid background shows through. White will show the superimposed, solid foreground or the effect. Areas of gray are more or less transparent. The matte can be "flipped" to work in the opposite way too.
In many editing and compositing packages mattes can be keyframed, so that different shades or brightness values are affected over time. The poster in the linked video starts with the brightest areas and then picks up some darker values. The rays shine through the different parts of the matte as the values change.

[svn:fx-trunk] 9287: Fixes bug with shader-transition effects ( AnimateTransitionShader, Wipe, and CrossFade) when acting on targets that either have filters or are inside a hierarchy with filters .

Revision: 9287
Author:   [email protected]
Date:     2009-08-13 15:53:43 -0700 (Thu, 13 Aug 2009)
Log Message:
Fixes bug with shader-transition effects (AnimateTransitionShader, Wipe, and CrossFade) when acting on targets that either have filters or are inside a hierarchy with filters. Fix was to capture the bitmap snapshot of the target without any of its own filters applied and to then use the ShaderFilter in conjunction with the target's filters during the animation.
QE notes: Probably need more tests in this area, now that we handle it
Doc notes: none
Bugs: sdk-20250
Reviewer: Jason
Tests run: Checkintests, Mustella (spark/effects/[AnimateTransitionShader|Wipe|CrossFade])
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-20250
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/AnimateTransitionShader.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AnimateTransiti onShaderInstance.as

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

How to maintain transition effects and sound when transferring PPT to Keynote ?

When transferring Powerpoint presentations created on my windows 7 laptop to Keynote to display on my I Pad retina, I lose all transition and sound effects. Is there a solution to this ?

In the Document tab of the Inspector, select "Self-Playing" under Presentation and enter '0' (zero) for the delay times.
Now when you export to QuickTime, you will have another option in the drop-down: "Fixed Timing." (this will represent the timings you have set within the presentation. Ignore the 1-second timings, they appear to have no bearing on the finished export.)
Check "Include Slideshow Soundtrack."
From the Formats drop-down, go to "Custom..." and select "Mix Audio" from the Audio drop-down.
("Copy Audio" will give you a separate QT movie containing only the soundtrack.)
Save to wherever.

I have a G5 iMac. The browser and other apps were deleted by mistake. If I had a working browser I think I could recoverss the other apps I need. Question is .... Where to start without a browser?

I have a G5 iMac. The browser and other apps were deleted by mistake. If I had a working browser I think I could recover the other apps I need. Question is .... Where to start without a browser?

Well, go to a library or friends house & download file. Do not expand. copy to zip drive. etc.
Here is how to download iCab from the terminal. the curl command reads html page. I fished out the download link. I think you want 501. To get link, click on what download you want. In the page that comes up . Look at the http source. search for auto & copy link.
http://icab.de/dl.php
Macintosh-HD -> Applications -> Utilities -> Terminal
# copy the following line to terminal.
curl -O http://www.costantini-net.de/iCab/iCab305_UB_OSX.zip
# Or
curl -O http://icab.clauss-net.de/icab/iCab_501_UB.zip
# my termina commands. Put file in home folder.
mac $ curl -O http://www.costantini-net.de/iCab/iCab305_UB_OSX.zip
% Total    % Received % Xferd Average Speed   Time    Time     Time Current
                                 Dload Upload   Total   Spent    Left Speed
26 6592k   26 1729k    0     0 44360      0 0:02:32 0:00:39 0:01:53 40984^C
mac $ pwd
/Users/mac
mac $ ls i*
iCab305_UB_OSX.zip
mac $ ls -l i*
-rw-r--r--   1 mac staff       1M Jul 16 13:49 iCab305_UB_OSX.zip
mac $

Where can I get more filters, transitions and special effects for FC?

I thought I heard that there is a third party company that has transitions and cool effects and filters I could use with final cut express. Does anyone know who they are, and if they are creditable?
THANKS!

Oh no I don't have a problem with free and I don't think expensive things means it's better. It's just easier to install a couple discs of software then to go through a bunch of sites and sift through all the free ones. I used to use iMovie and GeeThree made it easy with all their discs. That's why I am looking for software. Plus if anything ever happens to my computer it wouldn't take any time at all to reinstall the CD then to go through and find everything again. Thank you again for your suggestions.

Media offline and loss of effects and transitions

Hello,
I have been using Premier Pro CS3 for a couple of years with an XP operating system. Most of the time I haven't had to many unusual things happening. But recently I have done some major projects and after I rendered them and then closed Premiere Pro and opened it the next day, nothing is rendered and the tranistions and any effects I may have added are no longer there and in some cases I see the "media offline" screen. I did find a work around thru the internet and some forums and that was to select all the files and move them a few frames then move them back. Everything works fine then except now I have to render everything again. My question is I recently started capturing using the detect scenes and I end up with quite a few clips whereas before I would just make one clip and cut out the sections I need. All the files are on my harddrive on the computer nothing external. Is it because I'm using detect scenes and I have so many short clips and that's the reason I have to move all the files and re-render. I called Adobe and they wouldn't give me any answers as I'm using CS3 they kept telling me to upgrade to CS5. Anyone have this type of problem and if so is there something I can do other than move all the clips and re-render? It makes me very nervous to be moving all the clips and put them back even if it's only a couple of frames. Any help would be appreciated. I do plan to upgrade to CS4 but want to know if I should quit using the detect scenes option when capturing. The only thing I do, do is to put all the clips into seperate bins in the project window. Thank you in advance for any help

something in the original project you created and the media you imported is saying, " The stuff is located HERE...and it's not finding the stuff THERE...." or you actually chose to use the media offline ( unlikely ).
You did SOMETHING somewhere along the way to confuse the program about where the stuff is located....
I don't use CS3 to capture stuff but use ScLive ( for sd work , not hd ) , and it is set up to make a clip for every time it sees the timecode indicate the camera was shut off and turned on ( scene detect on )....
That gives me a lot of clips in the folder I selected to capture to.
When I import those clips to a project ( usually in the same folder structure so I dont get confused where things are )..I then LEAVE the assets there and dont move them ....or the program won't be able to find them properly ( the link is lost if you move the stuff )...and it then is either prompting me where it is or it is seen as offline ( If I choose to ignore prompt to find it )...
hope this helps

Please add Image and Page Transition Effects/Widgets

Please add Image and Page Transition Effects/Widgets
Thanks
- Roland

Hello,
You can try the following:-
1) Add a composition widget.
2) Add text frames to the triggers to create first level of menu.
3) To the target of trigger in first level, add another composition widget.
4) The triggers of this new composition will be the next level of menu.
5) You need to set the 'Show target' value to 'On rollover'
Hope this helps.
Regards,
Neha

I am unable to get all keynote transition and slide effect feature in ibook keynote widget. Can it be possible to see same presentation in ibook as was in keynote?

I am unable to get all keynote transition and slide effect features in ibook keynote widget. Can it be possible to see same presentation in ibook as was in keynote?

This Apple Support Document has details on the subset of Keynote transitions which can be used in iBooks Author.
Here are the details:
Transitions and builds
These transitions and builds work with the Keynote widget:
Transitions:
Magic move
Cube
Dissolve
Drop
Flip
Motion dissolve
Move in
Pivot
Push
Reveal
Scale
Twirl
Builds:
Appear/disappear
Cube
Dissolve
Drop
Move in/out
Pivot
Scale
Twirl
Unsupported builds and transitions will be replaced with Dissolve.

THOUGH I DO NOT ACTIVATE THE FIRST LINE "BROWSING AND DOWNLOAD HISTORY", MY DOWNLOADS ARE NEVERTHELESS DELETED. I JUST POSTED THIS QUESTION AND GOT 2 REPLI

When I do a "CLEAR RECENT HISTORY" and THOUGH I DO NOT ACTIVATE THE FIRST LINE "BROWSING AND DOWNLOAD HISTORY", MY DOWNLOADS ARE NEVERTHELESS DELETED.
I just posted this question under the "OTHER" category and got 2 replies, neither of which solves this problem!
IS THERE A SOLUTION? Thanks

Are you the same poster as Raphaex who posted using Windows 8.1 in this thread and provided a full and detailed set of data accessible using the "More System Details" link: https://support.mozilla.org/questions/1011435 ??
If not, could you provide a link to the earlier discussion on your situation if there is one? I don't want to repeat what you haven't found helpful, and also, it's critical to know your correct configuration information and not waste everyone's time typing out advice that is totally irrelevant.
To provide the missing details on your configuration:
# Use ONE of these methods to open the Firefox Troubleshooting Information page:
#* Click the "3-bar" menu button [[Image:New Fx Menu]], click on help [[Image:Help-29]] and select ''Troubleshooting Information''.
#* Type '''about:support''' into the Firefox address bar and press the enter key.
# In the top left corner of the Troubleshooting Information page that comes up, you should see a button that says "Copy text to clipboard". Click it.
#Now, come back to this thread, right-click in the reply box and select '''Paste''' from the context menu (or else click inside the reply box and press Command+v) to paste all the information you copied into the forum post.
Usually, this does not contain personal information, but I suggest you skim down and make sure you do not see your email address in there (XX it out ).

Since the latest download the soft keyboard lags BAD when typing,especially if I' m in a browser and trying to reply to some post. It's lagging as I type this, though not as bad as usual. Most of the time it is effectively useless it drops so much.

when typing,especially if I' m in a browser and trying to reply to some post. It's lagging as I type this, though not as bad as usual. Most of the time it is effectively useless it drops so many characters. Anyone else having this problem?

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Question about Workflow between Premiere and After Effects

Hey guys, I have Production Premium CS5 (Premiere and AE)
One thing that has always confused me was basic workflow between these 2 products. Is it best to get your clips, but them into sequence, do the basic effects that Premiere supports and output into the highest quality video in order to take into AE and apply effects to?
Or should I take video footage, do my After Effects work, export that as a clip that will then be used in the video composition in Premiere? I know I don't want to move a project too many times between because of compression, so what would the most optimized workflow be?
FYI, I am doing a lot of video game frag movies, so I have a lot of effects I like to put into it.

Really?
I'm always amazed at Photoshop's cold boot startup time. On my rig it takes 8 seconds. From a warm boot, Photoshop will start in 2-4 seconds.
This isn't the case with my video editing software though...
Sony Vegas 8.1 (looking to learn Premiere so I don't need this anymore - Cold Boot : 8 seconds, Warm Boot : 3 seconds)
After Effects (Cold Boot : 22 seconds, Warm Boot : 8 seconds)
Premiere (Cold Boot : 48 seconds, Warm Boot : 16 seconds)
Premiere seems to be a beast of a program; I'm rather surprised, I thought AE would be the more intense one. Sorry, I haven't yet overcome my fears of losing projects/data because I'm running on a Windows machine.
It's half the reason why I have a Mozy account to backup my files to an online resource.

I know this may be a lame question, but can I use Thunderbird with my Chrome browser and gmail account?

I don't presently have firefox browser and have been very comfortable with Chrome for years now; can I use Thunderbird with my Chrome browser? I want to manage a large mailing list for a non-profit group that wants me to use Thunderbird.
thank you,
Reuben

If you got someone else email than that's a BIG error and it has nothing to do with whatever client you are using. You send your credentials to gmail and they connected to another account, not even Google would like to do that.
Either you send the wrong credentials and then you happend to have the same password as this other account. Try using webmail on that account.
Change your password!!! If you can access that account he/she can access yours.

N97 Transition Effect Problem

As you all know that the N97 user interface is not attractive due to the lack of the real transition effects, my 5800 have a nice iphone like transitions, but for the N97 the transition effect is very simple! Only some sliding menus and that’s it!! I wonder where is the screen orientation swivel effect we've seen in early N97 prototype videos? However, once I enable the transition effects on my N97 it will start to become unstable with crashes and it will affect some other programs like the photo gallery (will hang sometimes and gives low res pictures or just the whole program will go to the background while using the zoom button!) and the Web browser will start to display mid and large websites without images!!! I tried to reload the page so many times but only the text appears without any image! After trying so many times at last the page loaded successfully with all images but my happiness didn't last as I discovered that the phone turned off the transition effects automatically! When I went to the themes menu to check, it was turned on but actually it’s not working as the phone disabled it in order to load the web page! It happened to my three times since I updated my firmware last week (V 11)! I think this is because of the lack of enough RAM, I removed all the online widgets from the home screen (like facebook and accuweather) and just used contacts, programs, calendar, email, and music shortcuts which gave me additional 5 MB of free RAM and the phone felt more stable but still can’t handle the transition effects and proper Web pages display simultaneously! My 5800 handles web pages better and display all images even if the transition effects are turned on! I hope Nokia will fix these issues and gives us an option to disable the Widgets and Kinetic scrolling (Make the UI just like the 5800) in order to have more free RAM and enjoy full transition effects and proper Web Browsing with better stability just like the 5800.
Message Edited by ahmadddd on 07-Jul-2009 07:17 AM
Message Edited by ahmadddd on 07-Jul-2009 07:17 AM

Any updates on the effects? I wrote to Nokia support, I'm in Russia, they replied.
I have illustrated my question with the links to youtube where it is clearly visible how the UI rotates and other animation effects when opening the widgets.
My translation of the official reply:
"In firmware version 11 those effects do work! Try to resent the phone to the factory settings by typing: *#7780#, standard lock code is - 12345 or try to format the phone memory. Do your data and contacts back up using PC Suite . enter *#7370# (formats phone memory), enter the code 12345 the phone will resent. Then restore your back up."
Message Edited by takemori on 09-Jul-2009 04:19 PM

Adding a RAID card to help speed up export (and other drive question) in Premiere Pro CC

First of all, I have read Tweakers Page exporting section because that is where my primary concern is. First my questions, then background and my current and proposed configurations:
Question 1: Will adding a hardware RAID controller, such as an LSI MegaRAID remove enough burden from the CPU managing parity on my software RAID 5 that the CPU will jump for joy and export faster?
Question 2: If true to above, then compare thoughts on adding more smaller SSDs for either a one volume RAID 0 or smaller two volume RAID 0 to complement existing HDD RAID 5. That is, I'm thinking of buying four Samsung 850 Pro 128 GB SSDs to put in a four disk volume to handle everything (media/projects, media cache, previews, exports), or split it up into two volumes of two disks each and split the duties, or keep the four disk volume idea and put the previews & exports on my HDD RAID 5 array.
The 850's are rated at SEQ read/write: 550/470 MB/s thus I could get around 2000/1500 MB/s read write in a four disk RAID 0 or 1/2 that if I split into two volumes to minimize volumes from reading/writing at the same time, if that really matters with these SSDs?
The Tweaker's page made a few comments. One is splitting duties among different disks, rather than a large efficient RAID may actually slow things down. Since the SSDs are much faster than a single HDD, I'm thinking that is no longer accurate, thus I'm leaning toward the Four disk configuration putting OS & Programs on C drive, Media & Projects on D (HDD RAID 5), Pagefile & Media Cache on SSD (2-disk RAID 0) and Previews &Exports on 2nd SSD RAID 0 (or combine the two RAID 0's and their duties).
Just trying to get a perspective here, since I haven't purchased anything yet. Any experience/stories, I would appreciate.
My current drive configuration:
My D drive is software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM HDDs with a CrystalDiskMark SEQ Read/Write of 339/252 MB/s.
The C drive is SSD 500 GB (Samsung 840 (not Pro) and does 531/330 MB/s. My OS, Program Files and Page File are on C, and data/media files/project, etc all are on the RAID drive.
Problem:
Current setup allows for smooth editing, only the exporting seems slow, often taking between two and two and a half times the video length to export. Thus a 10 minute video takes 20-30 minutes to export. 15 minute video can take 30-40 minutes to export. The first 10% of the two-pass export takes under a minute (seems fast), but it gets slower where the final 10 or 20% can hang for many minutes like my system is running out of steam. So where is the waste?
I have enabled hardware acceleration (did the GPU hack since my GPU isn't listed) and it may spike at 25% usage a few times and eat up 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is idle the whole export. The CPU may spike at 50% but it doesn't seem overly busy either.
Our timeline is simple with two video streams and two audio streams (a little music and mostly voice) with simple transitions (jump cuts or cross dissolves). We sometimes fast color correct, so that might use the GPU? Also, since we film in 1080 60P and export 1080 29.97 frames/sec, I think that is scaling and uses the GPU. I know without the GPU, it does take a lot longer. I have ruled out buying a faster GPU since it doesn't appear to be breaking a sweat. I just need to know if my system is bottlenecked at the hard drive level because I'm using software RAID and my disks are slow and will hardware RAID significantly reduce the CPU load so it can export faster.
Our files are not huge in nature. Most our clips are several MBs each. Total project files are between 5 GBs and 10 GBs for each video with Windows Media File export being 500 MB to 1.2 GB on average. We shoot using Panasonic camcorders so the original files are AVCHD, I believe (.MTS files?).
Considerations:
1. I'm thinking of buying (and future proofing) an LSI Logic MegaRAID 9361-8i that is 12Gb/s SAS and SATA (because some current SSDs can exceed the 6Gb/s standard).
2. I'm not replacing my current RAID 5 HDDs because not in my budget to upgrade to 6 or more large SSDs. These drives are more important to me for temporary storage because I remove the files once backed up. I don't mind a few inexpensive smaller SSDs if they can make a significant difference for editing and exporting.
I can only guess my HDD RAID is slow but the CPU is burdened with parity. I would imagine running RAID 10 would not help much.
My setup:
my setup:
CPU - i7-3930K CPU @4.5 GHz
RAM - G.SKILL Ripjaws Z Series 32GB (4 x 8GB) DDR3 2133 @2000
Motherboard - ASUS P9X79 WS LGA 2011
GPU - Gigabyte GeForce GTX 660 OC 2GB (performed the compatibility list hack to enable hardware acceleration).
C drive - 500 GB Samsung 840 SSD (Windows 7 Pro 64 bit and programs).
D drive - four 1 TB WD RE4 Enterprise HDDs 7200 RPMs in software RAID 5
Case - Cooler Master HAF X
CPU Fan - Cooler Master Hyper 212 EVO with 120 mm fan
Power Supply - Corsair Pro Series AX 850 Watt 80 Plus Gold
Optical Drive - Pioneer BDR - 208DBK
thanks in advance,
Eric

........software RAID 5 off the motherboard ??????......NOT a good idea, from what I have read here on this forum from experts like Harm Millard and others. They have mentioned a LARGE overhead on the CPU doing this....causing sub-par performance. RAID 0 off the motherboard will NOT do this, however.....RAID 0 would provide optimum speed, but, with the risk of total data loss if ANY drive fails. You may wish to reconfigure your RAID to be RAID 0...BUT...you would need to DILIGENTLY back up its entire volume onto perhaps a quality 4TB drive very frequently.
A lot depends on the nature of your current and FUTURE codecs you plan to edit. You may not want to sink a lot of money into an older setup that may have trouble with more demanding future codecs. For now, in the 1080p realm, your rig should be OK....the read/write performance on your CURRENT RAID 5 setup is not great, and a definite drag on the performance. The rest of your components appear to be fine.....the Samsung SSD, though not ideal, is OK.....it's write speed is WAY lower than the Pro model,but, the drive is used mainly for reading operations. Since you have Windows 7 Pro, and NOT Windows 8.......you CAN put the entire windows page file onto the RAID 0 you might create.....this will take that frequent read/write load OFF the SSD. Read the "tweakers Page" to see how to best TUNE your machine. To use your current setup most efficiently, without investing much money, you would :a. create the RAID 0 off the motherboard, ( putting all media and project files on it ) b. install a quality 7200rpm 4TB HDD to serve as a BACKUP of the RAID array. Then, install a Crucial M550 256GB or larger SSD, ( close in performance to Samsung 850 Pro...much cheaper), to put all previews, cache , and media cache files on....AND to use as " global performance cache" for After Effects...if you use that program. Exporting can be done to ANOTHER Crucial M550 for best speed...or, just to the either the FIRST Crucial or, the 4TB drive. Your current GPU will accelerate exports on any video containing scaling and any GPU accelerated effects. Your CPU is STILL important in SERVING the data to and from the GPU AND for decoding and encoding non-GPU handled video....your high CPU clock speed helps performance there ! You may want to check out possibly overclocking your video card, using MSI Afterburner.or, similar free program. Increasing the "memory clock speed" can RAISE performance and cut export times on GPU effects loaded timelines,or, scaling operations. On my laptop, I export 25% faster doing this. With my NEW i7 4700 HQ laptop, I export in the range of your CURRENT machine....about 2 to 3 times the length of the original video. PROPERLY SET UP...your desktop machine should BLOW THIS AWAY !!
Visit the PPBM7 website and test your current setup to possibly identify current bottlenecks,or, performance issues. THEN, RE-TEST it again, after making improvements to your machine to see how it does. Be aware that new codecs are coming (H.265 and HEVC,etc.) which may demand more computer horsepower to edit, as they are even MORE compressed and engineered for "streaming" high quality at a lower bandwidth on the internet. The new Haswell E...with its quad-channel memory, 8 core option, large number of PCI gen. 3 lanes, goes farther in being prepared for 4K and more. Testing by Eric Bowen has shown the newer PPro versions provide MUCH better processing of 4K than older versions.

Browser and transition/effects questions

Similar Messages

Maybe you are looking for